[ 0.000000] Linux version 2.6.32.35-xen-next-2.6.32.x-20110325 (root@serveerstertje) (gcc version 4.4.5 (Debian 4.4.5-8) ) #2 SMP Fri Mar 25 19:59:56 CET 2011 [ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro nomodeset vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 acpi_enforce_resources=lax xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000030000000 (usable) [ 0.000000] Xen: 0000000030000000 - 00000000aff90000 (unusable) [ 0.000000] Xen: 00000000aff90000 - 00000000aff9e000 (ACPI data) [ 0.000000] Xen: 00000000aff9e000 - 00000000affe0000 (ACPI NVS) [ 0.000000] Xen: 00000000affe0000 - 00000000b0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fec20000 - 00000000fec21000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 00000002b0000000 (usable) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x2b0000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] last_pfn = 0x30000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000030000000 (usable) [ 0.000000] modified: 0000000030000000 - 00000000aff90000 (unusable) [ 0.000000] modified: 00000000aff90000 - 00000000aff9e000 (ACPI data) [ 0.000000] modified: 00000000aff9e000 - 00000000affe0000 (ACPI NVS) [ 0.000000] modified: 00000000affe0000 - 00000000b0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fec20000 - 00000000fec21000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 00000002b0000000 (usable) [ 0.000000] initial memory mapped : 0 - 027c3000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000030000000 [ 0.000000] 0000000000 - 0030000000 page 4k [ 0.000000] kernel direct mapping tables up to 30000000 @ 100000-282000 [ 0.000000] init_memory_mapping: 0000000100000000-00000002b0000000 [ 0.000000] 0100000000 - 02b0000000 page 4k [ 0.000000] kernel direct mapping tables up to 2b0000000 @ 295d000-3ee9000 [ 0.000000] RAMDISK: 01e13000 - 027c2a00 [ 0.000000] ACPI: RSDP 00000000000fb100 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000aff90000 00048 (v01 MSI OEMSLIC 20100913 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000aff90200 00084 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000aff905e0 09427 (v01 A7640 A7640100 00000100 INTL 20051117) [ 0.000000] ACPI: FACS 00000000aff9e000 00040 [ 0.000000] ACPI: APIC 00000000aff90390 00088 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000aff90420 0003C (v01 7640MS OEMMCFG 20100913 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000aff90460 00176 (v01 MSI OEMSLIC 20100913 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000aff9e040 00072 (v01 7640MS A7640100 20100913 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000aff9a5e0 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: HPET 00000000aff9a6f0 00038 (v01 7640MS OEMHPET 20100913 MSFT 00000097) [ 0.000000] ACPI: IVRS 00000000aff9a730 00100 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.000000] ACPI: SSDT 00000000aff9a830 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 02b0000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0002944000 - 000295d000] XEN PAGETABLES ==> [0002944000 - 000295d000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001ce8868] TEXT DATA BSS ==> [0001000000 - 0001ce8868] [ 0.000000] #4 [0001e13000 - 00027c2a00] RAMDISK ==> [0001e13000 - 00027c2a00] [ 0.000000] #5 [00027c3000 - 0002944000] XEN START INFO ==> [00027c3000 - 0002944000] [ 0.000000] #6 [0100000000 - 02b0000000] XEN EXTRA ==> [0100000000 - 02b0000000] [ 0.000000] #7 [0001ce9000 - 0001cf510b] BRK ==> [0001ce9000 - 0001cf510b] [ 0.000000] #8 [0000100000 - 0000266000] PGTABLE ==> [0000100000 - 0000266000] [ 0.000000] #9 [000295d000 - 00036e4000] PGTABLE ==> [000295d000 - 00036e4000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x002b0000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00030000 [ 0.000000] 0: 0x00100000 -> 0x002b0000 [ 0.000000] On node 0 totalpages: 1965967 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 361 pages reserved [ 0.000000] DMA zone: 3566 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 178232 pages, LIFO batch:31 [ 0.000000] Normal zone: 24192 pages used for memmap [ 0.000000] Normal zone: 1745280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 6, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 7, version 0, address 0xfec20000, GSI 24-24 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 280 [ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:4ec00000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1.0 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880028038000 s83352 r8192 d23144 u114688 [ 0.000000] pcpu-alloc: s83352 r8192 d23144 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1927078 [ 0.000000] Kernel command line: root=/dev/mapper/serveerstertje-root ro nomodeset vga=794 video=vesafb earlyprintk=xen max_loop=255 loop_max_part=63 acpi_enforce_resources=lax xen-pciback.hide=(03:06.0)(04:00.0)(04:00.1)(04:00.2)(04:00.3)(04:00.4)(04:00.5)(04:00.6)(04:00.7)(0a:00.0)(0a:00.1)(0a:00.2)(0a:00.3)(0a:00.4)(0a:00.5)(0a:00.6)(0a:00.7)(05:00.0)(05:00.1)(07:01.0)(07:01.1)(07:01.2) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] DMA: software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880024060000 size=32768 [ 0.000000] Memory: 558500k/11272192k available (7480k kernel code, 3408324k absent, 7304700k reserved, 4045k data, 796k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1792 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=3 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 1 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] alloc irq_desc for 1791 on node -1 [ 0.000000] alloc kstat_irqs on node -1 [ 0.000000] Detected 53864.503 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.32 BogoMIPS (lpj=12800656) [ 0.004014] Security Framework initialized [ 0.004020] SELinux: Initializing. [ 0.004026] SELinux: Starting in permissive mode [ 0.004040] Mount-cache hash table entries: 256 [ 0.004183] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004187] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004192] tseg: 0000000000 [ 0.004198] CPU: Physical Processor ID: 0 [ 0.004208] CPU: Processor Core ID: 0 [ 0.004212] mce: CPU supports 6 MCE banks [ 0.004235] SMP alternatives: switching to UP code [ 0.035457] ACPI: Core revision 20090903 [ 0.050932] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.050938] ftrace: allocating 27574 entries in 109 pages [ 0.052063] alloc irq_desc for 1790 on node -1 [ 0.052066] alloc kstat_irqs on node -1 [ 0.052074] alloc irq_desc for 1789 on node -1 [ 0.052075] alloc kstat_irqs on node -1 [ 0.052079] alloc irq_desc for 1788 on node -1 [ 0.052080] alloc kstat_irqs on node -1 [ 0.052083] alloc irq_desc for 1787 on node -1 [ 0.052085] alloc kstat_irqs on node -1 [ 0.052306] installing Xen timer for CPU 1 [ 0.052309] alloc irq_desc for 1786 on node -1 [ 0.052311] alloc kstat_irqs on node -1 [ 0.052338] SMP alternatives: switching to SMP code [ 0.076001] alloc irq_desc for 1785 on node -1 [ 0.076001] alloc kstat_irqs on node -1 [ 0.076006] alloc irq_desc for 1784 on node -1 [ 0.076008] alloc kstat_irqs on node -1 [ 0.076011] alloc irq_desc for 1783 on node -1 [ 0.076013] alloc kstat_irqs on node -1 [ 0.076024] alloc irq_desc for 1782 on node -1 [ 0.076025] alloc kstat_irqs on node -1 [ 0.004000] Initializing CPU#1 [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.076179] installing Xen timer for CPU 2 [ 0.076196] alloc irq_desc for 1781 on node -1 [ 0.076197] alloc kstat_irqs on node -1 [ 0.076220] alloc irq_desc for 1780 on node -1 [ 0.076222] alloc kstat_irqs on node -1 [ 0.076225] alloc irq_desc for 1779 on node -1 [ 0.076227] alloc kstat_irqs on node -1 [ 0.076230] alloc irq_desc for 1778 on node -1 [ 0.076232] alloc kstat_irqs on node -1 [ 0.076235] alloc irq_desc for 1777 on node -1 [ 0.076237] alloc kstat_irqs on node -1 [ 0.004000] Initializing CPU#2 [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.076391] installing Xen timer for CPU 3 [ 0.076399] alloc irq_desc for 1776 on node -1 [ 0.076401] alloc kstat_irqs on node -1 [ 0.076420] alloc irq_desc for 1775 on node -1 [ 0.076422] alloc kstat_irqs on node -1 [ 0.076425] alloc irq_desc for 1774 on node -1 [ 0.076427] alloc kstat_irqs on node -1 [ 0.076430] alloc irq_desc for 1773 on node -1 [ 0.076432] alloc kstat_irqs on node -1 [ 0.076435] alloc irq_desc for 1772 on node -1 [ 0.076437] alloc kstat_irqs on node -1 [ 0.004000] Initializing CPU#3 [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.076582] installing Xen timer for CPU 4 [ 0.076590] alloc irq_desc for 1771 on node -1 [ 0.076592] alloc kstat_irqs on node -1 [ 0.076611] alloc irq_desc for 1770 on node -1 [ 0.076613] alloc kstat_irqs on node -1 [ 0.076616] alloc irq_desc for 1769 on node -1 [ 0.076618] alloc kstat_irqs on node -1 [ 0.076629] alloc irq_desc for 1768 on node -1 [ 0.076630] alloc kstat_irqs on node -1 [ 0.076634] alloc irq_desc for 1767 on node -1 [ 0.076635] alloc kstat_irqs on node -1 [ 0.004000] Initializing CPU#4 [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 4 [ 0.076771] installing Xen timer for CPU 5 [ 0.076782] alloc irq_desc for 1766 on node -1 [ 0.076783] alloc kstat_irqs on node -1 [ 0.076830] alloc irq_desc for 1765 on node -1 [ 0.076832] alloc kstat_irqs on node -1 [ 0.076836] alloc irq_desc for 1764 on node -1 [ 0.076838] alloc kstat_irqs on node -1 [ 0.076842] alloc irq_desc for 1763 on node -1 [ 0.076844] alloc kstat_irqs on node -1 [ 0.076848] alloc irq_desc for 1762 on node -1 [ 0.076850] alloc kstat_irqs on node -1 [ 0.004000] Initializing CPU#5 [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 5 [ 0.077030] Brought up 6 CPUs [ 0.077047] CPU0 attaching sched-domain: [ 0.077050] domain 0: span 0-5 level CPU [ 0.077053] groups: 0 1 2 3 4 5 [ 0.077062] CPU1 attaching sched-domain: [ 0.077064] domain 0: span 0-5 level CPU [ 0.077067] groups: 1 2 3 4 5 0 [ 0.077076] CPU2 attaching sched-domain: [ 0.077078] domain 0: span 0-5 level CPU [ 0.077080] groups: 2 3 4 5 0 1 [ 0.077088] CPU3 attaching sched-domain: [ 0.077090] domain 0: span 0-5 level CPU [ 0.077093] groups: 3 4 5 0 1 2 [ 0.077101] CPU4 attaching sched-domain: [ 0.077103] domain 0: span 0-5 level CPU [ 0.077105] groups: 4 5 0 1 2 3 [ 0.077113] CPU5 attaching sched-domain: [ 0.077115] domain 0: span 0-5 level CPU [ 0.077118] groups: 5 0 1 2 3 4 [ 0.077178] Grant table initialized [ 0.077178] regulator: core version 0.5 [ 0.077178] NET: Registered protocol family 16 [ 0.077178] alloc irq_desc for 1761 on node -1 [ 0.077178] alloc kstat_irqs on node -1 [ 0.077178] node 0 link 0: io port [1000, ffffff] [ 0.077178] TOM: 00000000b0000000 aka 2816M [ 0.077178] Fam 10h mmconf [e0000000, efffffff] [ 0.077178] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.077178] node 0 link 0: mmio [f0000000, ffffffff] [ 0.077178] node 0 link 0: mmio [a0000, bffff] [ 0.077178] node 0 link 0: mmio [b0000000, dfffffff] [ 0.077178] TOM2: 0000000250000000 aka 9472M [ 0.077178] bus: [00,07] on node 0 link 0 [ 0.077178] bus: 00 index 0 io port: [0, ffff] [ 0.077178] bus: 00 index 1 mmio: [f0000000, ffffffff] [ 0.077178] bus: 00 index 2 mmio: [a0000, bffff] [ 0.077178] bus: 00 index 3 mmio: [b0000000, dfffffff] [ 0.077178] bus: 00 index 4 mmio: [250000000, fcffffffff] [ 0.080047] ACPI: bus type pci registered [ 0.080066] sync cpu 0 get result 1 max_id 5 [ 0.080066] sync cpu 1 get result 1 max_id 5 [ 0.080066] sync cpu 2 get result 1 max_id 5 [ 0.080066] sync cpu 3 get result 1 max_id 5 [ 0.080066] sync cpu 4 get result 1 max_id 5 [ 0.080066] sync cpu 5 get result 1 max_id 5 [ 0.080066] alloc irq_desc for 1760 on node -1 [ 0.080066] alloc kstat_irqs on node -1 [ 0.080066] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.080066] PCI: Not using MMCONFIG. [ 0.080066] PCI: Using configuration type 1 for base access [ 0.080066] PCI: Using configuration type 1 for extended access [ 0.092040] bio: create slab at 0 [ 0.096571] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.096626] ACPI: EC: Look up EC in DSDT [ 0.099519] ACPI: Executed 3 blocks of module-level executable AML code [ 0.113010] ACPI: Interpreter enabled [ 0.113015] ACPI: (supports S0 S5) [ 0.113036] ACPI: Using IOAPIC for interrupt routing [ 0.113102] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.114359] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 0.114366] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.114373] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node ffff8800278b0240), AE_NOT_EXIST [ 0.114396] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D0._STA] (Node ffff8800278b0240), AE_NOT_EXIST [ 0.114420] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 0.114427] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.114433] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node ffff8800278b0320), AE_NOT_EXIST [ 0.114455] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D1._STA] (Node ffff8800278b0320), AE_NOT_EXIST [ 0.114474] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 0.114481] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.114487] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node ffff8800278b0500), AE_NOT_EXIST [ 0.114516] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D0._STA] (Node ffff8800278b0500), AE_NOT_EXIST [ 0.114533] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 0.114539] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.114545] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node ffff8800278b05e0), AE_NOT_EXIST [ 0.114567] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D1._STA] (Node ffff8800278b05e0), AE_NOT_EXIST [ 0.116469] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.138865] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.152259] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 0.152259] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.152259] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node ffff8800278b0240), AE_NOT_EXIST [ 0.152259] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 0.152259] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.152259] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node ffff8800278b0320), AE_NOT_EXIST [ 0.156032] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 0.156032] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.156035] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node ffff8800278b0500), AE_NOT_EXIST [ 0.156077] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 0.156083] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.156089] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node ffff8800278b05e0), AE_NOT_EXIST [ 0.156184] ACPI Warning: Incorrect checksum in table [OEMB] - B2, should be B1 (20090903/tbutils-314) [ 0.156395] ACPI: No dock devices found. [ 0.156784] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.156822] PCI: Scanning bus 0000:00 [ 0.156822] pci 0000:00:00.0: found [1002:5a11] class 000600 header type 00 [ 0.156822] pci 0000:00:00.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.156822] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.156822] pci 0000:00:00.2: found [1002:5a23] class 000806 header type 00 [ 0.156822] pci 0000:00:00.2: calling quirk_no_ata_d3+0x0/0x20 [ 0.156822] pci 0000:00:00.2: calling quirk_resource_alignment+0x0/0x1bb [ 0.156822] pci 0000:00:02.0: found [1002:5a16] class 000604 header type 01 [ 0.156822] pci 0000:00:02.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.156822] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.156822] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.156822] pci 0000:00:02.0: PME# disabled [ 0.156822] pci 0000:00:03.0: found [1002:5a17] class 000604 header type 01 [ 0.156822] pci 0000:00:03.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.156822] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.156822] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.156822] pci 0000:00:03.0: PME# disabled [ 0.156822] pci 0000:00:05.0: found [1002:5a19] class 000604 header type 01 [ 0.156822] pci 0000:00:05.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.156822] pci 0000:00:05.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.156822] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.156822] pci 0000:00:05.0: PME# disabled [ 0.156822] pci 0000:00:06.0: found [1002:5a1a] class 000604 header type 01 [ 0.156822] pci 0000:00:06.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.156822] pci 0000:00:06.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.156822] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.156822] pci 0000:00:06.0: PME# disabled [ 0.156822] pci 0000:00:0a.0: found [1002:5a1d] class 000604 header type 01 [ 0.156822] pci 0000:00:0a.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.156822] pci 0000:00:0a.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.156822] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.156822] pci 0000:00:0a.0: PME# disabled [ 0.156822] pci 0000:00:0b.0: found [1002:5a1f] class 000604 header type 01 [ 0.156822] pci 0000:00:0b.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.156822] pci 0000:00:0b.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.156843] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.156848] pci 0000:00:0b.0: PME# disabled [ 0.156880] pci 0000:00:0d.0: found [1002:5a1e] class 000604 header type 01 [ 0.156888] pci 0000:00:0d.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.156910] pci 0000:00:0d.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.156932] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold [ 0.156937] pci 0000:00:0d.0: PME# disabled [ 0.156979] pci 0000:00:11.0: found [1002:4390] class 000101 header type 00 [ 0.157003] pci 0000:00:11.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.157014] pci 0000:00:11.0: reg 10 io port: [0x7000-0x7007] [ 0.157022] pci 0000:00:11.0: reg 14 io port: [0x6000-0x6003] [ 0.157036] pci 0000:00:11.0: reg 18 io port: [0x5000-0x5007] [ 0.157044] pci 0000:00:11.0: reg 1c io port: [0x3000-0x3003] [ 0.157051] pci 0000:00:11.0: reg 20 io port: [0x2000-0x200f] [ 0.157059] pci 0000:00:11.0: reg 24 32bit mmio: [0xf98ff000-0xf98ff3ff] [ 0.157071] pci 0000:00:11.0: calling quirk_amd_ide_mode+0x0/0xd9 [ 0.157082] pci 0000:00:11.0: set SATA to AHCI mode [ 0.157085] pci 0000:00:11.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.157146] pci 0000:00:12.0: found [1002:4397] class 000c03 header type 00 [ 0.157151] pci 0000:00:12.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.157162] pci 0000:00:12.0: reg 10 32bit mmio: [0xf98fb000-0xf98fbfff] [ 0.157201] pci 0000:00:12.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.157231] pci 0000:00:12.2: found [1002:4396] class 000c03 header type 00 [ 0.157250] pci 0000:00:12.2: calling quirk_no_ata_d3+0x0/0x20 [ 0.157261] pci 0000:00:12.2: reg 10 32bit mmio: [0xf98ff400-0xf98ff4ff] [ 0.157307] pci 0000:00:12.2: calling quirk_resource_alignment+0x0/0x1bb [ 0.157331] pci 0000:00:12.2: supports D1 D2 [ 0.157333] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.157339] pci 0000:00:12.2: PME# disabled [ 0.157364] pci 0000:00:13.0: found [1002:4397] class 000c03 header type 00 [ 0.157369] pci 0000:00:13.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.157387] pci 0000:00:13.0: reg 10 32bit mmio: [0xf98fc000-0xf98fcfff] [ 0.157426] pci 0000:00:13.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.157449] pci 0000:00:13.2: found [1002:4396] class 000c03 header type 00 [ 0.157475] pci 0000:00:13.2: calling quirk_no_ata_d3+0x0/0x20 [ 0.157486] pci 0000:00:13.2: reg 10 32bit mmio: [0xf98ff800-0xf98ff8ff] [ 0.157525] pci 0000:00:13.2: calling quirk_resource_alignment+0x0/0x1bb [ 0.157584] pci 0000:00:13.2: supports D1 D2 [ 0.157585] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.157591] pci 0000:00:13.2: PME# disabled [ 0.157617] pci 0000:00:14.0: found [1002:4385] class 000c05 header type 00 [ 0.157622] pci 0000:00:14.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.157625] pci 0000:00:14.0: calling sb600_disable_hpet_bar+0x0/0x60 [ 0.157671] pci 0000:00:14.0: calling force_disable_hpet_msi+0x0/0x20 [ 0.157674] pci 0000:00:14.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.157688] pci 0000:00:14.1: found [1002:439c] class 000101 header type 00 [ 0.157694] pci 0000:00:14.1: calling quirk_no_ata_d3+0x0/0x20 [ 0.157704] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.157712] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.157719] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.157734] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.157741] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.157759] pci 0000:00:14.1: calling quirk_resource_alignment+0x0/0x1bb [ 0.157776] pci 0000:00:14.3: found [1002:439d] class 000601 header type 00 [ 0.157781] pci 0000:00:14.3: calling quirk_no_ata_d3+0x0/0x20 [ 0.157834] pci 0000:00:14.3: calling quirk_resource_alignment+0x0/0x1bb [ 0.157849] pci 0000:00:14.4: found [1002:4384] class 000604 header type 01 [ 0.157854] pci 0000:00:14.4: calling quirk_no_ata_d3+0x0/0x20 [ 0.157876] pci 0000:00:14.4: calling quirk_resource_alignment+0x0/0x1bb [ 0.157892] pci 0000:00:14.5: found [1002:4399] class 000c03 header type 00 [ 0.157904] pci 0000:00:14.5: calling quirk_no_ata_d3+0x0/0x20 [ 0.157915] pci 0000:00:14.5: reg 10 32bit mmio: [0xf98fd000-0xf98fdfff] [ 0.157954] pci 0000:00:14.5: calling quirk_resource_alignment+0x0/0x1bb [ 0.157977] pci 0000:00:15.0: found [1002:43a0] class 000604 header type 01 [ 0.157993] pci 0000:00:15.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.158022] pci 0000:00:15.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.158051] pci 0000:00:15.0: supports D1 D2 [ 0.158091] pci 0000:00:16.0: found [1002:4397] class 000c03 header type 00 [ 0.158097] pci 0000:00:16.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.158107] pci 0000:00:16.0: reg 10 32bit mmio: [0xf98fe000-0xf98fefff] [ 0.158146] pci 0000:00:16.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.158176] pci 0000:00:16.2: found [1002:4396] class 000c03 header type 00 [ 0.158195] pci 0000:00:16.2: calling quirk_no_ata_d3+0x0/0x20 [ 0.158206] pci 0000:00:16.2: reg 10 32bit mmio: [0xf98ffc00-0xf98ffcff] [ 0.158252] pci 0000:00:16.2: calling quirk_resource_alignment+0x0/0x1bb [ 0.158276] pci 0000:00:16.2: supports D1 D2 [ 0.158278] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.158284] pci 0000:00:16.2: PME# disabled [ 0.158310] pci 0000:00:18.0: found [1022:1200] class 000600 header type 00 [ 0.158344] pci 0000:00:18.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.158363] pci 0000:00:18.1: found [1022:1201] class 000600 header type 00 [ 0.158390] pci 0000:00:18.1: calling quirk_resource_alignment+0x0/0x1bb [ 0.158400] pci 0000:00:18.2: found [1022:1202] class 000600 header type 00 [ 0.158433] pci 0000:00:18.2: calling quirk_resource_alignment+0x0/0x1bb [ 0.158445] pci 0000:00:18.3: found [1022:1203] class 000600 header type 00 [ 0.158472] pci 0000:00:18.3: calling quirk_resource_alignment+0x0/0x1bb [ 0.158491] pci 0000:00:18.4: found [1022:1204] class 000600 header type 00 [ 0.158525] pci 0000:00:18.4: calling quirk_resource_alignment+0x0/0x1bb [ 0.158543] PCI: Fixups for bus 0000:00 [ 0.158546] pci 0000:00:02.0: scanning behind bridge, config 0b0b00, pass 0 [ 0.158551] PCI: Scanning bus 0000:0b [ 0.158568] pci 0000:0b:00.0: found [10de:06e4] class 000300 header type 00 [ 0.158587] pci 0000:0b:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.158605] pci 0000:0b:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.158617] pci 0000:0b:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.158624] pci 0000:0b:00.0: reg 24 io port: [0xe800-0xe87f] [ 0.158630] pci 0000:0b:00.0: reg 30 32bit mmio pref: [0xfe9e0000-0xfe9fffff] [ 0.158636] pci 0000:0b:00.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.158720] PCI: Fixups for bus 0000:0b [ 0.158725] pci 0000:00:02.0: bridge io port: [0xe000-0xefff] [ 0.158729] pci 0000:00:02.0: bridge 32bit mmio: [0xfa000000-0xfe9fffff] [ 0.158734] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.158736] PCI: Bus scan for 0000:0b returning with max=0b [ 0.158740] pci 0000:00:03.0: scanning behind bridge, config 0a0a00, pass 0 [ 0.158744] PCI: Scanning bus 0000:0a [ 0.158774] pci 0000:0a:00.0: found [9710:9990] class 000c03 header type 00 [ 0.158801] pci 0000:0a:00.0: reg 10 32bit mmio: [0xf9ff8000-0xf9ff8fff] [ 0.158850] pci 0000:0a:00.0: calling quirk_netmos+0x0/0xda [ 0.158859] pci 0000:0a:00.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.158899] pci 0000:0a:00.0: supports D1 D2 [ 0.158901] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot [ 0.158908] pci 0000:0a:00.0: PME# disabled [ 0.158976] pci 0000:0a:00.1: found [9710:9990] class 000c03 header type 00 [ 0.159003] pci 0000:0a:00.1: reg 10 32bit mmio: [0xf9ff9000-0xf9ff9fff] [ 0.159059] pci 0000:0a:00.1: calling quirk_netmos+0x0/0xda [ 0.159061] pci 0000:0a:00.1: calling quirk_resource_alignment+0x0/0x1bb [ 0.159102] pci 0000:0a:00.1: supports D1 D2 [ 0.159103] pci 0000:0a:00.1: PME# supported from D0 D1 D2 D3hot [ 0.159110] pci 0000:0a:00.1: PME# disabled [ 0.159155] pci 0000:0a:00.2: found [9710:9990] class 000c03 header type 00 [ 0.159182] pci 0000:0a:00.2: reg 10 32bit mmio: [0xf9ffa000-0xf9ffafff] [ 0.159238] pci 0000:0a:00.2: calling quirk_netmos+0x0/0xda [ 0.159240] pci 0000:0a:00.2: calling quirk_resource_alignment+0x0/0x1bb [ 0.159290] pci 0000:0a:00.2: supports D1 D2 [ 0.159292] pci 0000:0a:00.2: PME# supported from D0 D1 D2 D3hot [ 0.159298] pci 0000:0a:00.2: PME# disabled [ 0.159336] pci 0000:0a:00.3: found [9710:9990] class 000c03 header type 00 [ 0.159363] pci 0000:0a:00.3: reg 10 32bit mmio: [0xf9ffb000-0xf9ffbfff] [ 0.159419] pci 0000:0a:00.3: calling quirk_netmos+0x0/0xda [ 0.159421] pci 0000:0a:00.3: calling quirk_resource_alignment+0x0/0x1bb [ 0.159468] pci 0000:0a:00.3: supports D1 D2 [ 0.159470] pci 0000:0a:00.3: PME# supported from D0 D1 D2 D3hot [ 0.159476] pci 0000:0a:00.3: PME# disabled [ 0.159514] pci 0000:0a:00.4: found [9710:9990] class 000c03 header type 00 [ 0.159541] pci 0000:0a:00.4: reg 10 32bit mmio: [0xf9ffc000-0xf9ffcfff] [ 0.159597] pci 0000:0a:00.4: calling quirk_netmos+0x0/0xda [ 0.159599] pci 0000:0a:00.4: calling quirk_resource_alignment+0x0/0x1bb [ 0.159646] pci 0000:0a:00.4: supports D1 D2 [ 0.159648] pci 0000:0a:00.4: PME# supported from D0 D1 D2 D3hot [ 0.159654] pci 0000:0a:00.4: PME# disabled [ 0.159692] pci 0000:0a:00.5: found [9710:9990] class 000c03 header type 00 [ 0.159726] pci 0000:0a:00.5: reg 10 32bit mmio: [0xf9ffd000-0xf9ffdfff] [ 0.159775] pci 0000:0a:00.5: calling quirk_netmos+0x0/0xda [ 0.159777] pci 0000:0a:00.5: calling quirk_resource_alignment+0x0/0x1bb [ 0.159824] pci 0000:0a:00.5: supports D1 D2 [ 0.159826] pci 0000:0a:00.5: PME# supported from D0 D1 D2 D3hot [ 0.159832] pci 0000:0a:00.5: PME# disabled [ 0.160027] pci 0000:0a:00.6: found [9710:9990] class 000c03 header type 00 [ 0.160063] pci 0000:0a:00.6: reg 10 32bit mmio: [0xf9ffe000-0xf9ffefff] [ 0.160115] pci 0000:0a:00.6: calling quirk_netmos+0x0/0xda [ 0.160117] pci 0000:0a:00.6: calling quirk_resource_alignment+0x0/0x1bb [ 0.160167] pci 0000:0a:00.6: supports D1 D2 [ 0.160169] pci 0000:0a:00.6: PME# supported from D0 D1 D2 D3hot [ 0.160175] pci 0000:0a:00.6: PME# disabled [ 0.160223] pci 0000:0a:00.7: found [9710:9990] class 000c03 header type 00 [ 0.160251] pci 0000:0a:00.7: reg 10 32bit mmio: [0xf9fff000-0xf9ffffff] [ 0.160310] pci 0000:0a:00.7: calling quirk_netmos+0x0/0xda [ 0.160312] pci 0000:0a:00.7: calling quirk_resource_alignment+0x0/0x1bb [ 0.160355] pci 0000:0a:00.7: supports D1 D2 [ 0.160357] pci 0000:0a:00.7: PME# supported from D0 D1 D2 D3hot [ 0.160364] pci 0000:0a:00.7: PME# disabled [ 0.160433] PCI: Fixups for bus 0000:0a [ 0.160441] pci 0000:00:03.0: bridge 32bit mmio: [0xf9f00000-0xf9ffffff] [ 0.160447] PCI: Bus scan for 0000:0a returning with max=0a [ 0.160451] pci 0000:00:05.0: scanning behind bridge, config 090900, pass 0 [ 0.160456] PCI: Scanning bus 0000:09 [ 0.160511] pci 0000:09:00.0: found [10ec:8168] class 000200 header type 00 [ 0.160535] pci 0000:09:00.0: reg 10 io port: [0xd800-0xd8ff] [ 0.160556] pci 0000:09:00.0: reg 18 64bit mmio pref: [0xcffff000-0xcfffffff] [ 0.160571] pci 0000:09:00.0: reg 20 64bit mmio pref: [0xcfff8000-0xcfffbfff] [ 0.160579] pci 0000:09:00.0: reg 30 32bit mmio pref: [0xf9ee0000-0xf9efffff] [ 0.160585] pci 0000:09:00.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.160624] pci 0000:09:00.0: supports D1 D2 [ 0.160626] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.160633] pci 0000:09:00.0: PME# disabled [ 0.160707] PCI: Fixups for bus 0000:09 [ 0.160713] pci 0000:00:05.0: bridge io port: [0xd000-0xdfff] [ 0.160716] pci 0000:00:05.0: bridge 32bit mmio: [0xf9e00000-0xf9efffff] [ 0.160722] pci 0000:00:05.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff] [ 0.160724] PCI: Bus scan for 0000:09 returning with max=09 [ 0.160728] pci 0000:00:06.0: scanning behind bridge, config 080800, pass 0 [ 0.160740] PCI: Scanning bus 0000:08 [ 0.160760] pci 0000:08:00.0: found [10ec:8168] class 000200 header type 00 [ 0.160784] pci 0000:08:00.0: reg 10 io port: [0xc800-0xc8ff] [ 0.160805] pci 0000:08:00.0: reg 18 64bit mmio pref: [0xcfeff000-0xcfefffff] [ 0.160827] pci 0000:08:00.0: reg 20 64bit mmio pref: [0xcfef8000-0xcfefbfff] [ 0.160835] pci 0000:08:00.0: reg 30 32bit mmio pref: [0xf9de0000-0xf9dfffff] [ 0.160841] pci 0000:08:00.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.160880] pci 0000:08:00.0: supports D1 D2 [ 0.160882] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.160888] pci 0000:08:00.0: PME# disabled [ 0.160962] PCI: Fixups for bus 0000:08 [ 0.160968] pci 0000:00:06.0: bridge io port: [0xc000-0xcfff] [ 0.160972] pci 0000:00:06.0: bridge 32bit mmio: [0xf9d00000-0xf9dfffff] [ 0.160977] pci 0000:00:06.0: bridge 64bit mmio pref: [0xcfe00000-0xcfefffff] [ 0.160979] PCI: Bus scan for 0000:08 returning with max=08 [ 0.160983] pci 0000:00:0a.0: scanning behind bridge, config 070600, pass 0 [ 0.160988] PCI: Scanning bus 0000:06 [ 0.161021] pci 0000:06:00.0: found [104c:8231] class 000604 header type 01 [ 0.161090] pci 0000:06:00.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.161134] pci 0000:06:00.0: supports D1 D2 [ 0.161208] PCI: Fixups for bus 0000:06 [ 0.161215] pci 0000:00:0a.0: bridge 32bit mmio: [0xf9c00000-0xf9cfffff] [ 0.161223] pci 0000:06:00.0: scanning behind bridge, config 070706, pass 0 [ 0.161229] PCI: Scanning bus 0000:07 [ 0.161249] pci 0000:07:01.0: found [1033:0035] class 000c03 header type 00 [ 0.161287] pci 0000:07:01.0: reg 10 32bit mmio: [0xf9cfd000-0xf9cfdfff] [ 0.161351] pci 0000:07:01.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.161378] pci 0000:07:01.0: supports D1 D2 [ 0.161380] pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot [ 0.161387] pci 0000:07:01.0: PME# disabled [ 0.161414] pci 0000:07:01.1: found [1033:0035] class 000c03 header type 00 [ 0.161452] pci 0000:07:01.1: reg 10 32bit mmio: [0xf9cfe000-0xf9cfefff] [ 0.161509] pci 0000:07:01.1: calling quirk_resource_alignment+0x0/0x1bb [ 0.161542] pci 0000:07:01.1: supports D1 D2 [ 0.161544] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot [ 0.161551] pci 0000:07:01.1: PME# disabled [ 0.161579] pci 0000:07:01.2: found [1033:00e0] class 000c03 header type 00 [ 0.161617] pci 0000:07:01.2: reg 10 32bit mmio: [0xf9cffc00-0xf9cffcff] [ 0.161674] pci 0000:07:01.2: calling quirk_resource_alignment+0x0/0x1bb [ 0.161707] pci 0000:07:01.2: supports D1 D2 [ 0.161709] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot [ 0.161716] pci 0000:07:01.2: PME# disabled [ 0.161808] PCI: Fixups for bus 0000:07 [ 0.161821] pci 0000:06:00.0: bridge 32bit mmio: [0xf9c00000-0xf9cfffff] [ 0.161830] PCI: Bus scan for 0000:07 returning with max=07 [ 0.161836] pci 0000:06:00.0: scanning behind bridge, config 070706, pass 1 [ 0.161843] PCI: Bus scan for 0000:06 returning with max=07 [ 0.161847] pci 0000:00:0b.0: scanning behind bridge, config 050500, pass 0 [ 0.161852] PCI: Scanning bus 0000:05 [ 0.161903] pci 0000:05:00.0: found [1002:95c5] class 000300 header type 00 [ 0.161913] pci 0000:05:00.0: calling quirk_no_ata_d3+0x0/0x20 [ 0.161930] pci 0000:05:00.0: reg 10 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.161943] pci 0000:05:00.0: reg 18 64bit mmio: [0xf9be0000-0xf9beffff] [ 0.161951] pci 0000:05:00.0: reg 20 io port: [0xb000-0xb0ff] [ 0.161965] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xf9bc0000-0xf9bdffff] [ 0.161970] pci 0000:05:00.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.161998] pci 0000:05:00.0: supports D1 D2 [ 0.162026] pci 0000:05:00.1: found [1002:aa28] class 000403 header type 00 [ 0.162044] pci 0000:05:00.1: calling quirk_no_ata_d3+0x0/0x20 [ 0.162060] pci 0000:05:00.1: reg 10 64bit mmio: [0xf9bfc000-0xf9bfffff] [ 0.162095] pci 0000:05:00.1: calling quirk_resource_alignment+0x0/0x1bb [ 0.162129] pci 0000:05:00.1: supports D1 D2 [ 0.162194] PCI: Fixups for bus 0000:05 [ 0.162200] pci 0000:00:0b.0: bridge io port: [0xb000-0xbfff] [ 0.162211] pci 0000:00:0b.0: bridge 32bit mmio: [0xf9b00000-0xf9bfffff] [ 0.162216] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.162218] PCI: Bus scan for 0000:05 returning with max=05 [ 0.162222] pci 0000:00:0d.0: scanning behind bridge, config 040400, pass 0 [ 0.162227] PCI: Scanning bus 0000:04 [ 0.162250] pci 0000:04:00.0: found [9710:9990] class 000c03 header type 00 [ 0.162278] pci 0000:04:00.0: reg 10 32bit mmio: [0xf9af8000-0xf9af8fff] [ 0.162335] pci 0000:04:00.0: calling quirk_netmos+0x0/0xda [ 0.162338] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.162386] pci 0000:04:00.0: supports D1 D2 [ 0.162388] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot [ 0.162394] pci 0000:04:00.0: PME# disabled [ 0.162435] pci 0000:04:00.1: found [9710:9990] class 000c03 header type 00 [ 0.162469] pci 0000:04:00.1: reg 10 32bit mmio: [0xf9af9000-0xf9af9fff] [ 0.162520] pci 0000:04:00.1: calling quirk_netmos+0x0/0xda [ 0.162522] pci 0000:04:00.1: calling quirk_resource_alignment+0x0/0x1bb [ 0.162570] pci 0000:04:00.1: supports D1 D2 [ 0.162572] pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot [ 0.162579] pci 0000:04:00.1: PME# disabled [ 0.162618] pci 0000:04:00.2: found [9710:9990] class 000c03 header type 00 [ 0.162653] pci 0000:04:00.2: reg 10 32bit mmio: [0xf9afa000-0xf9afafff] [ 0.162703] pci 0000:04:00.2: calling quirk_netmos+0x0/0xda [ 0.162706] pci 0000:04:00.2: calling quirk_resource_alignment+0x0/0x1bb [ 0.162754] pci 0000:04:00.2: supports D1 D2 [ 0.162756] pci 0000:04:00.2: PME# supported from D0 D1 D2 D3hot [ 0.162762] pci 0000:04:00.2: PME# disabled [ 0.162802] pci 0000:04:00.3: found [9710:9990] class 000c03 header type 00 [ 0.162836] pci 0000:04:00.3: reg 10 32bit mmio: [0xf9afb000-0xf9afbfff] [ 0.162887] pci 0000:04:00.3: calling quirk_netmos+0x0/0xda [ 0.162889] pci 0000:04:00.3: calling quirk_resource_alignment+0x0/0x1bb [ 0.162937] pci 0000:04:00.3: supports D1 D2 [ 0.162939] pci 0000:04:00.3: PME# supported from D0 D1 D2 D3hot [ 0.162946] pci 0000:04:00.3: PME# disabled [ 0.162992] pci 0000:04:00.4: found [9710:9990] class 000c03 header type 00 [ 0.163020] pci 0000:04:00.4: reg 10 32bit mmio: [0xf9afc000-0xf9afcfff] [ 0.163070] pci 0000:04:00.4: calling quirk_netmos+0x0/0xda [ 0.163079] pci 0000:04:00.4: calling quirk_resource_alignment+0x0/0x1bb [ 0.163121] pci 0000:04:00.4: supports D1 D2 [ 0.163123] pci 0000:04:00.4: PME# supported from D0 D1 D2 D3hot [ 0.163129] pci 0000:04:00.4: PME# disabled [ 0.163176] pci 0000:04:00.5: found [9710:9990] class 000c03 header type 00 [ 0.163203] pci 0000:04:00.5: reg 10 32bit mmio: [0xf9afd000-0xf9afdfff] [ 0.163283] pci 0000:04:00.5: calling quirk_netmos+0x0/0xda [ 0.163285] pci 0000:04:00.5: calling quirk_resource_alignment+0x0/0x1bb [ 0.163327] pci 0000:04:00.5: supports D1 D2 [ 0.163328] pci 0000:04:00.5: PME# supported from D0 D1 D2 D3hot [ 0.163342] pci 0000:04:00.5: PME# disabled [ 0.163383] pci 0000:04:00.6: found [9710:9990] class 000c03 header type 00 [ 0.163411] pci 0000:04:00.6: reg 10 32bit mmio: [0xf9afe000-0xf9afefff] [ 0.163468] pci 0000:04:00.6: calling quirk_netmos+0x0/0xda [ 0.163471] pci 0000:04:00.6: calling quirk_resource_alignment+0x0/0x1bb [ 0.163519] pci 0000:04:00.6: supports D1 D2 [ 0.163521] pci 0000:04:00.6: PME# supported from D0 D1 D2 D3hot [ 0.163527] pci 0000:04:00.6: PME# disabled [ 0.163567] pci 0000:04:00.7: found [9710:9990] class 000c03 header type 00 [ 0.163602] pci 0000:04:00.7: reg 10 32bit mmio: [0xf9aff000-0xf9afffff] [ 0.163652] pci 0000:04:00.7: calling quirk_netmos+0x0/0xda [ 0.163654] pci 0000:04:00.7: calling quirk_resource_alignment+0x0/0x1bb [ 0.163703] pci 0000:04:00.7: supports D1 D2 [ 0.163705] pci 0000:04:00.7: PME# supported from D0 D1 D2 D3hot [ 0.163711] pci 0000:04:00.7: PME# disabled [ 0.163780] PCI: Fixups for bus 0000:04 [ 0.163787] pci 0000:00:0d.0: bridge 32bit mmio: [0xf9a00000-0xf9afffff] [ 0.163793] PCI: Bus scan for 0000:04 returning with max=04 [ 0.163798] pci 0000:00:14.4: scanning behind bridge, config 030300, pass 0 [ 0.163803] PCI: Scanning bus 0000:03 [ 0.163830] pci 0000:03:06.0: found [13f6:0111] class 000401 header type 00 [ 0.163865] pci 0000:03:06.0: reg 10 io port: [0xa800-0xa8ff] [ 0.163916] pci 0000:03:06.0: calling quirk_resource_alignment+0x0/0x1bb [ 0.163947] pci 0000:03:06.0: supports D1 D2 [ 0.164001] PCI: Fixups for bus 0000:03 [ 0.164001] pci 0000:00:14.4: transparent bridge [ 0.164001] pci 0000:00:14.4: bridge io port: [0xa000-0xafff] [ 0.164001] PCI: Bus scan for 0000:03 returning with max=03 [ 0.164001] pci 0000:00:15.0: scanning behind bridge, config 020200, pass 0 [ 0.164001] PCI: Scanning bus 0000:02 [ 0.164001] PCI: Fixups for bus 0000:02 [ 0.164001] PCI: Bus scan for 0000:02 returning with max=02 [ 0.164001] pci 0000:00:02.0: scanning behind bridge, config 0b0b00, pass 1 [ 0.164001] pci 0000:00:03.0: scanning behind bridge, config 0a0a00, pass 1 [ 0.164001] pci 0000:00:05.0: scanning behind bridge, config 090900, pass 1 [ 0.164001] pci 0000:00:06.0: scanning behind bridge, config 080800, pass 1 [ 0.164001] pci 0000:00:0a.0: scanning behind bridge, config 070600, pass 1 [ 0.164001] pci 0000:00:0b.0: scanning behind bridge, config 050500, pass 1 [ 0.164001] pci 0000:00:0d.0: scanning behind bridge, config 040400, pass 1 [ 0.164001] pci 0000:00:14.4: scanning behind bridge, config 030300, pass 1 [ 0.164001] pci 0000:00:15.0: scanning behind bridge, config 020200, pass 1 [ 0.164001] PCI: Bus scan for 0000:00 returning with max=0b [ 0.164001] pci_bus 0000:00: on NUMA node 0 [ 0.164001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.164001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT] [ 0.164035] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC03._PRT] [ 0.164119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT] [ 0.164192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT] [ 0.164274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0A._PRT] [ 0.164375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0B._PRT] [ 0.164447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC0D._PRT] [ 0.164535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.164650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] [ 0.188121] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15) [ 0.188323] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15) [ 0.188539] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15) [ 0.188723] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 14 15) [ 0.188884] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15) [ 0.189001] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15) [ 0.189120] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15) [ 0.189246] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 14 15) [ 0.189299] xen_balloon: Initialising balloon driver with page order 0. [ 0.189299] last_pfn = 0x2b0000 max_arch_pfn = 0x400000000 [ 0.213838] vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.213838] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=none,locks=none [ 0.213838] vgaarb: loaded [ 0.213838] SCSI subsystem initialized [ 0.213838] libata version 3.00 loaded. [ 0.213838] usbcore: registered new interface driver usbfs [ 0.213838] usbcore: registered new interface driver hub [ 0.213838] usbcore: registered new device driver usb [ 0.216061] PCI: Using ACPI for IRQ routing [ 0.216298] NetLabel: Initializing [ 0.216298] NetLabel: domain hash size = 128 [ 0.216298] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.216298] NetLabel: unlabeled traffic allowed by default [ 0.216340] Switching to clocksource xen [ 0.217314] Switched to NOHz mode on CPU #1 [ 0.217576] Switched to NOHz mode on CPU #2 [ 0.218277] Switched to NOHz mode on CPU #3 [ 0.218412] Switched to NOHz mode on CPU #0 [ 0.218446] Switched to NOHz mode on CPU #4 [ 0.218948] Switched to NOHz mode on CPU #5 [ 0.224250] pnp: PnP ACPI init [ 0.224278] ACPI: bus type pnp registered [ 0.225934] xen: registering gsi 8 triggering 1 polarity 0 [ 0.225937] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.225940] xen: --> irq=8 [ 0.226475] xen: registering gsi 13 triggering 1 polarity 0 [ 0.226477] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.226480] xen: --> irq=13 [ 0.227215] xen: registering gsi 4 triggering 1 polarity 0 [ 0.227217] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.227220] xen: --> irq=4 [ 0.227222] Already setup the GSI :4 [ 0.230571] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 0.230579] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.230586] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node ffff8800278b0240), AE_NOT_EXIST [ 0.230611] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D0._STA] (Node ffff8800278b0240), AE_NOT_EXIST [ 0.230629] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 0.230635] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.230641] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node ffff8800278b0320), AE_NOT_EXIST [ 0.230665] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D1._STA] (Node ffff8800278b0320), AE_NOT_EXIST [ 0.230685] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 0.230691] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.230697] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node ffff8800278b0500), AE_NOT_EXIST [ 0.230722] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D0._STA] (Node ffff8800278b0500), AE_NOT_EXIST [ 0.230738] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 0.230744] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 0.230750] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node ffff8800278b05e0), AE_NOT_EXIST [ 0.230774] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D1._STA] (Node ffff8800278b05e0), AE_NOT_EXIST [ 0.230783] pnp: PnP ACPI: found 14 devices [ 0.230785] ACPI: ACPI bus type pnp unregistered [ 0.230798] system 00:01: iomem range 0xfec20000-0xfec200ff could not be reserved [ 0.230805] system 00:02: iomem range 0xf6000000-0xf6003fff has been reserved [ 0.230812] system 00:08: ioport range 0x600-0x6df has been reserved [ 0.230816] system 00:08: ioport range 0xae0-0xaef has been reserved [ 0.230822] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.230826] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.230832] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 0.230836] system 00:0b: ioport range 0x40b-0x40b has been reserved [ 0.230839] system 00:0b: ioport range 0x4d6-0x4d6 has been reserved [ 0.230842] system 00:0b: ioport range 0xc00-0xc01 has been reserved [ 0.230846] system 00:0b: ioport range 0xc14-0xc14 has been reserved [ 0.230849] system 00:0b: ioport range 0xc50-0xc51 has been reserved [ 0.230853] system 00:0b: ioport range 0xc52-0xc52 has been reserved [ 0.230856] system 00:0b: ioport range 0xc6c-0xc6c has been reserved [ 0.230860] system 00:0b: ioport range 0xc6f-0xc6f has been reserved [ 0.230863] system 00:0b: ioport range 0xcd0-0xcd1 has been reserved [ 0.230867] system 00:0b: ioport range 0xcd2-0xcd3 has been reserved [ 0.230870] system 00:0b: ioport range 0xcd4-0xcd5 has been reserved [ 0.230874] system 00:0b: ioport range 0xcd6-0xcd7 has been reserved [ 0.230877] system 00:0b: ioport range 0xcd8-0xcdf has been reserved [ 0.230883] system 00:0b: ioport range 0x800-0x89f has been reserved [ 0.230887] system 00:0b: ioport range 0xb00-0xb1f has been reserved [ 0.230891] system 00:0b: ioport range 0xb20-0xb3f has been reserved [ 0.230894] system 00:0b: ioport range 0x900-0x90f has been reserved [ 0.230897] system 00:0b: ioport range 0x910-0x91f has been reserved [ 0.230901] system 00:0b: ioport range 0xfe00-0xfefe has been reserved [ 0.230905] system 00:0b: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.230909] system 00:0b: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.230912] system 00:0b: iomem range 0xfed80000-0xfed80fff has been reserved [ 0.230918] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.230924] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.230928] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 0.230932] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.230935] system 00:0d: iomem range 0x100000-0xafffffff could not be reserved [ 0.230939] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.231154] pciback: wants to seize 0000:03:06.0 [ 0.231156] pciback: wants to seize 0000:04:00.0 [ 0.231159] pciback: wants to seize 0000:04:00.1 [ 0.231162] pciback: wants to seize 0000:04:00.2 [ 0.231164] pciback: wants to seize 0000:04:00.3 [ 0.231166] pciback: wants to seize 0000:04:00.4 [ 0.231169] pciback: wants to seize 0000:04:00.5 [ 0.231173] pciback: wants to seize 0000:04:00.6 [ 0.231175] pciback: wants to seize 0000:04:00.7 [ 0.231178] pciback: wants to seize 0000:0a:00.0 [ 0.231180] pciback: wants to seize 0000:0a:00.1 [ 0.231182] pciback: wants to seize 0000:0a:00.2 [ 0.231184] pciback: wants to seize 0000:0a:00.3 [ 0.231187] pciback: wants to seize 0000:0a:00.4 [ 0.231189] pciback: wants to seize 0000:0a:00.5 [ 0.231191] pciback: wants to seize 0000:0a:00.6 [ 0.231193] pciback: wants to seize 0000:0a:00.7 [ 0.231196] pciback: wants to seize 0000:05:00.0 [ 0.231198] pciback: wants to seize 0000:05:00.1 [ 0.231200] pciback: wants to seize 0000:07:01.0 [ 0.231202] pciback: wants to seize 0000:07:01.1 [ 0.231205] pciback: wants to seize 0000:07:01.2 [ 0.231213] pciback 0000:00:00.0: probing... [ 0.231222] pciback 0000:00:00.2: probing... [ 0.231228] pciback 0000:00:02.0: probing... [ 0.231235] pciback 0000:00:03.0: probing... [ 0.231241] pciback 0000:00:05.0: probing... [ 0.231249] pciback 0000:00:06.0: probing... [ 0.231256] pciback 0000:00:0a.0: probing... [ 0.231262] pciback 0000:00:0b.0: probing... [ 0.231269] pciback 0000:00:0d.0: probing... [ 0.231275] pciback 0000:00:11.0: probing... [ 0.231281] pciback 0000:00:12.0: probing... [ 0.231288] pciback 0000:00:12.2: probing... [ 0.231293] pciback 0000:00:13.0: probing... [ 0.231303] pciback 0000:00:13.2: probing... [ 0.231309] pciback 0000:00:14.0: probing... [ 0.231315] pciback 0000:00:14.1: probing... [ 0.231321] pciback 0000:00:14.3: probing... [ 0.231327] pciback 0000:00:14.4: probing... [ 0.231334] pciback 0000:00:14.5: probing... [ 0.231340] pciback 0000:00:15.0: probing... [ 0.231346] pciback 0000:00:16.0: probing... [ 0.231352] pciback 0000:00:16.2: probing... [ 0.231358] pciback 0000:00:18.0: probing... [ 0.231364] pciback 0000:00:18.1: probing... [ 0.231370] pciback 0000:00:18.2: probing... [ 0.231376] pciback 0000:00:18.3: probing... [ 0.231382] pciback 0000:00:18.4: probing... [ 0.231388] pciback 0000:0b:00.0: probing... [ 0.231394] pciback 0000:0a:00.0: probing... [ 0.231396] pciback 0000:0a:00.0: seizing device [ 0.231399] pciback 0000:0a:00.0: pcistub_device_alloc [ 0.231402] pciback 0000:0a:00.0: deferring initialization [ 0.231407] pciback 0000:0a:00.1: probing... [ 0.231409] pciback 0000:0a:00.1: seizing device [ 0.231412] pciback 0000:0a:00.1: pcistub_device_alloc [ 0.231414] pciback 0000:0a:00.1: deferring initialization [ 0.231419] pciback 0000:0a:00.2: probing... [ 0.231421] pciback 0000:0a:00.2: seizing device [ 0.231424] pciback 0000:0a:00.2: pcistub_device_alloc [ 0.231426] pciback 0000:0a:00.2: deferring initialization [ 0.231431] pciback 0000:0a:00.3: probing... [ 0.231433] pciback 0000:0a:00.3: seizing device [ 0.231435] pciback 0000:0a:00.3: pcistub_device_alloc [ 0.231437] pciback 0000:0a:00.3: deferring initialization [ 0.231443] pciback 0000:0a:00.4: probing... [ 0.231445] pciback 0000:0a:00.4: seizing device [ 0.231447] pciback 0000:0a:00.4: pcistub_device_alloc [ 0.231449] pciback 0000:0a:00.4: deferring initialization [ 0.231454] pciback 0000:0a:00.5: probing... [ 0.231456] pciback 0000:0a:00.5: seizing device [ 0.231459] pciback 0000:0a:00.5: pcistub_device_alloc [ 0.231461] pciback 0000:0a:00.5: deferring initialization [ 0.231474] pciback 0000:0a:00.6: probing... [ 0.231476] pciback 0000:0a:00.6: seizing device [ 0.231478] pciback 0000:0a:00.6: pcistub_device_alloc [ 0.231480] pciback 0000:0a:00.6: deferring initialization [ 0.231484] pciback 0000:0a:00.7: probing... [ 0.231486] pciback 0000:0a:00.7: seizing device [ 0.231489] pciback 0000:0a:00.7: pcistub_device_alloc [ 0.231490] pciback 0000:0a:00.7: deferring initialization [ 0.231495] pciback 0000:09:00.0: probing... [ 0.231501] pciback 0000:08:00.0: probing... [ 0.231507] pciback 0000:06:00.0: probing... [ 0.231513] pciback 0000:07:01.0: probing... [ 0.231516] pciback 0000:07:01.0: seizing device [ 0.231518] pciback 0000:07:01.0: pcistub_device_alloc [ 0.231520] pciback 0000:07:01.0: deferring initialization [ 0.231524] pciback 0000:07:01.1: probing... [ 0.231526] pciback 0000:07:01.1: seizing device [ 0.231528] pciback 0000:07:01.1: pcistub_device_alloc [ 0.231530] pciback 0000:07:01.1: deferring initialization [ 0.231535] pciback 0000:07:01.2: probing... [ 0.231537] pciback 0000:07:01.2: seizing device [ 0.231539] pciback 0000:07:01.2: pcistub_device_alloc [ 0.231541] pciback 0000:07:01.2: deferring initialization [ 0.231545] pciback 0000:05:00.0: probing... [ 0.231547] pciback 0000:05:00.0: seizing device [ 0.231550] pciback 0000:05:00.0: pcistub_device_alloc [ 0.231551] pciback 0000:05:00.0: deferring initialization [ 0.231556] pciback 0000:05:00.1: probing... [ 0.231558] pciback 0000:05:00.1: seizing device [ 0.231560] pciback 0000:05:00.1: pcistub_device_alloc [ 0.231562] pciback 0000:05:00.1: deferring initialization [ 0.231566] pciback 0000:04:00.0: probing... [ 0.231568] pciback 0000:04:00.0: seizing device [ 0.231570] pciback 0000:04:00.0: pcistub_device_alloc [ 0.231572] pciback 0000:04:00.0: deferring initialization [ 0.231578] pciback 0000:04:00.1: probing... [ 0.231580] pciback 0000:04:00.1: seizing device [ 0.231583] pciback 0000:04:00.1: pcistub_device_alloc [ 0.231584] pciback 0000:04:00.1: deferring initialization [ 0.231589] pciback 0000:04:00.2: probing... [ 0.231590] pciback 0000:04:00.2: seizing device [ 0.231593] pciback 0000:04:00.2: pcistub_device_alloc [ 0.231594] pciback 0000:04:00.2: deferring initialization [ 0.231599] pciback 0000:04:00.3: probing... [ 0.231601] pciback 0000:04:00.3: seizing device [ 0.231604] pciback 0000:04:00.3: pcistub_device_alloc [ 0.231605] pciback 0000:04:00.3: deferring initialization [ 0.231610] pciback 0000:04:00.4: probing... [ 0.231611] pciback 0000:04:00.4: seizing device [ 0.231614] pciback 0000:04:00.4: pcistub_device_alloc [ 0.231616] pciback 0000:04:00.4: deferring initialization [ 0.231620] pciback 0000:04:00.5: probing... [ 0.231622] pciback 0000:04:00.5: seizing device [ 0.231624] pciback 0000:04:00.5: pcistub_device_alloc [ 0.231626] pciback 0000:04:00.5: deferring initialization [ 0.231631] pciback 0000:04:00.6: probing... [ 0.231633] pciback 0000:04:00.6: seizing device [ 0.231635] pciback 0000:04:00.6: pcistub_device_alloc [ 0.231637] pciback 0000:04:00.6: deferring initialization [ 0.231641] pciback 0000:04:00.7: probing... [ 0.231643] pciback 0000:04:00.7: seizing device [ 0.231645] pciback 0000:04:00.7: pcistub_device_alloc [ 0.231647] pciback 0000:04:00.7: deferring initialization [ 0.231652] pciback 0000:03:06.0: probing... [ 0.231653] pciback 0000:03:06.0: seizing device [ 0.231656] pciback 0000:03:06.0: pcistub_device_alloc [ 0.231658] pciback 0000:03:06.0: deferring initialization [ 0.234930] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.235037] pci 0000:00:02.0: PCI bridge, secondary bus 0000:0b [ 0.235041] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 0.235047] pci 0000:00:02.0: MEM window: 0xfa000000-0xfe9fffff [ 0.235052] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.235060] pci 0000:00:03.0: PCI bridge, secondary bus 0000:0a [ 0.235062] pci 0000:00:03.0: IO window: disabled [ 0.235068] pci 0000:00:03.0: MEM window: 0xf9f00000-0xf9ffffff [ 0.235072] pci 0000:00:03.0: PREFETCH window: disabled [ 0.235079] pci 0000:00:05.0: PCI bridge, secondary bus 0000:09 [ 0.235083] pci 0000:00:05.0: IO window: 0xd000-0xdfff [ 0.235088] pci 0000:00:05.0: MEM window: 0xf9e00000-0xf9efffff [ 0.235093] pci 0000:00:05.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff [ 0.235100] pci 0000:00:06.0: PCI bridge, secondary bus 0000:08 [ 0.235104] pci 0000:00:06.0: IO window: 0xc000-0xcfff [ 0.235112] pci 0000:00:06.0: MEM window: 0xf9d00000-0xf9dfffff [ 0.235116] pci 0000:00:06.0: PREFETCH window: 0x000000cfe00000-0x000000cfefffff [ 0.235124] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 [ 0.235126] pci 0000:06:00.0: IO window: disabled [ 0.235134] pci 0000:06:00.0: MEM window: 0xf9c00000-0xf9cfffff [ 0.235140] pci 0000:06:00.0: PREFETCH window: disabled [ 0.235150] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:06 [ 0.235153] pci 0000:00:0a.0: IO window: disabled [ 0.235158] pci 0000:00:0a.0: MEM window: 0xf9c00000-0xf9cfffff [ 0.235163] pci 0000:00:0a.0: PREFETCH window: disabled [ 0.235169] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:05 [ 0.235173] pci 0000:00:0b.0: IO window: 0xb000-0xbfff [ 0.235179] pci 0000:00:0b.0: MEM window: 0xf9b00000-0xf9bfffff [ 0.235184] pci 0000:00:0b.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff [ 0.235191] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04 [ 0.235194] pci 0000:00:0d.0: IO window: disabled [ 0.235201] pci 0000:00:0d.0: MEM window: 0xf9a00000-0xf9afffff [ 0.235205] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.235212] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.235216] pci 0000:00:14.4: IO window: 0xa000-0xafff [ 0.235223] pci 0000:00:14.4: MEM window: disabled [ 0.235228] pci 0000:00:14.4: PREFETCH window: disabled [ 0.235236] pci 0000:00:15.0: PCI bridge, secondary bus 0000:02 [ 0.235239] pci 0000:00:15.0: IO window: disabled [ 0.235245] pci 0000:00:15.0: MEM window: disabled [ 0.235250] pci 0000:00:15.0: PREFETCH window: disabled [ 0.235265] xen: registering gsi 52 triggering 0 polarity 1 [ 0.235274] alloc irq_desc for 52 on node 0 [ 0.235276] alloc kstat_irqs on node 0 [ 0.235280] xen: --> irq=52 [ 0.235300] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 0.235307] pci 0000:00:02.0: setting latency timer to 64 [ 0.235316] xen: registering gsi 52 triggering 0 polarity 1 [ 0.235318] xen_allocate_pirq: returning irq 52 for gsi 52 [ 0.235320] xen: --> irq=52 [ 0.235322] Already setup the GSI :52 [ 0.235325] pci 0000:00:03.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 0.235330] pci 0000:00:03.0: setting latency timer to 64 [ 0.235338] xen: registering gsi 52 triggering 0 polarity 1 [ 0.235339] xen_allocate_pirq: returning irq 52 for gsi 52 [ 0.235342] xen: --> irq=52 [ 0.235343] Already setup the GSI :52 [ 0.235346] pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 0.235351] pci 0000:00:05.0: setting latency timer to 64 [ 0.235358] xen: registering gsi 53 triggering 0 polarity 1 [ 0.235362] alloc irq_desc for 53 on node 0 [ 0.235364] alloc kstat_irqs on node 0 [ 0.235366] xen: --> irq=53 [ 0.235384] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 0.235391] pci 0000:00:06.0: setting latency timer to 64 [ 0.235401] xen: registering gsi 54 triggering 0 polarity 1 [ 0.235405] alloc irq_desc for 54 on node 0 [ 0.235406] alloc kstat_irqs on node 0 [ 0.235409] xen: --> irq=54 [ 0.235421] pci 0000:00:0a.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 0.235428] pci 0000:00:0a.0: setting latency timer to 64 [ 0.235442] pci 0000:06:00.0: setting latency timer to 64 [ 0.235451] xen: registering gsi 54 triggering 0 polarity 1 [ 0.235453] xen_allocate_pirq: returning irq 54 for gsi 54 [ 0.235455] xen: --> irq=54 [ 0.235457] Already setup the GSI :54 [ 0.235460] pci 0000:00:0b.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 0.235465] pci 0000:00:0b.0: setting latency timer to 64 [ 0.235472] xen: registering gsi 54 triggering 0 polarity 1 [ 0.235474] xen_allocate_pirq: returning irq 54 for gsi 54 [ 0.235476] xen: --> irq=54 [ 0.235478] Already setup the GSI :54 [ 0.235481] pci 0000:00:0d.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 0.235485] pci 0000:00:0d.0: setting latency timer to 64 [ 0.235502] xen: registering gsi 16 triggering 0 polarity 1 [ 0.235506] alloc irq_desc for 16 on node 0 [ 0.235508] alloc kstat_irqs on node 0 [ 0.235510] xen: --> irq=16 [ 0.235524] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.235531] pci 0000:00:15.0: setting latency timer to 64 [ 0.235535] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.235537] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.235539] pci_bus 0000:0b: resource 0 io: [0xe000-0xefff] [ 0.235541] pci_bus 0000:0b: resource 1 mem: [0xfa000000-0xfe9fffff] [ 0.235544] pci_bus 0000:0b: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.235546] pci_bus 0000:0a: resource 1 mem: [0xf9f00000-0xf9ffffff] [ 0.235548] pci_bus 0000:09: resource 0 io: [0xd000-0xdfff] [ 0.235550] pci_bus 0000:09: resource 1 mem: [0xf9e00000-0xf9efffff] [ 0.235552] pci_bus 0000:09: resource 2 pref mem [0xcff00000-0xcfffffff] [ 0.235555] pci_bus 0000:08: resource 0 io: [0xc000-0xcfff] [ 0.235556] pci_bus 0000:08: resource 1 mem: [0xf9d00000-0xf9dfffff] [ 0.235558] pci_bus 0000:08: resource 2 pref mem [0xcfe00000-0xcfefffff] [ 0.235561] pci_bus 0000:06: resource 1 mem: [0xf9c00000-0xf9cfffff] [ 0.235563] pci_bus 0000:07: resource 1 mem: [0xf9c00000-0xf9cfffff] [ 0.235565] pci_bus 0000:05: resource 0 io: [0xb000-0xbfff] [ 0.235567] pci_bus 0000:05: resource 1 mem: [0xf9b00000-0xf9bfffff] [ 0.235569] pci_bus 0000:05: resource 2 pref mem [0xb0000000-0xbfffffff] [ 0.235571] pci_bus 0000:04: resource 1 mem: [0xf9a00000-0xf9afffff] [ 0.235573] pci_bus 0000:03: resource 0 io: [0xa000-0xafff] [ 0.235575] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.235577] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.235594] NET: Registered protocol family 2 [ 0.235632] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.236216] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.237265] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.237513] TCP: Hash tables configured (established 262144 bind 65536) [ 0.237518] TCP reno registered [ 0.237589] NET: Registered protocol family 1 [ 0.237987] RPC: Registered udp transport module. [ 0.237990] RPC: Registered tcp transport module. [ 0.237993] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.238005] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238010] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x588 [ 0.238014] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xc2 [ 0.238018] pci 0000:00:00.2: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238021] pci 0000:00:00.2: calling quirk_usb_early_handoff+0x0/0x588 [ 0.238024] pci 0000:00:00.2: calling pci_fixup_video+0x0/0xc2 [ 0.238028] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238031] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x588 [ 0.238034] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xc2 [ 0.238037] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238040] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x588 [ 0.238043] pci 0000:00:03.0: calling pci_fixup_video+0x0/0xc2 [ 0.238047] pci 0000:00:05.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238050] pci 0000:00:05.0: calling quirk_usb_early_handoff+0x0/0x588 [ 0.238053] pci 0000:00:05.0: calling pci_fixup_video+0x0/0xc2 [ 0.238056] pci 0000:00:06.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238059] pci 0000:00:06.0: calling quirk_usb_early_handoff+0x0/0x588 [ 0.238062] pci 0000:00:06.0: calling pci_fixup_video+0x0/0xc2 [ 0.238066] pci 0000:00:0a.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238069] pci 0000:00:0a.0: calling quirk_usb_early_handoff+0x0/0x588 [ 0.238072] pci 0000:00:0a.0: calling pci_fixup_video+0x0/0xc2 [ 0.238076] pci 0000:00:0b.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238079] pci 0000:00:0b.0: calling quirk_usb_early_handoff+0x0/0x588 [ 0.238081] pci 0000:00:0b.0: calling pci_fixup_video+0x0/0xc2 [ 0.238085] pci 0000:00:0d.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238088] pci 0000:00:0d.0: calling quirk_usb_early_handoff+0x0/0x588 [ 0.238091] pci 0000:00:0d.0: calling pci_fixup_video+0x0/0xc2 [ 0.238097] pci 0000:00:11.0: calling quirk_msi_intx_disable_ati_bug+0x0/0x47 [ 0.238103] pci 0000:00:11.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238106] pci 0000:00:11.0: calling quirk_usb_early_handoff+0x0/0x588 [ 0.238109] pci 0000:00:11.0: calling pci_fixup_video+0x0/0xc2 [ 0.238112] pci 0000:00:12.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.238115] pci 0000:00:12.0: calling quirk_usb_early_handoff+0x0/0x588 [ 0.988256] pci 0000:00:12.0: calling pci_fixup_video+0x0/0xc2 [ 0.988263] pci 0000:00:12.2: calling quirk_cardbus_legacy+0x0/0x30 [ 0.988267] pci 0000:00:12.2: calling quirk_usb_early_handoff+0x0/0x588 [ 0.988305] pci 0000:00:12.2: calling pci_fixup_video+0x0/0xc2 [ 0.988309] pci 0000:00:13.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.988312] pci 0000:00:13.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.004317] pci 0000:00:13.0: calling pci_fixup_video+0x0/0xc2 [ 1.004324] pci 0000:00:13.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.004327] pci 0000:00:13.2: calling quirk_usb_early_handoff+0x0/0x588 [ 1.004355] pci 0000:00:13.2: calling pci_fixup_video+0x0/0xc2 [ 1.004360] pci 0000:00:14.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.004363] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.004365] pci 0000:00:14.0: calling pci_fixup_video+0x0/0xc2 [ 1.004369] pci 0000:00:14.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.004372] pci 0000:00:14.1: calling quirk_usb_early_handoff+0x0/0x588 [ 1.004375] pci 0000:00:14.1: calling pci_fixup_video+0x0/0xc2 [ 1.004378] pci 0000:00:14.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.004381] pci 0000:00:14.3: calling quirk_usb_early_handoff+0x0/0x588 [ 1.004384] pci 0000:00:14.3: calling pci_fixup_video+0x0/0xc2 [ 1.004387] pci 0000:00:14.4: calling quirk_cardbus_legacy+0x0/0x30 [ 1.004390] pci 0000:00:14.4: calling quirk_usb_early_handoff+0x0/0x588 [ 1.004393] pci 0000:00:14.4: calling pci_fixup_video+0x0/0xc2 [ 1.004396] pci 0000:00:14.5: calling quirk_cardbus_legacy+0x0/0x30 [ 1.004399] pci 0000:00:14.5: calling quirk_usb_early_handoff+0x0/0x588 [ 1.020314] pci 0000:00:14.5: calling pci_fixup_video+0x0/0xc2 [ 1.020321] pci 0000:00:15.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.020324] pci 0000:00:15.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.020327] pci 0000:00:15.0: calling pci_fixup_video+0x0/0xc2 [ 1.020330] pci 0000:00:16.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.020333] pci 0000:00:16.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036288] pci 0000:00:16.0: calling pci_fixup_video+0x0/0xc2 [ 1.036302] pci 0000:00:16.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036305] pci 0000:00:16.2: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036332] pci 0000:00:16.2: calling pci_fixup_video+0x0/0xc2 [ 1.036336] pci 0000:00:18.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036339] pci 0000:00:18.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036342] pci 0000:00:18.0: calling pci_fixup_video+0x0/0xc2 [ 1.036346] pci 0000:00:18.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036349] pci 0000:00:18.1: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036351] pci 0000:00:18.1: calling pci_fixup_video+0x0/0xc2 [ 1.036355] pci 0000:00:18.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036358] pci 0000:00:18.2: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036360] pci 0000:00:18.2: calling pci_fixup_video+0x0/0xc2 [ 1.036364] pci 0000:00:18.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036367] pci 0000:00:18.3: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036370] pci 0000:00:18.3: calling pci_fixup_video+0x0/0xc2 [ 1.036373] pci 0000:00:18.4: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036376] pci 0000:00:18.4: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036379] pci 0000:00:18.4: calling pci_fixup_video+0x0/0xc2 [ 1.036382] pci 0000:0b:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x12 [ 1.036402] pci 0000:0b:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036405] pci 0000:0b:00.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036407] pci 0000:0b:00.0: calling pci_fixup_video+0x0/0xc2 [ 1.036415] pci 0000:0b:00.0: Boot video device [ 1.036418] pciback 0000:0a:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036421] pciback 0000:0a:00.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036437] pciback 0000:0a:00.0: calling pci_fixup_video+0x0/0xc2 [ 1.036441] pciback 0000:0a:00.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036444] pciback 0000:0a:00.1: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036463] pciback 0000:0a:00.1: calling pci_fixup_video+0x0/0xc2 [ 1.036467] pciback 0000:0a:00.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036470] pciback 0000:0a:00.2: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036487] pciback 0000:0a:00.2: calling pci_fixup_video+0x0/0xc2 [ 1.036491] pciback 0000:0a:00.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036494] pciback 0000:0a:00.3: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036512] pciback 0000:0a:00.3: calling pci_fixup_video+0x0/0xc2 [ 1.036517] pciback 0000:0a:00.4: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036520] pciback 0000:0a:00.4: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036536] pciback 0000:0a:00.4: calling pci_fixup_video+0x0/0xc2 [ 1.036540] pciback 0000:0a:00.5: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036543] pciback 0000:0a:00.5: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036563] pciback 0000:0a:00.5: calling pci_fixup_video+0x0/0xc2 [ 1.036583] pciback 0000:0a:00.6: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036586] pciback 0000:0a:00.6: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036600] pciback 0000:0a:00.6: calling pci_fixup_video+0x0/0xc2 [ 1.036604] pciback 0000:0a:00.7: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036607] pciback 0000:0a:00.7: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036624] pciback 0000:0a:00.7: calling pci_fixup_video+0x0/0xc2 [ 1.036628] pci 0000:09:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036631] pci 0000:09:00.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036633] pci 0000:09:00.0: calling pci_fixup_video+0x0/0xc2 [ 1.036636] pci 0000:08:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036639] pci 0000:08:00.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036641] pci 0000:08:00.0: calling pci_fixup_video+0x0/0xc2 [ 1.036644] pci 0000:06:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036647] pci 0000:06:00.0: calling quirk_xio2000a+0x0/0xa1 [ 1.036649] pci 0000:06:00.0: TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled [ 1.036662] pci 0000:06:00.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036664] pci 0000:06:00.0: calling pci_fixup_video+0x0/0xc2 [ 1.036668] pciback 0000:07:01.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036670] pciback 0000:07:01.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036685] pciback 0000:07:01.0: calling pci_fixup_video+0x0/0xc2 [ 1.036689] pciback 0000:07:01.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036691] pciback 0000:07:01.1: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036706] pciback 0000:07:01.1: calling pci_fixup_video+0x0/0xc2 [ 1.036710] pciback 0000:07:01.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036712] pciback 0000:07:01.2: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036737] pciback 0000:07:01.2: calling pci_fixup_video+0x0/0xc2 [ 1.036740] pciback 0000:05:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036743] pciback 0000:05:00.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036745] pciback 0000:05:00.0: calling pci_fixup_video+0x0/0xc2 [ 1.036750] pciback 0000:05:00.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036753] pciback 0000:05:00.1: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036755] pciback 0000:05:00.1: calling pci_fixup_video+0x0/0xc2 [ 1.036759] pciback 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036761] pciback 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036775] pciback 0000:04:00.0: calling pci_fixup_video+0x0/0xc2 [ 1.036779] pciback 0000:04:00.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036782] pciback 0000:04:00.1: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036799] pciback 0000:04:00.1: calling pci_fixup_video+0x0/0xc2 [ 1.036803] pciback 0000:04:00.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036805] pciback 0000:04:00.2: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036821] pciback 0000:04:00.2: calling pci_fixup_video+0x0/0xc2 [ 1.036825] pciback 0000:04:00.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036827] pciback 0000:04:00.3: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036845] pciback 0000:04:00.3: calling pci_fixup_video+0x0/0xc2 [ 1.036848] pciback 0000:04:00.4: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036851] pciback 0000:04:00.4: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036865] pciback 0000:04:00.4: calling pci_fixup_video+0x0/0xc2 [ 1.036869] pciback 0000:04:00.5: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036872] pciback 0000:04:00.5: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036889] pciback 0000:04:00.5: calling pci_fixup_video+0x0/0xc2 [ 1.036893] pciback 0000:04:00.6: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036896] pciback 0000:04:00.6: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036913] pciback 0000:04:00.6: calling pci_fixup_video+0x0/0xc2 [ 1.036916] pciback 0000:04:00.7: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036919] pciback 0000:04:00.7: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036936] pciback 0000:04:00.7: calling pci_fixup_video+0x0/0xc2 [ 1.036940] pciback 0000:03:06.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.036942] pciback 0000:03:06.0: calling quirk_usb_early_handoff+0x0/0x588 [ 1.036945] pciback 0000:03:06.0: calling pci_fixup_video+0x0/0xc2 [ 1.036993] Trying to unpack rootfs image as initramfs... [ 1.043888] Freeing initrd memory: 9918k freed [ 1.046607] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.046615] DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 1.046619] DMA: software IO TLB at phys 0x20000000 - 0x24000000 [ 1.046788] kvm: no hardware support [ 1.046794] has_svm: svm not available [ 1.046796] kvm: no hardware support [ 1.050359] Scanning for low memory corruption every 60 seconds [ 1.050696] audit: initializing netlink socket (disabled) [ 1.050711] type=2000 audit(1305911089.504:1): initialized [ 1.051200] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.055595] VFS: Disk quotas dquot_6.5.2 [ 1.055738] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.057937] Btrfs loaded [ 1.057945] msgmni has been set to 1111 [ 1.058055] SELinux: Registering netfilter hooks [ 1.059127] alg: No test for stdrng (krng) [ 1.059430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.059437] io scheduler noop registered [ 1.059440] io scheduler anticipatory registered [ 1.059442] io scheduler deadline registered [ 1.059532] io scheduler cfq registered (default) [ 1.059989] alloc irq_desc for 1759 on node -1 [ 1.059993] alloc kstat_irqs on node -1 [ 1.060032] pcieport 0000:00:02.0: setting latency timer to 64 [ 1.060393] alloc irq_desc for 1758 on node -1 [ 1.060401] alloc kstat_irqs on node -1 [ 1.060420] pcieport 0000:00:03.0: setting latency timer to 64 [ 1.060646] alloc irq_desc for 1757 on node -1 [ 1.060648] alloc kstat_irqs on node -1 [ 1.060667] pcieport 0000:00:05.0: setting latency timer to 64 [ 1.061027] alloc irq_desc for 1756 on node -1 [ 1.061029] alloc kstat_irqs on node -1 [ 1.061051] pcieport 0000:00:06.0: setting latency timer to 64 [ 1.061372] alloc irq_desc for 1755 on node -1 [ 1.061374] alloc kstat_irqs on node -1 [ 1.061393] pcieport 0000:00:0a.0: setting latency timer to 64 [ 1.061617] alloc irq_desc for 1754 on node -1 [ 1.061619] alloc kstat_irqs on node -1 [ 1.061638] pcieport 0000:00:0b.0: setting latency timer to 64 [ 1.061985] alloc irq_desc for 1753 on node -1 [ 1.061987] alloc kstat_irqs on node -1 [ 1.062013] pcieport 0000:00:0d.0: setting latency timer to 64 [ 1.062347] alloc irq_desc for 1752 on node -1 [ 1.062349] alloc kstat_irqs on node -1 [ 1.062380] pcieport 0000:00:15.0: setting latency timer to 64 [ 1.062788] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.062992] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.064312] vesafb: framebuffer at 0xfb000000, mapped to 0xffffc90010100000, using 10240k, total 14336k [ 1.064317] vesafb: mode is 1280x1024x32, linelength=5120, pages=0 [ 1.064320] vesafb: scrolling: redraw [ 1.064324] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.085940] Console: switching to colour frame buffer device 160x64 [ 1.106391] fb0: VESA VGA frame buffer device [ 1.106981] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.107190] ACPI: Power Button [PWRB] [ 1.107541] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.107719] ACPI: Power Button [PWRF] [ 1.108763] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 1.108984] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 1.109195] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 1.109408] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 1.109617] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 1.109900] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 1.112209] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 1.112455] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 1.112660] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D0._STA] (Node ffff8800278b0240), AE_NOT_EXIST [ 1.112956] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D0._STA] (Node ffff8800278b0240), AE_NOT_EXIST [ 1.113244] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 1.113486] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 1.113675] ACPI Error (psparse-0537): Method parse/execution failed [\PRID.P_D1._STA] (Node ffff8800278b0320), AE_NOT_EXIST [ 1.113969] ACPI Error (uteval-0250): Method execution failed [\PRID.P_D1._STA] (Node ffff8800278b0320), AE_NOT_EXIST [ 1.114270] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 1.114513] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 1.114702] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D0._STA] (Node ffff8800278b0500), AE_NOT_EXIST [ 1.114996] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D0._STA] (Node ffff8800278b0500), AE_NOT_EXIST [ 1.115283] ACPI Error: No handler for Region [SACS] (ffff8800278b3480) [PCI_Config] (20090903/evregion-319) [ 1.115526] ACPI Error: Region PCI_Config(2) has no handler (20090903/exfldio-295) [ 1.115715] ACPI Error (psparse-0537): Method parse/execution failed [\SECD.S_D1._STA] (Node ffff8800278b05e0), AE_NOT_EXIST [ 1.116009] ACPI Error (uteval-0250): Method execution failed [\SECD.S_D1._STA] (Node ffff8800278b05e0), AE_NOT_EXIST [ 1.116500] Event-channel device installed. [ 1.116662] pciback: pcistub_init_devices_late [ 1.116664] pciback 0000:03:06.0: initializing... [ 1.116667] pciback 0000:03:06.0: initializing config [ 1.116669] pciback 0000:03:06.0: initializing virtual configuration space [ 1.116672] pciback 0000:03:06.0: added config field at offset 0x00 [ 1.116674] pciback 0000:03:06.0: added config field at offset 0x02 [ 1.116677] pciback 0000:03:06.0: added config field at offset 0x04 [ 1.116679] pciback 0000:03:06.0: added config field at offset 0x3c [ 1.116681] pciback 0000:03:06.0: added config field at offset 0x3d [ 1.116683] pciback 0000:03:06.0: added config field at offset 0x0c [ 1.116685] pciback 0000:03:06.0: added config field at offset 0x0d [ 1.116688] pciback 0000:03:06.0: added config field at offset 0x0f [ 1.116690] pciback 0000:03:06.0: added config field at offset 0x10 [ 1.116693] pciback 0000:03:06.0: added config field at offset 0x14 [ 1.116695] pciback 0000:03:06.0: added config field at offset 0x18 [ 1.116697] pciback 0000:03:06.0: added config field at offset 0x1c [ 1.116700] pciback 0000:03:06.0: added config field at offset 0x20 [ 1.116702] pciback 0000:03:06.0: added config field at offset 0x24 [ 1.116706] pciback 0000:03:06.0: added config field at offset 0x30 [ 1.116726] pciback 0000:03:06.0: Found capability 0x1 at 0xc0 [ 1.116728] pciback 0000:03:06.0: added config field at offset 0xc0 [ 1.116730] pciback 0000:03:06.0: added config field at offset 0xc2 [ 1.116735] pciback 0000:03:06.0: added config field at offset 0xc4 [ 1.116737] pciback 0000:03:06.0: added config field at offset 0xc6 [ 1.116739] pciback 0000:03:06.0: added config field at offset 0xc7 [ 1.116741] pciback 0000:03:06.0: enabling device [ 1.116756] xen: registering gsi 22 triggering 0 polarity 1 [ 1.116765] alloc irq_desc for 22 on node 0 [ 1.116767] alloc kstat_irqs on node 0 [ 1.116770] xen: --> irq=22 [ 1.116798] pciback 0000:03:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.116985] pciback 0000:03:06.0: reset device [ 1.116994] pciback 0000:03:06.0: PCI INT A disabled [ 1.117117] pciback 0000:04:00.7: initializing... [ 1.117120] pciback 0000:04:00.7: initializing config [ 1.117121] pciback 0000:04:00.7: initializing virtual configuration space [ 1.117123] pciback 0000:04:00.7: added config field at offset 0x00 [ 1.117125] pciback 0000:04:00.7: added config field at offset 0x02 [ 1.117127] pciback 0000:04:00.7: added config field at offset 0x04 [ 1.117129] pciback 0000:04:00.7: added config field at offset 0x3c [ 1.117131] pciback 0000:04:00.7: added config field at offset 0x3d [ 1.117133] pciback 0000:04:00.7: added config field at offset 0x0c [ 1.117135] pciback 0000:04:00.7: added config field at offset 0x0d [ 1.117137] pciback 0000:04:00.7: added config field at offset 0x0f [ 1.117139] pciback 0000:04:00.7: added config field at offset 0x10 [ 1.117141] pciback 0000:04:00.7: added config field at offset 0x14 [ 1.117144] pciback 0000:04:00.7: added config field at offset 0x18 [ 1.117146] pciback 0000:04:00.7: added config field at offset 0x1c [ 1.117148] pciback 0000:04:00.7: added config field at offset 0x20 [ 1.117150] pciback 0000:04:00.7: added config field at offset 0x24 [ 1.117152] pciback 0000:04:00.7: added config field at offset 0x30 [ 1.117178] pciback 0000:04:00.7: Found capability 0x1 at 0x78 [ 1.117180] pciback 0000:04:00.7: added config field at offset 0x78 [ 1.117182] pciback 0000:04:00.7: added config field at offset 0x7a [ 1.117186] pciback 0000:04:00.7: added config field at offset 0x7c [ 1.117188] pciback 0000:04:00.7: added config field at offset 0x7e [ 1.117190] pciback 0000:04:00.7: added config field at offset 0x7f [ 1.117192] pciback 0000:04:00.7: enabling device [ 1.117202] xen: registering gsi 43 triggering 0 polarity 1 [ 1.117206] alloc irq_desc for 43 on node 0 [ 1.117208] alloc kstat_irqs on node 0 [ 1.117210] xen: --> irq=43 [ 1.117225] pciback 0000:04:00.7: PCI INT D -> GSI 43 (level, low) -> IRQ 43 [ 1.117394] pciback 0000:04:00.7: reset device [ 1.117401] pciback 0000:04:00.7: PCI INT D disabled [ 1.117522] pciback 0000:04:00.6: initializing... [ 1.117524] pciback 0000:04:00.6: initializing config [ 1.117526] pciback 0000:04:00.6: initializing virtual configuration space [ 1.117528] pciback 0000:04:00.6: added config field at offset 0x00 [ 1.117530] pciback 0000:04:00.6: added config field at offset 0x02 [ 1.117532] pciback 0000:04:00.6: added config field at offset 0x04 [ 1.117534] pciback 0000:04:00.6: added config field at offset 0x3c [ 1.117536] pciback 0000:04:00.6: added config field at offset 0x3d [ 1.117537] pciback 0000:04:00.6: added config field at offset 0x0c [ 1.117539] pciback 0000:04:00.6: added config field at offset 0x0d [ 1.117541] pciback 0000:04:00.6: added config field at offset 0x0f [ 1.117543] pciback 0000:04:00.6: added config field at offset 0x10 [ 1.117546] pciback 0000:04:00.6: added config field at offset 0x14 [ 1.117548] pciback 0000:04:00.6: added config field at offset 0x18 [ 1.117550] pciback 0000:04:00.6: added config field at offset 0x1c [ 1.117552] pciback 0000:04:00.6: added config field at offset 0x20 [ 1.117554] pciback 0000:04:00.6: added config field at offset 0x24 [ 1.117556] pciback 0000:04:00.6: added config field at offset 0x30 [ 1.117585] pciback 0000:04:00.6: Found capability 0x1 at 0x78 [ 1.117587] pciback 0000:04:00.6: added config field at offset 0x78 [ 1.117589] pciback 0000:04:00.6: added config field at offset 0x7a [ 1.117593] pciback 0000:04:00.6: added config field at offset 0x7c [ 1.117595] pciback 0000:04:00.6: added config field at offset 0x7e [ 1.117596] pciback 0000:04:00.6: added config field at offset 0x7f [ 1.117598] pciback 0000:04:00.6: enabling device [ 1.117608] xen: registering gsi 43 triggering 0 polarity 1 [ 1.117610] xen_allocate_pirq: returning irq 43 for gsi 43 [ 1.117741] xen: --> irq=43 [ 1.117743] Already setup the GSI :43 [ 1.120656] pciback 0000:04:00.6: PCI INT D -> GSI 43 (level, low) -> IRQ 43 [ 1.120656] pciback 0000:04:00.6: reset device [ 1.120656] pciback 0000:04:00.6: PCI INT D disabled [ 1.120656] pciback 0000:04:00.5: initializing... [ 1.120656] pciback 0000:04:00.5: initializing config [ 1.120656] pciback 0000:04:00.5: initializing virtual configuration space [ 1.120656] pciback 0000:04:00.5: added config field at offset 0x00 [ 1.120656] pciback 0000:04:00.5: added config field at offset 0x02 [ 1.120656] pciback 0000:04:00.5: added config field at offset 0x04 [ 1.120656] pciback 0000:04:00.5: added config field at offset 0x3c [ 1.120656] pciback 0000:04:00.5: added config field at offset 0x3d [ 1.120656] pciback 0000:04:00.5: added config field at offset 0x0c [ 1.120656] pciback 0000:04:00.5: added config field at offset 0x0d [ 1.120656] pciback 0000:04:00.5: added config field at offset 0x0f [ 1.120656] pciback 0000:04:00.5: added config field at offset 0x10 [ 1.120656] pciback 0000:04:00.5: added config field at offset 0x14 [ 1.120656] pciback 0000:04:00.5: added config field at offset 0x18 [ 1.120656] pciback 0000:04:00.5: added config field at offset 0x1c [ 1.133443] pciback 0000:04:00.5: added config field at offset 0x20 [ 1.133445] pciback 0000:04:00.5: added config field at offset 0x24 [ 1.133447] pciback 0000:04:00.5: added config field at offset 0x30 [ 1.133479] pciback 0000:04:00.5: Found capability 0x1 at 0x78 [ 1.133481] pciback 0000:04:00.5: added config field at offset 0x78 [ 1.133483] pciback 0000:04:00.5: added config field at offset 0x7a [ 1.133487] pciback 0000:04:00.5: added config field at offset 0x7c [ 1.133489] pciback 0000:04:00.5: added config field at offset 0x7e [ 1.133491] pciback 0000:04:00.5: added config field at offset 0x7f [ 1.133492] pciback 0000:04:00.5: enabling device [ 1.133502] xen: registering gsi 42 triggering 0 polarity 1 [ 1.133506] alloc irq_desc for 42 on node 0 [ 1.133508] alloc kstat_irqs on node 0 [ 1.133510] xen: --> irq=42 [ 1.133525] pciback 0000:04:00.5: PCI INT C -> GSI 42 (level, low) -> IRQ 42 [ 1.137437] pciback 0000:04:00.5: reset device [ 1.137437] pciback 0000:04:00.5: PCI INT C disabled [ 1.137437] pciback 0000:04:00.4: initializing... [ 1.137437] pciback 0000:04:00.4: initializing config [ 1.137437] pciback 0000:04:00.4: initializing virtual configuration space [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x00 [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x02 [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x04 [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x3c [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x3d [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x0c [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x0d [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x0f [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x10 [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x14 [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x18 [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x1c [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x20 [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x24 [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x30 [ 1.137437] pciback 0000:04:00.4: Found capability 0x1 at 0x78 [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x78 [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x7a [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x7c [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x7e [ 1.137437] pciback 0000:04:00.4: added config field at offset 0x7f [ 1.137437] pciback 0000:04:00.4: enabling device [ 1.137437] xen: registering gsi 42 triggering 0 polarity 1 [ 1.137437] xen_allocate_pirq: returning irq 42 for gsi 42 [ 1.137437] xen: --> irq=42 [ 1.149956] Already setup the GSI :42 [ 1.153953] pciback 0000:04:00.4: PCI INT C -> GSI 42 (level, low) -> IRQ 42 [ 1.153953] pciback 0000:04:00.4: reset device [ 1.153953] pciback 0000:04:00.4: PCI INT C disabled [ 1.153953] pciback 0000:04:00.3: initializing... [ 1.153953] pciback 0000:04:00.3: initializing config [ 1.153953] pciback 0000:04:00.3: initializing virtual configuration space [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x00 [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x02 [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x04 [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x3c [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x3d [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x0c [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x0d [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x0f [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x10 [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x14 [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x18 [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x1c [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x20 [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x24 [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x30 [ 1.153953] pciback 0000:04:00.3: Found capability 0x1 at 0x78 [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x78 [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x7a [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x7c [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x7e [ 1.153953] pciback 0000:04:00.3: added config field at offset 0x7f [ 1.153953] pciback 0000:04:00.3: enabling device [ 1.153953] xen: registering gsi 41 triggering 0 polarity 1 [ 1.153953] alloc irq_desc for 41 on node 0 [ 1.153953] alloc kstat_irqs on node 0 [ 1.167123] xen: --> irq=41 [ 1.167137] pciback 0000:04:00.3: PCI INT B -> GSI 41 (level, low) -> IRQ 41 [ 1.171121] pciback 0000:04:00.3: reset device [ 1.171121] pciback 0000:04:00.3: PCI INT B disabled [ 1.171121] pciback 0000:04:00.2: initializing... [ 1.171121] pciback 0000:04:00.2: initializing config [ 1.171121] pciback 0000:04:00.2: initializing virtual configuration space [ 1.171121] pciback 0000:04:00.2: added config field at offset 0x00 [ 1.171121] pciback 0000:04:00.2: added config field at offset 0x02 [ 1.171121] pciback 0000:04:00.2: added config field at offset 0x04 [ 1.171121] pciback 0000:04:00.2: added config field at offset 0x3c [ 1.171121] pciback 0000:04:00.2: added config field at offset 0x3d [ 1.171121] pciback 0000:04:00.2: added config field at offset 0x0c [ 1.171121] pciback 0000:04:00.2: added config field at offset 0x0d [ 1.171121] pciback 0000:04:00.2: added config field at offset 0x0f [ 1.171121] pciback 0000:04:00.2: added config field at offset 0x10 [ 1.171121] pciback 0000:04:00.2: added config field at offset 0x14 [ 1.178942] pciback 0000:04:00.2: added config field at offset 0x18 [ 1.178944] pciback 0000:04:00.2: added config field at offset 0x1c [ 1.178947] pciback 0000:04:00.2: added config field at offset 0x20 [ 1.178949] pciback 0000:04:00.2: added config field at offset 0x24 [ 1.178951] pciback 0000:04:00.2: added config field at offset 0x30 [ 1.178977] pciback 0000:04:00.2: Found capability 0x1 at 0x78 [ 1.178979] pciback 0000:04:00.2: added config field at offset 0x78 [ 1.178981] pciback 0000:04:00.2: added config field at offset 0x7a [ 1.178985] pciback 0000:04:00.2: added config field at offset 0x7c [ 1.178987] pciback 0000:04:00.2: added config field at offset 0x7e [ 1.178988] pciback 0000:04:00.2: added config field at offset 0x7f [ 1.178990] pciback 0000:04:00.2: enabling device [ 1.179000] xen: registering gsi 41 triggering 0 polarity 1 [ 1.179002] xen_allocate_pirq: returning irq 41 for gsi 41 [ 1.182938] xen: --> irq=41 [ 1.185024] Already setup the GSI :41 [ 1.189021] pciback 0000:04:00.2: PCI INT B -> GSI 41 (level, low) -> IRQ 41 [ 1.189021] pciback 0000:04:00.2: reset device [ 1.189021] pciback 0000:04:00.2: PCI INT B disabled [ 1.189021] pciback 0000:04:00.1: initializing... [ 1.189021] pciback 0000:04:00.1: initializing config [ 1.189021] pciback 0000:04:00.1: initializing virtual configuration space [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x00 [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x02 [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x04 [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x3c [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x3d [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x0c [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x0d [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x0f [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x10 [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x14 [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x18 [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x1c [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x20 [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x24 [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x30 [ 1.189021] pciback 0000:04:00.1: Found capability 0x1 at 0x78 [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x78 [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x7a [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x7c [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x7e [ 1.189021] pciback 0000:04:00.1: added config field at offset 0x7f [ 1.189021] pciback 0000:04:00.1: enabling device [ 1.189021] xen: registering gsi 40 triggering 0 polarity 1 [ 1.189021] alloc irq_desc for 40 on node 0 [ 1.189021] alloc kstat_irqs on node 0 [ 1.203640] xen: --> irq=40 [ 1.203654] pciback 0000:04:00.1: PCI INT A -> GSI 40 (level, low) -> IRQ 40 [ 1.207637] pciback 0000:04:00.1: reset device [ 1.207637] pciback 0000:04:00.1: PCI INT A disabled [ 1.207637] pciback 0000:04:00.0: initializing... [ 1.207637] pciback 0000:04:00.0: initializing config [ 1.207637] pciback 0000:04:00.0: initializing virtual configuration space [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x00 [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x02 [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x04 [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x3c [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x3d [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x0c [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x0d [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x0f [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x10 [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x14 [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x18 [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x1c [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x20 [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x24 [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x30 [ 1.207637] pciback 0000:04:00.0: Found capability 0x1 at 0x78 [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x78 [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x7a [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x7c [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x7e [ 1.207637] pciback 0000:04:00.0: added config field at offset 0x7f [ 1.207637] pciback 0000:04:00.0: enabling device [ 1.207637] xen: registering gsi 40 triggering 0 polarity 1 [ 1.207637] xen_allocate_pirq: returning irq 40 for gsi 40 [ 1.207637] xen: --> irq=40 [ 1.222972] Already setup the GSI :40 [ 1.226969] pciback 0000:04:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 [ 1.226969] pciback 0000:04:00.0: reset device [ 1.226969] pciback 0000:04:00.0: PCI INT A disabled [ 1.226969] pciback 0000:05:00.1: initializing... [ 1.226969] pciback 0000:05:00.1: initializing config [ 1.226969] pciback 0000:05:00.1: initializing virtual configuration space [ 1.226969] pciback 0000:05:00.1: added config field at offset 0x00 [ 1.226969] pciback 0000:05:00.1: added config field at offset 0x02 [ 1.226969] pciback 0000:05:00.1: added config field at offset 0x04 [ 1.226969] pciback 0000:05:00.1: added config field at offset 0x3c [ 1.226969] pciback 0000:05:00.1: added config field at offset 0x3d [ 1.226969] pciback 0000:05:00.1: added config field at offset 0x0c [ 1.226969] pciback 0000:05:00.1: added config field at offset 0x0d [ 1.226969] pciback 0000:05:00.1: added config field at offset 0x0f [ 1.242970] pciback 0000:05:00.1: added config field at offset 0x10 [ 1.242972] pciback 0000:05:00.1: added config field at offset 0x14 [ 1.242974] pciback 0000:05:00.1: added config field at offset 0x18 [ 1.242977] pciback 0000:05:00.1: added config field at offset 0x1c [ 1.242979] pciback 0000:05:00.1: added config field at offset 0x20 [ 1.242981] pciback 0000:05:00.1: added config field at offset 0x24 [ 1.242983] pciback 0000:05:00.1: added config field at offset 0x30 [ 1.243007] pciback 0000:05:00.1: Found capability 0x1 at 0x50 [ 1.243009] pciback 0000:05:00.1: added config field at offset 0x50 [ 1.243011] pciback 0000:05:00.1: added config field at offset 0x52 [ 1.243015] pciback 0000:05:00.1: added config field at offset 0x54 [ 1.243017] pciback 0000:05:00.1: added config field at offset 0x56 [ 1.243019] pciback 0000:05:00.1: added config field at offset 0x57 [ 1.243021] pciback 0000:05:00.1: enabling device [ 1.243029] xen: registering gsi 33 triggering 0 polarity 1 [ 1.243033] alloc irq_desc for 33 on node 0 [ 1.243034] alloc kstat_irqs on node 0 [ 1.243037] xen: --> irq=33 [ 1.243050] pciback 0000:05:00.1: PCI INT B -> GSI 33 (level, low) -> IRQ 33 [ 1.246966] pciback 0000:05:00.1: reset device [ 1.246966] pciback 0000:05:00.1: PCI INT B disabled [ 1.246966] pciback 0000:05:00.0: initializing... [ 1.246966] pciback 0000:05:00.0: initializing config [ 1.246966] pciback 0000:05:00.0: initializing virtual configuration space [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x00 [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x02 [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x04 [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x3c [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x3d [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x0c [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x0d [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x0f [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x10 [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x14 [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x18 [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x1c [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x20 [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x24 [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x30 [ 1.246966] pciback 0000:05:00.0: Found capability 0x1 at 0x50 [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x50 [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x52 [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x54 [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x56 [ 1.246966] pciback 0000:05:00.0: added config field at offset 0x57 [ 1.246966] pciback 0000:05:00.0: enabling device [ 1.246966] pciback 0000:05:00.0: enabling device (0000 -> 0003) [ 1.246966] xen: registering gsi 32 triggering 0 polarity 1 [ 1.246966] alloc irq_desc for 32 on node 0 [ 1.246966] alloc kstat_irqs on node 0 [ 1.263781] xen: --> irq=32 [ 1.263814] pciback 0000:05:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 [ 1.267778] pciback 0000:05:00.0: reset device [ 1.267778] pciback 0000:05:00.0: PCI INT A disabled [ 1.267778] pciback 0000:07:01.2: initializing... [ 1.267778] pciback 0000:07:01.2: initializing config [ 1.267778] pciback 0000:07:01.2: initializing virtual configuration space [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x00 [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x02 [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x04 [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x3c [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x3d [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x0c [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x0d [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x0f [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x10 [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x14 [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x18 [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x1c [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x20 [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x24 [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x30 [ 1.267778] pciback 0000:07:01.2: Found capability 0x1 at 0x40 [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x40 [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x42 [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x44 [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x46 [ 1.267778] pciback 0000:07:01.2: added config field at offset 0x47 [ 1.267778] pciback 0000:07:01.2: enabling device [ 1.267778] xen: registering gsi 46 triggering 0 polarity 1 [ 1.267778] alloc irq_desc for 46 on node 0 [ 1.267778] alloc kstat_irqs on node 0 [ 1.277696] xen: --> irq=46 [ 1.277710] pciback 0000:07:01.2: PCI INT C -> GSI 46 (level, low) -> IRQ 46 [ 1.284211] pciback 0000:07:01.2: reset device [ 1.284211] pciback 0000:07:01.2: PCI INT C disabled [ 1.288213] pciback 0000:07:01.1: initializing... [ 1.288213] pciback 0000:07:01.1: initializing config [ 1.288213] pciback 0000:07:01.1: initializing virtual configuration space [ 1.291155] pciback 0000:07:01.1: added config field at offset 0x00 [ 1.291157] pciback 0000:07:01.1: added config field at offset 0x02 [ 1.291159] pciback 0000:07:01.1: added config field at offset 0x04 [ 1.291161] pciback 0000:07:01.1: added config field at offset 0x3c [ 1.291163] pciback 0000:07:01.1: added config field at offset 0x3d [ 1.291165] pciback 0000:07:01.1: added config field at offset 0x0c [ 1.291168] pciback 0000:07:01.1: added config field at offset 0x0d [ 1.291170] pciback 0000:07:01.1: added config field at offset 0x0f [ 1.291172] pciback 0000:07:01.1: added config field at offset 0x10 [ 1.291174] pciback 0000:07:01.1: added config field at offset 0x14 [ 1.291177] pciback 0000:07:01.1: added config field at offset 0x18 [ 1.291179] pciback 0000:07:01.1: added config field at offset 0x1c [ 1.291181] pciback 0000:07:01.1: added config field at offset 0x20 [ 1.291183] pciback 0000:07:01.1: added config field at offset 0x24 [ 1.291185] pciback 0000:07:01.1: added config field at offset 0x30 [ 1.291202] pciback 0000:07:01.1: Found capability 0x1 at 0x40 [ 1.291204] pciback 0000:07:01.1: added config field at offset 0x40 [ 1.291205] pciback 0000:07:01.1: added config field at offset 0x42 [ 1.291210] pciback 0000:07:01.1: added config field at offset 0x44 [ 1.291212] pciback 0000:07:01.1: added config field at offset 0x46 [ 1.291213] pciback 0000:07:01.1: added config field at offset 0x47 [ 1.291215] pciback 0000:07:01.1: enabling device [ 1.291226] xen: registering gsi 45 triggering 0 polarity 1 [ 1.291230] alloc irq_desc for 45 on node 0 [ 1.291232] alloc kstat_irqs on node 0 [ 1.291234] xen: --> irq=45 [ 1.291248] pciback 0000:07:01.1: PCI INT B -> GSI 45 (level, low) -> IRQ 45 [ 1.295147] pciback 0000:07:01.1: reset device [ 1.295147] pciback 0000:07:01.1: PCI INT B disabled [ 1.295147] pciback 0000:07:01.0: initializing... [ 1.295147] pciback 0000:07:01.0: initializing config [ 1.295147] pciback 0000:07:01.0: initializing virtual configuration space [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x00 [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x02 [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x04 [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x3c [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x3d [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x0c [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x0d [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x0f [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x10 [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x14 [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x18 [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x1c [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x20 [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x24 [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x30 [ 1.295147] pciback 0000:07:01.0: Found capability 0x1 at 0x40 [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x40 [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x42 [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x44 [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x46 [ 1.295147] pciback 0000:07:01.0: added config field at offset 0x47 [ 1.295147] pciback 0000:07:01.0: enabling device [ 1.295147] xen: registering gsi 44 triggering 0 polarity 1 [ 1.295147] alloc irq_desc for 44 on node 0 [ 1.295147] alloc kstat_irqs on node 0 [ 1.304420] xen: --> irq=44 [ 1.304434] pciback 0000:07:01.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 [ 1.308414] pciback 0000:07:01.0: reset device [ 1.308414] pciback 0000:07:01.0: PCI INT A disabled [ 1.308414] pciback 0000:0a:00.7: initializing... [ 1.308414] pciback 0000:0a:00.7: initializing config [ 1.308414] pciback 0000:0a:00.7: initializing virtual configuration space [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x00 [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x02 [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x04 [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x3c [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x3d [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x0c [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x0d [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x0f [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x10 [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x14 [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x18 [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x1c [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x20 [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x24 [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x30 [ 1.308414] pciback 0000:0a:00.7: Found capability 0x1 at 0x78 [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x78 [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x7a [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x7c [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x7e [ 1.308414] pciback 0000:0a:00.7: added config field at offset 0x7f [ 1.308414] pciback 0000:0a:00.7: enabling device [ 1.308414] xen: registering gsi 31 triggering 0 polarity 1 [ 1.308414] alloc irq_desc for 31 on node 0 [ 1.308414] alloc kstat_irqs on node 0 [ 1.317596] xen: --> irq=31 [ 1.317611] pciback 0000:0a:00.7: PCI INT D -> GSI 31 (level, low) -> IRQ 31 [ 1.321594] pciback 0000:0a:00.7: reset device [ 1.321594] pciback 0000:0a:00.7: PCI INT D disabled [ 1.321594] pciback 0000:0a:00.6: initializing... [ 1.321594] pciback 0000:0a:00.6: initializing config [ 1.321594] pciback 0000:0a:00.6: initializing virtual configuration space [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x00 [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x02 [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x04 [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x3c [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x3d [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x0c [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x0d [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x0f [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x10 [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x14 [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x18 [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x1c [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x20 [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x24 [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x30 [ 1.321594] pciback 0000:0a:00.6: Found capability 0x1 at 0x78 [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x78 [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x7a [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x7c [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x7e [ 1.321594] pciback 0000:0a:00.6: added config field at offset 0x7f [ 1.321594] pciback 0000:0a:00.6: enabling device [ 1.321594] xen: registering gsi 31 triggering 0 polarity 1 [ 1.321594] xen_allocate_pirq: returning irq 31 for gsi 31 [ 1.321594] xen: --> irq=31 [ 1.337749] Already setup the GSI :31 [ 1.341746] pciback 0000:0a:00.6: PCI INT D -> GSI 31 (level, low) -> IRQ 31 [ 1.341746] pciback 0000:0a:00.6: reset device [ 1.341746] pciback 0000:0a:00.6: PCI INT D disabled [ 1.341746] pciback 0000:0a:00.5: initializing... [ 1.341746] pciback 0000:0a:00.5: initializing config [ 1.341746] pciback 0000:0a:00.5: initializing virtual configuration space [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x00 [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x02 [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x04 [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x3c [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x3d [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x0c [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x0d [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x0f [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x10 [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x14 [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x18 [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x1c [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x20 [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x24 [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x30 [ 1.341746] pciback 0000:0a:00.5: Found capability 0x1 at 0x78 [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x78 [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x7a [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x7c [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x7e [ 1.341746] pciback 0000:0a:00.5: added config field at offset 0x7f [ 1.341746] pciback 0000:0a:00.5: enabling device [ 1.341746] xen: registering gsi 30 triggering 0 polarity 1 [ 1.341746] alloc irq_desc for 30 on node 0 [ 1.341746] alloc kstat_irqs on node 0 [ 1.358066] xen: --> irq=30 [ 1.358103] pciback 0000:0a:00.5: PCI INT C -> GSI 30 (level, low) -> IRQ 30 [ 1.362063] pciback 0000:0a:00.5: reset device [ 1.362063] pciback 0000:0a:00.5: PCI INT C disabled [ 1.362063] pciback 0000:0a:00.4: initializing... [ 1.362063] pciback 0000:0a:00.4: initializing config [ 1.362063] pciback 0000:0a:00.4: initializing virtual configuration space [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x00 [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x02 [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x04 [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x3c [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x3d [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x0c [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x0d [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x0f [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x10 [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x14 [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x18 [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x1c [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x20 [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x24 [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x30 [ 1.362063] pciback 0000:0a:00.4: Found capability 0x1 at 0x78 [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x78 [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x7a [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x7c [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x7e [ 1.362063] pciback 0000:0a:00.4: added config field at offset 0x7f [ 1.362063] pciback 0000:0a:00.4: enabling device [ 1.362063] xen: registering gsi 30 triggering 0 polarity 1 [ 1.362063] xen_allocate_pirq: returning irq 30 for gsi 30 [ 1.362063] xen: --> irq=30 [ 1.377314] Already setup the GSI :30 [ 1.381311] pciback 0000:0a:00.4: PCI INT C -> GSI 30 (level, low) -> IRQ 30 [ 1.381311] pciback 0000:0a:00.4: reset device [ 1.381311] pciback 0000:0a:00.4: PCI INT C disabled [ 1.381311] pciback 0000:0a:00.3: initializing... [ 1.381311] pciback 0000:0a:00.3: initializing config [ 1.381311] pciback 0000:0a:00.3: initializing virtual configuration space [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x00 [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x02 [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x04 [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x3c [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x3d [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x0c [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x0d [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x0f [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x10 [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x14 [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x18 [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x1c [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x20 [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x24 [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x30 [ 1.381311] pciback 0000:0a:00.3: Found capability 0x1 at 0x78 [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x78 [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x7a [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x7c [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x7e [ 1.381311] pciback 0000:0a:00.3: added config field at offset 0x7f [ 1.381311] pciback 0000:0a:00.3: enabling device [ 1.381311] xen: registering gsi 29 triggering 0 polarity 1 [ 1.381311] alloc irq_desc for 29 on node 0 [ 1.381311] alloc kstat_irqs on node 0 [ 1.395544] xen: --> irq=29 [ 1.395558] pciback 0000:0a:00.3: PCI INT B -> GSI 29 (level, low) -> IRQ 29 [ 1.399541] pciback 0000:0a:00.3: reset device [ 1.399541] pciback 0000:0a:00.3: PCI INT B disabled [ 1.399541] pciback 0000:0a:00.2: initializing... [ 1.399541] pciback 0000:0a:00.2: initializing config [ 1.399541] pciback 0000:0a:00.2: initializing virtual configuration space [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x00 [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x02 [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x04 [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x3c [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x3d [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x0c [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x0d [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x0f [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x10 [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x14 [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x18 [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x1c [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x20 [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x24 [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x30 [ 1.399541] pciback 0000:0a:00.2: Found capability 0x1 at 0x78 [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x78 [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x7a [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x7c [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x7e [ 1.399541] pciback 0000:0a:00.2: added config field at offset 0x7f [ 1.399541] pciback 0000:0a:00.2: enabling device [ 1.399541] xen: registering gsi 29 triggering 0 polarity 1 [ 1.399541] xen_allocate_pirq: returning irq 29 for gsi 29 [ 1.399541] xen: --> irq=29 [ 1.412717] Already setup the GSI :29 [ 1.416714] pciback 0000:0a:00.2: PCI INT B -> GSI 29 (level, low) -> IRQ 29 [ 1.416714] pciback 0000:0a:00.2: reset device [ 1.416714] pciback 0000:0a:00.2: PCI INT B disabled [ 1.416714] pciback 0000:0a:00.1: initializing... [ 1.416714] pciback 0000:0a:00.1: initializing config [ 1.416714] pciback 0000:0a:00.1: initializing virtual configuration space [ 1.416714] pciback 0000:0a:00.1: added config field at offset 0x00 [ 1.416714] pciback 0000:0a:00.1: added config field at offset 0x02 [ 1.416714] pciback 0000:0a:00.1: added config field at offset 0x04 [ 1.416714] pciback 0000:0a:00.1: added config field at offset 0x3c [ 1.416714] pciback 0000:0a:00.1: added config field at offset 0x3d [ 1.416714] pciback 0000:0a:00.1: added config field at offset 0x0c [ 1.416714] pciback 0000:0a:00.1: added config field at offset 0x0d [ 1.428768] pciback 0000:0a:00.1: added config field at offset 0x0f [ 1.428770] pciback 0000:0a:00.1: added config field at offset 0x10 [ 1.428772] pciback 0000:0a:00.1: added config field at offset 0x14 [ 1.428775] pciback 0000:0a:00.1: added config field at offset 0x18 [ 1.428777] pciback 0000:0a:00.1: added config field at offset 0x1c [ 1.428779] pciback 0000:0a:00.1: added config field at offset 0x20 [ 1.428781] pciback 0000:0a:00.1: added config field at offset 0x24 [ 1.428783] pciback 0000:0a:00.1: added config field at offset 0x30 [ 1.428817] pciback 0000:0a:00.1: Found capability 0x1 at 0x78 [ 1.428819] pciback 0000:0a:00.1: added config field at offset 0x78 [ 1.428821] pciback 0000:0a:00.1: added config field at offset 0x7a [ 1.428825] pciback 0000:0a:00.1: added config field at offset 0x7c [ 1.428827] pciback 0000:0a:00.1: added config field at offset 0x7e [ 1.428829] pciback 0000:0a:00.1: added config field at offset 0x7f [ 1.428831] pciback 0000:0a:00.1: enabling device [ 1.428841] xen: registering gsi 28 triggering 0 polarity 1 [ 1.428845] alloc irq_desc for 28 on node 0 [ 1.428847] alloc kstat_irqs on node 0 [ 1.428849] xen: --> irq=28 [ 1.428863] pciback 0000:0a:00.1: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 1.432764] pciback 0000:0a:00.1: reset device [ 1.432764] pciback 0000:0a:00.1: PCI INT A disabled [ 1.432764] pciback 0000:0a:00.0: initializing... [ 1.432764] pciback 0000:0a:00.0: initializing config [ 1.432764] pciback 0000:0a:00.0: initializing virtual configuration space [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x00 [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x02 [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x04 [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x3c [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x3d [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x0c [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x0d [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x0f [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x10 [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x14 [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x18 [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x1c [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x20 [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x24 [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x30 [ 1.432764] pciback 0000:0a:00.0: Found capability 0x1 at 0x78 [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x78 [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x7a [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x7c [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x7e [ 1.432764] pciback 0000:0a:00.0: added config field at offset 0x7f [ 1.432764] pciback 0000:0a:00.0: enabling device [ 1.432764] xen: registering gsi 28 triggering 0 polarity 1 [ 1.432764] xen_allocate_pirq: returning irq 28 for gsi 28 [ 1.432764] xen: --> irq=28 [ 1.443851] Already setup the GSI :28 [ 1.447848] pciback 0000:0a:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 1.447848] pciback 0000:0a:00.0: reset device [ 1.447848] pciback 0000:0a:00.0: PCI INT A disabled [ 1.461173] blktap_device_init: blktap device major 253 [ 1.465165] blktap_ring_init: blktap ring major: 251 [ 1.476372] registering netback [ 1.487008] alloc irq_desc for 1751 on node -1 [ 1.487011] alloc kstat_irqs on node -1 [ 1.487907] Non-volatile memory driver v1.3 [ 1.491899] Linux agpgart interface v0.103 [ 1.497538] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.506128] brd: module loaded [ 1.563679] loop: module loaded [ 1.568876] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.574421] ahci 0000:00:11.0: version 3.0 [ 1.574435] xen: registering gsi 19 triggering 0 polarity 1 [ 1.574444] alloc irq_desc for 19 on node 0 [ 1.574446] alloc kstat_irqs on node 0 [ 1.574450] xen: --> irq=19 [ 1.574479] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.579537] alloc irq_desc for 1750 on node -1 [ 1.579539] alloc kstat_irqs on node -1 [ 1.579635] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 1.583509] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.590487] scsi0 : ahci [ 1.595913] scsi1 : ahci [ 1.601213] scsi2 : ahci [ 1.606438] scsi3 : ahci [ 1.611531] ata1: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff100 irq 1750 [ 1.615512] ata2: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff180 irq 1750 [ 1.615512] ata3: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff200 irq 1750 [ 1.615512] ata4: SATA max UDMA/133 abar m1024@0xf98ff000 port 0xf98ff280 irq 1750 [ 1.631905] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI [ 1.635898] Copyright (c) 1999-2006 Intel Corporation. [ 1.641766] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 1.645759] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.651777] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 [ 1.655768] Copyright (c) 2007-2009 Intel Corporation. [ 1.661999] Intel(R) Virtual Function Network Driver - version 1.0.0-k0 [ 1.665992] Copyright (c) 2009 Intel Corporation. [ 1.672515] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.676509] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.683232] sky2 driver version 1.25 [ 1.688700] tun: Universal TUN/TAP device driver, 1.6 [ 1.692694] tun: (C) 1999-2004 Max Krasnyansky [ 1.699381] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.704762] xen: registering gsi 46 triggering 0 polarity 1 [ 1.704764] xen_allocate_pirq: returning irq 46 for gsi 46 [ 1.708743] xen: --> irq=46 [ 1.710144] Already setup the GSI :46 [ 1.714141] r8169 0000:09:00.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46 [ 1.714141] r8169 0000:09:00.0: enabling Mem-Wr-Inval [ 1.720935] r8169 0000:09:00.0: setting latency timer to 64 [ 1.720978] alloc irq_desc for 1749 on node -1 [ 1.720979] alloc kstat_irqs on node -1 [ 1.721210] eth0: RTL8168d/8111d at 0xffffc90000076000, 40:61:86:f4:67:d9, XID 081000c0 IRQ 1749 [ 1.777090] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.780154] xen: registering gsi 51 triggering 0 polarity 1 [ 1.780154] alloc irq_desc for 51 on node 0 [ 1.780154] alloc kstat_irqs on node 0 [ 1.782649] xen: --> irq=51 [ 1.782711] r8169 0000:08:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51 [ 1.786646] r8169 0000:08:00.0: enabling Mem-Wr-Inval [ 1.788392] r8169 0000:08:00.0: setting latency timer to 64 [ 1.788438] alloc irq_desc for 1748 on node -1 [ 1.788440] alloc kstat_irqs on node -1 [ 1.788797] eth1: RTL8168d/8111d at 0xffffc9000007a000, 40:61:86:f4:67:d8, XID 081000c0 IRQ 1748 [ 1.845066] console [netcon0] enabled [ 1.849058] netconsole: network logging started [ 1.856892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.862780] xen: registering gsi 17 triggering 0 polarity 1 [ 1.862784] alloc irq_desc for 17 on node 0 [ 1.862785] alloc kstat_irqs on node 0 [ 1.862788] xen: --> irq=17 [ 1.862819] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.868739] ehci_hcd 0000:00:12.2: enabling bus mastering [ 1.868744] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.874756] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.878750] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM [ 1.878750] ehci_hcd 0000:00:12.2: debug port 1 [ 1.878750] ehci_hcd 0000:00:12.2: enabling Mem-Wr-Inval [ 1.878750] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf98ff400 [ 1.908196] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.914107] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.918082] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.918082] usb usb1: Product: EHCI Host Controller [ 1.918082] usb usb1: Manufacturer: Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ehci_hcd [ 1.918082] usb usb1: SerialNumber: 0000:00:12.2 [ 1.944101] usb usb1: configuration #1 chosen from 1 choice [ 1.950266] hub 1-0:1.0: USB hub found [ 1.952294] ata2: SATA link down (SStatus 0 SControl 300) [ 1.952349] ata4: SATA link down (SStatus 0 SControl 300) [ 1.968237] hub 1-0:1.0: 5 ports detected [ 1.974268] xen: registering gsi 17 triggering 0 polarity 1 [ 1.974270] xen_allocate_pirq: returning irq 17 for gsi 17 [ 1.978181] xen: --> irq=17 [ 1.980248] Already setup the GSI :17 [ 1.984245] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.992318] ehci_hcd 0000:00:13.2: enabling bus mastering [ 1.992323] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.998491] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.002481] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM [ 2.002481] ehci_hcd 0000:00:13.2: debug port 1 [ 2.002481] ehci_hcd 0000:00:13.2: enabling Mem-Wr-Inval [ 2.002481] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf98ff800 [ 2.032188] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.037984] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.041968] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.041968] usb usb2: Product: EHCI Host Controller [ 2.041968] usb usb2: Manufacturer: Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ehci_hcd [ 2.041968] usb usb2: SerialNumber: 0000:00:13.2 [ 2.067794] usb usb2: configuration #1 chosen from 1 choice [ 2.074068] hub 2-0:1.0: USB hub found [ 2.080247] hub 2-0:1.0: 5 ports detected [ 2.086521] xen: registering gsi 17 triggering 0 polarity 1 [ 2.086523] xen_allocate_pirq: returning irq 17 for gsi 17 [ 2.090434] xen: --> irq=17 [ 2.092725] Already setup the GSI :17 [ 2.096723] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.105034] ehci_hcd 0000:00:16.2: enabling bus mastering [ 2.105039] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 2.111366] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.116144] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.116173] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.117597] ata1.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133 [ 2.117600] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.119164] ata1.00: configured for UDMA/133 [ 2.122624] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01110, max UDMA7 [ 2.122626] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.129094] ata3.00: configured for UDMA/133 [ 2.132476] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5 [ 2.132952] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 2.132957] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.133007] sd 0:0:0:0: [sda] Write Protect is off [ 2.133009] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.133038] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.144229] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 2.144636] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.144690] sd 2:0:0:0: [sdb] Write Protect is off [ 2.144692] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.144722] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.148581] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.115355] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM [ 2.115355] ehci_hcd 0000:00:16.2: debug port 1 [ 2.115355] ehci_hcd 0000:00:16.2: enabling Mem-Wr-Inval [ 2.115355] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf98ffc00 [ 2.245236] sda: [ 2.245313] sdb: sda1 sda2 [ 2.257222] sdb1 [ 2.263183] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.263713] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.263748] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.280869] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.284854] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.284854] usb usb3: Product: EHCI Host Controller [ 2.284854] usb usb3: Manufacturer: Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ehci_hcd [ 2.284854] usb usb3: SerialNumber: 0000:00:16.2 [ 2.310357] usb usb3: configuration #1 chosen from 1 choice [ 2.316461] hub 3-0:1.0: USB hub found [ 2.322363] hub 3-0:1.0: 4 ports detected [ 2.328472] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.334443] xen: registering gsi 18 triggering 0 polarity 1 [ 2.334448] alloc irq_desc for 18 on node 0 [ 2.334450] alloc kstat_irqs on node 0 [ 2.334453] xen: --> irq=18 [ 2.334485] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.340486] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.346599] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 2.352643] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf98fb000 [ 2.416253] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.420203] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.420203] usb usb4: Product: OHCI Host Controller [ 2.420203] usb usb4: Manufacturer: Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ohci_hcd [ 2.420203] usb usb4: SerialNumber: 0000:00:12.0 [ 2.453906] usb usb4: configuration #1 chosen from 1 choice [ 2.460164] hub 4-0:1.0: USB hub found [ 2.466254] hub 4-0:1.0: 5 ports detected [ 2.472286] xen: registering gsi 18 triggering 0 polarity 1 [ 2.472288] xen_allocate_pirq: returning irq 18 for gsi 18 [ 2.476235] xen: --> irq=18 [ 2.478246] Already setup the GSI :18 [ 2.482243] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.490134] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.496252] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 2.500247] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf98fc000 [ 2.568249] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.572190] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.572190] usb usb5: Product: OHCI Host Controller [ 2.572190] usb usb5: Manufacturer: Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ohci_hcd [ 2.572190] usb usb5: SerialNumber: 0000:00:13.0 [ 2.603347] usb usb5: configuration #1 chosen from 1 choice [ 2.609657] hub 5-0:1.0: USB hub found [ 2.615796] hub 5-0:1.0: 5 ports detected [ 2.621876] xen: registering gsi 18 triggering 0 polarity 1 [ 2.621878] xen_allocate_pirq: returning irq 18 for gsi 18 [ 2.625794] xen: --> irq=18 [ 2.627885] Already setup the GSI :18 [ 2.631882] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.639977] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.646108] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 2.650101] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf98fd000 [ 2.716341] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.720221] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.720221] usb usb6: Product: OHCI Host Controller [ 2.720221] usb usb6: Manufacturer: Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ohci_hcd [ 2.720221] usb usb6: SerialNumber: 0000:00:14.5 [ 2.753489] usb usb6: configuration #1 chosen from 1 choice [ 2.759455] hub 6-0:1.0: USB hub found [ 2.765289] hub 6-0:1.0: 2 ports detected [ 2.771071] xen: registering gsi 18 triggering 0 polarity 1 [ 2.771073] xen_allocate_pirq: returning irq 18 for gsi 18 [ 2.774993] xen: --> irq=18 [ 2.776747] Already setup the GSI :18 [ 2.780745] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.788206] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 2.794135] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 2.798129] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf98fe000 [ 2.864241] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.868227] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.868227] usb usb7: Product: OHCI Host Controller [ 2.868227] usb usb7: Manufacturer: Linux 2.6.32.35-xen-next-2.6.32.x-20110325 ohci_hcd [ 2.868227] usb usb7: SerialNumber: 0000:00:16.0 [ 2.899925] usb usb7: configuration #1 chosen from 1 choice [ 2.906083] hub 7-0:1.0: USB hub found [ 2.912123] hub 7-0:1.0: 4 ports detected [ 2.918172] uhci_hcd: USB Universal Host Controller Interface driver [ 2.924476] usbcore: registered new interface driver usblp [ 2.928471] Initializing USB Mass Storage driver... [ 2.936540] usbcore: registered new interface driver usb-storage [ 2.940535] USB Mass Storage support registered. [ 2.948644] usbcore: registered new interface driver libusual [ 2.954978] PNP: No PS/2 controller found. Probing ports directly. [ 2.961623] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.965475] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.974063] mice: PS/2 mouse device common for all mice [ 2.980567] rtc_cmos 00:04: RTC can wake from S4 [ 2.986887] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.992944] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 3.000118] applesmc: supported laptop not found! [ 3.004111] applesmc: driver init failed (ret=-19)! [ 3.012343] f71805f: Unsupported Fintek device, skipping [ 3.018318] f71882fg: Unsupported Fintek device [ 3.024601] hdaps: supported laptop not found! [ 3.028594] hdaps: driver init failed (ret=-19)! [ 3.036746] lis3lv02d driver loaded. [ 3.043546] pc87360: PC8736x not detected, module not inserted. [ 3.050249] wdt: Xen WatchDog Timer Driver v0.01 [ 3.056404] wdt: initialized (timeout=60s, nowayout=0) [ 3.062817] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 3.069190] device-mapper: multipath: version 1.1.0 loaded [ 3.073181] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.081550] cpuidle: using governor ladder [ 3.085532] cpuidle: using governor menu [ 3.095191] usbcore: registered new interface driver hiddev [ 3.101109] usbcore: registered new interface driver usbhid [ 3.105104] usbhid: v2.6:USB HID core driver [ 3.112683] Netfilter messages via NETLINK v0.30. [ 3.112698] nf_conntrack version 0.5.0 (6144 buckets, 24576 max) [ 3.113026] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 3.113028] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 3.113029] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 3.113054] ctnetlink v0.93: registering with nfnetlink. [ 3.113166] xt_time: kernel timezone is -0000 [ 3.113230] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.113261] TCP cubic registered [ 3.113262] Initializing XFRM netlink socket [ 3.113752] NET: Registered protocol family 10 [ 3.114099] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.114117] IPv6 over IPv4 tunneling driver [ 3.114436] NET: Registered protocol family 17 [ 3.114455] Bridge firewalling registered [ 3.114460] Ebtables v2.0 registered [ 3.114492] ebt_ulog: out of memory trying to call netlink_kernel_create [ 3.211081] powernow-k8: Found 1 AMD Phenom(tm) II X6 1090T Processor processors (6 cpu cores) (version 2.20.00) [ 3.217023] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 3.217024] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 3.230848] Freeing unused kernel memory: 796k freed [ 4.084407] EXT4-fs (dm-0): Ignoring delalloc option - requested data journaling mode [ 4.092776] EXT4-fs (dm-0): mounted filesystem with journalled data mode [ 5.443524] udev[2144]: starting version 164 [ 6.284569] ata1.00: configured for UDMA/133 [ 6.288464] ata1: EH complete [ 6.703790] ata1.00: configured for UDMA/133 [ 6.707752] ata1: EH complete [ 7.285316] EXT4-fs (dm-0): warning: maximal mount count reached, running e2fsck is recommended [ 7.500843] f71882fg: Found f71889ed chip at 0x600, revision 16 [ 7.509651] ACPI: I/O resource f71882fg [0x600-0x607] conflicts with ACPI region HMOR [0x605-0x606] [ 7.513254] ACPI: This conflict may cause random problems and system instability [ 7.513254] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.534164] f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode [ 7.537882] f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode [ 7.537882] f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode [ 9.169468] Adding 2097144k swap on /dev/mapper/serveerstertje-swap. Priority:-1 extents:1 across:2097144k [ 10.276723] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 11.351732] r8169: eth1: link up [ 11.355745] r8169: eth1: link up [ 11.579446] r8169: eth0: link up [ 11.580783] r8169: eth0: link up [ 12.232657] eth1: IPv6 duplicate address fe80::4261:86ff:fef4:67d8 detected! [ 22.177504] xen_bridge: no IPv6 routers present [ 22.281523] eth0: no IPv6 routers present [ 24.510636] FW: New not syn:IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.34.193 DST=88.159.88.171 LEN=49 TOS=0x00 PREC=0x00 TTL=115 ID=19312 DF PROTO=TCP SPT=1863 DPT=50589 WINDOW=3891 RES=0x00 ACK PSH URGP=0 [ 24.511891] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.34.193 DST=88.159.88.171 LEN=40 TOS=0x00 PREC=0x00 TTL=115 ID=19323 DF PROTO=TCP SPT=1863 DPT=50589 WINDOW=3891 RES=0x00 ACK FIN URGP=0 [ 24.916114] vpn_bridge: no IPv6 routers present [ 25.181208] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.34.193 DST=88.159.88.171 LEN=49 TOS=0x00 PREC=0x00 TTL=115 ID=21480 DF PROTO=TCP SPT=1863 DPT=50589 WINDOW=3891 RES=0x00 ACK PSH FIN URGP=0 [ 26.070505] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.34.193 DST=88.159.88.171 LEN=49 TOS=0x00 PREC=0x00 TTL=115 ID=25241 DF PROTO=TCP SPT=1863 DPT=50589 WINDOW=3891 RES=0x00 ACK PSH FIN URGP=0 [ 26.631979] EXT4-fs (dm-2): mounted filesystem with ordered data mode [ 27.064941] EXT4-fs (dm-3): mounted filesystem with ordered data mode [ 27.483840] EXT4-fs (dm-4): mounted filesystem with ordered data mode [ 27.771000] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.34.193 DST=88.159.88.171 LEN=49 TOS=0x00 PREC=0x00 TTL=115 ID=31222 DF PROTO=TCP SPT=1863 DPT=50589 WINDOW=3891 RES=0x00 ACK PSH FIN URGP=0 [ 27.824340] EXT4-fs (dm-5): mounted filesystem with ordered data mode [ 28.071002] EXT4-fs (dm-6): mounted filesystem with ordered data mode [ 28.674878] EXT4-fs (dm-9): mounted filesystem with ordered data mode [ 28.814961] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 31.078493] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.34.193 DST=88.159.88.171 LEN=49 TOS=0x00 PREC=0x00 TTL=115 ID=9036 DF PROTO=TCP SPT=1863 DPT=50589 WINDOW=3891 RES=0x00 ACK PSH FIN URGP=0 [ 33.851149] alloc irq_desc for 1747 on node -1 [ 33.851154] alloc kstat_irqs on node -1 [ 33.851211] alloc irq_desc for 1746 on node -1 [ 33.851213] alloc kstat_irqs on node -1 [ 33.851602] XENBUS: Unable to read cpu state [ 33.864025] XENBUS: Unable to read cpu state [ 33.876212] XENBUS: Unable to read cpu state [ 33.888216] XENBUS: Unable to read cpu state [ 33.899943] XENBUS: Unable to read cpu state [ 33.911571] XENBUS: Unable to read cpu state [ 34.271461] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=193.99.144.87 DST=88.159.88.171 LEN=52 TOS=0x00 PREC=0x00 TTL=54 ID=0 DF PROTO=TCP SPT=80 DPT=50825 WINDOW=5840 RES=0x00 ACK SYN URGP=0 [ 37.677504] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.34.193 DST=88.159.88.171 LEN=49 TOS=0x00 PREC=0x00 TTL=115 ID=32461 DF PROTO=TCP SPT=1863 DPT=50589 WINDOW=3891 RES=0x00 ACK PSH FIN URGP=0 [ 40.435762] FW: BLOCKED low tcp input: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=78.167.72.125 DST=88.159.88.171 LEN=60 TOS=0x00 PREC=0x00 TTL=53 ID=13867 DF PROTO=TCP SPT=4630 DPT=23 WINDOW=5808 RES=0x00 SYN URGP=0 [ 50.875759] FW: INVALID IP PACKET: IN=eth0 OUT= MAC=40:61:86:f4:67:d9:00:08:ae:10:46:60:08:00 SRC=64.4.34.193 DST=88.159.88.171 LEN=40 TOS=0x00 PREC=0x00 TTL=115 ID=12111 DF PROTO=TCP SPT=1863 DPT=50589 WINDOW=0 RES=0x00 ACK RST URGP=0