Linux version 2.6.39-rc6-x86_64.xenU.all.r0+ (root@dte40r0-um-i386) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Wed May 4 19:32:40 CEST 2011 Command line: root=/dev/xvda noapic nolapic softdog.nowayout=1 softdog.soft_margin=180 tmem console=hvc0 ACPI in unprivileged domain disabled released 0 pages of unused memory Set 0 page(s) to 1-1 mapping. BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000000000a0000 (usable) Xen: 00000000000a0000 - 0000000000100000 (reserved) Xen: 0000000000100000 - 0000000080000000 (usable) Xen: 0000000100000000 - 0000000100800000 (usable) NX (Execute Disable) protection: active DMI not present or invalid. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x100800 max_arch_pfn = 0x400000000 last_pfn = 0x80000 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 01693000 Base memory trampoline at [ffff88000009e000] 9e000 size 8192 init_memory_mapping: 0000000000000000-0000000080000000 0000000000 - 0080000000 page 4k kernel direct mapping tables up to 80000000 @ 7fbfd000-80000000 init_memory_mapping: 0000000100000000-0000000100800000 0100000000 - 0100800000 page 4k kernel direct mapping tables up to 100800000 @ 7f3f3000-7fbfd000 xen: setting RW the range 7ffec000 - 80000000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100800 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x000000a0 0: 0x00000100 -> 0x00080000 0: 0x00100000 -> 0x00100800 On node 0 totalpages: 526224 DMA zone: 56 pages used for memmap DMA zone: 2 pages reserved DMA zone: 3926 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 505912 pages, LIFO batch:31 Normal zone: 28 pages used for memmap Normal zone: 2020 pages, LIFO batch:0 xen: setting RW the range 7f3f8000 - 7fbfd000 SMP: Allowing 4 CPUs, 0 hotplug CPUs No local APIC present APIC: disable apic facility APIC: switched to apic NOOP nr_irqs_gsi: 16 Allocating PCI resources starting at 80000000 (gap: 80000000:80000000) Booting paravirtualized kernel on Xen Xen version: 4.1.1-rc1-pre (preserve-AD) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 27 pages/cpu @ffff88007fb45000 s78592 r8192 d23808 u110592 pcpu-alloc: s78592 r8192 d23808 u110592 alloc=27*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511858 Kernel command line: root=/dev/xvda noapic nolapic softdog.nowayout=1 softdog.soft_margin=180 tmem console=hvc0 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... No AGP bridge found Memory: 1982568k/4202496k available (3016k kernel code, 2097600k absent, 122328k reserved, 1580k data, 476k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. CONFIG_RCU_FANOUT set to non-default value of 32 RCU-based detection of stalled CPUs is disabled. NR_IRQS:384 Console: colour dummy device 80x25 console [tty0] enabled console [hvc0] enabled Xen: using vcpuop timer interface installing Xen timer for CPU 0 Detected 2666.856 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.71 BogoMIPS (lpj=26668560) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code cpu 0 spinlock event irq 17 Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only. installing Xen timer for CPU 1 cpu 1 spinlock event irq 23 SMP alternatives: switching to SMP code installing Xen timer for CPU 2 cpu 2 spinlock event irq 29 installing Xen timer for CPU 3 cpu 3 spinlock event irq 35 Brought up 4 CPUs Grant table initialized NET: Registered protocol family 16 PCI: setting up Xen PCI frontend stub PCI: pci_cache_line_size set to 64 bytes bio: create slab at 0 ACPI: Interpreter disabled. xen/balloon: Initialising balloon driver. last_pfn = 0x100800 max_arch_pfn = 0x400000000 xen-balloon: Initialising balloon driver. vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. PCI: System does not support PCI PCI: System does not support PCI Switching to clocksource xen pnp: PnP ACPI: disabled Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #2 Switched to NOHz mode on CPU #3 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 1024 (order: 3, 32768 bytes) UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) NET: Registered protocol family 1 PCI: CLS 0 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880079000000 - ffff88007d000000 software IO TLB at phys 0x79000000 - 0x7d000000 platform rtc_cmos: registered platform RTC device (no PNP device found) HugeTLB registered 2 MB page size, pre-allocated 0 pages NTFS driver 2.1.30 [Flags: R/W]. msgmni has been set to 3872 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered Event-channel device installed. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled loop: module loaded e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI e1000: Copyright (c) 1999-2006 Intel Corporation. Initialising Xen virtual ethernet driver. blkfront: xvda: barriers enabled xvda: Setting capacity to 209715200 xvda: detected capacity change from 0 to 107374182400 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky blkfront: xvdb: barriers enabled i8042: PNP: No PS/2 controller found. Probing ports directly. i8042: No controller found mousedev: PS/2 mouse device common for all mice xvdb: unknown partition table Setting capacity to 2097152 xvdb: detected capacity change from 0 to 1073741824 rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc_cmos: probe of rtc_cmos failed with error -38 Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=180 sec soft_panic=0 (nowayout= 1) cpuidle: using governor ladder cpuidle: using governor menu Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. xt_time: kernel timezone is -0000 ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 XENBUS: Device with no driver: device/console/0 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) REISERFS (device xvda): found reiserfs format "3.6" with standard journal REISERFS (device xvda): using ordered data mode REISERFS (device xvda): journal params: device xvda, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device xvda): checking transaction log (xvda) REISERFS (device xvda): Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) on device 202:0. Freeing unused kernel memory: 476k freed udevd (520): /proc/520/oom_adj is deprecated, please use /proc/520/oom_score_adj instead. ioctl32(fgconsole:774): Unknown cmd fd(3) cmd(00005603){t:'V';sz:0} arg(ffbbd53e) on /dev/console Adding 1048572k swap on /dev/xvdb. Priority:-1 extents:1 across:1048572k SS blkfront: xvda: empty write barrier op failed blkfront: xvda: barriers disabled ioctl32(fgconsole:1046): Unknown cmd fd(3) cmd(00005603){t:'V';sz:0} arg(ffe8c38e) on /dev/console