|   | 
      | 
  
  
      | 
      | 
  
 
     | 
    | 
  
  
     | 
    | 
  
  
    |   | 
      | 
  
  
    | 
         
xen-users
[Xen-users] XCP - VLAN Issues
 
I have an issue with VLANs that was in XCP 1.0.0 and also persisted after the upgrade to XCP 1.1.beta  Currently the server has 2 network cards:
  00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 05) 
02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
  eth0 is the designated as the management interface and is connected to a port on VLAN 193 eth1 is the interface used by the VM's and is connected to a trunked switch port to provide VLAN access to the VM's 
 Before moving eth1 to a trunked port without vlanning I could ping it's ip address and ssh to it.  After moving it to the trunked port I have no connectivity to it whatsoever.  The only way I can get a response from it is to ping the static IP on the local machine.  The VM's are using the interface on the created VLANS almost perfectly however they sometimes exhibit strange behaviour such as loss of connectivity when connecting to another machine crossing over a vlan. 
 I setup my vlans using the XenServer guide here is the output of pif-list:
  **********************************************************************************  xe pif-list uuid ( RO)                  : 3ebae448-8520-1d92-32b8-322be6018909 
                device ( RO): eth0     currently-attached ( RO): true                   VLAN ( RO): -1           network-uuid ( RO): 0eb1efb3-60c4-f754-ccee-607ea7419524
 
  uuid ( RO)                  : 32ab2f2a-601e-766e-d71b-9ca1d7e6339f 
                device ( RO): eth1     currently-attached ( RO): true                   VLAN ( RO): 200           network-uuid ( RO): cef0cc98-274d-102f-4441-7327c888dcd2
 
  uuid ( RO)                  : d14427c2-4940-0db1-7d96-f55434af319e 
                device ( RO): eth1     currently-attached ( RO): true                   VLAN ( RO): 201           network-uuid ( RO): 85a9aba5-73ea-4008-0a28-395c96be30fd
 
  uuid ( RO)                  : e602777f-b4e9-e231-7858-81189c47c434 
                device ( RO): eth1     currently-attached ( RO): true                   VLAN ( RO): -1           network-uuid ( RO): df87728a-e4a7-a16e-9f8c-c4c4c26dc35f
 
  uuid ( RO)                  : 753ee4aa-d286-b66b-d0c0-8c212ac0cca5 
                device ( RO): eth1     currently-attached ( RO): true                   VLAN ( RO): 193           network-uuid ( RO): 7abbb9eb-2507-9a16-c547-2f3dd02bc1d9
 
  uuid ( RO)                  : 2fa498da-1749-2822-b194-bf2890491533 
                device ( RO): eth1     currently-attached ( RO): true                   VLAN ( RO): 194           network-uuid ( RO): 54a0217e-e659-8fc6-7a5c-fef685fe9d7a
 
  uuid ( RO)                  : b80d7974-cc00-9db4-213e-e1df3a51f2a8 
                device ( RO): eth1     currently-attached ( RO): true                   VLAN ( RO): 207           network-uuid ( RO): 0af4cb48-83e4-b417-cb5d-9df528dd587a
 
  uuid ( RO)                  : 2934f6a4-1d80-ad36-96a4-5962f669c4f9 
                device ( RO): eth1     currently-attached ( RO): true                   VLAN ( RO): 795           network-uuid ( RO): 2ce5fe35-ea10-e1a7-c9e3-4f5bfd5c55ab ********************************************************************************* 
 I suspected that the issue may lie here:
  ************************************************************************************ uuid ( RO)                  : e602777f-b4e9-e231-7858-81189c47c434 
                device ( RO): eth1 
    currently-attached ( RO): true 
                  VLAN ( RO): -1 
          network-uuid ( RO): df87728a-e4a7-a16e-9f8c-c4c4c26dc35f ************************************************************************************
  where the eth1 interface is assigned a VLAN value of -1 when it should be on the 201 network.  When I try to do  
 xe pif-param-set uuid=e602777f-b4e9-e231-7858-81189c47c434 VLAN=201
  I get:
  Error: Field 'VLAN' is read-only.
  How can I assign the interface to the correct VLAN so I can use it again for traffic to the server? 
  
 
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users 
 |   
 
| <Prev in Thread] | 
Current Thread | 
[Next in Thread> |  
- [Xen-users] XCP - VLAN Issues,
Ronny Bull <=
  
 |  
  
 | 
    | 
  
  
    |   | 
    |