WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] Debian Squeeze hangs with kernel 2.6.32-5-xen-686

To: Xen-Users <xen-users@xxxxxxxxxxxxxxxxxxx>
Subject: [Xen-users] Debian Squeeze hangs with kernel 2.6.32-5-xen-686
From: Daniel Bareiro <daniel-listas@xxxxxxx>
Date: Thu, 14 Apr 2011 17:19:59 -0300
Delivery-date: Thu, 14 Apr 2011 13:21:45 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <20110410142349.GB10576@xxxxxxxxxxxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <20110410142349.GB10576@xxxxxxxxxxxxxxxxxxxx>
Reply-to: dbareiro@xxxxxxx
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mutt/1.5.18 (2008-05-17)
Hi all!

After upgrading to Squeeze, I am watching a Xen VMHost that after a
while it hangs. This did not happen when I was using Xen with Debian
Lenny (in this case as with Squeeze, the Xen components are from Debian
repositories).

In each case I connected a keyboard and monitor to the computer and the
screen remained black without answering any key.

This problem seems to also affect domUs, because one of them is a DHCP
server and hosts that are configured through it lost their connectivity.

Below I copy the output of dmesg after boot if this can provide some
more information to the problem.

----------------------------------------------------------------------
[    0.000000] Reserving virtual address space above 0xf5800000
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-31) 
(ben@xxxxxxxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Mar 9
 01:27:54 UTC 2011
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] released 0 pages of unused memory
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  Xen: 000000000009fc00 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 0000000075fe1000 (usable)
[    0.000000]  Xen: 000000007f7b0000 - 000000007f7be000 (ACPI data)
[    0.000000]  Xen: 000000007f7be000 - 000000007f7e0000 (ACPI NVS)
[    0.000000]  Xen: 000000007f7e0000 - 000000007f800000 (reserved)
[    0.000000]  Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  Xen: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  Xen: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.3 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) 
==> (reserved)
[    0.000000] last_pfn = 0x75fe1 max_arch_pfn = 0x1000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 037ff000
[    0.000000] init_memory_mapping: 0000000000000000-000000002cffe000
[    0.000000] NX (Execute Disable) protection: active
[    0.000000]  0000000000 - 002cffe000 page 4k
[    0.000000] kernel direct mapping tables up to 2cffe000 @ 100000-26d000
[    0.000000] RAMDISK: 01651000 - 02d08200
[    0.000000] ACPI: RSDP 000fac60 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 7f7b0100 0003C (v01 A M I  OEMXSDT  11000509 MSFT 
00000097)
[    0.000000] ACPI: FACP 7f7b0290 000F4 (v03 A M I  OEMFACP  11000509 MSFT 
00000097)
[    0.000000] ACPI: DSDT 7f7b03f0 046FE (v01  A0347 A0347001 00000001 INTL 
02002026)
[    0.000000] ACPI: FACS 7f7be000 00040
[    0.000000] ACPI: APIC 7f7b0390 0005C (v01 A M I  OEMAPIC  11000509 MSFT 
00000097)
[    0.000000] ACPI: OEMB 7f7be040 00046 (v01 A M I  AMI_OEM  11000509 MSFT 
00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1167MB HIGHMEM available.
[    0.000000] 719MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 2cffe000
[    0.000000]   low ram: 0 - 2cffe000
[    0.000000]   node 0 low ram: 00000000 - 2cffe000
[    0.000000]   node 0 bootmap 00010000 - 00015a00
[    0.000000] (10 early reservations) ==> bootmem [0000000000 - 002cffe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 
- 0000001000]
[    0.000000]   #1 [0002ee2000 - 0002eff000]   XEN PAGETABLES ==> [0002ee2000 
- 0002eff000]
[    0.000000]   #2 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 
- 0000002000]
[    0.000000]   #3 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 
- 0000007000]
[    0.000000]   #4 [0001000000 - 000152b8f4]    TEXT DATA BSS ==> [0001000000 
- 000152b8f4]
[    0.000000]   #5 [0001651000 - 0002d08200]          RAMDISK ==> [0001651000 
- 0002d08200]
[    0.000000]   #6 [0002d09000 - 0002ee2000]   XEN START INFO ==> [0002d09000 
- 0002ee2000]
[    0.000000]   #7 [000152c000 - 000152c21c]              BRK ==> [000152c000 
- 000152c21c]
[    0.000000]   #8 [0000100000 - 000024f000]          PGTABLE ==> [0000100000 
- 000024f000]
[    0.000000]   #9 [0000010000 - 0000016000]          BOOTMAP ==> [0000010000 
- 0000016000]
[    0.000000] found SMP MP-table at [c00ff780] ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0002cffe
[    0.000000]   HighMem  0x0002cffe -> 0x00075fe1
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x00075fe1
[    0.000000] On node 0 totalpages: 483184
[    0.000000] free_area_init_node: node 0, pgdat c13f4d00, node_mem_map 
c2eff200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1408 pages used for memmap
[    0.000000]   Normal zone: 178814 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2336 pages used for memmap
[    0.000000]   HighMem zone: 296643 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-0
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 256
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 7f800000 (gap: 
7f800000:60800000)
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 15 pages/cpu @c3dcb000 s37688 r0 d23752 u65536
[    0.000000] pcpu-alloc: s37688 r0 d23752 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] trying to map vcpu_info 0 at c3dcc010, mfn 3bdcc, offset 16
[    0.000000] cpu 0 using vcpu_info at c3dcc010
[    0.000000] Xen: using vcpu_info placement
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 479408
[    0.000000] Kernel command line: placeholder 
root=UUID=213f474a-b67c-45f7-832f-91c9471e5871 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] DMA: Placing 64MB software IO TLB between c3e9f000 - c7e9f000
[    0.000000] DMA: software IO TLB at phys 0x3e9f000 - 0x7e9f000
[    0.000000] xen_swiotlb_fixup: buf=c3e9f000 size=67108864
[    0.000000] xen_swiotlb_fixup: buf=c7eff000 size=32768
[    0.000000] Initializing HighMem for node 0 (0002cffe:00075fe1)
[    0.000000] Memory: 1817812k/1933188k available (2635k kernel code, 113884k 
reserved, 1455k data, 404k init, 1195916k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xf5556000 - 0xf57ff000   (2724 kB)
[    0.000000]     pkmap   : 0xf5000000 - 0xf5200000   (2048 kB)
[    0.000000]     vmalloc : 0xed7fe000 - 0xf4ffe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xecffe000   ( 719 MB)
[    0.000000]       .init : 0xc13ff000 - 0xc1464000   ( 404 kB)
[    0.000000]       .data : 0xc1292d81 - 0xc13feb18   (1455 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1292d81   (2635 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, 
Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:1536
[    0.000000] xen: --> irq=0
[    0.000000] xen: --> irq=1
[    0.000000] xen: --> irq=2
[    0.000000] xen: --> irq=3
[    0.000000] xen: --> irq=4
[    0.000000] xen: --> irq=5
[    0.000000] xen: --> irq=6
[    0.000000] xen: --> irq=7
[    0.000000] xen: --> irq=8
[    0.000000] xen: --> irq=9
[    0.000000] xen: --> irq=10
[    0.000000] xen: --> irq=11
[    0.000000] xen: --> irq=12
[    0.000000] xen: --> irq=13
[    0.000000] xen: --> irq=14
[    0.000000] xen: --> irq=15
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=3
[    0.000000] xen: registering gsi 9 triggering 0 polarity 1
[    0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[    0.000000] xen: --> irq=9
[    0.000000] xen: acpi sci 9
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Xen: using vcpuop timer interface
[    0.000000] installing Xen timer for CPU 0
[    0.000000] Detected 2200.196 MHz processor.
[    0.004000] Calibrating delay loop (skipped), value calculated using timer 
frequency.. 4400.39 BogoMIPS (lpj=8800784)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys devices
[    0.004000] Initializing cgroup subsys freezer
[    0.004000] Initializing cgroup subsys net_cls
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.004000] mce: CPU supports 5 MCE banks
[    0.004000] Performance Events: AMD PMU driver.
[    0.004000] ------------[ cut here ]------------
[    0.004000] WARNING: at 
/build/buildd-linux-2.6_2.6.32-31-i386-qYaaJr/linux-2.6-2.6.32/debian/build/source_i386_xen/arch/x86/xen/enlighten.c:726
 perf_events_lapic_init+0x28/0x29()
[    0.004000] Hardware name: System Product Name
[    0.004000] Modules linked in:
[    0.004000] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-686 #1
[    0.004000] Call Trace:
[    0.004000]  [<c1037799>] ? warn_slowpath_common+0x5e/0x8a
[    0.004000]  [<c10377cf>] ? warn_slowpath_null+0xa/0xc
[    0.004000]  [<c1011cdc>] ? perf_events_lapic_init+0x28/0x29
[    0.004000]  [<c14073d9>] ? init_hw_perf_events+0x2dd/0x376
[    0.004000]  [<c140702c>] ? check_bugs+0x8/0xd8
[    0.004000]  [<c13ff808>] ? start_kernel+0x309/0x31d
[    0.004000]  [<c1401410>] ? xen_start_kernel+0x564/0x56b
[    0.004000]  [<c1409046>] ? mtrr_cleanup+0x341/0x3eb
[    0.004000] ---[ end trace a7919e7f17c0a725 ]---
[    0.004000] ... version:                0
[    0.004000] ... bit width:              48
[    0.004000] ... generic registers:      4
[    0.004000] ... value mask:             0000ffffffffffff
[    0.004000] ... max period:             00007fffffffffff
[    0.004000] ... fixed-purpose events:   0
[    0.004000] ... event mask:             000000000000000f
[    0.004000] SMP alternatives: switching to UP code
[    0.004000] Freeing SMP alternatives: 14k freed
[    0.004000] ACPI: Core revision 20090903
[    0.012300] Brought up 1 CPUs
[    0.012311] CPU0 attaching NULL sched-domain.
[    0.012449] devtmpfs: initialized
[    0.013020] Grant table initialized
[    0.013023] regulator: core version 0.5
[    0.013093] NET: Registered protocol family 16
[    0.013288] ACPI: bus type pci registered
[    0.013313] sync cpu 0 get result 1 max_id 0
[    0.014149] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[    0.014153] PCI: Using configuration type 1 for base access
[    0.014788] bio: create slab <bio-0> at 0
[    0.016507] ERROR: Unable to locate IOAPIC for GSI 9
[    0.016574] ACPI: EC: Look up EC in DSDT
[    0.022119] ACPI: Executed 1 blocks of module-level executable AML code
[    0.030087] ACPI: Interpreter enabled
[    0.030092] ACPI: (supports S0 S1 S3 S4 S5)
[    0.030146] ACPI: Using IOAPIC for interrupt routing
[    0.044949] ACPI Warning: Incorrect checksum in table [OEMB] - 28, should be 
23 (20090903/tbutils-314)
[    0.045249] ACPI: No dock devices found.
[    0.045412] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.045495] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xfa000000-0xfbffffff]
[    0.046203] pci 0000:00:01.0: supports D1
[    0.046312] pci 0000:00:0f.0: reg 10 io port: [0xec00-0xec07]
[    0.046325] pci 0000:00:0f.0: reg 14 io port: [0xe880-0xe883]
[    0.046338] pci 0000:00:0f.0: reg 18 io port: [0xe800-0xe807]
[    0.046350] pci 0000:00:0f.0: reg 1c io port: [0xe480-0xe483]
[    0.046363] pci 0000:00:0f.0: reg 20 io port: [0xe400-0xe40f]
[    0.046376] pci 0000:00:0f.0: reg 24 32bit mmio: [0xfebffc00-0xfebfffff]
[    0.046433] pci 0000:00:0f.0: PME# supported from D3hot
[    0.046441] pci 0000:00:0f.0: PME# disabled
[    0.046541] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[    0.046705] pci 0000:00:10.0: reg 20 io port: [0xe080-0xe09f]
[    0.046757] pci 0000:00:10.0: supports D1 D2
[    0.046761] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.046768] pci 0000:00:10.0: PME# disabled
[    0.046864] pci 0000:00:10.1: reg 20 io port: [0xe000-0xe01f]
[    0.046917] pci 0000:00:10.1: supports D1 D2
[    0.046921] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.046928] pci 0000:00:10.1: PME# disabled
[    0.047025] pci 0000:00:10.2: reg 20 io port: [0xdc00-0xdc1f]
[    0.047077] pci 0000:00:10.2: supports D1 D2
[    0.047080] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.047088] pci 0000:00:10.2: PME# disabled
[    0.047184] pci 0000:00:10.3: reg 20 io port: [0xd880-0xd89f]
[    0.047237] pci 0000:00:10.3: supports D1 D2
[    0.047240] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.047248] pci 0000:00:10.3: PME# disabled
[    0.047324] pci 0000:00:10.4: reg 10 32bit mmio: [0xfebff800-0xfebff8ff]
[    0.047420] pci 0000:00:10.4: supports D1 D2
[    0.047423] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.047431] pci 0000:00:10.4: PME# disabled
[    0.047662] pci 0000:00:11.5: reg 10 io port: [0xd400-0xd4ff]
[    0.047750] pci 0000:00:11.5: supports D1 D2
[    0.047931] pci 0000:00:12.0: reg 10 io port: [0xd000-0xd0ff]
[    0.047944] pci 0000:00:12.0: reg 14 32bit mmio: [0xfebff400-0xfebff4ff]
[    0.048027] pci 0000:00:12.0: supports D1 D2
[    0.048030] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.048038] pci 0000:00:12.0: PME# disabled
[    0.048545] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf4000000-0xf7ffffff]
[    0.048556] pci 0000:01:00.0: reg 14 32bit mmio: [0xfd000000-0xfdffffff]
[    0.048596] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfeaf0000-0xfeafffff]
[    0.048634] pci 0000:01:00.0: supports D1 D2
[    0.048731] pci 0000:00:01.0: bridge 32bit mmio: [0xfca00000-0xfeafffff]
[    0.048739] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0900000-0xf88fffff]
[    0.048848] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.048856] pci 0000:02:00.0: PME# disabled
[    0.048972] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[    0.048980] pci 0000:02:00.1: PME# disabled
[    0.049023] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You 
can enable it with 'pcie_aspm=force'
[    0.049444] pci_bus 0000:00: on NUMA node 0
[    0.049450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.049743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.049862] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[    0.049970] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
[    0.050078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
[    0.050179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[    0.085170] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.085325] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.085477] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.085629] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.085780] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) 
*0, disabled.
[    0.085935] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) 
*0, disabled.
[    0.086089] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) 
*0, disabled.
[    0.086244] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) 
*0, disabled.
[    0.086351] xen_balloon: Initialising balloon driver with page order 0.
[    0.086450] vgaarb: device added: 
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.086456] vgaarb: loaded
[    0.086564] PCI: Using ACPI for IRQ routing
[    0.086903] Switching to clocksource xen
[    0.088001] pnp: PnP ACPI init
[    0.088001] ACPI: bus type pnp registered
[    0.088001] xen: registering gsi 8 triggering 1 polarity 0
[    0.088001] xen_allocate_pirq: returning irq 8 for gsi 8
[    0.088001] xen: --> irq=8
[    0.088001] xen: registering gsi 13 triggering 1 polarity 0
[    0.088001] xen_allocate_pirq: returning irq 13 for gsi 13
[    0.088001] xen: --> irq=13
[    0.088001] xen: registering gsi 6 triggering 1 polarity 0
[    0.088001] xen_allocate_pirq: returning irq 6 for gsi 6
[    0.088001] xen: --> irq=6
[    0.088607] xen: registering gsi 7 triggering 1 polarity 0
[    0.088611] xen_allocate_pirq: returning irq 7 for gsi 7
[    0.088614] xen: --> irq=7
[    0.089450] pnp 00:08: mem resource (0xf0000000-0xf7ffffff) overlaps 
0000:00:01.0 BAR 15 (0xf0900000-0xf88fffff), disabling
[    0.089811] xen: registering gsi 1 triggering 1 polarity 0
[    0.089815] xen_allocate_pirq: returning irq 1 for gsi 1
[    0.089818] xen: --> irq=1
[    0.090696] xen: registering gsi 4 triggering 1 polarity 0
[    0.090699] xen_allocate_pirq: returning irq 4 for gsi 4
[    0.090702] xen: --> irq=4
[    0.092458] pnp: PnP ACPI: found 14 devices
[    0.092461] ACPI: ACPI bus type pnp unregistered
[    0.092466] PnPBIOS: Disabled
[    0.092480] system 00:07: ioport range 0x290-0x297 has been reserved
[    0.092490] system 00:08: ioport range 0x3e0-0x3e7 has been reserved
[    0.092495] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.092500] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.092504] system 00:08: ioport range 0x400-0x41f has been reserved
[    0.092510] system 00:08: iomem range 0xff780000-0xffffffff has been reserved
[    0.092520] system 00:09: iomem range 0xfec00000-0xfec00fff could not be 
reserved
[    0.092525] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.092534] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[    0.092543] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    0.092548] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[    0.092554] system 00:0d: iomem range 0x100000-0x7fffffff could not be 
reserved
[    0.096591] PM-Timer failed consistency check  (0x0xffffff) - aborting.
[    0.096655] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.096658] pci 0000:00:01.0:   IO window: disabled
[    0.096668] pci 0000:00:01.0:   MEM window: 0xfca00000-0xfeafffff
[    0.096676] pci 0000:00:01.0:   PREFETCH window: 0xf0900000-0xf88fffff
[    0.096687] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[    0.096691] pci 0000:02:00.0:   IO window: disabled
[    0.096700] pci 0000:02:00.0:   MEM window: disabled
[    0.096706] pci 0000:02:00.0:   PREFETCH window: disabled
[    0.096718] pci 0000:02:00.1: PCI bridge, secondary bus 0000:04
[    0.096721] pci 0000:02:00.1:   IO window: disabled
[    0.096730] pci 0000:02:00.1:   MEM window: disabled
[    0.096736] pci 0000:02:00.1:   PREFETCH window: disabled
[    0.096747] pci 0000:00:13.0: PCI bridge, secondary bus 0000:02
[    0.096750] pci 0000:00:13.0:   IO window: disabled
[    0.096759] pci 0000:00:13.0:   MEM window: disabled
[    0.096765] pci 0000:00:13.0:   PREFETCH window: disabled
[    0.096776] pci 0000:00:13.1: PCI bridge, secondary bus 0000:05
[    0.096779] pci 0000:00:13.1:   IO window: disabled
[    0.096788] pci 0000:00:13.1:   MEM window: disabled
[    0.096795] pci 0000:00:13.1:   PREFETCH window: disabled
[    0.096822] pci 0000:00:01.0: setting latency timer to 64
[    0.096836] pci 0000:00:13.0: setting latency timer to 64
[    0.096855] pci 0000:02:00.0: setting latency timer to 64
[    0.096874] pci 0000:02:00.1: setting latency timer to 64
[    0.096887] pci 0000:00:13.1: setting latency timer to 64
[    0.096894] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.096898] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.096902] pci_bus 0000:01: resource 1 mem: [0xfca00000-0xfeafffff]
[    0.096906] pci_bus 0000:01: resource 2 pref mem [0xf0900000-0xf88fffff]
[    0.096941] NET: Registered protocol family 2
[    0.097027] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.097360] TCP established hash table entries: 131072 (order: 8, 1048576 
bytes)
[    0.098056] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.098430] TCP: Hash tables configured (established 131072 bind 65536)
[    0.098434] TCP reno registered
[    0.098536] NET: Registered protocol family 1
[    0.098553] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.098567] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.098730] pci 0000:01:00.0: Boot video device
[    0.098798] Unpacking initramfs...
[    0.177087] Freeing initrd memory: 23260k freed
[    0.193346] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.193353] DMA: Placing 64MB software IO TLB between c3e9f000 - c7e9f000
[    0.193357] DMA: software IO TLB at phys 0x3e9f000 - 0x7e9f000
[    0.193709] audit: initializing netlink socket (disabled)
[    0.193725] type=2000 audit(1302441508.192:1): initialized
[    0.197184] highmem bounce pool size: 64 pages
[    0.197191] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.199040] VFS: Disk quotas dquot_6.5.2
[    0.199107] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.199210] msgmni has been set to 1262
[    0.199444] alg: No test for stdrng (krng)
[    0.199510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
253)
[    0.199514] io scheduler noop registered
[    0.199517] io scheduler anticipatory registered
[    0.199520] io scheduler deadline registered
[    0.199565] io scheduler cfq registered (default)
[    0.200022] isapnp: Scanning for PnP cards...
[    0.555426] isapnp: No Plug & Play device found
[    0.560248] registering netback
[    0.562247] Linux agpgart interface v0.103
[    0.562315] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204]
[    0.563490] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xfa000000
[    0.563608] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.563757] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.564207] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.564362] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.564366] PNP: PS/2 appears to have AUX port disabled, if this is 
incorrect please boot with i8042.nopnp
[    0.564544] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.564664] mice: PS/2 mouse device common for all mice
[    0.564735] rtc_cmos 00:02: RTC can wake from S4
[    0.564790] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.564838] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.564854] cpuidle: using governor ladder
[    0.564857] cpuidle: using governor menu
[    0.564863] No iBFT detected.
[    0.565194] TCP cubic registered
[    0.565369] NET: Registered protocol family 10
[    0.566108] Mobile IPv6
[    0.566112] NET: Registered protocol family 17
[    0.566129] Using IPI No-Shortcut mode
[    0.566208] PM: Resume from disk failed.
[    0.566222] registered taskstats version 1
[    0.566832] rtc_cmos 00:02: setting system clock to 2011-04-10 13:18:27 UTC 
(1302441507)
[    0.566893] Initalizing network drop monitor service
[    0.566943] Freeing unused kernel memory: 404k freed
[    0.567983] Write protecting the kernel text: 2636k
[    0.568331] Write protecting the kernel read-only data: 968k
[    0.616309] udev[51]: starting version 164
[    1.101966] SCSI subsystem initialized
[    1.135291] usbcore: registered new interface driver usbfs
[    1.135552] usbcore: registered new interface driver hub
[    1.135827] usbcore: registered new device driver usb
[    1.144316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.144359] xen: registering gsi 22 triggering 0 polarity 1
[    1.144376] xen: --> irq=22
[    1.144387] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.144414] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    1.144441] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus 
number 1
[    1.144514] ehci_hcd 0000:00:10.4: debug port 1
[    1.144554] ehci_hcd 0000:00:10.4: irq 22, io mem 0xfebff800
[    1.151455] Floppy drive(s): fd0 is 1.44M
[    1.152340] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    1.152369] libata version 3.00 loaded.
[    1.156062] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    1.156116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.156120] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.156124] usb usb1: Product: EHCI Host Controller
[    1.156127] usb usb1: Manufacturer: Linux 2.6.32-5-xen-686 ehci_hcd
[    1.156130] usb usb1: SerialNumber: 0000:00:10.4
[    1.156337] usb usb1: configuration #1 chosen from 1 choice
[    1.156464] hub 1-0:1.0: USB hub found
[    1.156498] hub 1-0:1.0: 8 ports detected
[    1.157908] xen: registering gsi 23 triggering 0 polarity 1
[    1.157927] xen: --> irq=23
[    1.157938] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 
23
[    1.158708] eth0: VIA Rhine II at 0x1d000, 00:17:31:33:82:63, IRQ 23.
[    1.159457] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 
Link 45e1.
[    1.159774] pata_via 0000:00:0f.1: version 0.3.4
[    1.162875] scsi0 : pata_via
[    1.163687] scsi1 : pata_via
[    1.167751] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.167756] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.172057] FDC 0 is a post-1991 82077
[    1.215397] uhci_hcd: USB Universal Host Controller Interface driver
[    1.215460] xen: registering gsi 20 triggering 0 polarity 1
[    1.215479] xen: --> irq=20
[    1.215490] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.215503] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    1.215519] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus 
number 2
[    1.215581] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e080
[    1.215670] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.215674] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.215678] usb usb2: Product: UHCI Host Controller
[    1.215681] usb usb2: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[    1.215684] usb usb2: SerialNumber: 0000:00:10.0
[    1.215895] usb usb2: configuration #1 chosen from 1 choice
[    1.216054] hub 2-0:1.0: USB hub found
[    1.216074] hub 2-0:1.0: 2 ports detected
[    1.216154] xen: registering gsi 22 triggering 0 polarity 1
[    1.216158] xen_allocate_pirq: returning irq 22 for gsi 22
[    1.216161] xen: --> irq=22
[    1.216165] Already setup the GSI :22
[    1.216170] uhci_hcd 0000:00:10.1: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    1.216180] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    1.216189] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus 
number 3
[    1.216224] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e000
[    1.216299] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.216303] usb usb3: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.216306] usb usb3: Product: UHCI Host Controller
[    1.216310] usb usb3: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[    1.216313] usb usb3: SerialNumber: 0000:00:10.1
[    1.216485] usb usb3: configuration #1 chosen from 1 choice
[    1.216609] hub 3-0:1.0: USB hub found
[    1.216628] hub 3-0:1.0: 2 ports detected
[    1.216701] xen: registering gsi 21 triggering 0 polarity 1
[    1.216714] xen: --> irq=21
[    1.216721] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.216731] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    1.216741] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus 
number 4
[    1.216793] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
[    1.216867] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.216871] usb usb4: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.216875] usb usb4: Product: UHCI Host Controller
[    1.216878] usb usb4: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[    1.216882] usb usb4: SerialNumber: 0000:00:10.2
[    1.217055] usb usb4: configuration #1 chosen from 1 choice
[    1.217178] hub 4-0:1.0: USB hub found
[    1.217197] hub 4-0:1.0: 2 ports detected
[    1.217269] xen: registering gsi 23 triggering 0 polarity 1
[    1.217273] xen_allocate_pirq: returning irq 23 for gsi 23
[    1.217276] xen: --> irq=23
[    1.217280] Already setup the GSI :23
[    1.217284] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    1.217294] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    1.217307] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus 
number 5
[    1.217354] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000d880
[    1.217427] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.217431] usb usb5: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.217435] usb usb5: Product: UHCI Host Controller
[    1.217439] usb usb5: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[    1.217442] usb usb5: SerialNumber: 0000:00:10.3
[    1.217613] usb usb5: configuration #1 chosen from 1 choice
[    1.217750] hub 5-0:1.0: USB hub found
[    1.217769] hub 5-0:1.0: 2 ports detected
[    1.255602] ahci 0000:00:0f.0: version 3.0
[    1.255628] xen: registering gsi 21 triggering 0 polarity 1
[    1.255632] xen_allocate_pirq: returning irq 21 for gsi 21
[    1.255636] xen: --> irq=21
[    1.255642] Already setup the GSI :21
[    1.255647] ahci 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.255699] ahci 0000:00:0f.0: controller can't do NCQ, turning off CAP_NCQ
[    1.255703] ahci 0000:00:0f.0: controller can't do PMP, turning off CAP_PMP
[    1.255756] ahci 0000:00:0f.0: PCI: Disallowing DAC for device
[    1.255785] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[    1.255790] ahci 0000:00:0f.0: flags: 64bit pm led clo pio slum part
[    1.261452] scsi2 : ahci
[    1.261728] scsi3 : ahci
[    1.261914] scsi4 : ahci
[    1.262104] scsi5 : ahci
[    1.263041] ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 
irq 21
[    1.263046] ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 
irq 21
[    1.263050] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status 
changed
[    1.263055] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status 
changed
[    1.500432] ata2.00: ATAPI: TSSTcorpCD-R/RW SH-R522C, TS05, max UDMA/33
[    1.508349] ata2.00: configured for UDMA/33
[    1.510125] scsi 1:0:0:0: CD-ROM            TSSTcorp CD-R/RW SH-R522C TS05 
PQ: 0 ANSI: 5
[    1.580029] ata3: SATA link down (SStatus 0 SControl 300)
[    1.580052] ata4: SATA link down (SStatus 0 SControl 300)
[    1.660024] usb 3-2: new low speed USB device using uhci_hcd and address 2
[    1.817305] usb 3-2: New USB device found, idVendor=0566, idProduct=3107
[    1.817309] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.817393] usb 3-2: configuration #1 chosen from 1 choice
[    1.938564] usbcore: registered new interface driver hiddev
[    1.951806] input: HID 0566:3107 as 
/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input0
[    1.951959] generic-usb 0003:0566:3107.0001: input,hidraw0: USB HID v1.10 
Keyboard [HID 0566:3107] on usb-0000:00:10.1-2/input0
[    1.975530] input: HID 0566:3107 as 
/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/input/input1
[    1.975663] generic-usb 0003:0566:3107.0002: input,hidraw1: USB HID v1.10 
Device [HID 0566:3107] on usb-0000:00:10.1-2/input1
[    1.975694] usbcore: registered new interface driver usbhid
[    1.975974] usbhid: v2.6:USB HID core driver
[    2.148024] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.148047] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.148601] ata5.00: ATA-7: MAXTOR STM3250310AS, 3.AAC, max UDMA/133
[    2.148605] ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.148636] ata6.00: ATA-7: MAXTOR STM3250310AS, 3.AAC, max UDMA/133
[    2.148640] ata6.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.149369] ata5.00: configured for UDMA/133
[    2.149397] ata6.00: configured for UDMA/133
[    2.164151] scsi 4:0:0:0: Direct-Access     ATA      MAXTOR STM325031 3.AA 
PQ: 0 ANSI: 5
[    2.164428] scsi 5:0:0:0: Direct-Access     ATA      MAXTOR STM325031 3.AA 
PQ: 0 ANSI: 5
[    2.214997] sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 
GiB)
[    2.215104] sd 4:0:0:0: [sda] Write Protect is off
[    2.215109] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.215154] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    2.215388]  sda:
[    2.215603] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 
GiB)
[    2.215707] sd 5:0:0:0: [sdb] Write Protect is off
[    2.215711] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.215756] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    2.215981]  sdb:sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda 
tray
[    2.221005] Uniform CD-ROM driver Revision: 3.20
[    2.221490] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.223489]  sda1 sda2 sda3 sda4
[    2.224534] sd 4:0:0:0: [sda] Attached SCSI disk
[    2.225119]  sdb1 sdb2 sdb3 sdb4
[    2.226074] sd 5:0:0:0: [sdb] Attached SCSI disk
[    2.249231] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    2.250354] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    2.250938] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    2.528108] md: raid1 personality registered for level 1
[    2.606725] md: md0 stopped.
[    2.616176] md: bind<sda1>
[    2.616506] md: bind<sdb1>
[    2.620511] raid1: raid set md0 active with 2 out of 2 mirrors
[    2.620544] md0: detected capacity change from 0 to 1003356160
[    2.623898]  md0: unknown partition table
[    2.691270] md: md1 stopped.
[    2.728890] md: bind<sda2>
[    2.729050] md: bind<sdb2>
[    2.731836] raid1: raid set md1 active with 2 out of 2 mirrors
[    2.731868] md1: detected capacity change from 0 to 98631680
[    2.735217]  md1:
[    2.886983] md: md2 stopped.
[    2.925192] md: bind<sda3>
[    2.925359] md: bind<sdb3>
[    2.928243] raid1: md2 is not clean -- starting background reconstruction
[    2.928248] raid1: raid set md2 active with 2 out of 2 mirrors
[    2.928279] md2: detected capacity change from 0 to 1998651392
[    2.931703]  md2: unknown partition table
[    2.990009] md: md3 stopped.
[    3.066355] md: bind<sda4>
[    3.066485] md: bind<sdb4>
[    3.069392] raid1: raid set md3 active with 2 out of 2 mirrors
[    3.069428] md3: detected capacity change from 0 to 246955704320
[    3.072519]  md3: unknown partition table
[    3.093845] device-mapper: uevent: version 1.0.3
[    3.094704] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: 
dm-devel@xxxxxxxxxx
[    3.157175] PM: Starting manual resume from disk
[    3.157181] PM: Resume from partition 9:0
[    3.157184] PM: Checking hibernation image.
[    3.183263] PM: Error -22 checking image file
[    3.183266] PM: Resume from disk failed.
[    3.201277] REISERFS (device md2): found reiserfs format "3.6" with standard 
journal
[    3.201291] REISERFS (device md2): using ordered data mode
[    3.205339] REISERFS (device md2): journal params: device md2, size 8192, 
journal first block 18, max trans len 1024, max batch 900, max commit age 30, 
max trans age 30
[    3.206102] REISERFS (device md2): checking transaction log (md2)
[    3.258171] md: resync of RAID array md2
[    3.258175] md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
[    3.258178] md: using maximum available idle IO bandwidth (but not more than 
200000 KB/sec) for resync.
[    3.258183] md: using 128k window, over a total of 1951808 blocks.
[   21.805419] REISERFS (device md2): replayed 1673 transactions in 18 seconds
[   21.838457] REISERFS (device md2): Using r5 hash to sort names
[   22.888068] udev[380]: starting version 164
[   23.210776] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   23.217141] input: Sleep Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[   23.217158] ACPI: Sleep Button [SLPB]
[   23.217250] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   23.217260] ACPI: Power Button [PWRB]
[   23.217334] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   23.217339] ACPI: Power Button [PWRF]
[   23.363101] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.900827] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   24.426262] parport_pc 00:06: reported by Plug and Play ACPI
[   24.426427] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[   24.553014] Error: Driver 'pcspkr' is already registered, aborting...
[   24.758132] xen: registering gsi 22 triggering 0 polarity 1
[   24.758138] xen_allocate_pirq: returning irq 22 for gsi 22
[   24.758141] xen: --> irq=22
[   24.758148] Already setup the GSI :22
[   24.758153] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> 
IRQ 22
[   24.758304] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   27.630643] Adding 979832k swap on /dev/md0.  Priority:-1 extents:1 
across:979832k
[   27.878666] loop: module loaded
[   28.022223] usbcore: registered new interface driver usblp
[   30.296015] REISERFS (device md1): found reiserfs format "3.6" with standard 
journal
[   30.296038] REISERFS (device md1): using ordered data mode
[   30.301804] REISERFS (device md1): journal params: device md1, size 8192, 
journal first block 18, max trans len 1024, max batch 900, max commit age 30, 
max trans age 30
[   30.302288] REISERFS (device md1): checking transaction log (md1)
[   30.334588] REISERFS (device md1): Using r5 hash to sort names
[   30.842588] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   32.136579] Event-channel device installed.
[   32.304384] lp0: using parport0 (interrupt-driven).
[   32.516899] ppdev: user-space parallel port driver
[   32.767175] XENBUS: Unable to read cpu state
[   35.803063] Bridge firewalling registered
[   36.638358] peth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   36.659625] device peth0 entered promiscuous mode
[   36.676708] eth0: port 1(peth0) entering forwarding state
[   42.223388] device vif1.0 entered promiscuous mode
[   42.229774] eth0: port 2(vif1.0) entering forwarding state
[   42.341550] ip_tables: (C) 2000-2006 Netfilter Core Team
[   42.418204] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   42.418810] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please 
use
[   42.418814] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module 
option or
[   42.418818] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   42.442587] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   42.461135] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   42.464470] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   42.464477] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   44.548240] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_32-abi)
[   44.584287] blkback: ring-ref 770, event-channel 10, protocol 1 (x86_32-abi)
[   47.020010] peth0: no IPv6 routers present
[   47.492011] eth0: no IPv6 routers present
[   51.579098] device vif2.0 entered promiscuous mode
[   51.587445] eth0: port 3(vif2.0) entering forwarding state
[   51.631688] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.631696] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.638956] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.638964] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.638969] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.652791] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.652798] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.652803] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.667481] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.667489] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.667494] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   51.667499] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   53.136013] vif1.0: no IPv6 routers present
[   53.639012] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_32-abi)
[   53.705818] blkback: ring-ref 770, event-channel 10, protocol 1 (x86_32-abi)
[   53.740519] blkback: ring-ref 771, event-channel 11, protocol 1 (x86_32-abi)
[   62.036025] vif2.0: no IPv6 routers present
[   62.310722] device vif3.0 entered promiscuous mode
[   62.315867] eth0: port 4(vif3.0) entering forwarding state
[   62.375734] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.375742] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.375747] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.375752] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.395952] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.395960] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.395966] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.395970] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.395975] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.410288] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.410295] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.410301] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.410306] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.410311] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.418515] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.418523] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.418528] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.418533] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.418537] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   62.418542] physdev match: using --physdev-out in the OUTPUT, FORWARD and 
POSTROUTING chains for non-bridged traffic is not supported anymore.
[   65.170413] blkback: ring-ref 768, event-channel 8, protocol 1 (x86_32-abi)
[   65.202538] blkback: ring-ref 771, event-channel 10, protocol 1 (x86_32-abi)
[   65.277096] blkback: ring-ref 773, event-channel 11, protocol 1 (x86_32-abi)
[   72.620013] vif3.0: no IPv6 routers present
[   75.296062] usb 3-2: USB disconnect, address 2
[  175.802781] md: md2: resync done.
[  175.848875] RAID1 conf printout:
[  175.848881]  --- wd:2 rd:2
[  175.848886]  disk 0, wo:0, o:1, dev:sdb3
[  175.848890]  disk 1, wo:0, o:1, dev:sda3
----------------------------------------------------------------------

In particular, I noticed the following lines:

----------------------------------------------------------------------
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[    0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[    0.016507] ERROR: Unable to locate IOAPIC for GSI 9

[    0.004000] ------------[ cut here ]------------
[    0.004000] WARNING: at 
/build/buildd-linux-2.6_2.6.32-31-i386-qYaaJr/linux-2.6-2.6.32/debian/build/source_i386_xen/arch/x86/xen/enlighten
.c:726 perf_events_lapic_init+0x28/0x29()
[    0.004000] Hardware name: System Product Name
[    0.004000] Modules linked in:
[    0.004000] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-686 #1
[    0.004000] Call Trace:
[    0.004000]  [<c1037799>] ? warn_slowpath_common+0x5e/0x8a
[    0.004000]  [<c10377cf>] ? warn_slowpath_null+0xa/0xc
[    0.004000]  [<c1011cdc>] ? perf_events_lapic_init+0x28/0x29
[    0.004000]  [<c14073d9>] ? init_hw_perf_events+0x2dd/0x376
[    0.004000]  [<c140702c>] ? check_bugs+0x8/0xd8
[    0.004000]  [<c13ff808>] ? start_kernel+0x309/0x31d
[    0.004000]  [<c1401410>] ? xen_start_kernel+0x564/0x56b
[    0.004000]  [<c1409046>] ? mtrr_cleanup+0x341/0x3eb
[    0.004000] ---[ end trace a7919e7f17c0a725 ]---

[   32.767175] XENBUS: Unable to read cpu state
----------------------------------------------------------------------



Thanks in advance for your replies.

Regards,
Daniel
-- 
Daniel Bareiro - System Administrator
Fingerprint: BFB3 08D6 B4D1 31B2 72B9  29CE 6696 BF1B 14E6 1D37
Powered by Debian GNU/Linux Lenny - Linux user #188.598

Attachment: signature.asc
Description: Digital signature

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>