|
|
|
|
|
|
|
|
|
|
xen-users
[Xen-users] xen-4 + megasas(DELL 6i RAID) = Reject I/O to offline device
Dear folks,
I have problem with xen-4 + megasas driver (dell raid card 6i). The raid controller goes offline randomly.
This may be the xen hypervisor problem. The following is the log message from xen 4.0 and 4.1-unstable:
xen 4.1-unstable + kernel 2.6.32.16: ->System can boot, but megasas fail after about 3-4 hours megasas: [ 0]waiting for 25 commands to complete megasas: [ 5]waiting for 25 commands to complete
megasas: [10]waiting for 25 commands to complete megasas: [15]waiting for 25 commands to complete megasas: [20]waiting for 25 commands to complete megasas: [25]waiting for 25 commands to complete
... megasas: cannot recover from previous reset failures end_request: I/O error, dev sda, sector 46755821 Buffer I/O error on device dm-0, logical block 5818372 lost page write due to I/O error on dm-0
Buffer I/O error on device dm-0, logical block 5818373 ... end_request: I/O error, dev sda, sector 7024621 Aborting journal on device dm-0. end_request: I/O error, dev sda, sector 7024653
... ext4-fs error (device dm-0) in ext4_dirty_inode: Journal has aborted sd 0:2:0:0: rejecting I/O to offline device ext4_abort called. ext4-fs error (device dm-0): ext4_journal_start_sb: Detected aborted journal
Remounting filesystem read-only end_request: I/O error, dev sda, sector 7024861 end_request: I/O error, dev sda, sector 7024893 ext4-fs error (device dm-0) in ext4_reserve_inode_write: Journal has aborted
ext4-fs error (device dm-0) in ext4_reserve_inode_write: Journal has aborted end_request: I/O error, dev sda, sector 7024965 ... Buffer I/O error on device dm-0, logical block 1
lost page write due to I/O error on dm-0 sd 0:2:0:0: rejecting I/O to offline device sd 0:2:0:0: rejecting I/O to offline device ...
xen 4.0-stable + kernel 2.6.32.16:
->System can not boot, megasas fail at boot time xen: registering gsi 33 triggering 0 polarity 1 xen: --> irq=33 megaraid_sas 0000:03:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 megaraid_sas 0000:03:00.0: setting latency timer to 64
megasas: FW now in Ready state scsi0 : LSI SAS based MegaRAID driver scsi 0:0:0:0: Direct-Access ATA WDC WD1002FBYS-1 0C10 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access ATA WDC WD1002FBYS-1 0C10 PQ: 0 ANSI: 5
scsi 0:0:2:0: Direct-Access ATA WDC WD1002FBYS-1 0C10 PQ: 0 ANSI: 5 scsi 0:0:32:0: Enclosure DP BACKPLANE 1.07 PQ: 0 ANSI: 5 scsi 0:2:0:0: Direct-Access DELL PERC 6/i 1.22 PQ: 0 ANSI: 5
megasas: [ 0]waiting for 25 commands to complete megasas: [ 5]waiting for 25 commands to complete ....
any idea about this problem?
Thanks. -----------------------------------------------------
Best regards, Chao-Rui
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Xen-users] xen-4 + megasas(DELL 6i RAID) = Reject I/O to offline device,
Chao-Rui Chang <=
|
|
|
|
|