# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-xen-amd64 (Debian 2.6.26-19lenny2) (dannf@xxxxxxxxxx) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Thu Nov 5 04:27:12 UTC 2009 [ 0.000000] Command line: root=/dev/mapper/raid-dom0--root--new ro console=tty0 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 0000000467fb4000 (usable) [ 0.000000] Entering add_active_range(0, 0, 4620212) 0 entries of 256 used [ 0.000000] max_pfn_mapped = 4620212 [ 0.000000] init_memory_mapping [ 0.000000] DMI 2.4 present. [ 0.000000] Entering add_active_range(0, 0, 4620212) 0 entries of 256 used [ 0.000000] early res: 0 [200000-631917] TEXT DATA BSS [ 0.000000] early res: 1 [632000-3eaafff] Xen provided [ 0.000000] early res: 2 [3eab000-3ebcfff] INITMAP [ 0.000000] early res: 3 [3ebd000-6210fff] PGTABLE [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 4620212 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 4620212 [ 0.000000] On node 0 totalpages: 4620212 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4040 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 1030200 pages, LIFO batch:31 [ 0.000000] Normal zone: 48831 pages used for memmap [ 0.000000] Normal zone: 3522805 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: RSDP 000F4F00, 0024 (r2 HP ) [ 0.000000] ACPI: XSDT CFE547C0, 007C (r1 HP ProLiant 2 � 162E) [ 0.000000] ACPI: FACP CFE54840, 00F4 (r3 HP ProLiant 2 � 162E) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000950/0 [20080321] [ 0.000000] ACPI: DSDT CFE54940, 23DE (r1 HP DSDT 1 INTL 20030228) [ 0.000000] ACPI: FACS CFE54100, 0040 [ 0.000000] ACPI: SPCR CFE54140, 0050 (r1 HP SPCRRBSU 1 � 162E) [ 0.000000] ACPI: MCFG CFE541C0, 003C (r1 HP ProLiant 1 0) [ 0.000000] ACPI: HPET CFE54200, 0038 (r1 HP ProLiant 2 � 162E) [ 0.000000] ACPI: SPMI CFE54240, 0040 (r5 HP ProLiant 1 � 162E) [ 0.000000] ACPI: ERST CFE54280, 01D0 (r1 HP ProLiant 1 � 162E) [ 0.000000] ACPI: APIC CFE54480, 009E (r1 HP ProLiant 2 0) [ 0.000000] ACPI: FFFF CFE54540, 0176 (r1 HP ProLiant 1 � 162E) [ 0.000000] ACPI: BERT CFE546C0, 0030 (r1 HP ProLiant 1 � 162E) [ 0.000000] ACPI: HEST CFE54700, 00BC (r1 HP ProLiant 1 � 162E) [ 0.000000] ACPI: SSDT CFE59000, 0CC5 (r1 HP SSDTP 1 INTL 20061109) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to xen [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) [ 0.000000] PERCPU: Allocating 22192 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 8 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4557045 [ 0.000000] Kernel command line: root=/dev/mapper/raid-dom0--root--new ro console=tty0 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Xen reported: 2500.014 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] console [hvc-1] enabled [ 0.004000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.004000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.004000] Software IO TLB enabled: [ 0.004000] Aperture: 64 megabytes [ 0.004000] Kernel range: ffff880018c45000 - ffff88001cc45000 [ 0.004000] Address size: 27 bits [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Memory: 18004640k/18480848k available (2279k kernel code, 467520k reserved, 1023k data, 216k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.496047] Calibrating delay using timer specific routine.. 5003.01 BogoMIPS (lpj=10006028) [ 0.496275] Security Framework initialized [ 0.496374] SELinux: Disabled at boot. [ 0.496469] Capability LSM initialized [ 0.496577] Mount-cache hash table entries: 256 [ 0.496806] Initializing cgroup subsys ns [ 0.496903] Initializing cgroup subsys cpuacct [ 0.496999] Initializing cgroup subsys devices [ 0.497116] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.497268] CPU: L2 cache: 6144K [ 0.497362] CPU: Physical Processor ID: 0 [ 0.497455] CPU: Processor Core ID: 0 [ 0.497554] SMP alternatives: switching to UP code [ 0.503570] ACPI: Core revision 20080321 [ 0.509775] SMP alternatives: switching to SMP code [ 0.512053] Initializing CPU#1 [ 0.512053] Initializing CPU#2 [ 0.512053] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.512053] CPU: L2 cache: 6144K [ 0.512053] CPU: Physical Processor ID: 0 [ 0.512053] CPU: Processor Core ID: 2 [ 0.512053] Initializing CPU#3 [ 0.512053] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.512053] CPU: L2 cache: 6144K [ 0.512053] CPU: Physical Processor ID: 1 [ 0.512053] CPU: Processor Core ID: 2 [ 0.516059] Initializing CPU#4 [ 0.516059] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.516059] CPU: L2 cache: 6144K [ 0.516059] CPU: Physical Processor ID: 0 [ 0.516059] CPU: Processor Core ID: 1 [ 0.516063] Initializing CPU#5 [ 0.516063] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.516063] CPU: L2 cache: 6144K [ 0.516063] CPU: Physical Processor ID: 1 [ 0.516063] CPU: Processor Core ID: 1 [ 0.516063] Initializing CPU#6 [ 0.516063] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.516063] CPU: L2 cache: 6144K [ 0.516063] CPU: Physical Processor ID: 0 [ 0.516063] CPU: Processor Core ID: 3 [ 0.516063] Brought up 8 CPUs [ 0.516063] CPU0 attaching sched-domain: [ 0.516063] domain 0: Initializing CPU#7 [ 0.516063] span 0-7 [ 0.516063] groups: 0 1 2 3 4 5 6 7 [ 0.516063] CPU1 attaching sched-domain: [ 0.516063] domain 0: span 0-7 [ 0.516063] groups: 1 2 3 4 5 6 7 0 [ 0.516063] CPU2 attaching sched-domain: [ 0.516063] domain 0: span 0-7 [ 0.516063] groups: 2 3 4 5 6 7 0 1 [ 0.516063] CPU3 attaching sched-domain: [ 0.516063] domain 0: span 0-7 [ 0.516063] groups: 3 4 5 6 7 0 1 2 [ 0.516063] CPU4 attaching sched-domain: [ 0.516063] domain 0: span 0-7 [ 0.516063] groups: 4 5 6 7 0 1 2 3 [ 0.516063] CPU5 attaching sched-domain: [ 0.516063] domain 0: <6>CPU: L1 I cache: 32Kspan 0-7 [ 0.516063] , L1 D cache: 32K [ 0.516063] groups:<6>CPU: L2 cache: 6144K [ 0.516063] 5 6 7 0 1 2 3 4 [ 0.516063] CPU6 attaching sched-domain: [ 0.516063] CPU: Physical Processor ID: 1 [ 0.516063] domain 0: <6>CPU: Processor Core ID: 3 [ 0.516063] span 0-7 [ 0.516063] groups: 6 7 0 1 2 3 4 5 [ 0.516063] CPU7 attaching sched-domain: [ 0.516063] domain 0: span 0-7 [ 0.516063] groups: 7 0 1 2 3 4 5 6 [ 0.517969] net_namespace: 1224 bytes [ 0.512053] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.512053] CPU: L2 cache: 6144K [ 0.512053] CPU: Physical Processor ID: 1 [ 0.512053] CPU: Processor Core ID: 0 [ 0.530375] NET: Registered protocol family 16 [ 0.532141] ACPI: bus type pci registered [ 0.532141] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.532141] PCI: MCFG area at e0000000 reserved in E820 [ 0.548138] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.548138] PCI: Using configuration type 1 for base access [ 0.548138] PCI: HP ProLiant DL380 detected, enabling pci=bfsort. [ 0.552138] ACPI: EC: Look up EC in DSDT [ 0.553863] ACPI: Interpreter enabled [ 0.553960] ACPI: (supports S0 S5) [ 0.554170] ACPI: Using IOAPIC for interrupt routing [ 0.563807] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.587406] PCI: Transparent bridge - 0000:00:1e.0 [ 0.587595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.587742] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] [ 0.587833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTA._PRT] [ 0.587900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTB._PRT] [ 0.587966] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT] [ 0.587991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT] [ 0.587991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT] [ 0.587991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE2._PRT] [ 0.587991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE3._PRT] [ 0.587991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT] [ 0.587991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT] [ 0.587991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06._PRT] [ 0.591991] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11) [ 0.591991] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) [ 0.592574] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11) [ 0.593092] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) [ 0.593604] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled. [ 0.594233] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) [ 0.597492] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) [ 0.598006] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11) [ 0.598729] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.598729] pnp: PnP ACPI init [ 0.598729] ACPI: bus type pnp registered [ 0.598885] pnp 00:00: parse allocated resources [ 0.602729] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.602729] pnp 00:01: parse allocated resources [ 0.602729] pnp 00:01: add io 0x70-0x77 flags 0x1 [ 0.602729] pnp 00:01: add io 0x408-0x40f flags 0x1 [ 0.602729] pnp 00:01: add io 0x4d0-0x4d1 flags 0x1 [ 0.602729] pnp 00:01: add io 0x20-0x3f flags 0x1 [ 0.602729] pnp 00:01: add io 0xa0-0xbf flags 0x1 [ 0.602729] pnp 00:01: add io 0x90-0x9f flags 0x1 [ 0.602729] pnp 00:01: add io 0x50-0x53 flags 0x1 [ 0.602729] pnp 00:01: add io 0x700-0x71f flags 0x1 [ 0.602729] pnp 00:01: add io 0x800-0x83f flags 0x1 [ 0.602729] pnp 00:01: add io 0x900-0x97f flags 0x1 [ 0.602729] pnp 00:01: add io 0x10-0x1f flags 0x1 [ 0.602729] pnp 00:01: add io 0xc80-0xc83 flags 0x1 [ 0.602729] pnp 00:01: add io 0xcd4-0xcd7 flags 0x1 [ 0.602729] pnp 00:01: add io 0xf50-0xf58 flags 0x1 [ 0.602729] pnp 00:01: add io 0xf0-0xf0 flags 0x1 [ 0.602729] pnp 00:01: add io 0xca0-0xca1 flags 0x1 [ 0.602729] pnp 00:01: add io 0xca4-0xca5 flags 0x1 [ 0.602729] pnp 00:01: add mem 0xe0000000-0xefffffff flags 0x1 [ 0.602729] pnp 00:01: add mem 0xfe000000-0xfebfffff flags 0x1 [ 0.602729] pnp 00:01: add io 0x2f8-0x2ff flags 0x1 [ 0.602729] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.602729] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.602729] pnp 00:02: parse allocated resources [ 0.602729] pnp 00:02: add io 0xca2-0xca3 flags 0x1 [ 0.602729] pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active) [ 0.602729] pnp 00:03: parse allocated resources [ 0.602729] pnp 00:03: add mem 0xfed00000-0xfed003ff flags 0x0 [ 0.602729] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.602729] pnp 00:04: parse allocated resources [ 0.602729] pnp 00:04: add dma 7 flags 0x2 [ 0.602729] pnp 00:04: add io 0x0-0xf flags 0x1 [ 0.602729] pnp 00:04: add io 0x80-0x8f flags 0x1 [ 0.602729] pnp 00:04: add io 0xc0-0xdf flags 0x1 [ 0.602729] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.602729] pnp 00:05: parse allocated resources [ 0.602729] pnp 00:05: add io 0x61-0x61 flags 0x1 [ 0.602729] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.602729] pnp 00:06: parse allocated resources [ 0.602729] pnp 00:06: add io 0x60-0x60 flags 0x1 [ 0.602729] pnp 00:06: add io 0x64-0x64 flags 0x1 [ 0.602729] pnp 00:06: add irq 1 flags 0x1 [ 0.602729] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.602729] pnp 00:07: parse allocated resources [ 0.602729] pnp 00:07: add irq 12 flags 0x1 [ 0.602729] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.602729] pnp 00:08: parse allocated resources [ 0.602729] pnp 00:08: add io 0x2e-0x2f flags 0x1 [ 0.602729] pnp 00:08: add io 0x4e-0x4f flags 0x1 [ 0.602729] pnp 00:08: add io 0x620-0x65f flags 0x1 [ 0.602729] pnp 00:08: add io 0x680-0x69f flags 0x1 [ 0.602729] pnp 00:08: add io 0x600-0x61f flags 0x1 [ 0.602729] pnp 00:08: add io 0x660-0x67f flags 0x1 [ 0.602729] pnp 00:08: add io 0x300-0x30f flags 0x1 [ 0.602729] pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active) [ 0.602729] pnp 00:09: parse allocated resources [ 0.602729] pnp 00:09: add irq 4 flags 0x1 [ 0.602729] pnp 00:09: add io 0x3f8-0x3ff flags 0x1 [ 0.602729] pnp 00:09: parse resource options [ 0.602729] pnp 00:09: new independent option [ 0.602729] pnp 00:09: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1 [ 0.602729] pnp 00:09: io min 0x3f8 max 0x3f8 align 0 size 8 flags 0x1 [ 0.602729] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.602729] pnp: PnP ACPI: found 10 devices [ 0.602729] ACPI: ACPI bus type pnp unregistered [ 0.602729] xen_mem: Initialising balloon driver. [ 0.602729] usbcore: registered new interface driver usbfs [ 0.602729] usbcore: registered new interface driver hub [ 0.602729] usbcore: registered new device driver usb [ 0.602729] PCI: Using ACPI for IRQ routing [ 0.638736] pnp: the driver 'system' has been registered [ 0.638747] system 00:01: ioport range 0x408-0x40f has been reserved [ 0.638818] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.638818] system 00:01: ioport range 0x700-0x71f has been reserved [ 0.638818] system 00:01: ioport range 0x800-0x83f has been reserved [ 0.638818] system 00:01: ioport range 0x900-0x97f has been reserved [ 0.638818] system 00:01: ioport range 0xc80-0xc83 has been reserved [ 0.638818] system 00:01: ioport range 0xcd4-0xcd7 has been reserved [ 0.638818] system 00:01: ioport range 0xf50-0xf58 has been reserved [ 0.638818] system 00:01: ioport range 0xca0-0xca1 has been reserved [ 0.638818] system 00:01: ioport range 0xca4-0xca5 has been reserved [ 0.638818] system 00:01: ioport range 0x2f8-0x2ff has been reserved [ 0.638818] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.638818] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved [ 0.638818] system 00:01: driver attached [ 0.638818] PCI: Bridge: 0000:0a:00.0 [ 0.638818] IO window: disabled. [ 0.638818] MEM window: disabled. [ 0.638818] PREFETCH window: disabled. [ 0.638818] PCI: Bridge: 0000:0a:01.0 [ 0.638818] IO window: disabled. [ 0.638818] MEM window: disabled. [ 0.644331] PREFETCH window: disabled. [ 0.644606] PCI: Bridge: 0000:0a:02.0 [ 0.644707] IO window: disabled. [ 0.644926] MEM window: disabled. [ 0.645109] PREFETCH window: disabled. [ 0.645384] PCI: Bridge: 0000:09:00.0 [ 0.645485] IO window: disabled. [ 0.645705] MEM window: disabled. [ 0.645888] PREFETCH window: disabled. [ 0.646163] PCI: Bridge: 0000:09:00.3 [ 0.646263] IO window: disabled. [ 0.646483] MEM window: disabled. [ 0.646667] PREFETCH window: disabled. [ 0.646941] PCI: Bridge: 0000:00:02.0 [ 0.647042] IO window: disabled. [ 0.647148] MEM window: 0xfdf00000-0xfdffffff [ 0.647256] PREFETCH window: disabled. [ 0.647367] PCI: Bridge: 0000:00:03.0 [ 0.647469] IO window: 4000-4fff [ 0.647565] MEM window: 0xfdd00000-0xfdefffff [ 0.647658] PREFETCH window: 0x00000000d1000000-0x00000000d10fffff [ 0.648156] PCI: Bridge: 0000:00:04.0 [ 0.648252] IO window: disabled. [ 0.648348] MEM window: disabled. [ 0.648441] PREFETCH window: disabled. [ 0.648540] PCI: Bridge: 0000:00:05.0 [ 0.648645] IO window: disabled. [ 0.648758] MEM window: disabled. [ 0.648868] PREFETCH window: disabled. [ 0.648985] PCI: Bridge: 0000:00:06.0 [ 0.649092] IO window: disabled. [ 0.649204] MEM window: disabled. [ 0.649314] PREFETCH window: disabled. [ 0.649431] PCI: Bridge: 0000:00:07.0 [ 0.649538] IO window: disabled. [ 0.649650] MEM window: disabled. [ 0.649760] PREFETCH window: disabled. [ 0.649879] PCI: Bridge: 0000:02:00.0 [ 0.649985] IO window: disabled. [ 0.650100] MEM window: 0xf8000000-0xf9ffffff [ 0.650216] PREFETCH window: 0x00000000d1100000-0x00000000d11fffff [ 0.650343] PCI: Bridge: 0000:00:1c.0 [ 0.650449] IO window: disabled. [ 0.650563] MEM window: 0xf8000000-0xf9ffffff [ 0.650677] PREFETCH window: 0x00000000d1100000-0x00000000d11fffff [ 0.650803] PCI: Bridge: 0000:04:00.0 [ 0.650909] IO window: disabled. [ 0.651024] MEM window: 0xfa000000-0xfbffffff [ 0.651139] PREFETCH window: 0x00000000d1200000-0x00000000d12fffff [ 0.651267] PCI: Bridge: 0000:00:1c.1 [ 0.651373] IO window: disabled. [ 0.651486] MEM window: 0xfa000000-0xfbffffff [ 0.651601] PREFETCH window: 0x00000000d1200000-0x00000000d12fffff [ 0.651729] PCI: Bridge: 0000:00:1e.0 [ 0.651838] IO window: 2000-3fff [ 0.651951] MEM window: 0xf7e00000-0xf7ffffff [ 0.652067] PREFETCH window: 0x00000000d8000000-0x00000000dfffffff [ 0.652219] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 0.652674] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 0.653229] ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.653499] PCI: Setting latency timer of device 0000:0a:00.0 to 64 [ 0.654051] ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.654323] PCI: Setting latency timer of device 0000:0a:01.0 to 64 [ 0.654875] ACPI: PCI Interrupt 0000:0a:02.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.655147] PCI: Setting latency timer of device 0000:0a:02.0 to 64 [ 0.655697] PCI: Setting latency timer of device 0000:09:00.3 to 64 [ 0.655766] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 0.655793] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 0.655820] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 0.655847] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 0.655873] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 0.655914] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.656133] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.656153] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 0.656200] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.656419] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.656467] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 0.656491] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.656619] NET: Registered protocol family 2 [ 0.696346] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.698045] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.699796] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.700335] TCP: Hash tables configured (established 262144 bind 65536) [ 0.700426] TCP reno registered [ 0.712411] NET: Registered protocol family 1 [ 0.712624] checking if image is initramfs... it is [ 0.735110] Freeing initrd memory: 21601k freed [ 0.746362] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.747459] audit: initializing netlink socket (disabled) [ 0.747459] type=2000 audit(1273689870.732:1): initialized [ 0.755072] VFS: Disk quotas dquot_6.5.1 [ 0.755072] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.755072] msgmni has been set to 32768 [ 0.755072] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.755072] io scheduler noop registered [ 0.755072] io scheduler anticipatory registered [ 0.755072] io scheduler deadline registered [ 0.755072] io scheduler cfq registered (default) [ 0.768504] pci 0000:01:03.0: Boot video device [ 0.771308] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 0.771308] assign_interrupt_mode Found MSI capability [ 0.771308] no ownder [ 0.771308] map irq failed [ 0.771308] Allocate Port Service[0000:00:02.0:pcie00] [ 0.771308] Allocate Port Service[0000:00:02.0:pcie01] [ 0.771308] PCI: Setting latency timer of device 0000:00:03.0 to 64 [ 0.771308] assign_interrupt_mode Found MSI capability [ 0.771308] no ownder [ 0.771308] map irq failed [ 0.771308] Allocate Port Service[0000:00:03.0:pcie00] [ 0.771308] Allocate Port Service[0000:00:03.0:pcie01] [ 0.771308] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 0.771308] assign_interrupt_mode Found MSI capability [ 0.771308] no ownder [ 0.771308] map irq failed [ 0.771308] Allocate Port Service[0000:00:04.0:pcie00] [ 0.771308] Allocate Port Service[0000:00:04.0:pcie01] [ 0.771308] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 0.771308] assign_interrupt_mode Found MSI capability [ 0.771308] no ownder [ 0.771308] map irq failed [ 0.771308] Allocate Port Service[0000:00:05.0:pcie00] [ 0.771308] Allocate Port Service[0000:00:05.0:pcie01] [ 0.771308] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 0.777070] assign_interrupt_mode Found MSI capability [ 0.777207] no ownder [ 0.784971] map irq failed [ 0.785059] Allocate Port Service[0000:00:06.0:pcie00] [ 0.785303] Allocate Port Service[0000:00:06.0:pcie01] [ 0.785670] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 0.785765] assign_interrupt_mode Found MSI capability [ 0.785902] no ownder [ 0.785988] map irq failed [ 0.786076] Allocate Port Service[0000:00:07.0:pcie00] [ 0.786298] Allocate Port Service[0000:00:07.0:pcie01] [ 0.786641] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.786723] assign_interrupt_mode Found MSI capability [ 0.786864] no ownder [ 0.786951] map irq failed [ 0.787039] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.787186] Allocate Port Service[0000:00:1c.0:pcie03] [ 0.787186] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.787221] assign_interrupt_mode Found MSI capability [ 0.787363] no ownder [ 0.787450] map irq failed [ 0.787537] Allocate Port Service[0000:00:1c.1:pcie00] [ 0.788971] Allocate Port Service[0000:00:1c.1:pcie03] [ 0.788971] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 0.788971] Allocate Port Service[0000:09:00.0:pcie11] [ 0.791936] PCI: Setting latency timer of device 0000:0a:00.0 to 64 [ 0.793264] assign_interrupt_mode Found MSI capability [ 0.794593] no ownder [ 0.794680] map irq failed [ 0.794768] Allocate Port Service[0000:0a:00.0:pcie21] [ 0.797291] PCI: Setting latency timer of device 0000:0a:01.0 to 64 [ 0.798619] assign_interrupt_mode Found MSI capability [ 0.799535] no ownder [ 0.799621] map irq failed [ 0.799709] Allocate Port Service[0000:0a:01.0:pcie21] [ 0.802003] PCI: Setting latency timer of device 0000:0a:02.0 to 64 [ 0.803331] assign_interrupt_mode Found MSI capability [ 0.804252] no ownder [ 0.804339] map irq failed [ 0.804427] Allocate Port Service[0000:0a:02.0:pcie21] [ 0.807600] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support [ 0.808183] AER service couldn't init device 0000:00:03.0:pcie01 - no _OSC support [ 0.808251] AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support [ 0.808881] AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support [ 0.809458] AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support [ 0.810036] AER service couldn't init device 0000:00:07.0:pcie01 - no _OSC support [ 0.816299] Linux agpgart interface v0.103 [ 0.816299] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 0.816299] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.816299] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.820183] pnp: the driver 'serial' has been registered [ 0.820306] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.820306] serial 00:09: driver attached [ 0.820306] brd: module loaded [ 0.820306] input: Macintosh mouse button emulation as /class/input/input0 [ 0.820306] Xen virtual console successfully installed as hvc0 [ 0.820306] Event-channel device installed. [ 0.824307] netfront: Initialising virtual ethernet driver. [ 0.828298] pnp: the driver 'i8042 kbd' has been registered [ 0.828310] i8042 kbd 00:06: driver attached [ 0.828706] pnp: the driver 'i8042 aux' has been registered [ 0.828721] i8042 aux 00:07: driver attached [ 0.829130] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 0.830953] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.831054] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.849979] mice: PS/2 mouse device common for all mice [ 0.850158] pnp: the driver 'rtc_cmos' has been registered [ 0.850354] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.850474] rtc0: alarms up to one day [ 0.891488] input: AT Translated Set 2 keyboard as /class/input/input1 [ 0.912691] No iBFT detected. [ 0.913198] TCP cubic registered [ 0.913289] NET: Registered protocol family 17 [ 0.915363] registered taskstats version 1 [ 0.915575] rtc_cmos rtc_cmos: setting system clock to 2010-05-12 18:44:30 UTC (1273689870) [ 0.915575] Freeing unused kernel memory: 216k freed [ 1.043578] ACPI: SSDT CFE5F800, 00C5 (r1 HP CPU0CST 1 INTL 20061109) [ 1.043578] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.047581] ACPI: ACPI0007:00 is registered as cooling_device0 [ 1.047581] ACPI: SSDT CFE5F900, 00C5 (r1 HP CPU1CST 1 INTL 20061109) [ 1.047581] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.047581] ACPI: ACPI0007:01 is registered as cooling_device1 [ 1.047581] ACPI: SSDT CFE5FA00, 00C5 (r1 HP CPU2CST 1 INTL 20061109) [ 1.047581] ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3]) [ 1.047581] ACPI: ACPI0007:02 is registered as cooling_device2 [ 1.047581] ACPI: SSDT CFE5FB00, 00C5 (r1 HP CPU3CST 1 INTL 20061109) [ 1.052106] ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3]) [ 1.054340] ACPI: ACPI0007:03 is registered as cooling_device3 [ 1.054818] ACPI: SSDT CFE5FC00, 00C5 (r1 HP CPU4CST 1 INTL 20061109) [ 1.055280] ACPI: CPU4 (power states: C1[C1] C2[C2] C3[C3]) [ 1.055989] ACPI: ACPI0007:04 is registered as cooling_device4 [ 1.055989] ACPI: SSDT CFE5FD00, 00C5 (r1 HP CPU5CST 1 INTL 20061109) [ 1.055989] ACPI: CPU5 (power states: C1[C1] C2[C2] C3[C3]) [ 1.055989] ACPI: ACPI0007:05 is registered as cooling_device5 [ 1.055989] ACPI: SSDT CFE5FE00, 00C5 (r1 HP CPU6CST 1 INTL 20061109) [ 1.056289] ACPI: CPU6 (power states: C1[C1] C2[C2] C3[C3]) [ 1.058181] ACPI: ACPI0007:06 is registered as cooling_device6 [ 1.058671] ACPI: SSDT CFE5FF00, 00C5 (r1 HP CPU7CST 1 INTL 20061109) [ 1.059137] ACPI: CPU7 (power states: C1[C1] C2[C2] C3[C3]) [ 1.059994] ACPI: ACPI0007:07 is registered as cooling_device7 [ 1.059994] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 1.059994] ACPI: Thermal Zone [THM0] (8 C) [ 1.299259] SCSI subsystem initialized [ 1.313521] HP CISS Driver (v 3.6.20) [ 1.313584] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 1.313851] no ownder [ 1.313941] map irq failed [ 1.314031] cciss: MSI-X init failed -16 [ 1.337407] USB Universal Host Controller Interface driver v3.0 [ 1.354134] No dock devices found. [ 1.373777] libata version 3.00 loaded. [ 1.403519] cciss0: <0x3230> at PCI 0000:06:00.0 IRQ 18 using DAC [ 1.415491] blocks= 1171743836 block_size= 512 [ 1.419490] heads=255, sectors=32, cylinders=143597 [ 1.419491] [ 1.419843] blocks= 1171743836 block_size= 512 [ 1.420004] heads=255, sectors=32, cylinders=143597 [ 1.420005] [ 1.420184] cciss/c0d0: p1 p2 [ 1.423109] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.423304] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 1.423310] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.423568] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.423738] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000 [ 1.423960] usb usb1: configuration #1 chosen from 1 choice [ 1.424087] hub 1-0:1.0: USB hub found [ 1.424191] hub 1-0:1.0: 2 ports detected [ 1.529676] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.529776] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.529882] usb usb1: Product: UHCI Host Controller [ 1.529974] usb usb1: Manufacturer: Linux 2.6.26-2-xen-amd64 uhci_hcd [ 1.530068] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.530246] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 1.530434] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 1.530439] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.530568] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 1.530720] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020 [ 1.530902] usb usb2: configuration #1 chosen from 1 choice [ 1.531019] hub 2-0:1.0: USB hub found [ 1.531118] hub 2-0:1.0: 2 ports detected [ 1.635150] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.635247] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.635354] usb usb2: Product: UHCI Host Controller [ 1.635446] usb usb2: Manufacturer: Linux 2.6.26-2-xen-amd64 uhci_hcd [ 1.635540] usb usb2: SerialNumber: 0000:00:1d.1 [ 1.635714] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 1.635901] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 1.635906] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.636035] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 1.636181] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040 [ 1.636371] usb usb3: configuration #1 chosen from 1 choice [ 1.636489] hub 3-0:1.0: USB hub found [ 1.636587] hub 3-0:1.0: 2 ports detected [ 1.739469] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.739567] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.739674] usb usb3: Product: UHCI Host Controller [ 1.739765] usb usb3: Manufacturer: Linux 2.6.26-2-xen-amd64 uhci_hcd [ 1.739860] usb usb3: SerialNumber: 0000:00:1d.2 [ 1.740095] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 1.740282] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 1.740287] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.740419] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 1.740569] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060 [ 1.740752] usb usb4: configuration #1 chosen from 1 choice [ 1.740869] hub 4-0:1.0: USB hub found [ 1.740968] hub 4-0:1.0: 2 ports detected [ 1.843504] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.843601] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.843708] usb usb4: Product: UHCI Host Controller [ 1.843799] usb usb4: Manufacturer: Linux 2.6.26-2-xen-amd64 uhci_hcd [ 1.843894] usb usb4: SerialNumber: 0000:00:1d.3 [ 1.848207] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.848411] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 1.848416] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.848443] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 1.852442] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.852442] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 1.852442] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf7df0000 [ 1.867160] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.867316] usb usb5: configuration #1 chosen from 1 choice [ 1.867434] hub 5-0:1.0: USB hub found [ 1.867536] hub 5-0:1.0: 8 ports detected [ 1.971052] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.971149] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.971256] usb usb5: Product: EHCI Host Controller [ 1.971347] usb usb5: Manufacturer: Linux 2.6.26-2-xen-amd64 ehci_hcd [ 1.971442] usb usb5: SerialNumber: 0000:00:1d.7 [ 1.972092] ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 22 [ 1.972280] uhci_hcd 0000:01:04.4: UHCI Host Controller [ 1.972414] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6 [ 1.980058] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports [ 1.981201] uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800 [ 1.981634] usb usb6: configuration #1 chosen from 1 choice [ 1.981752] hub 6-0:1.0: USB hub found [ 1.981851] hub 6-0:1.0: 2 ports detected [ 2.085108] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.085206] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.085313] usb usb6: Product: UHCI Host Controller [ 2.085405] usb usb6: Manufacturer: Linux 2.6.26-2-xen-amd64 uhci_hcd [ 2.085499] usb usb6: SerialNumber: 0000:01:04.4 [ 2.090057] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.5 (April 29, 2008) [ 2.090084] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 2.338699] usb 6-1: new full speed USB device using uhci_hcd and address 2 [ 2.492722] usb 6-1: configuration #1 chosen from 1 choice [ 2.502883] usb 6-1: New USB device found, idVendor=03f0, idProduct=1027 [ 2.502982] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.503078] usb 6-1: Product: Virtual Keyboard [ 2.503169] usb 6-1: Manufacturer: HP [ 2.585131] firmware: requesting bnx2-06-4.0.5.fw [ 2.591529] eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:23:7d:24:a6:aa [ 2.591529] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 2.746988] usb 6-2: new full speed USB device using uhci_hcd and address 3 [ 2.894215] usb 6-2: configuration #1 chosen from 1 choice [ 2.896325] hub 6-2:1.0: USB hub found [ 2.898131] hub 6-2:1.0: 7 ports detected [ 3.024060] usb 6-2: New USB device found, idVendor=03f0, idProduct=1327 [ 3.024150] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.024239] usb 6-2: Product: Virtual Hub [ 3.024321] usb 6-2: Manufacturer: HP [ 3.044256] usbcore: registered new interface driver hiddev [ 3.050865] input: HP Virtual Keyboard as /class/input/input2 [ 3.080001] input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 [ 3.085474] firmware: requesting bnx2-06-4.0.5.fw [ 3.085907] input: HP Virtual Keyboard as /class/input/input3 [ 3.093841] eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 17, node addr 00:23:7d:24:a6:a8 [ 3.101938] Uniform Multi-Platform E-IDE driver [ 3.102037] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.104242] ESB2: IDE controller (0x8086:0x269e rev 0x09) at PCI slot 0000:00:1f.1 [ 3.104372] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 17 [ 3.104562] ESB2: not 100% native mode: will probe irqs later [ 3.104673] ide0: BM-DMA at 0x0500-0x0507 [ 3.104858] ide1: BM-DMA at 0x0508-0x050f [ 3.104904] Probing IDE interface ide0... [ 3.114699] input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 [ 3.115099] usbcore: registered new interface driver usbhid [ 3.115193] usbhid: v2.6:USB HID core driver [ 3.843005] hda: TEAC DV-W28E-R, ATAPI CD/DVD-ROM drive [ 4.178735] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.180052] hda: UDMA/33 mode selected [ 4.182303] Probing IDE interface ide1... [ 4.750798] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.750973] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.791540] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache [ 4.792039] Uniform CD-ROM driver Revision: 3.20 [ 5.330372] device-mapper: uevent: version 1.0.3 [ 5.330885] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx [ 6.160947] EXT3-fs: INFO: recovery required on readonly filesystem. [ 6.161047] EXT3-fs: write access will be enabled during recovery. [ 6.428157] kjournald starting. Commit interval 5 seconds [ 6.429415] EXT3-fs: recovery complete. [ 6.429415] EXT3-fs: mounted filesystem with ordered data mode. [ 7.382369] udevd version 125 started [ 7.927550] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 7.951005] EDAC MC: Ver: 2.1.0 Nov 5 2009 [ 7.990566] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 [ 7.990566] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) [ 8.007690] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.041808] input: Power Button (FF) as /class/input/input4 [ 8.048409] input: PC Speaker as /class/input/input5 [ 8.059751] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 8.090585] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 8.090782] hpwdt: New timer passed in is 30 seconds. [ 8.090892] hp Watchdog Timer Driver: 1.00, timer margin: 30 seconds( nowayout=0). [ 8.110080] ACPI: Power Button (FF) [PWRF] [ 8.122025] ACPI: PCI Interrupt 0000:01:04.2[B] -> GSI 22 (level, low) -> IRQ 22 [ 8.529737] input: PS/2 Logitech Mouse as /class/input/input6 [ 8.565737] ipmi message handler version 39.2 [ 8.568657] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 8.568657] iTCO_wdt: No card detected [ 8.583253] IPMI System Interface driver. [ 8.583352] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 8.594048] intel_rng: FWH not detected [ 8.694995] ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) [ 8.695117] IPMI kcs interface initialized [ 8.695219] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 8.695335] ipmi_si: duplicate interface [ 8.714668] ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 21 (level, low) -> IRQ 21 [ 8.714850] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 21 [ 8.798609] Using irq 21 [ 8.991404] ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) [ 8.991526] IPMI kcs interface initialized [ 10.622602] EXT3 FS on dm-24, internal journal [ 11.610773] loop: module loaded [ 32.906157] kjournald starting. Commit interval 5 seconds [ 32.906470] EXT3 FS on cciss/c0d0p1, internal journal [ 32.906476] EXT3-fs: mounted filesystem with ordered data mode. [ 32.907549] kjournald starting. Commit interval 5 seconds [ 32.907549] EXT3 FS on dm-5, internal journal [ 32.907553] EXT3-fs: mounted filesystem with ordered data mode. [ 32.908661] kjournald starting. Commit interval 5 seconds [ 32.908661] EXT3 FS on dm-2, internal journal [ 32.908665] EXT3-fs: mounted filesystem with ordered data mode. [ 32.909769] kjournald starting. Commit interval 5 seconds [ 32.909769] EXT3 FS on dm-3, internal journal [ 32.909773] EXT3-fs: mounted filesystem with ordered data mode. [ 32.999596] ReiserFS: dm-4: found reiserfs format "3.6" with standard journal [ 32.999704] ReiserFS: dm-4: using ordered data mode [ 32.999925] ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 33.000630] ReiserFS: dm-4: checking transaction log (dm-4) [ 33.007639] ReiserFS: dm-4: Using r5 hash to sort names [ 33.039056] Adding 3903480k swap on /dev/mapper/raid-dom0--SWAP. Priority:-1 extents:1 across:3903480k [ 33.535548] no ownder [ 33.535548] map irq failed [ 33.842702] Loading iSCSI transport class v2.0-869. [ 33.867561] iscsi: registered transport (tcp) [ 33.947676] NET: Registered protocol family 10 [ 33.947676] lo: Disabled Privacy Extensions [ 33.947798] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.009852] iscsi: registered transport (iser) [ 35.269868] bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex [ 35.272455] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 45.786902] eth0: no IPv6 routers present [ 70.683625] scsi0 : iSCSI Initiator over TCP/IP [ 70.724151] scsi1 : iSCSI Initiator over TCP/IP [ 70.731628] scsi2 : iSCSI Initiator over TCP/IP [ 79.464476] Bridge firewalling registered [ 79.466437] tmpbridge: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 79.752320] no ownder [ 79.752416] map irq failed [ 79.938718] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 81.539374] bnx2: peth0 NIC Copper Link is Up, 100 Mbps full duplex [ 81.542020] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 81.979137] device peth0 entered promiscuous mode [ 82.009774] eth0: port 1(peth0) entering learning state [ 82.013782] eth0: topology change detected, propagating [ 82.013891] eth0: port 1(peth0) entering forwarding state [ 82.439441] suspend: event channel 49 [ 86.875988] device vif1.0 entered promiscuous mode [ 86.883303] eth0: port 2(vif1.0) entering learning state [ 86.886044] eth0: topology change detected, propagating [ 86.886147] eth0: port 2(vif1.0) entering forwarding state [ 86.966059] ip_tables: (C) 2000-2006 Netfilter Core Team [ 88.340659] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 88.348913] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 91.864973] peth0: no IPv6 routers present [ 92.303531] eth0: no IPv6 routers present [ 95.133612] device vif2.0 entered promiscuous mode [ 95.138637] eth0: port 3(vif2.0) entering learning state [ 95.141781] eth0: topology change detected, propagating [ 95.141892] eth0: port 3(vif2.0) entering forwarding state [ 96.632290] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 96.636528] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 97.077767] vif1.0: no IPv6 routers present [ 103.129148] device vif3.0 entered promiscuous mode [ 103.135542] eth0: port 4(vif3.0) entering learning state [ 103.137047] eth0: topology change detected, propagating [ 103.137166] eth0: port 4(vif3.0) entering forwarding state [ 104.614284] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 104.622195] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 105.601196] vif2.0: no IPv6 routers present [ 111.128163] device vif4.0 entered promiscuous mode [ 111.136490] eth0: port 5(vif4.0) entering learning state [ 111.136495] eth0: topology change detected, propagating [ 111.140272] eth0: port 5(vif4.0) entering forwarding state [ 112.622690] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 112.632814] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 113.572813] vif3.0: no IPv6 routers present [ 119.127651] device vif5.0 entered promiscuous mode [ 119.136291] eth0: port 6(vif5.0) entering learning state [ 119.142638] eth0: topology change detected, propagating [ 119.144210] eth0: port 6(vif5.0) entering forwarding state [ 120.675867] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 120.689376] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 122.131269] vif4.0: no IPv6 routers present [ 129.244787] device vif6.0 entered promiscuous mode [ 129.251406] eth0: port 7(vif6.0) entering learning state [ 129.253559] eth0: topology change detected, propagating [ 129.256647] eth0: port 7(vif6.0) entering forwarding state [ 130.220565] vif5.0: no IPv6 routers present [ 130.838502] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 130.846473] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 139.398285] device vif7.0 entered promiscuous mode [ 139.407688] eth0: port 8(vif7.0) entering learning state [ 139.411231] eth0: topology change detected, propagating [ 139.411353] eth0: port 8(vif7.0) entering forwarding state [ 139.542580] vif6.0: no IPv6 routers present [ 140.941639] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 140.949088] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 150.411284] vif7.0: no IPv6 routers present [ 177.797933] device vif8.0 entered promiscuous mode [ 177.806581] eth0: port 9(vif8.0) entering learning state [ 177.806586] eth0: topology change detected, propagating [ 177.807311] eth0: port 9(vif8.0) entering forwarding state [ 188.764453] vif8.0: no IPv6 routers present [ 192.959846] blkback: ring-ref 8, event-channel 12, protocol 1 (x86_64-abi) [ 192.980607] blkback: ring-ref 9, event-channel 13, protocol 1 (x86_64-abi) [ 192.993562] blkback: ring-ref 10, event-channel 14, protocol 1 (x86_64-abi) [ 193.004187] blkback: ring-ref 11, event-channel 15, protocol 1 (x86_64-abi) [ 193.015265] blkback: ring-ref 12, event-channel 16, protocol 1 (x86_64-abi) [ 193.029225] blkback: ring-ref 13, event-channel 17, protocol 1 (x86_64-abi) [ 193.033415] blkback: ring-ref 14, event-channel 18, protocol 1 (x86_64-abi) [ 193.040888] blkback: ring-ref 15, event-channel 19, protocol 1 (x86_64-abi) [ 290.272530] device vif9.0 entered promiscuous mode [ 290.279831] eth0: port 10(vif9.0) entering learning state [ 290.291669] eth0: topology change detected, propagating [ 290.291774] eth0: port 10(vif9.0) entering forwarding state [ 291.884109] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 291.892871] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 301.165847] vif9.0: no IPv6 routers present [ 336.619166] device vif10.0 entered promiscuous mode [ 336.638037] eth0: port 11(vif10.0) entering learning state [ 336.642399] eth0: topology change detected, propagating [ 336.642501] eth0: port 11(vif10.0) entering forwarding state [ 342.830052] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 342.851877] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 342.862644] blkback: ring-ref 10, event-channel 10, protocol 1 (x86_64-abi) [ 342.868132] blkback: ring-ref 11, event-channel 11, protocol 1 (x86_64-abi) [ 342.876716] blkback: ring-ref 12, event-channel 12, protocol 1 (x86_64-abi) [ 342.880716] blkback: ring-ref 13, event-channel 13, protocol 1 (x86_64-abi) [ 347.391764] vif10.0: no IPv6 routers present [ 369.653999] device vif11.0 entered promiscuous mode [ 369.659994] eth0: port 12(vif11.0) entering learning state [ 369.662579] eth0: topology change detected, propagating [ 369.664195] eth0: port 12(vif11.0) entering forwarding state [ 371.326752] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 371.340257] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 380.642086] vif11.0: no IPv6 routers present [ 783.694666] device vif12.0 entered promiscuous mode [ 783.699696] eth0: port 13(vif12.0) entering learning state [ 783.701401] eth0: topology change detected, propagating [ 783.701499] eth0: port 13(vif12.0) entering forwarding state [ 785.345035] blkback: ring-ref 8, event-channel 8, protocol 1 (x86_64-abi) [ 785.356380] blkback: ring-ref 9, event-channel 9, protocol 1 (x86_64-abi) [ 794.532033] vif12.0: no IPv6 routers present [34783.559174] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error } [34783.559248] hda: task_in_intr: error=0x04 { AbortedCommand } [34783.559289] ide: failed opcode was: 0xec [121232.732355] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error } [121232.732413] hda: task_in_intr: error=0x04 { AbortedCommand } [121232.732455] ide: failed opcode was: 0xec [207708.187565] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error } [207708.187623] hda: task_in_intr: error=0x04 { AbortedCommand } [207708.187664] ide: failed opcode was: 0xec [294224.164969] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error } [294224.165029] hda: task_in_intr: error=0x04 { AbortedCommand } [294224.165075] ide: failed opcode was: 0xec [380705.378232] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error } [380705.378232] hda: task_in_intr: error=0x04 { AbortedCommand } [380705.378232] ide: failed opcode was: 0xec [467193.505658] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error } [467193.505717] hda: task_in_intr: error=0x04 { AbortedCommand } [467193.505758] ide: failed opcode was: 0xec [553683.657031] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error } [553683.657091] hda: task_in_intr: error=0x04 { AbortedCommand } [553683.657132] ide: failed opcode was: 0xec [640176.673218] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error } [640176.673218] hda: task_in_intr: error=0x04 { AbortedCommand } [640176.673218] ide: failed opcode was: 0xec [726657.593721] hda: task_in_intr: status=0x51 { DriveReady SeekComplete Error } [726657.593721] hda: task_in_intr: error=0x04 { AbortedCommand } [726657.593721] ide: failed opcode was: 0xec