WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] XEN 4.0 boot error

On Thu, Apr 08, 2010 at 09:46:49PM +0200, For@ll wrote:
>      >      See here for help:
>      [2][3]http://wiki.xensource.com/xenwiki/XenParavirtOps
>      >
>      >    I have the same problem to boot xen 4.0 on debian lenny 5.0,  under
>      I
>      >    paste a some error:
>      >
>      >    41.017078]   Magic number: 6:876:244
>      >    [   41.061177] md: Waiting for all devices to be available before
>      >    autodetect
>      >    [   41.142579] md: If you don't use raid, use raid=noautodetect
>      >    [   41.211225] md: Autodetecting RAID arrays.
>      >    [   41.260417] md: Scanned 0 and added 0 devices.
>      >    [   41.313729] md: autorun ...
>      >    [   41.347281] md: ... autorun DONE.
>      >    [   41.387150] Root-NFS: No NFS server available, giving up.
>      >    [   41.451921] VFS: Unable to mount root fs via NFS, trying floppy.
>      >    [   41.524664] VFS: Cannot open root device "sda1" or
>      unknown-block(2,0)
> 
>      So the disk was not detected, or did you pass wrong root= parameter?
> 
>      Please post the _full_ log.
> 
>      -- Pasi
> 
> 
>    Hi,
> 
>    This is a longer version dmesg from console redirection ( ipmitool connect
>    to iRMC)
> 

I don't see any disks detected in the log..

Can you please post a boot log on baremetal (non-xen), 
or tell which disk controller has your root disk? what driver it uses on 
baremetal linux? 

-- Pasi


>    [   25.101873] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0
>    pin 16 triggering 1 polarity 1
>    [   25.210426] pci 0000:00:1c.7: PCI INT A -> GSI 16 (level, low) -> IRQ
>    16
>    [   25.290926] NET: Registered protocol family 2
>    [   25.343369] IP route cache hash table entries: 32768 (order: 5, 131072
>    bytes)
>    [   25.429385] TCP established hash table entries: 131072 (order: 8,
>    1048576 bytes)
>    [   25.518783] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>    [   25.598413] TCP: Hash tables configured (established 131072 bind 65536)
>    [   25.677741] TCP reno registered
>    [   25.715586] NET: Registered protocol family 1
>    [   25.767966] kvm: no hardware support
>    [   25.810908] has_svm: not amd
>    [   25.845501] kvm: no hardware support
>    [   25.888606] Simple Boot Flag at 0x50 set to 0x1
>    [   25.946611] Microcode Update Driver: v2.00
>    <[4]tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
>    [   26.040604] Scanning for low memory corruption every 60 seconds
>    [   26.112527] audit: initializing netlink socket (disabled)
>    [   26.179722] type=2000 audit(1270763053.504:1): initialized
>    [   11.184373] highmem bounce pool size: 64 pages
>    [   11.237701] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>    [   11.319190] VFS: Disk quotas dquot_6.5.2
>    [   11.366415] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>    [   11.445284] DLM (built Apr  8 2010 14:55:36) installed
>    [   11.508815] OCFS2 1.5.0
>    [   11.538530] ocfs2: Registered cluster interface o2cb
>    [   11.598381] ocfs2: Registered cluster interface user
>    [   11.657945] OCFS2 Node Manager 1.5.0
>    [   11.701011] OCFS2 DLM 1.5.0
>    [   11.734622] OCFS2 DLMFS 1.5.0
>    [   11.770430] OCFS2 User DLM kernel interface loaded
>    [   11.828680] Slow work thread pool: Starting up
>    [   11.882081] Slow work thread pool: Ready
>    [   11.929163] GFS2 (built Apr  8 2010 14:56:07) installed
>    [   11.991853] msgmni has been set to 1248
>    [   12.039039] alg: No test for stdrng (krng)
>    [   12.088412] Block layer SCSI generic (bsg) driver version 0.4 loaded
>    (major 252)
>    [   12.177207] io scheduler noop registered
>    [   12.224285] io scheduler anticipatory registered
>    [   12.279686] io scheduler deadline registered
>    [   12.330936] io scheduler cfq registered (default)
>    [   12.390106] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>    [   12.457519] ACPI: AC Adapter [PSD] (on-line)
>    [   12.509066] input: Power Button as
>    /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>    [   12.597857] ACPI: Power Button [PWRF]
>    [   12.641975] input: Power Button as
>    /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>    [   12.740153] ACPI: Power Button [PWRB]
>    [   12.784590] ACPI: CPU-1 (power states: C1[C1] C2[C3])
>    [   12.845935] ACPI: CPU-1 (power states: C1[C1] C2[C3])
>    [   12.907366] ACPI: CPU-1 (power states: C1[C1] C2[C3])
>    [   12.968754] ACPI: CPU-1 (power states: C1[C1] C2[C3])
>    [   13.034662] Event-channel device installed.
>    [   13.088923] blktap_device_init: blktap device major 253
>    [   13.151673] blktap_ring_init: blktap ring major: 251
>    [   13.212676] registering netback
>    [   13.260648] hpet_acpi_add: no address or irqs in _CRS
>    [   13.321642] Non-volatile memory driver v1.3
>    [   13.372539] Linux agpgart interface v0.103
>    [   13.422152] [drm] Initialized drm 1.1.0 20060810
>    [   13.477799] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>    ÿ[   13.797361] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>    [   13.872710] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>    [   13.946381] brd: module loaded
>    [   13.985783] loop: module loaded
>    [   14.024058] input: Macintosh mouse button emulation as
>    /devices/virtual/input/input2
>    [   14.118477] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0
>    pin 22 triggering 1 polarity 1
>    [   14.227076] ata_piix 0000:00:1f.2: PCI INT A -> GSI 22 (level, low) ->
>    IRQ 22
>    [   14.312643] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>    [   14.375473] scsi0 : ata_piix
>    [   14.410844] scsi1 : ata_piix
>    [   14.445932] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1870
>    irq 14
>    [   14.529487] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1878
>    irq 15
>    [   14.613055] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0
>    pin 23 triggering 1 polarity 1
>    [   14.721616] ata_piix 0000:00:1f.5: PCI INT B -> GSI 23 (level, low) ->
>    IRQ 23
>    [   14.807293] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>    [   14.870023] scsi2 : ata_piix
>    [   14.905173] scsi3 : ata_piix
>    [   14.940127] ata3: SATA max UDMA/133 cmd 0x18c8 ctl 0x18bc bmdma 0x1890
>    irq 23
>    [   15.025708] ata4: SATA max UDMA/133 cmd 0x18c0 ctl 0x18b8 bmdma 0x1898
>    irq 23
>    [   15.112211] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
>    [   15.189453] Copyright (c) 1999-2006 Intel Corporation.
>    [   30.313754] ata2.00: SATA link down (SStatus 0 SControl 300)
>    [   30.313848] ata2.01: SATA link down (SStatus 0 SControl 300)
>    [   30.326241] ata1.00: SATA link down (SStatus 0 SControl 300)
>    [   30.326268] ata1.01: SATA link down (SStatus 0 SControl 300)
>    [   30.500741] ata4: SATA link down (SStatus 0 SControl 300)
>    [   15.587630] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
>    [   16.373656] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>    [   16.392986] ata3.00: ATAPI: HL-DT-ST DVDRAM GT20N, CW03, max UDMA/133
>    [   16.414991] ata3.00: configured for UDMA/133
>    [   30.751248] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT20N
>    CW03 PQ: 0 ANSI: 5
>    [   30.763236] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2
>    cdda tray
>    [   30.763240] Uniform CD-ROM driver Revision: 3.20
>    [   30.764188] sr 2:0:0:0: Attached scsi generic sg0 type 5
>    [   16.167491] e1000e: Copyright (c) 1999-2008 Intel Corporation.
>    [   16.237533] xen_set_ioapic_routing: irq 17 gsi 17 vector 17 ioapic 0
>    pin 17 triggering 1 polarity 1
>    [   16.346385] e1000e 0000:00:19.0: PCI INT A -> GSI 17 (level, low) ->
>    IRQ 17
>    [   16.429871] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed
>    0xfffffffb
>    [   16.631590] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1)
>    00:40:d0:c0:94:ab
>    [   16.720405] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>    [   16.798930] 0000:00:19.0: eth0: MAC: 9, PHY: 9, PBA No: 313130-032
>    [   16.873209] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0
>    pin 18 triggering 1 polarity 1
>    [   16.981766] e1000e 0000:06:00.0: PCI INT A -> GSI 18 (level, low) ->
>    IRQ 18
>    [   17.151067] 0000:06:00.0: eth1: (PCI Express:2.5GB/s:Width x1)
>    00:40:d0:c0:94:aa
>    [   17.239785] 0000:06:00.0: eth1: Intel(R) PRO/1000 Network Connection
>    [   17.316095] 0000:06:00.0: eth1: MAC: 3, PHY: 8, PBA No: 313132-030
>    [   17.390967] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>    [   17.464089] e100: Copyright(c) 1999-2006 Intel Corporation
>    [   17.530921] sky2 driver version 1.23
>    [   17.575855] console [netcon0] enabled
>    [   17.619813] netconsole: network logging started
>    [   17.674531] Fusion MPT base driver 3.04.10
>    [   17.723728] Copyright (c) 1999-2008 LSI Corporation
>    [   17.782276] Fusion MPT FC Host driver 3.04.10
>    [   17.834877] Fusion MPT misc device (ioctl) driver 3.04.10
>    [   17.900030] mptctl: Registered with Fusion MPT base driver
>    [   17.965842] mptctl: /dev/mptctl @ (major,minor=10,220)
>    [   18.028613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>    [   18.106968] xen_set_ioapic_routing: irq 21 gsi 21 vector 21 ioapic 0
>    pin 21 triggering 1 polarity 1
>    [   18.215560] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 21 (level, low) ->
>    IRQ 21
>    [   18.301142] ehci_hcd 0000:00:1a.0: EHCI Host Controller
>    [   18.364179] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
>    number 1
>    [   18.456986] ehci_hcd 0000:00:1a.0: debug port 2
>    [   18.511435] ehci_hcd 0000:00:1a.0: irq 21, io mem 0xce003000
>    [   18.589288] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>    [   18.658307] usb usb1: New USB device found, idVendor=1d6b,
>    idProduct=0002
>    [   18.739739] usb usb1: New USB device strings: Mfr=3, Product=2,
>    SerialNumber=1
>    [   18.826521] usb usb1: Product: EHCI Host Controller
>    [   18.885035] usb usb1: Manufacturer: Linux 2.6.31.13 ehci_hcd
>    [   18.952915] usb usb1: SerialNumber: 0000:00:1a.0
>    [   19.008822] usb usb1: configuration #1 chosen from 1 choice
>    [   19.076102] hub 1-0:1.0: USB hub found
>    [   19.121247] hub 1-0:1.0: 2 ports detected
>    [   19.169523] xen_set_ioapic_routing: irq 20 gsi 20 vector 20 ioapic 0
>    pin 20 triggering 1 polarity 1
>    [   19.278107] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) ->
>    IRQ 20
>    [   19.363693] ehci_hcd 0000:00:1d.0: EHCI Host Controller
>    [   19.426837] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
>    number 2
>    [   19.519665] ehci_hcd 0000:00:1d.0: debug port 2
>    [   19.574137] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xce004000
>    [   20.413312] usb 1-1: new high speed USB device using ehci_hcd and
>    address 2
>    [   19.760373] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>    [   19.829381] usb usb2: New USB device found, idVendor=1d6b,
>    idProduct=0002
>    [   19.910786] usb usb2: New USB device strings: Mfr=3, Product=2,
>    SerialNumber=1
>    [   19.997491] usb usb2: Product: EHCI Host Controller
>    [   20.056022] usb usb2: Manufacturer: Linux 2.6.31.13 ehci_hcd
>    [   20.123938] usb usb2: SerialNumber: 0000:00:1d.0
>    [   20.179767] usb usb2: configuration #1 chosen from 1 choice
>    [   35.261351] usb 1-1: New USB device found, idVendor=8087,
>    idProduct=0020
>    [   35.261353] usb 1-1: New USB device strings: Mfr=0, Product=0,
>    SerialNumber=0
>    [   35.261696] usb 1-1: configuration #1 chosen from 1 choice
>    [   35.262004] hub 1-1:1.0: USB hub found
>    [   35.262112] hub 1-1:1.0: 6 ports detected
>    [   20.571877] hub 2-0:1.0: USB hub found
>    [   20.616947] hub 2-0:1.0: 2 ports detected
>    [   20.665554] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>    [   20.740168] uhci_hcd: USB Universal Host Controller Interface driver
>    [   20.817277] usbcore: registered new interface driver usblp
>    [   20.883086] Initializing USB Mass Storage driver...
>    [   20.941974] usbcore: registered new interface driver usb-storage
>    [   21.014026] USB Mass Storage support registered.
>    [   36.112936] usb 2-1: new high speed USB device using ehci_hcd and
>    address 2
>    [   21.153280] usbcore: registered new interface driver libusual
>    [   36.228304] usb 2-1: New USB device found, idVendor=8087,
>    idProduct=0020
>    [   36.228307] usb 2-1: New USB device strings: Mfr=0, Product=0,
>    SerialNumber=0
>    [   36.228660] usb 2-1: configuration #1 chosen from 1 choice
>    [   36.228969] hub 2-1:1.0: USB hub found
>    [   36.229070] hub 2-1:1.0: 8 ports detected
>    [   36.495535] usb 2-1.4: new low speed USB device using ehci_hcd and
>    address 3
>    [   36.592902] usb 2-1.4: New USB device found, idVendor=04d9,
>    idProduct=1603
>    [   36.592905] usb 2-1.4: New USB device strings: Mfr=1, Product=2,
>    SerialNumber=0
>    [   36.592908] usb 2-1.4: Product: USB Keyboard
>    [   36.592910] usb 2-1.4: Manufacturer:
>    [   36.593255] usb 2-1.4: configuration #1 chosen from 1 choice
>    [   36.657328] usb 2-1.5: new full speed USB device using ehci_hcd and
>    address 4
>    [   36.735047] usb 2-1.5: New USB device found, idVendor=0000,
>    idProduct=0000
>    [   36.735049] usb 2-1.5: New USB device strings: Mfr=1, Product=2,
>    SerialNumber=3
>    [   36.735052] usb 2-1.5: Product: iRMC USB Device
>    [   36.735054] usb 2-1.5: Manufacturer: Fujitsu
>    [   36.735056] usb 2-1.5: SerialNumber: 600ABC94D3074C
>    [   36.735417] usb 2-1.5: configuration #1 chosen from 1 choice
>    [   22.454959] PNP: No PS/2 controller found. Probing ports directly.
>    [   23.293431] hrtimer: interrupt took 9183132 ns
>    [   22.842002] serio: i8042 KBD port at 0x60,0x64 irq 1
>    [   22.902741] mice: PS/2 mouse device common for all mice
>    [   22.977135] rtc_cmos 00:06: RTC can wake from S4
>    [   23.032918] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>    [   23.106105] rtc0: alarms up to one month, y3k, 114 bytes nvram
>    [   23.176478] xen_allocate_pirq: returning irq 20 for gsi 20
>    [   23.242289] xen_set_ioapic_routing: irq 20 gsi 20 vector 20 ioapic 0
>    pin 20 triggering 1 polarity 1
>    [   23.350973] i801_smbus 0000:00:1f.3: PCI INT D -> GSI 20 (level, low)
>    -> IRQ 20
>    [   23.440784] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
>    initialised: [5]dm-devel@xxxxxxxxxx
>    [   23.542605] cpuidle: using governor ladder
>    [   23.591833] cpuidle: using governor menu
>    [   23.642069] usbcore: registered new interface driver hiddev
>    [   38.781806] input:   USB Keyboard as
>    /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input3
>    [   38.899189] generic-usb 0003:04D9:1603.0001: input,hidraw0: USB HID
>    v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.0-1.4/input0
>    [   39.057332] input:   USB Keyboard as
>    /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input4
>    [   39.174832] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID
>    v1.10 Device [  USB Keyboard] on usb-0000:00:1d.0-1.4/input1
>    [   39.315677] input: Fujitsu iRMC USB Device as
>    /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input5
>    [   39.442738] generic-usb 0003:0000:0000.0003: input,hidraw2: USB HID
>    v1.11 Keyboard [Fujitsu iRMC USB Device] on usb-0000:00:1d.0-1.5/input0
>    [   39.594713] input: Fujitsu iRMC USB Device as
>    /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input6
>    [   39.722047] generic-usb 0003:0000:0000.0004: input,hidraw3: USB HID
>    v1.11 Mouse [Fujitsu iRMC USB Device] on usb-0000:00:1d.0-1.5/input1
>    [   39.869436] usbcore: registered new interface driver usbhid
>    [   39.936280] usbhid: v2.6:USB HID core driver
>    [   39.988359] Advanced Linux Sound Architecture Driver Version 1.0.20.
>    [   40.066220] ALSA device list:
>    [   40.101937]   No soundcards found.
>    [   40.142841] Netfilter messages via NETLINK v0.30.
>    [   40.199352] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>    [   40.273258] ctnetlink v0.93: registering with nfnetlink.
>    [   40.338192] ip_tables: (C) 2000-2006 Netfilter Core Team
>    [   40.402000] TCP cubic registered
>    [   40.440827] Initializing XFRM netlink socket
>    [   40.493211] NET: Registered protocol family 10
>    [   40.549310] ip6_tables: (C) 2000-2006 Netfilter Core Team
>    [   40.614164] IPv6 over IPv4 tunneling driver
>    [   40.666254] NET: Registered protocol family 17
>    [   40.720665] RPC: Registered udp transport module.
>    [   40.777108] RPC: Registered tcp transport module.
>    [   40.834214] SCTP: Hash tables configured (established 65536 bind 65536)
>    [   40.914548] Using IPI No-Shortcut mode
>    [   40.960325] registered taskstats version 1
>    [   41.009654]   Magic number: 6:500:752
>    [   41.053698] tty ttyS3: hash matches
>    [   41.095785] md: Waiting for all devices to be available before
>    autodetect
>    [   41.177190] md: If you don't use raid, use raid=noautodetect
>    [   41.245761] md: Autodetecting RAID arrays.
>    [   41.294919] md: Scanned 0 and added 0 devices.
>    [   41.348234] md: autorun ...
>    [   41.381789] md: ... autorun DONE.
>    [   41.421739] Root-NFS: No NFS server available, giving up.
>    [   41.486540] VFS: Unable to mount root fs via NFS, trying floppy.
>    [   41.559115] VFS: Cannot open root device "sda1" or unknown-block(2,0)
>    [   41.636362] Please append a correct "root=" boot option; here are the
>    available partitions:
>    [   41.736610] 0b00         1048575 sr0 driver: sr
>    [   41.791146] Kernel panic - not syncing: VFS: Unable to mount root fs on
>    unknown-block(2,0)
>    [   41.890337] Pid: 1, comm: swapper Not tainted 2.6.31.13 #2
>    [   41.956135] Call Trace:
>    [   41.985599]  [<c15e8386>] ? printk+0xf/0x11
>    [   42.035826]  [<c15e82ca>] panic+0x39/0xe6
>    [   42.083950]  [<c191ec2d>] mount_block_root+0x163/0x172
>    [   42.145673]  [<c1002930>] ? hypercall_page+0x930/0x1005
>    [   42.208414]  [<c191eca2>] mount_root+0x66/0x84
>    [   42.261803]  [<c191ee05>] prepare_namespace+0x145/0x16c
>    [   42.324489]  [<c191e34f>] kernel_init+0x16e/0x17d
>    [   42.380929]  [<c191e1e1>] ? kernel_init+0x0/0x17d
>    [   42.437369]  [<c1028d37>] kernel_thread_helper+0x7/0x10
> 
>    For@ll
> 
> References
> 
>    Visible links
>    1. mailto:pasik@xxxxxx
>    2. mailto:pasik@xxxxxx
>    3. http://wiki.xensource.com/xenwiki/XenParavirtOps
>    4. mailto:tigran@xxxxxxxxxxxxxxxxxxxx
>    5. mailto:dm-devel@xxxxxxxxxx

> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users