WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOA

To: Pasi Kärkkäinen <pasik@xxxxxx>
Subject: Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9
From: kishore kumar <bodkekumar@xxxxxxxxx>
Date: Thu, 18 Mar 2010 13:23:41 -0700
Cc: Jeremy Fitzhardinge <jeremy@xxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx
Delivery-date: Thu, 18 Mar 2010 13:26:48 -0700
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:in-reply-to:references :date:message-id:subject:from:to:cc:content-type; bh=Tsbx8/ICMrBRMjeaUgkaEK7p+4x4NLnkmLOMDS/Wx48=; b=CPiJmA7LtZabQ6F4ISaL7/3M7/9QGlRJbGQQ+Uy9q4XK/P2PIWVbuof2WWpw2tYCuo GCt8XFx112SbuD8Rbr5ab4oG1caKB8u/ETtqAnHmjnOChb8blXcR5va54dGkmLHX+dTp MymO4t75jJg9IuGPvfX+XJccY+YqRJyADu3XA=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; b=IXpPQ/cqZElPp3GBspBU3npujMDPn3/FfafArhZz/MIic+9Uq4Lu8AEdPbxCd7AWGl D1guHuV5y+beoMNf6qLAMV4unE6ID8A5408Bxybw/zVZU4mutSKWShPONMsyvaL2HWWr xAfMLyr5IKCD/qvXbu3QVL4giUP4rUqNd1tbQ=
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <20100318193131.GW1878@xxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <20100316212928.GA1878@xxxxxxxxxxx> <20100316220353.GC1878@xxxxxxxxxxx> <9f975f341003161522q7786a910mfe65e79d937bb03@xxxxxxxxxxxxxx> <20100316222927.GD1878@xxxxxxxxxxx> <9f975f341003161540l2ff1404ft2a6698d0a8738348@xxxxxxxxxxxxxx> <20100316231804.GE1878@xxxxxxxxxxx> <9f975f341003171520t5d609ae6r9908cc4abb22ff5f@xxxxxxxxxxxxxx> <20100318161518.GN1878@xxxxxxxxxxx> <9f975f341003181116w3501badar59252aba40adae40@xxxxxxxxxxxxxx> <20100318193131.GW1878@xxxxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
pvdisplay does not work in my RHEL machine.
 
I did  pvscan.
below is the output.
 
PV /dev/sda2 VG VolGroup01 lvm2 [232.78 GB / 0 free]

Total: 1 [232.78 GB] / in use: 1 [232.78 GB] / in no VG: 0 [0 ]



On Thu, Mar 18, 2010 at 12:31 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
On Thu, Mar 18, 2010 at 11:16:26AM -0700, kishore kumar wrote:
>    I did the below steps for pvops dom 0 kernel.
>
>    make menuconfig
>    make bzImage
>    make modules
>    make modules_install
>    cp -a .config /boot/config-2.6.32.10
>    cp -a System.map /boot/System.map-2.6.32.10
>    cp -a arch/x86/boot/bzImage /boot/vmlinuz-2.6.32.10
>    /sbin/mkinitrd -f --builtin=ahci /boot/initrd-2.6.32.10.img 2.6.32.10
>    I tried root=/dev/VolGroup01/LogVol00 .
>

Ok.

Please run "pvdisplay" to see which actual partition is the LVM PV for your
volume group.

Also if you're running Fedora 12 you could try generating an initrd image
with dracut instead of mkinitrd.

-- Pasi


>
>    On Thu, Mar 18, 2010 at 9:15 AM, Pasi Kärkkäinen <[1]pasik@xxxxxx> wrote:
>
>      On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar wrote:
>      >    Here is the output of df -h and cat /etc/fstab of my machine.
>      >
>
>      Did you try both root=/dev/mapper/VolGroup01-LogVol00 and
>      root=/dev/VolGroup01/LogVol00 arguments for the dom0 kernel?
>
>      How did you generate the initrd image for the dom0 kernel?
>
>      Anyway this sounds like a grub.conf or initrd problem, not Xen or pvops
>      dom0 kernel kernel problem.
>
>      -- Pasi
>
>      >    Please let me know your thoughts.
>      >
>      >    [root@localhost kishore]# df -h
>      >
>      >    Filesystem Size Used Avail Use% Mounted on
>      >
>      >    /dev/mapper/VolGroup01-LogVol00
>      >
>      >                                        223G 29G 182G 14% /
>      >
>      >    /dev/sda1 99M 81M 13M 87% /boot
>      >
>      >    tmpfs 757M 0 757M 0% /dev/shm
>      >
>      >    [root@localhost kishore]# cat /etc/fstab
>      >
>      >    /dev/VolGroup01/LogVol00 / ext3 defaults 1 1
>      >
>      >    LABEL=/boot /boot ext3 defaults 1 2
>      >
>      >    tmpfs /dev/shm tmpfs defaults 0 0
>      >
>      >    devpts /dev/pts devpts gid=5,mode=620 0 0
>      >
>      >    sysfs /sys sysfs defaults 0 0
>      >
>      >    proc /proc proc defaults 0 0
>      >
>      >    /dev/VolGroup01/LogVol01 swap swap defaults 0 0
>      >
>      >    [root@localhost kishore]#
>      >
>      >    On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen
>      <[1][2]pasik@xxxxxx> wrote:
>      >
>      >      On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar wrote:
>      >      >    I am not sure.  Can you please let me know how to check
>      this? any
>      >      command
>      >      >    ??
>      >
>      >      well simple "df -h" will show it. and also "cat /etc/fstab".
>      >      You can also check it from your grub configuration.. from the
>      working
>      >      baremetal (non-Xen) entry.
>      >
>      >      -- Pasi
>      >      >
>      >      >    On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen
>      >      <[1][2][3]pasik@xxxxxx> wrote:
>      >      >
>      >      >      On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar
>      wrote:
>      >      >      >    attached  is the log captured in with the word
>      document .
>      >      >      >
>      >      >
>      >      >      Scanning logical volumes
>      >      >       Reading all physical volumes.  This may take a while...
>      >      >      Activating logical volumes
>      >      >       Volume group "VolGroup01" not found
>      >      >      Trying to resume from /dev/VolGroup01/LogVol01
>      >      >      Unable to access resume device (/dev/VolGroup01/LogVol01)
>      >      >      Creating root device.
>      >      >      Mounting root filesystem.
>      >      >      mount: could not find filesystem '/dev/root'
>      >      >      Setting up other filesystems.
>      >      >      Setting up new root fs
>      >      >      setuproot: moving /dev failed: No such file or directory
>      >      >      no fstab.sys, mounting internal defaults
>      >      >      setuproot: error mounting /proc: No such file or directory
>      >      >      setuproot: error mounting /sys: No such file or directory
>      >      >      Switching to new root and running init.
>      >      >      unmounting old /dev
>      >      >      unmounting old /proc
>      >      >      unmounting old /sys
>      >      >      switchroot: mount failed: No such file or directory
>      >      >      init used greatest stack depth: 4088 bytes left
>      >      >      Kernel panic - not syncing: Attempted to kill init!
>      >      >
>      >      >      So it seems it gets all the way to executing the initrd
>      image,
>      >      >      which then fails to mount the root fs.
>      >      >
>      >      >      Earlier in the log:
>      >      >      ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>      >      >      ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max
>      UDMA/133
>      >      >      ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth
>      31/32), AA
>      >      >      ata1.00: configured for UDMA/133
>      >      >      scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDT72102
>      STBO
>      >      PQ: 0
>      >      >      ANSI: 5
>      >      >      sd 0:0:0:0: Attached scsi generic sg0 type 0
>      >      >      sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250
>      GB/232
>      >      GiB)
>      >      >      sd 0:0:0:0: [sda] Write Protect is off
>      >      >      sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>      >      >      sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>      enabled,
>      >      doesn't
>      >      >      support DPO or FUA
>      >      >       sda: sda1 sda2
>      >      >      sd 0:0:0:0: [sda] Attached SCSI disk
>      >      >
>      >      >      so /dev/sda was detected. Is your root lvm volume on
>      /dev/sda ?
>      >      >      Is /dev/VolGroup01/LogVol01 really your root fs?
>      >      >
>      >      >      -- Pasi
>      >      >
>      >      >      >
>      >      >      >
>      >      >      >    On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen
>      >      >      <[1][2][3][4]pasik@xxxxxx> wrote:
>      >      >      >
>      >      >      >      On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore
>      kumar
>      >      wrote:
>      >      >      >      >    Please find the attached log file after fixing
>      the
>      >      dom 0
>      >      >      kernel cmd
>      >      >      >      line
>      >      >      >      >    as below
>      >      >      >      >
>      >      >      >      >    ro root=/dev/VolGroup01/LogVol00 console=hvc0
>      >      >      earlyprintk=xen
>      >      >      >      nomodeset
>      >      >      >      >
>      >      >      >
>      >      >      >      There's something wrong with the log, the dom0
>      kernel
>      >      parts are
>      >      >      all on
>      >      >      >      one line..
>      >      >      >      It's really difficult to read it.
>      >      >      >
>      >      >      >      -- Pasi
>      >      >      >
>      >      >      >      >    Thanks
>      >      >      >      >
>      >      >      >      >
>      >      >      >      >    On Tue, Mar 16, 2010 at 2:29 PM, Pasi
>      Kärkkäinen
>      >      >      >      <[1][2][3][4][5]pasik@xxxxxx> wrote:
>      >      >      >      >
>      >      >      >      >      On Tue, Mar 16, 2010 at 02:16:22PM -0700,
>      kishore
>      >      kumar
>      >      >      wrote:
>      >      >      >      >      >    I did below steps.
>      >      >      >      >      >
>      >      >      >      >      >
>      >      >      >      >      >     I pulled DOM 0 kernel from
>      >      >      >      >      >    git clone
>      >      >      >      >
>      >      >      >
>      >      >
>      >
>      git://[1][2][3][4][5][6]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >      >      >      >      >    linux-2.6-xen
>      >      >      >      >      >
>      >      >      >      >      >    cd linux-2.6-xen
>      >      >      >      >      >
>      >      >      >      >      >    make clean
>      >      >      >      >      >
>      >      >      >      >      >    cp -a .config .config-old
>      >      >      >      >      >
>      >      >      >      >      >    wget -O .config
>      >      >      >      >      >
>      >      >      >      >
>      >      >      >
>      >      >
>      >
>       [2][3][4][5][6][7]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >      >      >      >      >
>      >      >      >      >      >    make oldconfig
>      >      >      >      >      >
>      >      >      >      >      >    make bzImage
>      >      >      >      >      >
>      >      >      >      >      >    make modules
>      >      >      >      >      >
>      >      >      >      >      >    make modules_install
>      >      >      >      >      >
>      >      >      >      >      >    cp -a .config /boot/config-2.6.32.9
>      >      >      >      >      >
>      >      >      >      >      >    cp -a System.map
>      /boot/System.map-2.6.32.9
>      >      >      >      >      >
>      >      >      >      >      >    cp -a arch/x86/boot/bzImage
>      >      /boot/vmlinuz-2.6.32.9
>      >      >      >      >      >
>      >      >      >      >      >    and modified the grub.conf as below
>      >      >      >      >      >
>      >      >      >      >      >
>      >      >      >      >      >    Root(hd0,0)
>      >      >      >      >      >
>      >      >      >      >      >     kernel /xen.gz console=vga,com1
>      >      com1=115200,8n1
>      >      >      msi=1
>      >      >      >      iommu=1
>      >      >      >      >      >
>      >      >      >      >      >     module /vmlinuz-2.6.32.9 ro
>      >      >      root=/dev/VolGroup01/LogVo100
>      >      >      >       rhgb
>      >      >      >      >      quiet
>      >      >      >      >      >
>      >      >      >      >      >     module /initrd-2.6.32.9.img
>      >      >      >      >      >
>      >      >      >      >      >
>      >      >      >      >      >    and rebooted the machine.  Then It
>      booted with
>      >      some
>      >      >      xen
>      >      >      >      messages
>      >      >      >      >      and
>      >      >      >      >      >    stopped.  Those were the messages
>      captured
>      >      from
>      >      >      serial
>      >      >      >      console.
>      >      >      >      >      >
>      >      >      >      >      >    Please let me know if I did something
>      wrong
>      >      here.
>      >      >      >      >      >
>      >      >      >      >
>      >      >      >      >      Please fix the kernel cmdline based on my
>      earlier
>      >      email,
>      >      >      and
>      >      >      >      capture and
>      >      >      >      >      post the
>      >      >      >      >      serial console log again!
>      >      >      >      >
>      >      >      >      >      -- Pasi
>      >      >      >      >      >
>      >      >      >      >      >
>      >      >      >      >      >    On Tue, Mar 16, 2010 at 1:20 PM, Pasi
>      >      Kärkkäinen
>      >      >      >      >      <[3][4][5][6][7][8]pasik@xxxxxx> wrote:
>      >      >      >      >      >
>      >      >      >      >      >      On Tue, Mar 16, 2010 at 01:16:28PM
>      -0700,
>      >      Jeremy
>      >      >      >      Fitzhardinge
>      >      >      >      >      wrote:
>      >      >      >      >      >      > On 03/16/2010 12:48 PM, Pasi
>      Kärkkäinen
>      >      wrote:
>      >      >      >      >      >      >> On Tue, Mar 16, 2010 at 09:43:44PM
>      +0200,
>      >      Pasi
>      >      >      >      Kärkkäinen
>      >      >      >      >      wrote:
>      >      >      >      >      >      >>
>      >      >      >      >      >      >>> On Tue, Mar 16, 2010 at
>      10:32:17AM
>      >      -0700,
>      >      >      kishore
>      >      >      >      kumar
>      >      >      >      >      wrote:
>      >      >      >      >      >      >>>
>      >      >      >      >      >      >>>>     Attached is the output
>      captured
>      >      from
>      >      >      serial
>      >      >      >      console.
>      >      >      >      >      >      >>>>
>      >      >      >      >      >      >>>>     Machine does not boot after
>      >      compiling xen
>      >      >      3.4.3
>      >      >      >      with
>      >      >      >      >      pv_ops dom
>      >      >      >      >      >      0 kernel.
>      >      >      >      >      >      >>>>
>      >      >      >      >      >      >>>>     Please let me know what is
>      going
>      >      wrong
>      >      >      here.
>      >      >      >      >      >      >>>>
>      >      >      >      >      >      >>>>
>      >      >      >      >      >      >>> Ok this looks like a bug that is
>      already
>      >      being
>      >      >      sorted
>      >      >      >      out on
>      >      >      >      >      >      xen-devel mailinglist.
>      >      >      >      >      >      >>> I added CC to xen-devel.
>      >      >      >      >      >      >>>
>      >      >      >      >      >      >>>
>      >      >      >      >      >      >>
>      >      >      >      >      >      >
>      >      >      >      >      >      > Those messages are not a problem in
>      >      themselves,
>      >      >      but the
>      >      >      >      related
>      >      >      >      >      >      problem
>      >      >      >      >      >      > is believed to be fixed in current
>      >      >      xen/stable-2.6.32.x.
>      >      >      >       It
>      >      >      >      >      looks like
>      >      >      >      >      >      > the output stops there because the
>      Xen
>      >      console
>      >      >      isn't set
>      >      >      >      up
>      >      >      >      >      properly
>      >      >      >      >      >      for
>      >      >      >      >      >      > some reason.
>      >      >      >      >      >      >
>      >      >      >      >      >
>      >      >      >      >      >      Yeah, remove "rhgb quiet" from the
>      options..
>      >      the
>      >      >      dom0
>      >      >      >      kernel
>      >      >      >      >      cmdline
>      >      >      >      >      >      should be like this:
>      >      >      >      >      >      ro root=/dev/VolGroup01/LogVol00
>      >      console=hvc0
>      >      >      >      earlyprintk=xen
>      >      >      >      >      nomodeset
>      >      >      >      >      >      -- Pasi
>      >      >      >      >      >
>      >      >      >      >      > References
>      >      >      >      >      >
>      >      >      >      >      >    Visible links
>      >      >      >      >      >    1.
>      >      >      >
>      >      >
>      >
>       [5][6][7][8][9]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >      >      >      >      >    2.
>      >      >      >      >
>      >      >      >
>      >      >
>      >
>      [6][7][8][9][10]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >      >      >      >      >    3. mailto:[7][8][9][10][11]pasik@xxxxxx
>      >      >      >      >
>      >      >      >      > References
>      >      >      >      >
>      >      >      >      >    Visible links
>      >      >      >      >    1. mailto:[9][10][11][12]pasik@xxxxxx
>      >      >      >      >    2.
>      >      >      >
>      >      >
>      >
>       [10][11][12][13]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >      >      >      >    3.
>      >      >      >
>      >      >
>      >
>       [11][12][13][14]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >      >      >      >    4. mailto:[12][13][14][15]pasik@xxxxxx
>      >      >      >      >    5.
>      >      >      >
>      >      >
>      >
>       [13][14][15][16]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>      >      >      >      >    6.
>      >      >      >
>      >      >
>      >
>       [14][15][16][17]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>      >      >      >      >    7. mailto:[15][16][17][18]pasik@xxxxxx
>      >      >      >      > Asserting Post complete GPIO!!!
>      >      >      >      > Transfer control to CSM 16-bit binary for legacy
>      boot
>      >      >      >      >  __  __            _____ _  _    _____
>        _  _
>      >      >      >      >  \ \/ /___ _ __   |___ /| || |  |___ /    _ __
>      ___| || |
>      >          _
>      >      >      __  _
>      >      >      >      __ ___
>      >      >      >      >   \  // _ \ '_ \    |_ \| || |_   |_ \ __| '__/
>      __| ||
>      >      |_ __|
>      >      >      '_ \|
>      >      >      >      '__/ _ \
>      >      >      >      >   /  \  __/ | | |  ___) |__   _| ___) |__| | |
>      (__|__
>      >      _|__|
>      >      >      |_) | |
>      >      >      >      |  __/
>      >      >      >      >  /_/\_\___|_| |_| |____(_) |_|(_)____/   |_|
>       \___|  |_|
>      >         |
>      >      >      .__/|_|
>      >      >      >       \___|
>      >      >      >      >
>      >          |_|
>      >      >      >      > (XEN) Xen version 3.4.3-rc4-pre
>      (kishore@localdomain)
>      >      (gcc
>      >      >      version
>      >      >      >      4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15
>      13:44:31 PDT
>      >      2010
>      >      >      >      > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010
>      +0000
>      >      >      >      19924:6e72f8c3c017
>      >      >      >      > (XEN) Command line: console=vga,com1
>      com1=115200,8n1
>      >      msi=1
>      >      >      iommu=1
>      >      >      >      > (XEN) Video information:
>      >      >      >      > (XEN)  VGA is text mode 80x25, font 8x16
>      >      >      >      > (XEN)  VBE/DDC methods: none; EDID transfer time:
>      0
>      >      seconds
>      >      >      >      > (XEN)  EDID info not retrieved because no DDC
>      retrieval
>      >      method
>      >      >      >      detected
>      >      >      >      > (XEN) Disc information:
>      >      >      >      > (XEN)  Found 1 MBR signatures
>      >      >      >      > (XEN)  Found 1 EDD information structures
>      >      >      >      > (XEN) Xen-e820 RAM map:
>      >      >      >      > (XEN)  0000000000000000 - 000000000009d000
>      (usable)
>      >      >      >      > (XEN)  000000000009d000 - 00000000000a0000
>      (reserved)
>      >      >      >      > (XEN)  00000000000e0000 - 0000000000100000
>      (reserved)
>      >      >      >      > (XEN)  0000000000100000 - 000000006d597000
>      (usable)
>      >      >      >      > (XEN)  000000006d597000 - 000000006d686000
>      (reserved)
>      >      >      >      > (XEN)  000000006d686000 - 000000006f598000
>      (usable)
>      >      >      >      > (XEN)  000000006f598000 - 000000006f59a000
>      (reserved)
>      >      >      >      > (XEN)  000000006f59a000 - 000000006f5af000 (ACPI
>      NVS)
>      >      >      >      > (XEN)  000000006f5af000 - 000000006f5d9000
>      (reserved)
>      >      >      >      > (XEN)  000000006f5d9000 - 000000006f5f9000 (ACPI
>      data)
>      >      >      >      > (XEN)  000000006f5f9000 - 000000006f6df000 (ACPI
>      NVS)
>      >      >      >      > (XEN)  000000006f6df000 - 000000006f700000 (ACPI
>      data)
>      >      >      >      > (XEN)  000000006f700000 - 0000000080000000
>      (reserved)
>      >      >      >      > (XEN)  00000000a0000000 - 00000000b0000000
>      (reserved)
>      >      >      >      > (XEN)  00000000fc000000 - 00000000fd000000
>      (reserved)
>      >      >      >      > (XEN)  00000000fed1c000 - 00000000fed20000
>      (reserved)
>      >      >      >      > (XEN)  00000000ffc00000 - 0000000100000000
>      (reserved)
>      >      >      >      > (XEN) System RAM: 1780MB (1823000kB)
>      >      >      >      > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL )
>      >      >      >      > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL  THRLY
>      >        0
>      >      >      >      1000013)
>      >      >      >      > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL  THRLY
>      >        0
>      >      >      MSFT
>      >      >      >       100000D)
>      >      >      >      > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL  THRLY
>      >        3
>      >      >      MSFT
>      >      >      >       100000D)
>      >      >      >      > (XEN) ACPI: FACS 6F5F9000, 0040
>      >      >      >      > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL  THRLY
>      >        0
>      >      >      MSFT
>      >      >      >       100000D)
>      >      >      >      > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL  THRLY
>      >        1
>      >      >      MSFT
>      >      >      >       100000D)
>      >      >      >      > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL  THRLY
>      >        1
>      >      >      MSFT
>      >      >      >       100000D)
>      >      >      >      > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL  THRLY
>      >        1
>      >      >      MSFT
>      >      >      >       100000D)
>      >      >      >      > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL  THRLY
>      >        0
>      >      >      MSFT
>      >      >      >       100000D)
>      >      >      >      > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1  INTEL SSDT
>       PM
>      >      4000
>      >      >      INTL
>      >      >      >      20061109)
>      >      >      >      > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL  THRLY
>      >        1
>      >      >      MSFT
>      >      >      >       100000D)
>      >      >      >      > (XEN) Domain heap initialised
>      >      >      >      > (XEN) Processor #0 6:12 APIC version 21
>      >      >      >      > (XEN) Processor #2 6:12 APIC version 21
>      >      >      >      > (XEN) Processor #4 6:12 APIC version 21
>      >      >      >      > (XEN) Processor #16 6:12 APIC version 21
>      >      >      >      > (XEN) Processor #18 6:12 APIC version 21
>      >      >      >      > (XEN) Processor #20 6:12 APIC version 21
>      >      >      >      > (XEN) Processor #1 6:12 APIC version 21
>      >      >      >      > (XEN) Processor #3 6:12 APIC version 21
>      >      >      >      > (XEN) Processor #5 6:12 APIC version 21
>      >      >      >      > (XEN) Processor #17 6:12 APIC version 21
>      >      >      >      > (XEN) Processor #19 6:12 APIC version 21
>      >      >      >      > (XEN) Processor #21 6:12 APIC version 21
>      >      >      >      > (XEN) IOAPIC[0]: apic_id 8, version 32, address
>      >      0xfec00000, GSI
>      >      >      0-23
>      >      >      >      > (XEN) IOAPIC[1]: apic_id 9, version 32, address
>      >      0xfec90000, GSI
>      >      >      24-47
>      >      >      >      > (XEN) Enabling APIC mode:  Phys.  Using 2 I/O
>      APICs
>      >      >      >      > (XEN) Intel VT-d DMAR tables have been parsed.
>      >      >      >      > (XEN) Using scheduler: SMP Credit Scheduler
>      (credit)
>      >      >      >      > (XEN) Detected 3200.207 MHz processor.
>      >      >      >      > (XEN) VMX: Supported advanced features:
>      >      >      >      > (XEN)  - APIC MMIO access virtualisation
>      >      >      >      > (XEN)  - APIC TPR shadow
>      >      >      >      > (XEN)  - Extended Page Tables (EPT)
>      >      >      >      > (XEN)  - Virtual-Processor Identifiers (VPID)
>      >      >      >      > (XEN)  - Virtual NMI
>      >      >      >      > (XEN)  - MSR direct-access bitmap
>      >      >      >      > (XEN) VMX: EPT is available.
>      >      >      >      > (XEN) VMX: VPID is available.
>      >      >      >      > (XEN) HVM: VMX enabled
>      >      >      >      > (XEN) HVM: Hardware Assisted Paging detected.
>      >      >      >      > (XEN) CPU0: Intel Genuine Intel(R) CPU
>        000
>      >       @
>      >      >      3.20GHz
>      >      >      >      stepping 00
>      >      >      >      > (XEN) Booting processor 1/2 eip 88000
>      >      >      >      > (XEN) CPU1: Intel Genuine Intel(R) CPU
>        000
>      >       @
>      >      >      3.20GHz
>      >      >      >      stepping 00
>      >      >      >      > (XEN) Booting processor 2/4 eip 88000
>      >      >      >      > (XEN) CPU2: Intel Genuine Intel(R) CPU
>        000
>      >       @
>      >      >      3.20GHz
>      >      >      >      stepping 00
>      >      >      >      > (XEN) Booting processor 3/16 eip 88000
>      >      >      >      > (XEN) CPU3: Intel Genuine Intel(R) CPU
>        000
>      >       @
>      >      >      3.20GHz
>      >      >      >      stepping 00
>      >      >      >      > (XEN) Booting processor 4/18 eip 88000
>      >      >      >      > (XEN) CPU4: Intel Genuine Intel(R) CPU
>        000
>      >       @
>      >      >      3.20GHz
>      >      >      >      stepping 00
>      >      >      >      > (XEN) Booting processor 5/20 eip 88000
>      >      >      >      > (XEN) CPU5: Intel Genuine Intel(R) CPU
>        000
>      >       @
>      >      >      3.20GHz
>      >      >      >      stepping 00
>      >      >      >      > (XEN) Booting processor 6/1 eip 88000
>      >      >      >      > (XEN) CPU6: Intel Genuine Intel(R) CPU
>        000
>      >       @
>      >      >      3.20GHz
>      >      >      >      stepping 00
>      >      >      >      > (XEN) Booting processor 7/3 eip 88000
>      >      >      >      > (XEN) CPU7: Intel Genuine Intel(R) CPU
>        000
>      >       @
>      >      >      3.20GHz
>      >      >      >      stepping 00
>      >      >      >      > (XEN) Booting processor 8/5 eip 88000
>      >      >      >      > (XEN) CPU8: Intel Genuine Intel(R) CPU
>        000
>      >       @
>      >      >      3.20GHz
>      >      >      >      stepping 00
>      >      >      >      > (XEN) Booting processor 9/17 eip 88000
>      >      >      >      > (XEN) CPU9: Intel Genuine Intel(R) CPU
>        000
>      >       @
>      >      >      3.20GHz
>      >      >      >      stepping 00
>      >      >      >      > (XEN) Booting processor 10/19 eip 88000
>      >      >      >      > (XEN) CPU10: Intel Genuine Intel(R) CPU
>        000
>      >       @
>      >      >      3.20GHz
>      >      >      >      stepping 00
>      >      >      >      > (XEN) Booting processor 11/21 eip 88000
>      >      >      >      > (XEN) CPU11: Intel Genuine Intel(R) CPU
>        000
>      >       @
>      >      >      3.20GHz
>      >      >      >      stepping 00
>      >      >      >      > (XEN) Total of 12 processors activated.
>      >      >      >      > (XEN) ENABLING IO-APIC IRQs
>      >      >      >      > (XEN)  -> Using new ACK method
>      >      >      >      > (XEN) checking TSC synchronization across 12
>      CPUs:
>      >      passed.
>      >      >      >      > (XEN) Platform timer is 14.318MHz HPET
>      >      >      >      > ?(XEN) Brought up 12 CPUs
>      >      >      >      > (XEN) Intel VT-d Snoop Control supported.
>      >      >      >      > (XEN) Intel VT-d DMA Passthrough not supported.
>      >      >      >      > (XEN) Intel VT-d Queued Invalidation supported.
>      >      >      >      > (XEN) Intel VT-d Interrupt Remapping supported.
>      >      >      >      > (XEN) I/O virtualisation enabled
>      >      >      >      > (XEN) I/O virtualisation for PV guests disabled
>      >      >      >      > (XEN) xenoprof: Initialization failed. Intel
>      processor
>      >      model 44
>      >      >      for P6
>      >      >      >      class family is not supported
>      >      >      >      > (XEN) *** LOADING DOMAIN 0 ***
>      >      >      >      > (XEN)  Xen  kernel: 64-bit, lsb, compat32
>      >      >      >      > (XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr
>      0x1000000 ->
>      >      >      0x26bb000
>      >      >      >      > (XEN) PHYSICAL MEMORY ARRANGEMENT:
>      >      >      >      > (XEN)  Dom0 alloc.:
>      0000000064000000->0000000068000000
>      >      >      (404490 pages
>      >      >      >      to be allocated)
>      >      >      >      > (XEN) VIRTUAL MEMORY ARRANGEMENT:
>      >      >      >      > (XEN)  Loaded kernel:
>      ffffffff81000000->ffffffff826bb000
>      >      >      >      > (XEN)  Init. ramdisk:
>      ffffffff826bb000->ffffffff82d0d800
>      >      >      >      > (XEN)  Phys-Mach map:
>      ffffffff82d0e000->ffffffff83044050
>      >      >      >      > (XEN)  Start info:
>       ffffffff83045000->ffffffff830454b4
>      >      >      >      > (XEN)  Page tables:
>      ffffffff83046000->ffffffff83063000
>      >      >      >      > (XEN)  Boot stack:
>       ffffffff83063000->ffffffff83064000
>      >      >      >      > (XEN)  TOTAL:
>      ffffffff80000000->ffffffff83400000
>      >      >      >      > (XEN)  ENTRY ADDRESS: ffffffff819c1200
>      >      >      >      > (XEN) Dom0 has maximum 12 VCPUs
>      >      >      >      > (XEN) Scrubbing Free RAM: .done.
>      >      >      >      > (XEN) Xen trace buffers: disabled
>      >      >      >      > (XEN) Std. Loglevel: Errors and warnings
>      >      >      >      > (XEN) Guest Loglevel: Nothing (Rate-limited:
>      Errors and
>      >      >      warnings)
>      >      >      >      > (XEN) Xen is relinquishing VGA console.
>      >      >      >      > (XEN) *** Serial input -> DOM0 (type 'CTRL-a'
>      three
>      >      times to
>      >      >      switch
>      >      >      >      input to Xen)
>      >      >      >      > (XEN) Freed 128kB init memory.
>      >      >      >      > mapping kernel into physical memory
>      >      >      >      > Xen: setup ISA identity maps
>      >      >      >      > about to get started...
>      >      >      >      > Initializing cgroup subsys cpuset
>      >      >      >      > Initializing cgroup subsys cpu
>      >      >      >      > Linux version 2.6.32.9
>      (kishore@xxxxxxxxxxxxxxxxxxxxx)
>      >      (gcc
>      >      >      version
>      >      >      >      4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar
>      15
>      >      15:16:28 PDT
>      >      >      2010
>      >      >      >      > Command line: ro root=/dev/VolGroup01/LogVol00
>      >      console=hvc0
>      >      >      >      earlyprintk=xen nomodeset
>      >      >      >      > KERNEL supported cpus:
>      >      >      >      >   Intel GenuineIntel
>      >      >      >      >   AMD AuthenticAMD
>      >      >      >      >   Centaur CentaurHauls
>      >      >      >      > BIOS-provided physical RAM map:
>      >      >      >      >  Xen: 0000000000000000 - 000000000009d000
>      (usable)
>      >      >      >      >  Xen: 000000000009d000 - 0000000000100000
>      (reserved)
>      >      >      >      >  Xen: 0000000000100000 - 0000000066c0a000
>      (usable)
>      >      >      >      >  Xen: 000000006d597000 - 000000006d686000
>      (reserved)
>      >      >      >      >  Xen: 000000006f598000 - 000000006f59a000
>      (reserved)
>      >      >      >      >  Xen: 000000006f59a000 - 000000006f5af000 (ACPI
>      NVS)
>      >      >      >      >  Xen: 000000006f5af000 - 000000006f5d9000
>      (reserved)
>      >      >      >      >  Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI
>      data)
>      >      >      >      >  Xen: 000000006f5f9000 - 000000006f6df000 (ACPI
>      NVS)
>      >      >      >      >  Xen: 000000006f6df000 - 000000006f700000 (ACPI
>      data)
>      >      >      >      >  Xen: 000000006f700000 - 0000000080000000
>      (reserved)
>      >      >      >      >  Xen: 00000000a0000000 - 00000000b0000000
>      (reserved)
>      >      >      >      >  Xen: 00000000fc000000 - 00000000fd000000
>      (reserved)
>      >      >      >      >  Xen: 00000000fed1c000 - 00000000fed20000
>      (reserved)
>      >      >      >      >  Xen: 00000000ffc00000 - 0000000100000000
>      (reserved)
>      >      >      >      > bootconsole [xenboot0] enabled
>      >      >      >      > DMI 2.4 present.
>      >      >      >      > last_pfn = 0x66c0a max_arch_pfn = 0x400000000
>      >      >      >      > init_memory_mapping:
>      0000000000000000-0000000066c0a000
>      >      >      >      > RAMDISK: 026bb000 - 02d0d800
>      >      >      >      > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL )
>      >      >      >      > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL
>       THRLY
>      >       00000000
>      >      >      >       01000013)
>      >      >      >      > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL
>       THRLY
>      >       00000000
>      >      >      MSFT
>      >      >      >      0100000D)
>      >      >      >      > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL
>       THRLY
>      >       00000003
>      >      >      MSFT
>      >      >      >      0100000D)
>      >      >      >      > ACPI: FACS 000000006f5f9000 00040
>      >      >      >      > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL
>       THRLY
>      >       00000000
>      >      >      MSFT
>      >      >      >      0100000D)
>      >      >      >      > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL
>       THRLY
>      >       00000001
>      >      >      MSFT
>      >      >      >      0100000D)
>      >      >      >      > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL
>       THRLY
>      >       00000001
>      >      >      MSFT
>      >      >      >      0100000D)
>      >      >      >      > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL
>       THRLY
>      >       00000001
>      >      >      MSFT
>      >      >      >      0100000D)
>      >      >      >      > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL
>       THRLY
>      >       00000000
>      >      >      MSFT
>      >      >      >      0100000D)
>      >      >      >      > ACPI: SSDT 000000006f5d9000 1FDDC (v01  INTEL
>      SSDT  PM
>      >      00004000
>      >      >      INTL
>      >      >      >      20061109)
>      >      >      >      > ACPI:      000000006f6ee000 001D0 (v01 INTEL
>       THRLY
>      >       00000001
>      >      >      MSFT
>      >      >      >      0100000D)
>      >      >      >      > No NUMA configuration found
>      >      >      >      > Faking a node at
>      0000000000000000-0000000066c0a000
>      >      >      >      > Bootmem setup node 0
>      0000000000000000-0000000066c0a000
>      >      >      >      >   NODE_DATA [0000000000008000 - 000000000001ffff]
>      >      >      >      >   bootmap [0000000000020000 -  000000000002cd87]
>      pages d
>      >      >      >      > (9 early reservations) ==> bootmem [0000000000 -
>      >      0066c0a000]
>      >      >      >      >   #0 [0000000000 - 0000001000]   BIOS data page
>      ==>
>      >      [0000000000
>      >      >      -
>      >      >      >      0000001000]
>      >      >      >      >   #1 [0003046000 - 0003063000]   XEN PAGETABLES
>      ==>
>      >      [0003046000
>      >      >      -
>      >      >      >      0003063000]
>      >      >      >      >   #2 [0000006000 - 0000008000]       TRAMPOLINE
>      ==>
>      >      [0000006000
>      >      >      -
>      >      >      >      0000008000]
>      >      >      >      >   #3 [0001000000 - 000269ae98]    TEXT DATA BSS
>      ==>
>      >      [0001000000
>      >      >      -
>      >      >      >      000269ae98]
>      >      >      >      >   #4 [00026bb000 - 0002d0d800]          RAMDISK
>      ==>
>      >      [00026bb000
>      >      >      -
>      >      >      >      0002d0d800]
>      >      >      >      >   #5 [0002d0e000 - 0003046000]   XEN START INFO
>      ==>
>      >      [0002d0e000
>      >      >      -
>      >      >      >      0003046000]
>      >      >      >      >   #6 [000269b000 - 000269b011]              BRK
>      ==>
>      >      [000269b000
>      >      >      -
>      >      >      >      000269b011]
>      >      >      >      >   #7 [0000100000 - 000041a000]          PGTABLE
>      ==>
>      >      [0000100000
>      >      >      -
>      >      >      >      000041a000]
>      >      >      >      >   #8 [0000001000 - 0000001030]        ACPI SLIT
>      ==>
>      >      [0000001000
>      >      >      -
>      >      >      >      0000001030]
>      >      >      >      > found SMP MP-table at [ffff8800000fd750] fd750
>      >      >      >      > Zone PFN ranges:
>      >      >      >      >   DMA      0x00000000 -> 0x00001000
>      >      >      >      >   DMA32    0x00001000 -> 0x00100000
>      >      >      >      >   Normal   0x00100000 -> 0x00100000
>      >      >      >      > Movable zone start PFN for each node
>      >      >      >      > early_node_map[2] active PFN ranges
>      >      >      >      >     0: 0x00000000 -> 0x0000009d
>      >      >      >      >     0: 0x00000100 -> 0x00066c0a
>      >      >      >      > ACPI: PM-Timer IO Port: 0x408
>      >      >      >      > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00]
>      enabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02]
>      enabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04]
>      enabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10]
>      enabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12]
>      enabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14]
>      enabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01]
>      enabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03]
>      enabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05]
>      enabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11]
>      enabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13]
>      enabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15]
>      enabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff]
>      disabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff]
>      disabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff]
>      disabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff]
>      disabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff]
>      disabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff]
>      disabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff]
>      disabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff]
>      disabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff]
>      disabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff]
>      disabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff]
>      disabled)
>      >      >      >      > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff]
>      disabled)
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x00] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x01] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x02] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x03] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x04] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x05] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x06] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x07] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x08] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x09] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x0a] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x0b] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x0c] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x0d] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x0e] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x0f] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x10] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x11] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x12] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x13] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x14] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x15] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x16] high level
>      lint[0x1])
>      >      >      >      > ACPI: LAPIC_NMI (acpi_id[0x17] high level
>      lint[0x1])
>      >      >      >      > ACPI: IOAPIC (id[0x08] address[0xfec00000]
>      gsi_base[0])
>      >      >      >      > IOAPIC[0]: apic_id 8, version 0, address
>      0xfec00000, GSI
>      >      0-0
>      >      >      >      > ACPI: IOAPIC (id[0x09] address[0xfec90000]
>      gsi_base[24])
>      >      >      >      > IOAPIC[1]: apic_id 9, version 0, address
>      0xfec90000, GSI
>      >      24-24
>      >      >      >      > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2
>      dfl dfl)
>      >      >      >      > ERROR: Unable to locate IOAPIC for GSI 2
>      >      >      >      > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
>      high
>      >      level)
>      >      >      >      > ERROR: Unable to locate IOAPIC for GSI 9
>      >      >      >      > Using ACPI (MADT) for SMP configuration
>      information
>      >      >      >      > ACPI: HPET id: 0x8086a401 base: 0xfed00000
>      >      >      >      > SMP: Allowing 12 CPUs, 0 hotplug CPUs
>      >      >      >      > PM: Registered nosave memory: 000000000009d000 -
>      >      >      0000000000100000
>      >      >      >      > Allocating PCI resources starting at b0000000
>      (gap:
>      >      >      b0000000:4c000000)
>      >      >      >      > Booting paravirtualized kernel on Xen
>      >      >      >      > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0)
>      >      >      >      > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12
>      >      nr_node_ids:1
>      >      >      >      > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000
>      >      s1928024 r8192
>      >      >      d21672
>      >      >      >      u1957888
>      >      >      >      > pcpu-alloc: s1928024 r8192 d21672 u1957888
>      >      alloc=478*4096
>      >      >      >      > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04
>      [0] 05
>      >      [0] 06
>      >      >      [0] 07
>      >      >      >      > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11
>      >      >      >      > Xen: using vcpu_info placement
>      >      >      >      > Built 1 zonelists in Node order, mobility
>      grouping on.
>      >       Total
>      >      >      pages:
>      >      >      >      409291
>      >      >      >      > Policy zone: DMA32
>      >      >      >      > Kernel command line: ro
>      root=/dev/VolGroup01/LogVol00
>      >      >      console=hvc0
>      >      >      >      earlyprintk=xen nomodeset
>      >      >      >      > PID hash table entries: 4096 (order: 3, 32768
>      bytes)
>      >      >      >      > Initializing CPU#0
>      >      >      >      > DMA: Placing 64MB software IO TLB between
>      >      ffff880007525000 -
>      >      >      >      ffff88000b525000
>      >      >      >      > DMA: software IO TLB at phys 0x7525000 -
>      0xb525000
>      >      >      >      > xen_swiotlb_fixup: buf=ffff880007525000
>      size=67108864
>      >      >      >      > xen_swiotlb_fixup: buf=ffff88000b585000
>      size=32768
>      >      >      >      > Memory: 1514268k/1683496k available (4654k kernel
>      code,
>      >      396k
>      >      >      absent,
>      >      >      >      168832k reserved, 3443k data, 3396k init)
>      >      >      >      > SLUB: Genslabs=14, HWalign=64, Order=0-3,
>      MinObjects=0,
>      >      >      CPUs=12,
>      >      >      >      Nodes=1
>      >      >      >      > Hierarchical RCU implementation.
>      >      >      >      > NR_IRQS:4352 nr_irqs:3072
>      >      >      >      > Already setup the GSI :0
>      >      >      >      > Already setup the GSI :1
>      >      >      >      > Already setup the GSI :2
>      >      >      >      > Already setup the GSI :3
>      >      >      >      > Already setup the GSI :4
>      >      >      >      > Already setup the GSI :5
>      >      >      >      > Already setup the GSI :6
>      >      >      >      > Already setup the GSI :7
>      >      >      >      > Already setup the GSI :8
>      >      >      >      > Already setup the GSI :9
>      >      >      >      > Already setup the GSI :10
>      >      >      >      > Already setup the GSI :11
>      >      >      >      > Already setup the GSI :12
>      >      >      >      > Already setup the GSI :13
>      >      >      >      > Already setup the GSI :14
>      >      >      >      > Already setup the GSI :15
>      >      >      >      > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2
>      dfl dfl)
>      >      >      >      > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
>      high
>      >      level)
>      >      >      >      > xen: sci override: source_irq=9 global_irq=9
>      trigger=c
>      >      >      polarity=1
>      >      >      >      > xen_allocate_pirq: returning irq 9 for gsi 9
>      >      >      >      > Already setup the GSI :9
>      >      >      >      > xen: acpi sci 9
>      >      >      >      > Console: colour VGA+ 80x25
>      >      >      >      > console [hvc0] enabled, bootconsole disabled
>      console
>      >      [hvc0]
>      >      >      enabled,
>      >      >      >      bootconsole disabled
>      >      >      >      > Lock dependency validator: Copyright (c) 2006 Red
>      Hat,
>      >      Inc.,
>      >      >      Ingo
>      >      >      >      Molnar ... MAX_LOCKDEP_SUBCLASSES:  8 ...
>      MAX_LOCK_DEPTH:
>      >      >       48
>      >      >      >      ... MAX_LOCKDEP_KEYS:        8191 ...
>      CLASSHASH_SIZE:
>      >      >       4096 ...
>      >      >      >      MAX_LOCKDEP_ENTRIES:     16384 ...
>      MAX_LOCKDEP_CHAINS:
>      >       32768
>      >      >      ...
>      >      >      >      CHAINHASH_SIZE:          16384  memory used by lock
>      >      dependency
>      >      >      info:
>      >      >      >      6367 kB  per task-struct memory footprint: 2688
>      bytes
>      >      allocated
>      >      >      17039360
>      >      >      >      bytes of page_cgroup please try
>      'cgroup_disable=memory'
>      >      option if
>      >      >      you
>      >      >      >      don't want memory cgroups installing Xen timer for
>      CPU 0
>      >      Detected
>      >      >      >      3200.206 MHz processor. Calibrating delay loop
>      (skipped),
>      >      value
>      >      >      >      calculated using timer frequency.. 6400.41 BogoMIPS
>      >      (lpj=3200206)
>      >      >      >      Security Framework initialized SELinux:
>       Initializing.
>      >      Dentry
>      >      >      cache hash
>      >      >      >      table entries: 262144 (order: 9, 2097152 bytes)
>      >      Inode-cache hash
>      >      >      table
>      >      >      >      entries: 131072 (order: 8, 1048576 bytes)
>      Mount-cache hash
>      >      table
>      >      >      >      entries: 256 Initializing cgroup subsys ns
>      Initializing
>      >      cgroup
>      >      >      subsys
>      >      >      >      cpuacct Initializing cgroup subsys memory
>      Initializing
>      >      cgroup
>      >      >      subsys
>      >      >      >      devices Initializing cgroup subsys freezer
>      Initializing
>      >      cgroup
>      >      >      subsys
>      >      >      >      net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU:
>      L2
>      >      cache: 256K
>      >      >      CPU:
>      >      >      >      L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU:
>      Unsupported
>      >      number of
>      >      >      siblings
>      >      >      >      32 Performance Events: unsupported p6 CPU model 44
>      no PMU
>      >      driver,
>      >      >      >      software events only. lockdep: fixing up
>      alternatives. SMP
>      >      >      alternatives:
>      >      >      >      switching to UP code ACPI: Core revision 20090903
>      ftrace:
>      >      >      converting
>      >      >      >      mcount calls to 0f 1f 44 00 00 ftrace: allocating
>      27971
>      >      entries
>      >      >      in 110
>      >      >      >      pages installing Xen timer for CPU 1 lockdep:
>      fixing up
>      >      >      alternatives.
>      >      >      >      SMP alternatives: switching to SMP code
>      Initializing CPU#1
>      >      CPU:
>      >      >      L1 I
>      >      >      >      cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K
>      CPU: L3
>      >      cache:
>      >      >      12288K
>      >      >      >      CPU 1/0x0 -> Node 0 CPU: Unsupported number of
>      siblings 32
>      >      >      installing
>      >      >      >      Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I
>      cache:
>      >      32K, L1 D
>      >      >      cache:
>      >      >      >      32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU
>      2/0x0 ->
>      >      Node 0
>      >      >      CPU:
>      >      >      >      Unsupported number of siblings 32 installing Xen
>      timer for
>      >      CPU 3
>      >      >      >      Initializing CPU#3 CPU: L1 I cache: 32K, L1 D
>      cache: 32K
>      >      CPU: L2
>      >      >      cache:
>      >      >      >      256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU:
>      >      Unsupported
>      >      >      number
>      >      >      >      of siblings 32 installing Xen timer for CPU 4
>      Initializing
>      >      CPU#4
>      >      >      CPU: L1
>      >      >      >      I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K
>      CPU: L3
>      >      cache:
>      >      >      12288K
>      >      >      >      CPU 4/0x0 -> Node 0 CPU: Unsupported number of
>      siblings 32
>      >      >      installing
>      >      >      >      Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I
>      cache:
>      >      32K, L1 D
>      >      >      cache:
>      >      >      >      32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU
>      5/0x0 ->
>      >      Node 0
>      >      >      CPU:
>      >      >      >      Unsupported number of siblings 32 installing Xen
>      timer for
>      >      CPU 6
>      >      >      >      Initializing CPU#6 CPU: L1 I cache: 32K, L1 D
>      cache: 32K
>      >      CPU: L2
>      >      >      cache:
>      >      >      >      256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU:
>      >      Unsupported
>      >      >      number
>      >      >      >      of siblings 32 installing Xen timer for CPU 7
>      Initializing
>      >      CPU#7
>      >      >      CPU: L1
>      >      >      >      I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K
>      CPU: L3
>      >      cache:
>      >      >      12288K
>      >      >      >      CPU 7/0x0 -> Node 0 CPU: Unsupported number of
>      siblings 32
>      >      >      installing
>      >      >      >      Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I
>      cache:
>      >      32K, L1 D
>      >      >      cache:
>      >      >      >      32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU
>      8/0x0 ->
>      >      Node 0
>      >      >      CPU:
>      >      >      >      Unsupported number of siblings 32 installing Xen
>      timer for
>      >      CPU 9
>      >      >      >      Initializing CPU#9 CPU: L1 I cache: 32K, L1 D
>      cache: 32K
>      >      CPU: L2
>      >      >      cache:
>      >      >      >      256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU:
>      >      Unsupported
>      >      >      number
>      >      >      >      of siblings 32 installing Xen timer for CPU 10
>      >      Initializing
>      >      >      CPU#10 CPU:
>      >      >      >      L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache:
>      256K CPU:
>      >      L3
>      >      >      cache:
>      >      >      >      12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number
>      of
>      >      siblings
>      >      >      32
>      >      >      >      installing Xen timer for CPU 11 Initializing CPU#11
>      CPU:
>      >      L1 I
>      >      >      cache:
>      >      >      >      32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3
>      cache:
>      >      12288K
>      >      >      CPU
>      >      >      >      11/0x0 -> Node 0 CPU: Unsupported number of
>      siblings 32
>      >      Brought
>      >      >      up 12
>      >      >      >      CPUs Grant table initialized regulator: core
>      version 0.5
>      >      Time:
>      >      >      14:45:00
>      >      >      >       Date: 03/16/10 NET: Registered protocol family 16
>      >      >      xenbus_probe_init ok
>      >      >      >      ACPI FADT declares the system doesn't support PCIe
>      ASPM,
>      >      so
>      >      >      disable it
>      >      >      >      ACPI: bus type pci registered PCI: MCFG
>      configuration 0:
>      >      base
>      >      >      a0000000
>      >      >      >      segment 0 buses 0 - 255 PCI: MCFG area at a0000000
>      >      reserved in
>      >      >      E820 PCI:
>      >      >      >      Using MMCONFIG at a0000000 - afffffff PCI: Using
>      >      configuration
>      >      >      type 1
>      >      >      >      for base access bio: create slab <bio-0> at 0 ACPI
>      Error:
>      >      Field
>      >      >      [CPB3]
>      >      >      >      at 96 exceeds Buffer [NULL] size 64 (bits)
>      >      >      (20090903/dsopcode-596) ACPI
>      >      >      >      Error (psparse-0537): Method parse/execution failed
>      >      [\_SB_._OSC]
>      >      >      (Node
>      >      >      >      ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI:
>      Interpreter
>      >      enabled
>      >      >      ACPI:
>      >      >      >      (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for
>      interrupt
>      >      >      routing ACPI
>      >      >      >      Warning: Incorrect checksum in table [    ] - 97,
>      should
>      >      be DB
>      >      >      >      (20090903/tbutils-314) ACPI: No dock devices found.
>      ACPI:
>      >      PCI
>      >      >      Root
>      >      >      >      Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME#
>      supported
>      >      from D0
>      >      >      D3hot
>      >      >      >      D3cold pci 0000:00:01.0: PME# disabled pci
>      0000:00:02.0:
>      >      PME#
>      >      >      supported
>      >      >      >      from D0 D3hot D3cold pci 0000:00:02.0: PME#
>      disabled pci
>      >      >      0000:00:03.0:
>      >      >      >      PME# supported from D0 D3hot D3cold pci
>      0000:00:03.0: PME#
>      >      >      disabled pci
>      >      >      >      0000:00:04.0: PME# supported from D0 D3hot D3cold
>      pci
>      >      >      0000:00:04.0: PME#
>      >      >      >      disabled pci 0000:00:05.0: PME# supported from D0
>      D3hot
>      >      D3cold
>      >      >      pci
>      >      >      >      0000:00:05.0: PME# disabled pci 0000:00:06.0: PME#
>      >      supported from
>      >      >      D0
>      >      >      >      D3hot D3cold pci 0000:00:06.0: PME# disabled pci
>      >      0000:00:07.0:
>      >      >      PME#
>      >      >      >      supported from D0 D3hot D3cold pci 0000:00:07.0:
>      PME#
>      >      disabled
>      >      >      pci
>      >      >      >      0000:00:08.0: PME# supported from D0 D3hot D3cold
>      pci
>      >      >      0000:00:08.0: PME#
>      >      >      >      disabled pci 0000:00:09.0: PME# supported from D0
>      D3hot
>      >      D3cold
>      >      >      pci
>      >      >      >      0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME#
>      >      supported from
>      >      >      D0
>      >      >      >      D3hot D3cold pci 0000:00:0a.0: PME# disabled pci
>      >      0000:00:13.0:
>      >      >      PME#
>      >      >      >      supported from D0 D3hot D3cold pci 0000:00:13.0:
>      PME#
>      >      disabled
>      >      >      pci
>      >      >      >      0000:00:1a.7: PME# supported from D0 D3hot D3cold
>      pci
>      >      >      0000:00:1a.7: PME#
>      >      >      >      disabled pci 0000:00:1c.0: PME# supported from D0
>      D3hot
>      >      D3cold
>      >      >      pci
>      >      >      >      0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME#
>      >      supported from
>      >      >      D0
>      >      >      >      D3hot D3cold pci 0000:00:1c.4: PME# disabled pci
>      >      0000:00:1c.5:
>      >      >      PME#
>      >      >      >      supported from D0 D3hot D3cold pci 0000:00:1c.5:
>      PME#
>      >      disabled
>      >      >      pci
>      >      >      >      0000:00:1d.7: PME# supported from D0 D3hot D3cold
>      pci
>      >      >      0000:00:1d.7: PME#
>      >      >      >      disabled pci 0000:00:1f.0: quirk: region 0400-047f
>      claimed
>      >      by
>      >      >      ICH6
>      >      >      >      ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region
>      0500-053f
>      >      claimed
>      >      >      by ICH6
>      >      >      >      GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1
>      PIO at
>      >      0680
>      >      >      (mask
>      >      >      >      000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode
>      2 PIO
>      >      at 0ca0
>      >      >      (mask
>      >      >      >      000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode
>      3 PIO
>      >      at 0600
>      >      >      (mask
>      >      >      >      001f) pci 0000:00:1f.2: PME# supported from D3hot
>      pci
>      >      >      0000:00:1f.2: PME#
>      >      >      >      disabled pci 0000:01:00.0: PME# supported from D0
>      D3hot
>      >      D3cold
>      >      >      pci
>      >      >      >      0000:01:00.0: PME# disabled pci 0000:01:00.1: PME#
>      >      supported from
>      >      >      D0
>      >      >      >      D3hot D3cold pci 0000:01:00.1: PME# disabled pci
>      >      0000:0c:00.0:
>      >      >      disabling
>      >      >      >      ASPM on pre-1.1 PCIe device.  You can enable it
>      with
>      >      >      'pcie_aspm=force'
>      >      >      >      pci 0000:00:1e.0: transparent bridge ACPI: PCI Root
>      Bridge
>      >      [PCI1]
>      >      >      >      (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff)
>      ACPI: PCI
>      >      >      Interrupt
>      >      >      >      Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>      ACPI: PCI
>      >      >      Interrupt Link
>      >      >      >      [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI
>      >      Interrupt
>      >      >      Link
>      >      >      >      [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI
>      >      Interrupt
>      >      >      Link
>      >      >      >      [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI
>      >      Interrupt
>      >      >      Link
>      >      >      >      [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>      disabled.
>      >      ACPI: PCI
>      >      >      >      Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12
>      14 15)
>      >      ACPI:
>      >      >      PCI
>      >      >      >      Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14
>      15)
>      >      *0,
>      >      >      disabled.
>      >      >      >      ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9
>      *10 11
>      >      12 14
>      >      >      15)
>      >      >      >      xenbus_probe_backend_init bus registered ok
>      >      >      xenbus_probe_frontend_init
>      >      >      >      bus registered ok xen_balloon: Initialising balloon
>      driver
>      >      with
>      >      >      page
>      >      >      >      order 0. vgaarb: device added:
>      >      >      >
>       PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none
>      >      vgaarb:
>      >      >      loaded
>      >      >      >      SCSI subsystem initialized usbcore: registered new
>      >      interface
>      >      >      driver
>      >      >      >      usbfs usbcore: registered new interface driver hub
>      >      usbcore:
>      >      >      registered
>      >      >      >      new device driver usb PCI: Using ACPI for IRQ
>      routing
>      >      NetLabel:
>      >      >      >      Initializing NetLabel:  domain hash size = 128
>      NetLabel:
>      >      >       protocols =
>      >      >      >      UNLABELED CIPSOv4 NetLabel:  unlabeled traffic
>      allowed by
>      >      default
>      >      >      >      Switching to clocksource xen kstop/0 used greatest
>      stack
>      >      depth:
>      >      >      6568
>      >      >      >      bytes left kstop/1 used greatest stack depth: 6536
>      bytes
>      >      left
>      >      >      pnp: PnP
>      >      >      >      ACPI init ACPI: bus type pnp registered
>      xen_allocate_pirq:
>      >      >      returning irq
>      >      >      >      8 for gsi 8 Already setup the GSI :8
>      xen_allocate_pirq:
>      >      returning
>      >      >      irq 13
>      >      >      >      for gsi 13 Already setup the GSI :13 pnp: PnP ACPI:
>      found
>      >      13
>      >      >      devices
>      >      >      >      ACPI: ACPI bus type pnp unregistered system 00:07:
>      ioport
>      >      range
>      >      >      >      0x500-0x53f has been reserved system 00:07: ioport
>      range
>      >      >      0x400-0x47f has
>      >      >      >      been reserved system 00:07: ioport range
>      0x800-0x81f has
>      >      been
>      >      >      reserved
>      >      >      >      system 00:07: ioport range 0x2f8-0x2ff has been
>      reserved
>      >      system
>      >      >      00:07:
>      >      >      >      iomem range 0xfed1c000-0xfed8bffe could not be
>      reserved
>      >      system
>      >      >      00:07:
>      >      >      >      iomem range 0xff000000-0xffffffff could not be
>      reserved
>      >      system
>      >      >      00:07:
>      >      >      >      iomem range 0xfee00000-0xfeefffff has been reserved
>      system
>      >      00:07:
>      >      >      iomem
>      >      >      >      range 0xfe900000-0xfe90001f has been reserved
>      system
>      >      00:07: iomem
>      >      >      range
>      >      >      >      0xfea00000-0xfea0001f has been reserved system
>      00:07:
>      >      iomem range
>      >      >      >      0xfed1b000-0xfed1bfff has been reserved pci
>      0000:0c:00.0:
>      >      BAR 6:
>      >      >      no
>      >      >      >      parent found for of device [0xffff0000-0xffffffff]
>      pci
>      >      >      0000:00:01.0: PCI
>      >      >      >      bridge, secondary bus 0000:01 pci 0000:00:01.0:
>      IO
>      >      window:
>      >      >      >      0x1000-0x1fff pci 0000:00:01.0:   MEM window:
>      >      >      0xb1900000-0xb19fffff pci
>      >      >      >      0000:00:01.0:   PREFETCH window: disabled pci
>      >      0000:00:02.0: PCI
>      >      >      bridge,
>      >      >      >      secondary bus 0000:02 pci 0000:00:02.0:   IO
>      window:
>      >      disabled pci
>      >      >      >      0000:00:02.0:   MEM window: disabled pci
>      0000:00:02.0:
>      >      PREFETCH
>      >      >      >      window: disabled pci 0000:00:03.0: PCI bridge,
>      secondary
>      >      bus
>      >      >      0000:03 pci
>      >      >      >      0000:00:03.0:   IO window: disabled pci
>      0000:00:03.0:
>      >      MEM
>      >      >      window:
>      >      >      >      disabled pci 0000:00:03.0:   PREFETCH window:
>      disabled pci
>      >      >      0000:00:04.0:
>      >      >      >      PCI bridge, secondary bus 0000:04 pci 0000:00:04.0:
>        IO
>      >      window:
>      >      >      >      disabled pci 0000:00:04.0:   MEM window: disabled
>      pci
>      >      >      0000:00:04.0:
>      >      >      >      PREFETCH window: disabled pci 0000:00:05.0: PCI
>      bridge,
>      >      secondary
>      >      >      bus
>      >      >      >      0000:05 pci 0000:00:05.0:   IO window: disabled pci
>      >      0000:00:05.0:
>      >      >        MEM
>      >      >      >      window: disabled pci 0000:00:05.0:   PREFETCH
>      window:
>      >      disabled
>      >      >      pci
>      >      >      >      0000:00:06.0: PCI bridge, secondary bus 0000:06 pci
>      >      0000:00:06.0:
>      >      >        IO
>      >      >      >      window: disabled pci 0000:00:06.0:   MEM window:
>      disabled
>      >      pci
>      >      >      >      0000:00:06.0:   PREFETCH window: disabled pci
>      >      0000:00:07.0: PCI
>      >      >      bridge,
>      >      >      >      secondary bus 0000:07 pci 0000:00:07.0:   IO
>      window:
>      >      disabled pci
>      >      >      >      0000:00:07.0:   MEM window: disabled pci
>      0000:00:07.0:
>      >      PREFETCH
>      >      >      >      window: disabled pci 0000:00:08.0: PCI bridge,
>      secondary
>      >      bus
>      >      >      0000:08 pci
>      >      >      >      0000:00:08.0:   IO window: disabled pci
>      0000:00:08.0:
>      >      MEM
>      >      >      window:
>      >      >      >      disabled pci 0000:00:08.0:   PREFETCH window:
>      disabled pci
>      >      >      0000:00:09.0:
>      >      >      >      PCI bridge, secondary bus 0000:09 pci 0000:00:09.0:
>        IO
>      >      window:
>      >      >      >      0x3000-0x3fff pci 0000:00:09.0:   MEM window:
>      >      >      0xb1b00000-0xb1cfffff pci
>      >      >      >      0000:00:09.0:   PREFETCH window:
>      >      >      0x000000b1d00000-0x000000b1efffff pci
>      >      >      >      0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci
>      >      0000:00:0a.0:
>      >      >        IO
>      >      >      >      window: disabled pci 0000:00:0a.0:   MEM window:
>      disabled
>      >      pci
>      >      >      >      0000:00:0a.0:   PREFETCH window: disabled pci
>      >      0000:00:1c.0: PCI
>      >      >      bridge,
>      >      >      >      secondary bus 0000:0b pci 0000:00:1c.0:   IO
>      window:
>      >      disabled pci
>      >      >      >      0000:00:1c.0:   MEM window: disabled pci
>      0000:00:1c.0:
>      >      PREFETCH
>      >      >      >      window: disabled pci 0000:00:1c.4: PCI bridge,
>      secondary
>      >      bus
>      >      >      0000:0c pci
>      >      >      >      0000:00:1c.4:   IO window: disabled pci
>      0000:00:1c.4:
>      >      MEM
>      >      >      window:
>      >      >      >      0xb1000000-0xb18fffff pci 0000:00:1c.4:   PREFETCH
>      window:
>      >      >      >      0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5:
>      PCI
>      >      bridge,
>      >      >      >      secondary bus 0000:0d pci 0000:00:1c.5:   IO
>      window:
>      >      disabled pci
>      >      >      >      0000:00:1c.5:   MEM window: disabled pci
>      0000:00:1c.5:
>      >      PREFETCH
>      >      >      >      window: disabled pci 0000:00:1e.0: PCI bridge,
>      secondary
>      >      bus
>      >      >      0000:0e pci
>      >      >      >      0000:00:1e.0:   IO window: disabled pci
>      0000:00:1e.0:
>      >      MEM
>      >      >      window:
>      >      >      >      disabled pci 0000:00:1e.0:   PREFETCH window:
>      disabled pci
>      >      >      0000:00:01.0:
>      >      >      >      PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci
>      >      0000:00:02.0: PCI
>      >      >      INT A
>      >      >      >      -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0:
>      PCI INT
>      >      A ->
>      >      >      GSI 24
>      >      >      >      (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A
>      -> GSI
>      >      25
>      >      >      (level,
>      >      >      >      low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI
>      26
>      >      (level, low)
>      >      >      -> IRQ
>      >      >      >      26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level,
>      low) ->
>      >      IRQ 27
>      >      >      pci
>      >      >      >      0000:00:07.0: PCI INT A -> GSI 30 (level, low) ->
>      IRQ 30
>      >      pci
>      >      >      >      0000:00:08.0: PCI INT A -> GSI 31 (level, low) ->
>      IRQ 31
>      >      pci
>      >      >      >      0000:00:09.0: PCI INT A -> GSI 32 (level, low) ->
>      IRQ 32
>      >      pci
>      >      >      >      0000:00:0a.0: PCI INT A -> GSI 33 (level, low) ->
>      IRQ 33
>      >      pci
>      >      >      >      0000:00:1c.0: PCI INT A -> GSI 16 (level, low) ->
>      IRQ 16
>      >      >      >      xen_allocate_pirq: returning irq 16 for gsi 16
>      Already
>      >      setup the
>      >      >      GSI :16
>      >      >      >      pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low)
>      -> IRQ
>      >      16 pci
>      >      >      >      0000:00:1c.5: PCI INT B -> GSI 17 (level, low) ->
>      IRQ 17
>      >      NET:
>      >      >      Registered
>      >      >      >      protocol family 2 IP route cache hash table
>      entries: 65536
>      >      >      (order: 7,
>      >      >      >      524288 bytes) TCP established hash table entries:
>      262144
>      >      (order:
>      >      >      10,
>      >      >      >      4194304 bytes) TCP bind hash table entries: 65536
>      (order:
>      >      10,
>      >      >      4718592
>      >      >      >      bytes) TCP: Hash tables configured (established
>      262144
>      >      bind
>      >      >      65536) TCP
>      >      >      >      reno registered NET: Registered protocol family 1
>      pci
>      >      >      0000:01:00.0:
>      >      >      >      Disabling L0s pci 0000:01:00.1: Disabling L0s
>      Trying to
>      >      unpack
>      >      >      rootfs
>      >      >      >      image as initramfs... Freeing initrd memory: 6474k
>      freed
>      >      DMA-API:
>      >      >      >      preallocated 32768 debug entries DMA-API: debugging
>      >      enabled by
>      >      >      kernel
>      >      >      >      config PCI-DMA: Using software bounce buffering for
>      IO
>      >      (SWIOTLB)
>      >      >      DMA:
>      >      >      >      Placing 64MB software IO TLB between
>      ffff880007525000 -
>      >      >      ffff88000b525000
>      >      >      >      DMA: software IO TLB at phys 0x7525000 - 0xb525000
>      audit:
>      >      >      initializing
>      >      >      >      netlink socket (disabled) type=2000
>      >      audit(1268750702.035:1):
>      >      >      initialized
>      >      >      >      HugeTLB registered 2 MB page size, pre-allocated 0
>      pages
>      >      VFS:
>      >      >      Disk
>      >      >      >      quotas dquot_6.5.2 Dquot-cache hash table entries:
>      512
>      >      (order 0,
>      >      >      4096
>      >      >      >      bytes) msgmni has been set to 2970 cryptomgr_test
>      used
>      >      greatest
>      >      >      stack
>      >      >      >      depth: 5864 bytes left cryptomgr_test used greatest
>      stack
>      >      depth:
>      >      >      5816
>      >      >      >      bytes left alg: No test for stdrng (krng) Block
>      layer SCSI
>      >      >      generic (bsg)
>      >      >      >      driver version 0.4 loaded (major 252) io scheduler
>      noop
>      >      >      registered io
>      >      >      >      scheduler anticipatory registered io scheduler
>      deadline
>      >      >      registered io
>      >      >      >      scheduler cfq registered (default) pci_hotplug: PCI
>      Hot
>      >      Plug PCI
>      >      >      Core
>      >      >      >      version: 0.5 pciehp 0000:00:09.0:pcie04: HPC
>      vendor_id
>      >      8086
>      >      >      device_id
>      >      >      >      3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug
>      >      Controller
>      >      >      Driver
>      >      >      >      version: 0.4 acpiphp: ACPI Hot Plug PCI Controller
>      Driver
>      >      >      version: 0.5
>      >      >      >      acpiphp_glue: Slot 2 already registered by another
>      hotplug
>      >      driver
>      >      >      >      acpiphp_glue: Slot 2 already registered by another
>      hotplug
>      >      driver
>      >      >      >      acpiphp_glue: Slot 2 already registered by another
>      hotplug
>      >      driver
>      >      >      >      acpiphp_glue: Slot 2 already registered by another
>      hotplug
>      >      driver
>      >      >      >      acpiphp_glue: Slot 2 already registered by another
>      hotplug
>      >      driver
>      >      >      >      acpiphp_glue: Slot 2 already registered by another
>      hotplug
>      >      driver
>      >      >      >      acpiphp_glue: Slot 2 already registered by another
>      hotplug
>      >      driver
>      >      >      >      acpiphp_glue: Slot 2 already registered by another
>      hotplug
>      >      driver
>      >      >      >      pci-stub: invalid id string "" input: Sleep Button
>      as
>      >      >      >
>       /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
>      >      ACPI:
>      >      >      Sleep
>      >      >      >      Button [SLPB] input: Power Button as
>      >      >      >      /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI:
>      Power
>      >      Button
>      >      >      [PWRF]
>      >      >      >      registering netback hpet_acpi_add: no address or
>      irqs in
>      >      _CRS
>      >      >      >      Non-volatile memory driver v1.3 Linux agpgart
>      interface
>      >      v0.103
>      >      >      Serial:
>      >      >      >      8250/16550 driver, 4 ports, IRQ sharing enabled
>      >      serial8250: ttyS1
>      >      >      at I/O
>      >      >      >      0x2f8 (irq = 3) is a 16550A brd: module loaded
>      loop:
>      >      module
>      >      >      loaded
>      >      >      >      input: Macintosh mouse button emulation as
>      >      >      /devices/virtual/input/input2
>      >      >      >      ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low)
>      -> IRQ
>      >      19
>      >      >      ahci
>      >      >      >      0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3
>      Gbps 0x3f
>      >      impl
>      >      >      SATA mode
>      >      >      >      ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo
>      pio
>      >      slum part
>      >      >      ccc
>      >      >      >      ems  scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 :
>      ahci
>      >      scsi4 :
>      >      >      ahci
>      >      >      >      scsi5 : ahci ata1: SATA max UDMA/133 irq_stat
>      0x00400040,
>      >      >      connection
>      >      >      >      status changed irq 2996 ata2: SATA max UDMA/133
>      abar
>      >      >      m2048@0xb1a00000
>      >      >      >      port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133
>      abar
>      >      >      m2048@0xb1a00000
>      >      >      >      port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133
>      abar
>      >      >      m2048@0xb1a00000
>      >      >      >      port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133
>      abar
>      >      >      m2048@0xb1a00000
>      >      >      >      port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133
>      abar
>      >      >      m2048@0xb1a00000
>      >      >      >      port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed
>      ehci_hcd:
>      >      USB 2.0
>      >      >      >      'Enhanced' Host Controller (EHCI) Driver ehci_hcd
>      >      0000:00:1a.7:
>      >      >      PCI INT
>      >      >      >      C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd
>      0000:00:1a.7:
>      >      EHCI
>      >      >      Host
>      >      >      >      Controller ehci_hcd 0000:00:1a.7: new USB bus
>      registered,
>      >      >      assigned bus
>      >      >      >      number 1 ehci_hcd 0000:00:1a.7: debug port 1
>      ehci_hcd
>      >      >      0000:00:1a.7: irq
>      >      >      >      18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB
>      2.0
>      >      started,
>      >      >      EHCI 1.00
>      >      >      >      usb usb1: New USB device found, idVendor=1d6b,
>      >      idProduct=0002 usb
>      >      >      usb1:
>      >      >      >      New USB device strings: Mfr=3, Product=2,
>      SerialNumber=1
>      >      usb
>      >      >      usb1:
>      >      >      >      Product: EHCI Host Controller usb usb1:
>      Manufacturer:
>      >      Linux
>      >      >      2.6.32.9
>      >      >      >      ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb
>      usb1:
>      >      >      configuration #1
>      >      >      >      chosen from 1 choice hub 1-0:1.0: USB hub found hub
>      >      1-0:1.0: 6
>      >      >      ports
>      >      >      >      detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23
>      >      (level, low)
>      >      >      -> IRQ
>      >      >      >      23 ehci_hcd 0000:00:1d.7: EHCI Host Controller
>      ehci_hcd
>      >      >      0000:00:1d.7:
>      >      >      >      new USB bus registered, assigned bus number 2
>      ehci_hcd
>      >      >      0000:00:1d.7:
>      >      >      >      debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem
>      >      0xb1a01000
>      >      >      ehci_hcd
>      >      >      >      0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2:
>      New USB
>      >      device
>      >      >      found,
>      >      >      >      idVendor=1d6b, idProduct=0002 usb usb2: New USB
>      device
>      >      strings:
>      >      >      Mfr=3,
>      >      >      >      Product=2, SerialNumber=1 usb usb2: Product: EHCI
>      Host
>      >      Controller
>      >      >      usb
>      >      >      >      usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb
>      usb2:
>      >      >      SerialNumber:
>      >      >      >      0000:00:1d.7 usb usb2: configuration #1 chosen from
>      1
>      >      choice hub
>      >      >      >      2-0:1.0: USB hub found hub 2-0:1.0: 6 ports
>      detected
>      >      ohci_hcd:
>      >      >      USB 1.1
>      >      >      >      'Open' Host Controller (OHCI) Driver uhci_hcd: USB
>      >      Universal Host
>      >      >      >      Controller Interface driver xen_allocate_pirq:
>      returning
>      >      irq 16
>      >      >      for gsi
>      >      >      >      16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0:
>      PCI
>      >      INT A ->
>      >      >      GSI 16
>      >      >      >      (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI
>      Host
>      >      >      Controller
>      >      >      >      uhci_hcd 0000:00:1a.0: new USB bus registered,
>      assigned
>      >      bus
>      >      >      number 3
>      >      >      >      uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0
>      usb
>      >      usb3: New
>      >      >      USB
>      >      >      >      device found, idVendor=1d6b, idProduct=0001 usb
>      usb3: New
>      >      USB
>      >      >      device
>      >      >      >      strings: Mfr=3, Product=2, SerialNumber=1 usb usb3:
>      >      Product: UHCI
>      >      >      Host
>      >      >      >      Controller usb usb3: Manufacturer: Linux 2.6.32.9
>      uhci_hcd
>      >      usb
>      >      >      usb3:
>      >      >      >      SerialNumber: 0000:00:1a.0 usb usb3: configuration
>      #1
>      >      chosen from
>      >      >      1
>      >      >      >      choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2
>      ports
>      >      detected
>      >      >      uhci_hcd
>      >      >      >      0000:00:1a.1: PCI INT B -> GSI 21 (level, low) ->
>      IRQ 21
>      >      uhci_hcd
>      >      >      >      0000:00:1a.1: UHCI Host Controller uhci_hcd
>      0000:00:1a.1:
>      >      new USB
>      >      >      bus
>      >      >      >      registered, assigned bus number 4 uhci_hcd
>      0000:00:1a.1:
>      >      irq 21,
>      >      >      io base
>      >      >      >      0x000020c0 usb usb4: New USB device found,
>      idVendor=1d6b,
>      >      >      idProduct=0001
>      >      >      >      usb usb4: New USB device strings: Mfr=3, Product=2,
>      >      >      SerialNumber=1 usb
>      >      >      >      usb4: Product: UHCI Host Controller usb usb4:
>      >      Manufacturer: Linux
>      >      >      >      2.6.32.9 uhci_hcd usb usb4: SerialNumber:
>      0000:00:1a.1 usb
>      >      usb4:
>      >      >      >      configuration #1 chosen from 1 choice hub 4-0:1.0:
>      USB hub
>      >      found
>      >      >      hub
>      >      >      >      4-0:1.0: 2 ports detected xen_allocate_pirq:
>      returning irq
>      >      19 for
>      >      >      gsi 19
>      >      >      >      Already setup the GSI :19 uhci_hcd 0000:00:1a.2:
>      PCI INT D
>      >      -> GSI
>      >      >      19
>      >      >      >      (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI
>      Host
>      >      >      Controller
>      >      >      >      uhci_hcd 0000:00:1a.2: new USB bus registered,
>      assigned
>      >      bus
>      >      >      number 5
>      >      >      >      uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0
>      usb
>      >      usb5: New
>      >      >      USB
>      >      >      >      device found, idVendor=1d6b, idProduct=0001 usb
>      usb5: New
>      >      USB
>      >      >      device
>      >      >      >      strings: Mfr=3, Product=2, SerialNumber=1 usb usb5:
>      >      Product: UHCI
>      >      >      Host
>      >      >      >      Controller usb usb5: Manufacturer: Linux 2.6.32.9
>      uhci_hcd
>      >      usb
>      >      >      usb5:
>      >      >      >      SerialNumber: 0000:00:1a.2 usb usb5: configuration
>      #1
>      >      chosen from
>      >      >      1
>      >      >      >      choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2
>      ports
>      >      detected
>      >      >      >      xen_allocate_pirq: returning irq 23 for gsi 23
>      Already
>      >      setup the
>      >      >      GSI :23
>      >      >      >      uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level,
>      low) ->
>      >      IRQ 23
>      >      >      >      uhci_hcd 0000:00:1d.0: UHCI Host Controller
>      uhci_hcd
>      >      >      0000:00:1d.0: new
>      >      >      >      USB bus registered, assigned bus number 6 uhci_hcd
>      >      0000:00:1d.0:
>      >      >      irq 23,
>      >      >      >      io base 0x00002080 usb usb6: New USB device found,
>      >      idVendor=1d6b,
>      >      >      >      idProduct=0001 usb usb6: New USB device strings:
>      Mfr=3,
>      >      >      Product=2,
>      >      >      >      SerialNumber=1 usb usb6: Product: UHCI Host
>      Controller usb
>      >      usb6:
>      >      >      >      Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6:
>      >      SerialNumber:
>      >      >      >      0000:00:1d.0 usb usb6: configuration #1 chosen from
>      1
>      >      choice hub
>      >      >      >      6-0:1.0: USB hub found hub 6-0:1.0: 2 ports
>      detected
>      >      >      xen_allocate_pirq:
>      >      >      >      returning irq 19 for gsi 19 Already setup the GSI
>      :19
>      >      uhci_hcd
>      >      >      >      0000:00:1d.1: PCI INT B -> GSI 19 (level, low) ->
>      IRQ 19
>      >      uhci_hcd
>      >      >      >      0000:00:1d.1: UHCI Host Controller uhci_hcd
>      0000:00:1d.1:
>      >      new USB
>      >      >      bus
>      >      >      >      registered, assigned bus number 7 uhci_hcd
>      0000:00:1d.1:
>      >      irq 19,
>      >      >      io base
>      >      >      >      0x00002060 usb usb7: New USB device found,
>      idVendor=1d6b,
>      >      >      idProduct=0001
>      >      >      >      usb usb7: New USB device strings: Mfr=3, Product=2,
>      >      >      SerialNumber=1 usb
>      >      >      >      usb7: Product: UHCI Host Controller usb usb7:
>      >      Manufacturer: Linux
>      >      >      >      2.6.32.9 uhci_hcd usb usb7: SerialNumber:
>      0000:00:1d.1 usb
>      >      usb7:
>      >      >      >      configuration #1 chosen from 1 choice hub 7-0:1.0:
>      USB hub
>      >      found
>      >      >      hub
>      >      >      >      7-0:1.0: 2 ports detected xen_allocate_pirq:
>      returning irq
>      >      18 for
>      >      >      gsi 18
>      >      >      >      Already setup the GSI :18 uhci_hcd 0000:00:1d.2:
>      PCI INT C
>      >      -> GSI
>      >      >      18
>      >      >      >      (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI
>      Host
>      >      >      Controller
>      >      >      >      uhci_hcd 0000:00:1d.2: new USB bus registered,
>      assigned
>      >      bus
>      >      >      number 8
>      >      >      >      uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
>      usb
>      >      usb8: New
>      >      >      USB
>      >      >      >      device found, idVendor=1d6b, idProduct=0001 usb
>      usb8: New
>      >      USB
>      >      >      device
>      >      >      >      strings: Mfr=3, Product=2, SerialNumber=1 usb usb8:
>      >      Product: UHCI
>      >      >      Host
>      >
>
> References
>
>    Visible links
>    1. mailto:pasik@xxxxxx
>    2. mailto:pasik@xxxxxx
>    3. mailto:pasik@xxxxxx
>    4. mailto:pasik@xxxxxx
>    9. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>   10. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>   11. mailto:pasik@xxxxxx
>   16. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>   17. http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64
>   18. mailto:pasik@xxxxxx

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>