|
xen-users
Re: [Xen-users] my bootlog
1. Please , don't break the thread ( i mean cc:).
2. Could you post "df -h" output.
In my case:-
[root@ServerXen341F xen-3.4.1]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg_serverxen341f-LogVol00
29G 23G 4.5G 84% /
/dev/sdb8 194M 55M 130M 30% /boot
tmpfs 3.9G 528K 3.9G 1%
/dev/shm
/dev/sda14 36G 15G 20G 43% /mnt
It is for Intel ICHR9R (AHCI) South Bridge with SATA drive attached.
In you case i would suspect SAS Controller setup in BIOS as "SCSI".
You mean it prevents F11 from default /boot+LVM setup ?
Boris.
--- On Wed, 8/19/09, Fasiha Ashraf <feehapk@xxxxxxxxxxx> wrote:
From: Fasiha Ashraf <feehapk@xxxxxxxxxxx>
Subject: Re: [Xen-users] my bootlog
To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
Date: Wednesday, August 19, 2009, 2:09 AM
In my case the automatically generated root entry is "root=UUID=d720ff88-c63d-4bce-abc3-c2f867dd1730 rhgb quiet"
as in i am using scuzzy drive not LVM logical volume groups.
should i use the same for xen module entry?
Regards,
Fasiha Ashraf
--- On Wed, 19/8/09, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote:
From: Boris Derzhavets <bderzhavets@xxxxxxxxx>
Subject: Re: [Xen-users] my bootlog
To: "Fasiha Ashraf" <feehapk@xxxxxxxxxxx>
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Wednesday, 19 August, 2009, 10:15 AM
When you install F11 this root entries are already generated to normal boot in menu.lst.
Xen Grub's entry just uses the same "root" for either pvops or xenified kernel ( module's entry ).
Boris
--- On Wed, 8/19/09, Fasiha Ashraf <feehapk@xxxxxxxxxxx> wrote:
From: Fasiha Ashraf <feehapk@xxxxxxxxxxx>
Subject: Re: [Xen-users] my bootlog
To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
Date: Wednesday, August 19, 2009, 12:42 AM
"root=/dev/mapper/vg_fedora11-LogVol00 ro console=tty0"
Have you created these logical volume groups manually or fedora generates itself during the whole process.
thanks for reply. I am trying that git command u mentioned in your reply hoping for required results.
Regards,
Fasiha Ashraf
--- On Wed, 19/8/09, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote:
From: Boris Derzhavets <bderzhavets@xxxxxxxxxx>
Subject: Re: [Xen-users] my bootlog
To: james.dingwall@xxxxxxxxxx, "Fasiha Ashraf" <feehapk@xxxxxxxxxxx>
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Wednesday, 19 August, 2009, 9:26 AM
1. To get 2.6.31-rc6
# git clone git://git.kernel.org/pub/scm/linux/kernel /git/jeremy/xen.git linux-2.6-xen
# cd linux-2.6-xen
# git checkout origin/rebase/master -b rebase/master
>where we specify the
boot partition
>root=/dev/mapper/VolGroup01/vg_fedora11 ro
2. I didn't have any problems with loading via grub entry
title Xen 3.4 / Fedora kernel 2.6.30-rc6-tip
kernel /boot/xen-3.4.gz
module /boot/vmlinuz-2.6.30-rc6-tip root=/dev/mapper/vg_fedora11-LogVol00 ro console=tty0
module /boot/initrd-2.6.30-rc6-tip.img
Boris.
|
-----Inline Attachment Follows-----
|
See the Web's breaking stories, chosen by people like you. Check out Yahoo! Buzz.
|
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
-----Inline Attachment Follows-----
|
Yahoo! recommends that you upgrade to the new and safer Internet Explorer 8.
|
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
Home