|   | 
      | 
  
  
      | 
      | 
  
 
     | 
    | 
  
  
     | 
    | 
  
  
    |   | 
      | 
  
  
    | 
         
xen-users
[Xen-users] Xen 3.3 bridged-networking
 
Hi
  I don't quite understand the new xen networking. We use network-bridge! Everything works fine except that an iptables firewall on dom0 blocks all my domU. In my firewall settings i use eth0. I figured out that eth0 is the bridge but where is the interface for dom0? I want my firewall setting to only apply to dom0 interface! 
Since there is not anything like vif0.0 i don't know on which interface to set up my firewall. Any suggestions how to solve this problem?
  $ ifconfig eth0      Link encap:Ethernet  HWaddr 00:1E:8C:AC:00:3E   
          inet addr:XXX.XXX.XXX.XXX  Bcast:XXX.XXX.XXX.255  Mask:255.XXX.XXX.0           inet6 addr: fe80::21e:8cff:feac:3e/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:10875232 errors:0 dropped:0 overruns:0 frame:0 
          TX packets:630670 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:0            RX bytes:560653230 (534.6 MiB)  TX bytes:126624363 (120.7 MiB)
  lo        Link encap:Local Loopback   
          inet addr:127.0.0.1  Mask:255.0.0.0           inet6 addr: ::1/128 Scope:Host           UP LOOPBACK RUNNING  MTU:16436  Metric:1           RX packets:11 errors:0 dropped:0 overruns:0 frame:0 
          TX packets:11 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:0            RX bytes:800 (800.0 b)  TX bytes:800 (800.0 b)
  peth0     Link encap:Ethernet  HWaddr 00:1E:8C:AC:00:3E   
          inet6 addr: fe80::21e:8cff:feac:3e/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:18782863 errors:0 dropped:0 overruns:0 frame:0           TX packets:955865 errors:0 dropped:0 overruns:0 carrier:0 
          collisions:0 txqueuelen:1000            RX bytes:5366361211 (4.9 GiB)  TX bytes:164506458 (156.8 MiB)           Interrupt:17 Base address:0x8000 
  tap9.0    Link encap:Ethernet  HWaddr B6:E6:93:CB:50:0F   
          inet6 addr: fe80::b4e6:93ff:fecb:500f/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:9419 errors:0 dropped:0 overruns:0 frame:0           TX packets:7884657 errors:0 dropped:0 overruns:0 carrier:0 
          collisions:0 txqueuelen:500            RX bytes:1101856 (1.0 MiB)  TX bytes:515896160 (491.9 MiB)
  vif3.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF             inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:37361 errors:0 dropped:0 overruns:0 frame:0           TX packets:11325864 errors:0 dropped:938 overruns:0 carrier:0           collisions:0 txqueuelen:0  
          RX bytes:4752571 (4.5 MiB)  TX bytes:1377423212 (1.2 GiB)
  vif9.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF             UP BROADCAST MULTICAST  MTU:1500  Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0 
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:0            RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
 
  Thanks for all your help Max
  
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users 
 |   
 
| <Prev in Thread] | 
Current Thread | 
[Next in Thread>
 |  
- [Xen-users] Xen 3.3 bridged-networking,
Maximilian W. Zeller <=
 
 
 |  
  
 | 
    | 
  
  
    |   | 
    |