[Xen-users] USB in DomU

[Andreas Müller <mail@xxxxxxxxxxxx>]

Hi,

I'm using Xen on an Intel Atom board with 8 USB ports (4 on the back  
and 4 as slots). An usb-stick acts as the
harddrive and is therefore needed in dom0. Now I'd like to connect a  
DVB Stick to a domU.
- Is it possible to only forward certain USB ports rather than the  
whole Controller (via pciback.hide)?
- Why does lspci only show 4 controllers? Does every controller  
control 2 ports? And what is 00:1d.7?
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB  
UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB  
UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB  
UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB  
UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2  
EHCI Controller (rev 01)
- When I hide 00:1d.1, 00:1d.2, 00:1d.3 via  pciback.hide=(00:1d.1) 
(00:1d.2)(00:1d.3) noirqdebug from the dom0 and
make them available in the domU's config I can see 2(?) controllers in  
the domU but no DVB-Stick.
Udev is installed, syslog does nothing

lspci
0000:00:00.1 USB Controller: Intel Corporation 82801G (ICH7 Family)  
USB UHCI #2 (rev 01)
0000:00:00.2 USB Controller: Intel Corporation 82801G (ICH7 Family)  
USB UHCI #3 (rev 01)
lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

Any comment is appreciated!

Thanks,
Andreas

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users