WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] Kernel Panic on trying to boot domU

On Di, Mär 25, 2008 at 01:42:16 -0400, weiming wrote:
> Did you check the process of creating the virtual partition?


You can check 
your domain U filesystem
with the commands:

mount -o loop /second/fc6_domudisk /mnt
chroot /mnt
(try to work with the chrooted system)
ls -l /sbin/init # (in chroot)


> 
> On Tue, Mar 25, 2008 at 1:12 PM, Girish V <girish.xen@xxxxxxxxx> wrote:
> 
> > Hello Igor and Weiming,
> > Thnaks for the replies.
> >
> > I tried changing "sda" to "hda" in the config file, but the kernel still
> > panics. The output is listed below. From a quick scan, it seems to be no
> > different from when  I use sda (except for vbd 3 being used instead of vbd8)
> >
> >
> > --------------------------------------------------------------------------------------------------
> >
> > [root@localhost second]# xm create -c file-config-rh9_diskimg
> > Using config file "./file-config-rh9_diskimg".
> > Started domain fc6_new
> >                       Linux version 2.6.18.8-xen (
> > root@xxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-13))
> > #2 SMP Thu Mar 20 17:40:00 EDT 2008
> > BIOS-provided physical RAM map:
> >  Xen: 0000000000000000 - 0000000010800000 (usable)
> > 0MB HIGHMEM available.
> > 264MB LOWMEM available.
> > ACPI in unprivileged domain disabled
> > Allocating PCI resources starting at 20000000 (gap: 10800000:ef800000)
> > Detected 6396.277 MHz processor.
> > Built 1 zonelists.  Total pages: 67584
> > Kernel command line: root=/dev/hda1 ro
> > Enabling fast FPU save and restore... done.
> > Enabling unmasked SIMD FPU exception support... done.
> > Initializing CPU#0
> > PID hash table entries: 2048 (order: 11, 8192 bytes)
> > Xen reported: 3200.122 MHz processor.
> > Console: colour dummy device 80x25
> > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> > Software IO TLB disabled
> > vmalloc area: d1000000-f51fe000, maxmem 2d7fe000
> > Memory: 251788k/270336k available (2056k kernel code, 10352k reserved,
> > 712k data, 196k init, 0k highmem)
> > Checking if this processor honours the WP bit even in supervisor mode...
> > Ok.
> > calibrate_delay_direct() failed to get a good estimate for
> > loops_per_jiffy.
> > Probably due to long platform interrupts. Consider using "lpj=" boot
> > option.
> >
> > Security Framework v1.0.0 initialized
> > Capability LSM initialized
> > Mount-cache hash table entries: 512
> > CPU: Trace cache: 12K uops, L1 D cache: 16K
> > CPU: L2 cache: 2048K
> > Checking 'hlt' instruction... OK.
> > SMP alternatives: switching to UP code
> > Freeing SMP alternatives: 16k freed
> > Brought up 1 CPUs
> > migration_cost=0
> > checking if image is initramfs... it is
> > Freeing initrd memory: 3552k freed
> > NET: Registered protocol family 16
> > Brought up 1 CPUs
> > PCI: setting up Xen PCI frontend stub
> > ACPI: Interpreter disabled.
> > Linux Plug and Play Support v0.97 (c) Adam Belay
> > pnp: PnP ACPI: disabled
> > xen_mem: Initialising balloon driver.
> > PCI: System does not support PCI
> > PCI: System does not support PCI
> > NET: Registered protocol family 2
> > IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> > TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> > TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
> > TCP: Hash tables configured (established 16384 bind 8192)
> > TCP reno registered
> > IA-32 Microcode Update Driver: v1.14a-xen <tigran@xxxxxxxxxxx>
> > audit: initializing netlink socket (disabled)
> > audit(1206465527.468:1): initialized
> >
> > VFS: Disk quotas dquot_6.5.1
> > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> > Initializing Cryptographic API
> > io scheduler noop registered
> > io scheduler anticipatory registered
> > io scheduler deadline registered
> > io scheduler cfq registered (default)
> > Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15
> > (usb?)
> > Failed to obtain physical IRQ 6
> > floppy0: Unable to grab DMA2 for the floppy driver
> > floppy0: no floppy controllers found
> > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> > loop: loaded (max 8 devices)
> > Xen virtual console successfully installed as xvc0
> > Event-channel device installed.
> > netfront: Initialising virtual ethernet driver.
> > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> > ide: Assuming 50MHz system bus speed for PIO modes; override with
> > idebus=xx
> > PNP: No PS/2 controller found. Probing ports directly.
> > i8042.c: No controller found.
> > mice: PS/2 mouse device common for all mice
> > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> > md: bitmap version 4.39
> > NET: Registered protocol family 1
> > NET: Registered protocol family 17
> > Using IPI No-Shortcut mode
> > xen-vbd: registered block device major 3
> > blkfront: hda1: barriers enabled
> > XENBUS: Device with no driver: device/console/0
> > BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> > EDD information not available.
> > Freeing unused kernel memory: 196k freed
> > usbcore: registered new driver usbfs
> > usbcore: registered new driver hub
> > USB Universal Host Controller Interface driver v3.0
> > SCSI subsystem initialized
> > Fusion MPT base driver 3.04.01
> > Copyright (c) 1999-2005 LSI Logic Corporation
> > Fusion MPT SPI Host driver 3.04.01
> > kjournald starting.  Commit interval 5 seconds
> > EXT3-fs: mounted filesystem with ordered data mode.
> > Kernel panic - not syncing: Attempted to kill init!
> >
> >
> > ------------------------------------------------------------------------------------------------------------------------
> > Thanks,
> > Girish
> >
> >
> >
> > On Tue, Mar 25, 2008 at 12:22 PM, Igor Chubin <igor@xxxxxxx> wrote:
> >
> > > On Di, Mär 25, 2008 at 10:29:25 -0400, weiming wrote:
> > > > seems that the driver for your hard driver controllers was not
> > > included in
> > > > the image file.
> > >
> > >
> > > Real hard disk controller is not (and should not be!)
> > > visible in a guest domain.
> > > Guest domain uses PV-interfaces to the domain 0
> > > to access devices.
> > >
> > > Try to edit your config
> > > and change sda to hda:
> > >
> > > ====================================================
> > > kernel = "/boot/vmlinuz-2.6.18.8-xen"
> > > ramdisk = "/boot/initrd.img-2.6.18.8-xen"
> > > memory = 256
> > > name = "fc6"
> > > vif = [ 'bridge=xenbr0' ]
> > > disk = [ 'file:/second/fc6_domudisk,hda1,w' ]
> > > root = "/dev/hda1 ro"
> > > ====================================================
> > >
> > >
> > >
> > > >
> > > > On Tue, Mar 25, 2008 at 9:35 AM, Girish V <girish.xen@xxxxxxxxx>
> > > wrote:
> > > >
> > > > > The bootup message after using the ramdisk is shown below.
> > > > > Thanks
> > > > > Girish
> > > > >
> > > > >
> > > --------------------------------------------------------------------------------------------------------
> > > > >
> > > > > [root@localhost second]# xm create -c file-config-rh9_diskimg
> > > > > Using config file "./file-config-rh9_diskimg".
> > > > > Started domain fc6_new
> > > > >                       Linux version 2.6.18.8-xen (
> > > > > root@xxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070626 (Red Hat
> > > 4.1.2-13))
> > > > > #2 SMP Thu Mar 20 17:40:00 EDT 2008
> > > > > BIOS-provided physical RAM map:
> > > > >  Xen: 0000000000000000 - 0000000010800000 (usable)
> > > > > 0MB HIGHMEM available.
> > > > > 264MB LOWMEM available.
> > > > > ACPI in unprivileged domain disabled
> > > > > Allocating PCI resources starting at 20000000 (gap:
> > > 10800000:ef800000)
> > > > > Detected 3202.737 MHz processor.
> > > > > Built 1 zonelists.  Total pages: 67584
> > > > > Kernel command line: root=/dev/sda1 ro
> > > > > Enabling fast FPU save and restore... done.
> > > > > Enabling unmasked SIMD FPU exception support... done.
> > > > > Initializing CPU#0
> > > > > PID hash table entries: 2048 (order: 11, 8192 bytes)
> > > > > Xen reported: 3200.114 MHz processor.
> > > > > Console: colour dummy device 80x25
> > > > > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> > > > > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> > > > > Software IO TLB disabled
> > > > > vmalloc area: d1000000-f51fe000, maxmem 2d7fe000
> > > > > Memory: 251788k/270336k available (2056k kernel code, 10352k
> > > reserved,
> > > > > 712k data, 196k init, 0k highmem)
> > > > > Checking if this processor honours the WP bit even in supervisor
> > > mode...
> > > > > Ok.
> > > > > Calibrating delay using timer specific routine.. 6447.39 BogoMIPS
> > > > > (lpj=32236972)
> > > > > Security Framework v1.0.0 initialized
> > > > > Capability LSM initialized
> > > > > Mount-cache hash table entries: 512
> > > > > CPU: Trace cache: 12K uops, L1 D cache: 16K
> > > > > CPU: L2 cache: 2048K
> > > > > Checking 'hlt' instruction... OK.
> > > > > SMP alternatives: switching to UP code
> > > > > Freeing SMP alternatives: 16k freed
> > > > > Brought up 1 CPUs
> > > > > migration_cost=0
> > > > > checking if image is initramfs... it is
> > > > > Freeing initrd memory: 3552k freed
> > > > > NET: Registered protocol family 16
> > > > > Brought up 1 CPUs
> > > > > PCI: setting up Xen PCI frontend stub
> > > > > ACPI: Interpreter disabled.
> > > > > Linux Plug and Play Support v0.97 (c) Adam Belay
> > > > > pnp: PnP ACPI: disabled
> > > > > xen_mem: Initialising balloon driver.
> > > > > PCI: System does not support PCI
> > > > > PCI: System does not support PCI
> > > > > NET: Registered protocol family 2
> > > > > IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> > > > > TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> > > > > TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
> > > > > TCP: Hash tables configured (established 16384 bind 8192)
> > > > > TCP reno registered
> > > > > IA-32 Microcode Update Driver: v1.14a-xen <tigran@xxxxxxxxxxx>
> > > > > audit: initializing netlink socket (disabled)
> > > > > audit(1206452738.073:1): initialized
> > > > > VFS: Disk quotas dquot_6.5.1
> > > > > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> > > > > Initializing Cryptographic API
> > > > > io scheduler noop registered
> > > > > io scheduler anticipatory registered
> > > > > io scheduler deadline registered
> > > > > io scheduler cfq registered (default)
> > > > > Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type
> > > 15
> > > > > (usb?)
> > > > > Failed to obtain physical IRQ 6
> > > > > floppy0: Unable to grab DMA2 for the floppy driver
> > > > > floppy0: no floppy controllers found
> > > > > RAMDISK driver initialized: 16 RAM disks of 16384K size 1024
> > > blocksize
> > > > > loop: loaded (max 8 devices)
> > > > > Xen virtual console successfully installed as xvc0
> > > > > Event-channel device installed.
> > > > > netfront: Initialising virtual ethernet driver.
> > > > > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> > > > > ide: Assuming 50MHz system bus speed for PIO modes; override with
> > > > > idebus=xx
> > > > > PNP: No PS/2 controller found. Probing ports directly.
> > > > > i8042.c: No controller found.
> > > > > mice: PS/2 mouse device common for all mice
> > > > > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> > > > > md: bitmap version 4.39
> > > > > NET: Registered protocol family 1
> > > > > NET: Registered protocol family 17
> > > > > Using IPI No-Shortcut mode
> > > > > xen-vbd: registered block device major 8
> > > > > blkfront: sda1: barriers enabled
> > > > > XENBUS: Device with no driver: device/console/0
> > > > > BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> > > > > EDD information not available.
> > > > > Freeing unused kernel memory: 196k freed
> > > > > usbcore: registered new driver usbfs
> > > > > usbcore: registered new driver hub
> > > > > USB Universal Host Controller Interface driver v3.0
> > > > > SCSI subsystem initialized
> > > > > register_blkdev: cannot get major 8 for sd
> > > > > Fusion MPT base driver 3.04.01
> > > > > Copyright (c) 1999-2005 LSI Logic Corporation
> > > > > Fusion MPT SPI Host driver 3.04.01
> > > > > kjournald starting.  Commit interval 5 seconds
> > > > > EXT3-fs: mounted filesystem with ordered data mode.
> > > > > Kernel panic - not syncing: Attempted to kill init!
> > > > >
> > > > >
> > > > >
> > > > >
> > > --------------------------------------------------------------------------------------------------------
> > > > >
> > > > > On Sun, Mar 23, 2008 at 6:17 AM, Igor Chubin <igor@xxxxxxx> wrote:
> > > > >
> > > > > > On So, Mär 23, 2008 at 12:30:11 -0400, Girish V wrote:
> > > > > > > Hi Igor.
> > > > > > > Thanks for the suggestion. I did try using a ramdisk - and the
> > > bootup
> > > > > > of the
> > > > > > > domU goes a little bit furter, but init still crashes with the
> > > same
> > > > > > message
> > > > > > > as before.
> > > > > > > Any idea what I should do further?
> > > > > >
> > > > > >
> > > > > > What the last printed lines now?
> > > > > >
> > > > > > > Thanks,
> > > > > > > Girish
> > > > > > >
> > > > > > > On Sat, Mar 22, 2008 at 2:09 PM, Igor Chubin <igor@xxxxxxx>
> > > wrote:
> > > > > > >
> > > > > > > > On Mi, Mär 19, 2008 at 10:43:25 -0400, Girish V wrote:
> > > > > > > > > Hello,
> > > > > > > >
> > > > > > > > Hello Girish,
> > > > > > > >
> > > > > > > > ...
> > > > > > > >
> > > > > > > >
> > > > > > > > Try to specify ramdisk here:
> > > > > > > >
> > > > > > > > (check path in my example)
> > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > ----------------------------------------------------------------------------------------------------------------
> > > > > > > > >
> > > > > > > > > kernel = "/boot/vmlinuz-2.6.18.8-xen"
> > > > > > > > ramdisk = "/boot/initrd.img-2.6.18.8-xen"
> > > > > > > > > memory = 256
> > > > > > > > > name = "fc6"
> > > > > > > > > vif = [ 'bridge=xenbr0' ]
> > > > > > > > > disk = [ 'file:/second/fc6_domudisk,sda1,w' ]
> > > > > > > > > root = "/dev/sda1 ro"
> > > > > > > > >
> > > > > > > >
> > > > > >
> > > ----------------------------------------------------------------------------------------------------------------
> > > > > > > > >
> > > > > > > > --
> > > > > > > > WBR, i.m.chubin
> > > > > > > >
> > > > > > > >
> > > > > >
> > > > > > > _______________________________________________
> > > > > > > Xen-users mailing list
> > > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > http://lists.xensource.com/xen-users
> > > > > >
> > > > > > --
> > > > > > WBR, i.m.chubin
> > > > > >
> > > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Xen-users mailing list
> > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > http://lists.xensource.com/xen-users
> > > > >
> > >
> > > --
> > > WBR, i.m.chubin
> > >
> > >
> >

-- 
WBR, i.m.chubin


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users