|   | 
      | 
  
  
      | 
      | 
  
 
     | 
    | 
  
  
     | 
    | 
  
  
    |   | 
      | 
  
  
    | 
         
xen-users
[Xen-users] AMD 64 X2 5200 - XEN only detects one core
 
I have an ACER AM3100-UD5200A which uses an AMD 64 X2 5200.
  Xen only detects one of  two cores
  First I installed Fedora 8 + Xen that ships with the distro and found that only one core was detected when DOM0 booted. Out of frustration I decided to install CentOS 5.1 as a quick resolution to the problem, but found the same problem.
 
  checking /proc/cpuinfo  there is only one core [root@dom0 lib]# more /proc/cpuinfo  processor       : 0 vendor_id       : AuthenticAMD cpu family      : 15 model           : 67 model name      : AMD Athlon(tm) 64 X2 Dual Core Processor
 5200+ stepping        : 2 cpu MHz         : 2593.594 cache size      : 1024 KB physical id     : 0 siblings        : 1 core id         : 0 cpu cores       : 1 fpu             : yes fpu_exception   : yes cpuid level     : 1 wp              : yes flags           : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 clflush mmx fxsr sse sse2 ht sysca ll nx mmxext fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8_legacy bogomips        :
 6485.48 TLB size        : 1024 4K pages clflush size    : 64 cache_alignment : 64 address sizes   : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc
 
  Heres dmesg from CentOS
  Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet) Linux version 2.6.18-53.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070626 (Red Hat 4.1.2 -14)) #1 SMP Mon Nov 12 02:46:57 EST 2007 BIOS-provided physical RAM map:  Xen: 0000000000000000 - 00000000a5250000 (usable) On node 0 totalpages: 676432   DMA zone: 676432 pages, LIFO batch:31 DMI 2.5 present. ACPI: RSDP (v002 ACRSYS                                ) @ 0x00000000000f80c0 ACPI: RSDT
 (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ 0x00000000affe3000 ACPI: FADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ 0x00000000affe3080 ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x00000000affe7cc0 ACPI: HPET (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000098) @ 0x00000000affe7f80 ACPI: SLIC (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000020) @ 0x00000000affe7fc0 ACPI: MCFG (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ 0x00000000affe8140 ACPI: MADT (v001 ACRSYS ACRPRDCT 0x42302e31 AWRD 0x00000000) @ 0x00000000affe7c40 ACPI: DSDT (v001 ACRSYS ACRPRDCT 0x00001000 MSFT 0x03000000) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02]
 address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override.Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2593.594 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Software IO TLB enabled:   Aperture:     64 megabytes  Kernel range: 0xffff880004847000 - 0xffff880008847000 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 2563840k/2705728k available (2357k kernel code, 133072k reserved, 1326k data, 172k init) Calibrating delay using timer specific routine..
 6485.48 BogoMIPS (lpj=12970967) Security Framework v1.0.0 initialized SELinux:  Initializing. SELinux:  Starting in permissive mode selinux_register_security:  Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 (SMP-)alternatives turned off ACPI: Core revision 20060707 Brought up 1 CPUs sizeof(vma)=168 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=216 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=96 bytes sizeof(skbuff)=240 bytes
  ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to xen Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at b4000000
 (gap: b0000000:30000000) Built 1 zonelists.  Total pages: 676432
 
 
 
 
  [2007-12-18 01:59:05 xend.XendDomainInfo 3028] DEBUG (XendDomainInfo:756) Storing VM details: {'shadow_me mory': '0', 'uuid': '00000000-0000-0000-0000-000000000000', 'on_reboot': 'restart', 'on_poweroff': 'destr oy', 'name': 'Domain-0', 'xend/restart_count': '0', 'vcpus': '1', 'vcpu_avail': '1', 'memory': '2635', 'o n_crash': 'restart', 'maxmem': '2635'}
 
 
 
   
       Never miss a thing.   Make Yahoo your homepage.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users 
 |   
 
| <Prev in Thread] | 
Current Thread | 
[Next in Thread> |  
- [Xen-users] AMD 64 X2 5200 - XEN only detects one core,
Darryl Bowler <=
  
 |  
  
 | 
    | 
  
  
    |   | 
    |