Maybe I’m going about this the wrong way, but I want
to create 10 virtual domains each with their own IP (172.16.10.150 ->
172.16.10.160)
I was using virt-install, but I then have to modify the
kickstart file, changing the IP address manually each time. Is there an easier
way where I can specify the IP address for eth0 on the command line?
virt-install
-p—location=http://172.16.10.101/x86_64/—noautoconsole—file=/dev/vg_xen/lv_dom1—name=dom1—ram=4096—vnc
-x “ks=http://172.16.10.101/ks.cfg ip=172.16.10.150 netmask=255.255.255.0
dns=65.24.7.6 gateway=172.16.10.1”
My kickstart file:
#platform=x86, AMD64, or Intel EM64T
# System authorization information
auth --useshadow --enablemd5
# System bootloader configuration
bootloader --location=mbr
# Partition clearing information
clearpart --all --initlabel
# Use text mode install
text
# Firewall configuration
firewall --disabled
# Run the Setup Agent on first boot
firstboot --disable
# System keyboard
keyboard us
# System language
lang en_US
# Installation logging level
logging --level=info
# Use network installation
url --url="">
# Network information
network --bootproto=static --device=eth0
--gateway=172.16.10.1 --ip=172.16.10.150 --nameserver=172.16.10.1
--netmask=255.255.255.0 -->
#Root password
rootpw password
# SELinux configuration
selinux --disabled
# Do not configure the X Window System
skipx
# System timezone
timezone America/Los_Angeles
# Install OS instead of upgrade
install
# Disk partitioning information
part /boot --fstype="ext3" --size=100
part pv.2 --size=0 --grow
volgroup VolGroup00 pv.2
logvol swap --fstype="swap" --name=LogVol01
--vgname=VolGroup00 --size=2048
logvol / --fstype="ext3" --name=LogVol00
--vgname=VolGroup00 --size=1 --grow
%packages
@base
@mysql
@mail-server
@web-server
@dns-server
@ftp-server
Home