[Xen-users] Not getting the IPAddress for domanU

Hi,

I have installed the xen3.0 on fedora core 5.0. The installation of Domain0 is successful. But when I try to create the domainU on domain0

It won’t get the IPAddress.

If I will run the ipconfig command on domain0 it will show me the following output.

eth0 Link encap:Ethernet HWaddr 00:13:D4:E7:57:FD

inet addr:10.112.69.109 Bcast:10.112.69.255 Mask:255.255.255.0

inet6 addr: fe80::213:d4ff:fee7:57fd/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:395857 errors:0 dropped:0 overruns:0 frame:0

TX packets:26652 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:384411644 (366.6 MiB) TX bytes:3629384 (3.4 MiB)

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:2061 errors:0 dropped:0 overruns:0 frame:0

TX packets:2061 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:1980509 (1.8 MiB) TX bytes:1980509 (1.8 MiB)

peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF

inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link

UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1

RX packets:607079 errors:0 dropped:0 overruns:0 frame:0

TX packets:26687 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:667765297 (636.8 MiB) TX bytes:3652288 (3.4 MiB)

Interrupt:17 Base address:0xe000

vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF

inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:26652 errors:0 dropped:0 overruns:0 frame:0

TX packets:395859 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:3629384 (3.4 MiB) TX bytes:384413244 (366.6 MiB)

xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF

inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:151789 errors:0 dropped:0 overruns:0 frame:0

TX packets:6 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:90377934 (86.1 MiB) TX bytes:468 (468.0 b)

…………………………………………….

And the brctl show will show the following…!!

bridge name bridge id STP enabled interfaces

xenbr0 8000.feffffffffff no peth0

vif0.0

I have attached the xen-confix.sxp with this mail..

Please some body help me…!!

HCL TECHNOLOGIES|HCL

"It is wise to direct your anger towards problems -- not people,

Nitesh Gangarde
MTS

HCL Technologies
A 8/9 Sec-60 NOIDA

nitesh.g@xxxxxxxxxxxxxxxxx

mobile:

9911338963

Add me to your address book...

Want a signature like this?

DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have
received this email in error please delete it and notify the sender immediately. Before opening any mail and
attachments please check them for viruses and defect.

-----------------------------------------------------------------------------------------------------------------------

xend-config.sxp
Description: xend-config.sxp

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

WARNING - OLD ARCHIVES

xen-users

[Xen-users] Not getting the IPAddress for domanU