WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] pcifront pci-0: pciback not responding (tg3)

I just duplicated your pci not responding error.  I seem to hit it only
if I have my domU configured to use 4 processors.  If I use less than
that my nic is up and working just fine.  I'll file a bug against
SLES10.  Does yours work if you use 1 proc? 


 

Thanks,
Glen


>>> <buw20031220@xxxxxxxxxxxxxx> 06/01/06 5:30 pm >>> 

> It is working for me on SLES10 RC2 x86_64, using the config in my
> previous post, I know this was busted in some earlier betas though.
>  
good to hear this.

I just downloaded SLES10 xen build 9697 and the problem has slightly,
changed.
If a Network is specified in domU /etc/sysconfig/network/ifcfg- eth-
id- 00\:...
domU hangs in the boot.
 
domU dmesg:

pcifront pci- 0: pciback not responding!!!
tg3.c:v3.49 (Feb 2, 2006)
pcifront pci- 0: pciback not responding!!!
pcifront pci- 0: pciback not responding!!!
PCI: Enabling device 0000:00:00.1 (0000 - > 0002)
pcifront pci- 0: pciback not responding!!!
pcifront pci- 0: pciback not responding!!!
pcifront pci- 0: pciback not responding!!!
pcifront pci- 0: pciback not responding!!!
PCI: Setting latency timer of device 0000:00:00.1 to 64
pcifront pci- 0: pciback not responding!!!
pcifront pci- 0: pciback not responding!!!
tg3: Cannot find PowerManagement capability, aborting.
pcifront pci- 0: pciback not responding!!!
tg3: probe of 0000:00:00.1 failed with error - 5
Uniform Multi- Platform E- IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
SCSI subsystem initialized
Driver 'sd' needs updating -  please use bus_type methods
st: Version 20050830, fixed bufsize 32768, s/g segs 256
tg3.c:v3.49 (Feb 2, 2006)
eth0: Tigon3 [partno(349321- 001) rev 2100 PHY(5704)] (PCIX:100MHz:64-
bit)
10/100/1000BaseT Ethernet 00:17:08:4c:fe:f5
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
TSOcap[1] 
eth0: dma_rwctrl[769f4000] dma_mask[64- bit]
pcifront pci- 0: pciback not responding!!!
pcifront pci- 0: pciback not responding!!!


dom0 boot parameter "pci=noacpi" won't help here, in this case the
system won't
boot at all.

So is it a problem specific to the Networking card ? Using bnx2 instead
does not
work at all.

_______________________________________________
Xen- users mailing list
Xen- users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen- users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users