WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

RE: [Xen-users] Device eth0 does not seem to be present

To: "'Phil Evans'" <xenmail@xxxxxxxxxxxx>
Subject: RE: [Xen-users] Device eth0 does not seem to be present
From: "Mito" <mito@xxxxxxxxxxxxx>
Date: Sun, 23 Apr 2006 01:13:37 -0400
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Delivery-date: Sat, 22 Apr 2006 22:06:54 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
In-reply-to: <444AFB14.7040901@xxxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: AcZmihkkqT7H4nFFTYKzAOW7DkYDiAACoTvg
That was it!!!!

Awesome, thanks!

-----Original Message-----
From: Phil Evans [mailto:xenmail@xxxxxxxxxxxx] 
Sent: Saturday, April 22, 2006 11:57 PM
To: Mito
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Device eth0 does not seem to be present

Are you using the stock FC5 Xen kernels? If so, you will need to add the 
following line to the /etc/modprobe.conf files in your domU:

alias eth0 xennet

For some reason the Fedora guys decided to make xennet a module as 
opposed to compiled in, so you need to specify the module be loaded. I 
have come across this problem myself. It took me quite a while to figure 
out.

Thanks,
Phil Evans.


Mito wrote:
>
> Tried that too, yelled at me telling me that it's depreciated and that 
> it was being ignored.
>
> See what I mean, it makes no sense why it's not working..
>
> ------------------------------------------------------------------------
>
> *From:* xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] *On Behalf Of *Itamar 
> Reis Peixoto
> *Sent:* Saturday, April 22, 2006 9:05 PM
> *To:* Mito; xen-users@xxxxxxxxxxxxxxxxxxx
> *Subject:* Re: [Xen-users] Device eth0 does not seem to be present
>
> nics = 1
>
>     Ah, sorry, I C&P'd out of nano, it is closed but was off the screen.
>
>     The line is closed properly, here is that entire line.
>
>     disk = ['file:/guests/scalix-base.img,sda1,w',
>     'file:/guests/scalix-base.swap,sda2,w']
>
>     Thanks though!
>
>     Also, I've tried specifying a mac address in the vif = [ '' ]
>     section as well, but that didn't do any good.
>
>     I checked the xend-config.sxp and the network is set to be bridged
>     (as is set by default).
>
>     Any other ideas?
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users