| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Hi,
could it be that the bridge not gets detected cause I boot with the
"noapic" option ?
I boot the native kernel also with "noapic" and there it gets detected,
but maybe under xen this behaves differend.
I need "noapic", because otherwise sata_nv would crash.
/sebastian
Sebastian Böhm schrieb:
Can you verify that any config options for your board that are enabled in your
native Linux build are also enabled under the Xen 3-patched Linux kernel?
100% sure.
I tested also with the http://xenbits.xensource.com/linux-2.6-xen.hg
kernel.
I made one with "Xen-Compatible" and one with "PC-Compatible", so all
device options are 100% the same.
The direct-booted "PC-Compatible" Kernel detected the PCI-Bus behind
that amd-8131 bridge, the "Xen-Compatible" kernel booted with
xen3-unstable did not detect the PCI-X Bridge and all devices behind it.
So there must be a problem with xen, I presume.
/sebastian
Cheers,
Mark
------------------------------------------------------------------------
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home