WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] VIA sata + Xen 3.0 boot lockup problems

To: Randolph Oliveira <rlinuxbr@xxxxxxxxxxxx>
Subject: Re: [Xen-users] VIA sata + Xen 3.0 boot lockup problems
From: Jerone Young <jyoung5@xxxxxxxxxx>
Date: Thu, 15 Dec 2005 10:24:03 -0600
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Delivery-date: Thu, 15 Dec 2005 16:26:05 +0000
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <20051215133113.5117.qmail@xxxxxxxxxxxxxxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
References: <20051215133113.5117.qmail@xxxxxxxxxxxxxxxxxxxxxxx>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Looking at your output..try booting Xen with command line perameter
"acpi=off" and see what happens.
                

On Thu, 2005-12-15 at 13:31 +0000, Randolph Oliveira wrote:
> Hello!
> 
> I`m trying to boot a via sata machine with xen 3.0
> with no sucess. It just freezes at this point:
> 
> *********
> ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] ->
> GSI 10 (level,low) -> IRQ 10
> sata_via (0000:00:0f.0): routed to hard irq line 10
> ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma
> 0xEF90 irq 10
> ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma
> 0xEF98 irq 10
> ata1: dev 0 ATA, max UDMA/133, 156301488 sectors:
> lba48
> *********
> 
> and then only a hard reset modifies this state. the
> hard disc seems to be detected but i don`t have a clue
> what`s going on. I`ve beeing running xen 2.0.7 on this
> machine without any problems. Below is attached a
> lspci output:
> 
> lspci:
> 
> 0000:00:00.0 Host bridge: VIA Technologies, Inc.
> VT8374 P4X400 Host Controller/AGP Bridge (rev 82)
> 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237
> PCI Bridge
> 0000:00:0f.0 RAID bus controller: VIA Technologies,
> Inc. VIA VT6420 SATA RAID Controller (rev 80)
> 0000:00:0f.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master
> IDE (rev 06)
> 0000:00:10.0 USB Controller: VIA Technologies, Inc.
> VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 0000:00:10.1 USB Controller: VIA Technologies, Inc.
> VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 0000:00:10.2 USB Controller: VIA Technologies, Inc.
> VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 0000:00:10.3 USB Controller: VIA Technologies, Inc.
> VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 0000:00:10.4 USB Controller: VIA Technologies, Inc.
> USB 2.0 (rev 86)
> 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237
> ISA bridge [K8T800 South]
> 0000:00:11.5 Multimedia audio controller: VIA
> Technologies, Inc. VT8233/A/8235/8237 AC97 Audio
> Controller (rev 60)
> 0000:00:12.0 Ethernet controller: VIA Technologies,
> Inc. VT6102 [Rhine-II] (rev 78)
> 0000:01:00.0 VGA compatible controller: nVidia
> Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1)
> 
> Any help is appreciated!
> 
> Thanks,
> Randolph
> 
> 
>       
> 
> 
> 
>       
>               
> _______________________________________________________ 
> Yahoo! doce lar. Faça do Yahoo! sua homepage. 
> http://br.yahoo.com/homepageset.html 
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>