That is really weird. I verify again and start everything from scatch. But
it doesn't work for me...
Thank you anyway.
Regards,
Wei Huang
On Fri, 4 Nov 2005, Puthiyaparambil, Aravindh wrote:
> Yes, I saw that problem and removing the vif line or changing it to vif0
> fixed it for me.
>
> Aravindh
>
> > -----Original Message-----
> > From: wei huang [mailto:huanwei@xxxxxxxxxxxxxxxxxx]
> > Sent: Friday, November 04, 2005 12:14 PM
> > To: Puthiyaparambil, Aravindh
> > Cc: Mark Williamson; xen-users@xxxxxxxxxxxxxxxxxxx; ewan@xxxxxxxxxxxxx
> > Subject: RE: [Xen-users] Error "Device 0 (vif) could not be connected"
> >
> > Hi
> >
> > Thank you for your suggestion.
> >
> > I do have a vif line in my config:
> > vif = [ 'mac=aa:00:00:00:01:05, bridge=xenbr0' ]
> >
> > But unfortunately, I tried either change it to vif0 or remote it. I
> get
> > the same error:
> > #c4xen# /etc/xen> sudo xm create -c as4_conf
> > Using config file "as4_conf".
> > Error: Error creating domain: Device 0 (vif) could not be connected.
> > Backend device not found!
> >
> > Do you see the same problem and you fix that in this way?
> >
> > Thank you again!
> >
> > Regards,
> > Wei Huang
> >
> > On Fri, 4 Nov 2005, Puthiyaparambil, Aravindh wrote:
> >
> > > I think you have a line that say "vif=.." in your DomU config. Make
> that
> > > line vif0 or delete it. That should get you going. Though I am not
> sure
> > > if this is a bug.
> > >
> > > Cheers,
> > > Aravindh
> > >
> > > > -----Original Message-----
> > > > From: Mark Williamson [mailto:mark.williamson@xxxxxxxxxxxx]
> > > > Sent: Friday, November 04, 2005 11:32 AM
> > > > To: xen-users@xxxxxxxxxxxxxxxxxxx
> > > > Cc: ewan@xxxxxxxxxxxxx; wei huang
> > > > Subject: Re: [Xen-users] Error "Device 0 (vif) could not be
> connected"
> > > >
> > > > I also saw this error (on yesterday's pull), haven't had to
> diagnose
> > > it
> > > > yet.
> > > >
> > > > Apparently this message is something to do with Xend detecting a
> > > failure /
> > > > problem with the hotplug scripts... Ewan (cc'ed) suggested I
> check my
> > > > hotplug / udev setup was working and that I look for
> hotplug-related
> > > > errors
> > > > in the main syslog.
> > > >
> > > > HTH,
> > > > Mark
> > > >
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home