WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-devel] RE: [Xen-users] Network performance - sending from VM to

To: Cherie Cheung <ccyxen@xxxxxxxxx>
Subject: Re: [Xen-devel] RE: [Xen-users] Network performance - sending from VM to VM using TCP
From: Bin Ren <bin.ren@xxxxxxxxx>
Date: Fri, 27 May 2005 17:45:09 +0100
Cc: Ian Pratt <m+Ian.Pratt@xxxxxxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx
Delivery-date: Fri, 27 May 2005 16:44:30 +0000
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:reply-to:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=T4aWvJPIGbdYzMwlIGsTFHzt1zT9FZHj1oiEEXiebGCJUwslc3aAMy2Xoxa71KsoTv24TexF1+FVHl2McFyfNO5Lt5ADF8YZEOe05JcqQz+Fs4QXNDhhlaYJUAg4L3cWzAdmOWIcI+K1Wq9C9OGEp7FYhmubj15ZDa+dQx9iwrM=
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <A95E2296287EAD4EB592B5DEEFCE0E9D1E424F@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
References: <A95E2296287EAD4EB592B5DEEFCE0E9D1E424F@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Reply-to: bin.ren@xxxxxxxxxxxx
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
Cherie:

I've tried to repeat the testing and here are the results:

Basic set up: xen machine runs latest xen-unstable and Debian sarge;
server runs latest Gentoo linux (native). both have intel e1000 mt
NICs and connect directly throught a 1Gbps switch.

(1) AFAIK, dummynet is for FreeBSD only, so I use the Linux kernel
network emulator module
(http://developer.osdl.org/shemminger/netem/index.html) and sets the
delay of server eth0 to 10ms using command 'tc qdisc add dev eth0 root
netem delay 10ms'.

(2) With linux kernel default networking settings, (i.e. no tcp
tuning): netperf -H server -l 30:

without delay, without tuning
dom0->server: 665Mbps
dom1->server: 490Mbps

with 10ms delay, without tuning
dom0->server: 82Mbps
dom1->server: 73Mbps

Note that *both* dom0 and dom1 show significant throughput drops. This
is different from what you've seen.

(3) Add linux tcp tuning
(http://www-didc.lbl.gov/TCP-tuning/linux.html), netperf -H server -l
30:

without delay, with tuning
dom0->server: 654Mbps
dom1->server: 488Mbps

with 10ms delay, with tuning
dom0->server: 610Mbps
dom1->server: 480Mbps

Note: without delay, tuning doesn't provide gains in throughputs.
however, with delay, both dom0 and dom1 see only *slight* drop in
throughputs. This makes sense as linux tcp/ip stack needs tuning for
very long-fat pipes. In your case, 300Mbps + 80ms seems to emulate
transcontinental links. Still, YMMV.

- Bin

On 5/27/05, Ian Pratt <m+Ian.Pratt@xxxxxxxxxxxx> wrote:
>  > I have been simulating a network using dummynet and
> > evaluating it using netperf. Xen3.0-unstable is used and the
> > VMs are vmlinuz-2.6.11-xenU. The simulated link is 300Mbps
> > with 80ms RTT.
> > Using netperf, I sent data using TCP from domain-0 of machine
> > 1 to domain-0 of machine 2. Then I repeat the experiment, but
> > this time from VM-1 of machine 1 to VM-1 of machine 2.
> >
> > However, the performance across the two VMs is substantially
> > worse than that across domain-0. Here's the result:
> 
> Someone else was having problems with low performance via dummynet a
> couple of months back. It's presumably dummynet's packet scheduling
> causing some bad interaction with the batch processing of packets in
> netfront/back.
> 
> The first step to understanding this is probably to capture a tcpdump
> and look at it with tcptrace to see what's happening with window sizes
> and scheduling of packets.
> 
> Ian
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

<Prev in Thread] Current Thread [Next in Thread>