Index: 2005-12-16/include/asm-i386/mach-xen/asm/pci.h =================================================================== --- 2005-12-16.orig/include/asm-i386/mach-xen/asm/pci.h 2005-11-21 16:42:07.000000000 +0100 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,150 +0,0 @@ -#ifndef __i386_PCI_H -#define __i386_PCI_H - -#include - -#ifdef __KERNEL__ -#include /* for struct page */ - -/* Can be used to override the logic in pci_scan_bus for skipping - already-configured bus numbers - to be used for buggy BIOSes - or architectures with incomplete PCI setup by the loader */ - -#ifdef CONFIG_PCI -extern unsigned int pcibios_assign_all_busses(void); -#else -#define pcibios_assign_all_busses() 0 -#endif -#define pcibios_scan_all_fns(a, b) 0 - -extern unsigned long pci_mem_start; -#define PCIBIOS_MIN_IO 0x1000 -#define PCIBIOS_MIN_MEM (pci_mem_start) - -#define PCIBIOS_MIN_CARDBUS_IO 0x4000 - -void pcibios_config_init(void); -struct pci_bus * pcibios_scan_root(int bus); - -void pcibios_set_master(struct pci_dev *dev); -void pcibios_penalize_isa_irq(int irq, int active); -struct irq_routing_table *pcibios_get_irq_routing_table(void); -int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq); - -/* Dynamic DMA mapping stuff. - * i386 has everything mapped statically. - */ - -#include -#include -#include -#include -#include - -struct pci_dev; - -#ifdef CONFIG_SWIOTLB - - -/* On Xen we use SWIOTLB instead of blk-specific bounce buffers. */ -#define PCI_DMA_BUS_IS_PHYS (0) - -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) - -#else - -/* The PCI address space does equal the physical memory - * address space. The networking and block device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - -/* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - -#endif - -/* This is always fine. */ -#define pci_dac_dma_supported(pci_dev, mask) (1) - -static inline dma64_addr_t -pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction) -{ - return ((dma64_addr_t) page_to_phys(page) + - (dma64_addr_t) offset); -} - -static inline struct page * -pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr) -{ - return pfn_to_page(dma_addr >> PAGE_SHIFT); -} - -static inline unsigned long -pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr) -{ - return (dma_addr & ~PAGE_MASK); -} - -static inline void -pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction) -{ -} - -static inline void -pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction) -{ - flush_write_buffers(); -} - -#define HAVE_PCI_MMAP -extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine); - - -static inline void pcibios_add_platform_entries(struct pci_dev *dev) -{ -} - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif - -#endif /* __KERNEL__ */ - -/* implement the pci_ DMA API in terms of the generic device dma_ one */ -#include - -/* generic pci stuff */ -#include - -/* On Xen we have to scan all functions since Xen hides bridges from - * us. If a bridge is at fn=0 and that slot has a multifunction - * device, we won't find the additional devices without scanning all - * functions. */ -#undef pcibios_scan_all_fns -#define pcibios_scan_all_fns(a, b) 1 - -#endif /* __i386_PCI_H */ Index: 2005-12-16/include/asm-i386/pci.h =================================================================== --- 2005-12-16.orig/include/asm-i386/pci.h 2005-11-21 16:42:07.000000000 +0100 +++ 2005-12-16/include/asm-i386/pci.h 2005-12-20 17:04:38.512871960 +0100 @@ -43,6 +43,26 @@ int pcibios_set_irq_routing(struct pci_d struct pci_dev; +#ifdef CONFIG_SWIOTLB + +/* On Xen we use SWIOTLB instead of blk-specific bounce buffers. */ +#define PCI_DMA_BUS_IS_PHYS (0) + +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) + +#else + /* The PCI address space does equal the physical memory * address space. The networking and block device layers use * this boolean for bounce buffer decisions. @@ -57,6 +77,8 @@ struct pci_dev; #define pci_unmap_len(PTR, LEN_NAME) (0) #define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) +#endif + /* This is always fine. */ #define pci_dac_dma_supported(pci_dev, mask) (1) @@ -117,4 +139,13 @@ static inline void pci_dma_burst_advice( /* generic pci stuff */ #include +#ifdef CONFIG_X86_XEN +/* On Xen we have to scan all functions since Xen hides bridges from + * us. If a bridge is at fn=0 and that slot has a multifunction + * device, we won't find the additional devices without scanning all + * functions. */ +#undef pcibios_scan_all_fns +#define pcibios_scan_all_fns(a, b) 1 +#endif + #endif /* __i386_PCI_H */