RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result

[Akio Takebe <takebe_akio@xxxxxxxxxxxxxx>]

Hi, Yongkang

I think this issue is configuration mistakes.
Can you try the following configuration?
I cannot try it because I meet another issue...

1. /etc/modprobe.conf for initrd of domU
The following configuration would solve the issue of booting domU.
    [root@tiger156 xen]# cat /etc/modprobe.conf 
    #alias eth0 e1000
    #alias scsi_hostadapter mptbase
    #alias scsi_hostadapter1 mptspi
    alias eth0 xennet  <----this
    alias scsi_hostadapter xenblk <----and this


2. domU.conf
The following configuration would solve the issue of probing ide disk.
    kernel = "vmlinuz-2.6.17-1.2630.fc6xen"
    ramdisk = "initrd-2.6.17-1.2630.fc6xenU.img"
    memory = 512
    name = "domU"
    vif = [ '' ]
    disk = [ 'file:/xen/image/fc6.root.img,hda1,w' ]
    root = "/dev/hda1 ro"
    extra = "3 ide0=noprobe ide1=noprobe ide2=noprobe ide3=noprobe" <----this


Best Regards,

Akio Takebe

>Hi,
>
>I have reported 2 bugs to redhat bugzilla:
>[Bug 207227] New: Xen0 reboot command can not reboot Tiger4 machine.
>[Bug 207241] New: XenU domain can not be created successfully.
>New xenU created failure serial log has been pasted to the bug.
>
>I also notice FC6-test3 Xen0 operation is a little slower, compared with 
>RHEL4u3. I assign 2 vcpus to Xen0. When I destroy domains or do some heavy 
>IO operations, Xen0 operations will be blocked for a while. I didn't track 
>this to bugzilla. 
>
>There are also a lot of unaligned accessing from some applications. They 
>should be common FC6-test3 issues. 
>
>Sometime Xen0 monitor will print "Bug: soft lockup detected on CPU#0(or #1)"
>
>Best Regards,
>Yongkang (Kangkang) モタソオ
>
>>-----Original Message-----
>>From: xen-ia64-devel-bounces@xxxxxxxxxxxxxxxxxxx
>>[mailto:xen-ia64-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of You,
>>Yongkang
>>Sent: 2006ト\xF3ヤツ20ネユ 10:07
>>To: Yang, Fred; y-oguchi@xxxxxxxxxxxxxx; fedora-xen@xxxxxxxxxx
>>Cc: xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
>>Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
>>
>>Hi Fred & Yoshi,
>>
>>The former XenU creating failure issue seemed to be the config issue. Now I
>>can create XenU. But XenU booting process met an old bug. It will cost a 
>>long
>>time to check hard disk IRQ response from hda to hdh.
>>
>>After that, xenU met the problem of mounting root partition to start 
>>services,
>>and then XenU booting failed (Kill init). I am not sure if it is because 
>>initrd issue.
>>I will continue to check it.
>>
>>Best Regards,
>>Yongkang (Kangkang) モタソオ
>>
>>>-----Original Message-----
>>>From: xen-ia64-devel-bounces@xxxxxxxxxxxxxxxxxxx
>>>[mailto:xen-ia64-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Yang,
>>>Fred
>>>Sent: 2006ト\xF3ヤツ20ネユ 8:26
>>>To: y-oguchi@xxxxxxxxxxxxxx; fedora-xen@xxxxxxxxxx
>>>Cc: xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
>>>Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
>>>
>>>Here it comes!
>>>-Fred
>>>
>>>>-----Original Message-----
>>>>From: y-oguchi@xxxxxxxxxxxxxx [mailto:y-oguchi@xxxxxxxxxxxxxx]
>>>>Sent: Tuesday, September 19, 2006 4:23 PM
>>>>To: Yang, Fred; fedora-xen@xxxxxxxxxx
>>>>Cc: xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
>>>>Subject: Re: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
>>>>
>>>>Fred, Yongkang,
>>>>
>>>>> Other issues:
>>>>> 1) Xen0 operation is a little slower than RHEL4u3.
>>>>> 2) XenU creating failure, please see attachment for the serial output.
>>>>
>>>>I can't find the attachment.
>>>>Could you repost the serial log?
>>>>
>>>>Thanks,
>>>>Yoshi Oguchi
>>>>
>>>>"Yang, Fred" <fred.yang@xxxxxxxxx> wrote」コ
>>>>> Following is the quick Xen test result with FC6 Test3.  We will file
>>>>BZ for the issues tonight; the early data is to get community to fix Xen
>>>>issues ASAP
>>>>> Thanks,
>>>>> -Fred
>>>>>
>>>>> ====
>>>>> I have followed Redhat instructions (FC6-test3 can not be installed
>>>>from CDs) to install FC6-Test3 and do some testing.  Both Xen0 and VTI
>>>>can all boot up, but XenU couldn't be created successfully.
>>>>>
>>>>> Detailed Items:
>>>>> 1.  Using yum to upgrade FC6 Test2 to FC6 Test3    [almost Pass]
>>need
>>>>manually reinstall kernel-xen rpm package.
>>>>> 2.  Boot Native Linux of FC6 Test3   [Pass]
>>>>> 3.  Boot Xen of FC6 Test3   [Pass]
>>>>> 4.  xend and xm commands are working.    [Pass]
>>>>> 5.  XenU Domain creating failed.     [__FAIL__]
>>>>> 6.  Missing VTI guest firmware (/usr/lib/xen/boot/guest_firmware.bin)
>>>>    [__FAIL__ (expected)]
>>>>> 7.  After manually copy VTI guest firmware, creating VTI domain
>>>>[Pass]
>>>>> 8.    VTI domain with network supported     [Pass]
>>>>> 9.    2 VTI domains coexisting testing      [Pass]
>>>>> 10.   Linux Kernel build in VTI domain          [Pass]
>>>>> 11.   LTP testing in VTI domain          [Pass]
>>>>> 12.   SMP VTI domain          [Pass]
>>>>> 13.   SMP Xen0       [Pass]
>>>>> 14.   1 VTI Windows 2k3       [Pass] a little slower.
>>>>> 15.   1 VTI Linux + 1 VTI Windows    [__FAIL__ VTI Windows blue
>>>screen]
>>>>> 16.  Reboot machine failed with Xen FC6-test3. [__FAIL__]
>>>>>
>>>>> Other issues:
>>>>> 1) Xen0 operation is a little slower than RHEL4u3.
>>>>> 2) XenU creating failure, please see attachment for the serial output.
>>>>>
>>>>> Best Regards,
>>>>> Yongkang (Kangkang) モタソオ
>>>>>
>>>>> _______________________________________________
>>>>> Xen-ia64-devel mailing list
>>>>> Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
>>>>> http://lists.xensource.com/xen-ia64-devel
>>
>>_______________________________________________
>>Xen-ia64-devel mailing list
>>Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
>>http://lists.xensource.com/xen-ia64-devel
>
>_______________________________________________
>Xen-ia64-devel mailing list
>Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
>http://lists.xensource.com/xen-ia64-devel


_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel