Hi Philippe,
I think you used the default CSet 8241 of Xen3.0.Several patches has been
checked into Xen3.0testing tree. The latest CSet should be 8269 which has been
included tiger's configuration file Fred mentioned. Maybe you can use "hg co
-C" to get the latest CSet to try.
Thanks
Zhang Xiantao
CSD-OTC PRC Virtualization
Intel (China) Limited
-----Original Message-----
From: xen-ia64-devel-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-ia64-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Yang, Fred
Sent: 2006年1月7日 0:35
To: Philippe Berthault; Xen-IA64-Devel
Subject: RE: [Xen-ia64-devel] Help about a Kernel panic with Xen 3.0.0 onaTiger
system
Philippe,
This is because config file in Xen 3.0 does not work for Tiger system.
You can try Cset#8437 from
http://xenbits.xensource.com/ext/xen-ia64-unstable.hg the config file
has been validated to work for Tiger4
-Fred
Philippe Berthault wrote:
> I've tried Xen 3.0.0 (testing release) on a Tiger system (2 Itanium
> processors
> and 1 GB memory) but the boot is failed with a KERNEL PANIC..
>
> I'm using ELILO v3.5 pre2 which supports the "vmm" directive.
> The Linux used in domain0 is a RHEL-AS4, update 1.
>
> Anyone has an idea on what is the problem ?
> Thanks.
>
>
>
> MY ELILO ENTRY:
> ==============
>
> image=vmlinuz-2.6.12.6-xen0
> label=xen
> vmm=xen-3.0.0.gz
> initrd=initrd-2.6.12.6-xen0.img
> read-only
> append="com2=115200,8n1 console=com2 sched=bvt -- nomca
> console=ttyS1,115200 console=tty0 root=LABEL=/1234"
>
>
> THE BOOT TRACE FROM THE SERIAL LINE:
> ==================================
>
> Uncompressing Linux... done
> Loading file initrd-2.6.12.6-xen0.img...done
> Loading file vmlinuz-2.6.12.6-xen0...done
> Uncompressing... done
> __ __ _____ ___ ___
> \ \/ /___ _ __ |___ / / _ \ / _ \
> \ // _ \ '_ \ |_ \| | | | | | |
> / \ __/ | | | ___) | |_| | |_| |
> /_/\_\___|_| |_| |____(_)___(_)___/
>
> http://www.cl.cam.ac.uk/netos/xen
> University of Cambridge Computer Laboratory
>
> Xen version 3.0.0 (xen@xxxxxxxxxxxx) (version gcc 3.4.3 20050227 (Red
> Hat 3.4.3-22.1)) mar d..c 20 15:27:03 CET 2005
> Latest ChangeSet: unavailable
>
> (XEN) xen image pstart: 0x4000000, xenheap pend: 0x8000000
> (XEN) efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole
> at 0x0 (XEN) efi.trim_top: ignoring 24KB of memory at 0x1000 due to
> granule
> hole at 0x0
> (XEN) efi.trim_top: ignoring 8KB of memory at 0x7000 due to granule
> hole
> at 0x0
> (XEN) efi.trim_top: ignoring 484KB of memory at 0x9000 due to granule
> hole at 0x0
> (XEN) efi.trim_top: ignoring 4KB of memory at 0x84000 due to granule
> hole at 0x0
> (XEN) efi.trim_top: ignoring 108KB of memory at 0x85000 due to granule
> hole at 0x0
> (XEN) efi.trim_bottom: ignoring 15360KB of memory at 0x100000 due to
> granule hole at 0x0
> (XEN) ready to move Dom0 to 0x8000000 with len b7c460...ready to move
> initrd to 0x8b80000 with len 13e4f5...Done
> (XEN) find_memory: efi_memmap_walk returns max_page=ffb6
> (XEN) Before heap_start: 0xf0000000040e4960
> (XEN) After heap_start: 0xf0000000040ec000
> (XEN) Init boot pages: 0x1000000 -> 0x4000000.
> (XEN) Init boot pages: 0x8000000 -> 0x3c77e010.
> (XEN) Init boot pages: 0x3c77e070 -> 0x3c781f7f.
> (XEN) Init boot pages: 0x3c781fd2 -> 0x3c785000.
> (XEN) Init boot pages: 0x3c8c34f5 -> 0x3c8cc010.
> (XEN) Init boot pages: 0x3c8cc850 -> 0x3d8b4000.
> (XEN) Init boot pages: 0x3d900000 -> 0x3fa00000.
> (XEN) Init boot pages: 0x3fe98000 -> 0x3fed8000.
> (XEN) System RAM: 1001MB (1026000kB)
> (XEN) size of frame_table: 4608kB
> (XEN) alloc_dom0: starting (initializing 512 MB...)
> (XEN) alloc_dom0: dom0_start=0000000008000000
> (XEN) Xen heap: 63MB (64592kB)
> (XEN) ACPI: RSDP (v002 INTEL ) @
> 0x000000003ff98000
> (XEN) ACPI: XSDT (v001 INTEL SR870BH2 0x01072002 MSFT 0x00010013) @
> 0x000000003ff98090
> (XEN) ACPI: FADT (v003 INTEL SR870BH2 0x01072002 MSFT 0x00010013) @
> 0x000000003ff98138
> (XEN) ACPI: MADT (v001 INTEL SR870BH2 0x01072002 MSFT 0x00010013) @
> 0x000000003ff98230
> (XEN) ACPI: DSDT (v001 Intel SR870BH2 0x00000000 MSFT 0x0100000d) @
> 0x0000000000000000
> (XEN) SAL 3.1: Intel Corp
> SR870BH2 version 3.0
> (XEN) SAL Platform features: BusLock
> (XEN) avail:0x1180c60000000000,
> status:0x60000000000,control:0x1180c00000000000, vm?0x0
> (XEN) No VT feature supported.
> (XEN) cpu_init: current=f0000000040a4000,
> current->domain->arch.mm=0000000000000000
> (XEN) vhpt_init: vhpt size=0000000001000000, align=0000000001000000
> (XEN) vhpt_init: vhpt paddr=0000000005000000, end=0000000005ffffff
> (XEN) ACPI: Local APIC address 0xe8000000fee00000
> (XEN) ACPI: LSAPIC (acpi_id[0x00] lsapic_id[0x00] lsapic_eid[0x00]
> enabled) (XEN) CPU 0 (0x0000) enabled
> (XEN) ACPI: [APIC:0x07] ignored 1 entries of 2 found
> (XEN) ACPI: IOSAPIC (id[0x0] address[00000000fec00000] gsi_base[0])
> (XEN) ACPI: IOSAPIC (id[0x1] address[00000000fec10000] gsi_base[24])
> (XEN) ACPI: IOSAPIC (id[0x2] address[00000000fec20000] gsi_base[48])
> (XEN) ACPI: IOSAPIC (id[0x3] address[00000000fec30000] gsi_base[72])
> (XEN) ACPI: [APIC:0x06] ignored 1 entries of 5 found
> (XEN) ACPI: PLAT_INT_SRC (low level type[0x3] id[0x0000] eid[0x0]
> iosapic_vector[0x1e] global_irq[0x16]
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) 1 CPUs available, 1 CPUs total
> (XEN) machine to physical table: 0xf000000007f00000
> (XEN) About to call scheduler_init()
> (XEN) Using scheduler: Borrowed Virtual Time (bvt)
> (XEN) About to call init_xen_time()
> (XEN) CPU 0: base freq=199.460MHz, ITC ratio=14/2, ITC
> freq=1396.220MHz (XEN) Time init:
> (XEN) .... System Time: 1559165ns
> (XEN) .... scale: B75A20D1
> (XEN) About to call ac_timer_init()
> (XEN) About to call sort_main_extable()
> (XEN) About to call do_createdomain()
> (XEN) arch_vcpu_info=f000000007fd0000
> (XEN) ###allocating rid_range, domain f0000000040ec100:
> starting_rid=40000, ending_rid=80000
> (XEN) arch_do_create_domain: domain=f0000000040ec100
> (XEN) About to call construct_dom0()
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) METAPHYSICAL MEMORY ARRANGEMENT:
> (XEN) Kernel image: 4000000->4bd0e48
> (XEN) Entry address: 400ff20
> (XEN) Init. ramdisk: 27ac0000 len 13e4f5
> (XEN) Sync i/d cache for dom0 image SUCC
> (XEN) Dom0: 0xf0000000040ec100, domain: 0xf0000000040ec100
> (XEN) Domain0 EFI passthrough: MPS=3ff97000lxenable lsapic entry:
> 0xf00000003ff9825c
> (XEN) DISABLE lsapic entry: 0xf00000003ff98268
> (XEN) ACPI 2.0=3ff98000lx ACPI=3ff99000lx SMBIOS=f0000lx
> (XEN) domain mem: type=4, attr=0x8,
> range=[0x0000000008000000-0x0000000008100000) (1MB)
> (XEN) domain mem: type=13, attr=0x8,
> range=[0x0000000008100000-0x0000000008200000) (1MB)
> (XEN) domain mem: type=7, attr=0x8,
> range=[0x0000000008200000-0x0000000028000000) (510MB)
> (XEN) domain mem: type=12, attr=0x8000000000000001,
> range=[0x00000ffffc000000-0x0000100000000000) (64MB)
> (XEN) initrd start 27ac0000lx initrd size 13e4f5lxScrubbing Free RAM:
> ...........done.
> (XEN) About to call init_trace_bufs()
> (XEN) Xen trace buffers: disabled
> (XEN) About to call schedulers_start dom0=f0000000040ec100,
> idle0_dom=f0000000040d2e10
> (XEN) About to call startup_cpu_idle_loop()
> (XEN) idle0A
> (XEN) idle0D
> (XEN) Linux version 2.6.12.6-xen0 (xen@xxxxxxxxxxxxxxxxxxx) (version
> gcc
> 3.4.3 20050227 (Red Hat 3.4.3-22.1)) #1 SMP T5
> EFI v1.00 by Xen/ia64: SALsystab=0x8000178 MPS=0x3ff97000 ACPI
> 2.0=0x3ff98000 ACPI=0x3ff99000 SMBIOS=0xf0000
> warning: unable to switch EFI into virtual mode
> (status=9223372036854775811) Initial ramdisk at: 0xe000000027ac0000
> (1303797 bytes)
> SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
> vcpu_get_lid: WARNING: Getting cr.lid always returns zero
> (XEN) xen_pal_emulator: index=42
> (XEN) xen_pal_emulator: UNIMPLEMENTED PAL CALL 42!!!!
> (XEN) No logical to physical processor mapping available
> xen_pal_emulator: index=4
> (XEN) xen_pal_emulator: index=2
> (XEN) xen_pal_emulator: index=2
> (XEN) xen_pal_emulator: index=2
> (XEN) xen_pal_emulator: index=8
> (XEN) xen_pal_emulator: index=17
> (XEN) xen_pal_emulator: index=34
> (XEN) xen_pal_emulator: index=6
> (XEN) vcpu_set_itc: Setting ar.itc is currently disabled
> (XEN) **** vcpu_set_itv(65536): vitm=0, setting to 0
> (XEN) xen_pal_emulator: index=8
> (XEN) cpu_init: PAL VM summary failed, assuming 18 RID bits
> xen_pal_emulator: index=19
> (XEN) iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
> ACPI: Local APIC address c0000000fee00000
> PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000) vector
> 30 register_intr: changing vector 39 from IO-SAPIC-edge to
> IO-SAPIC-level vcpu_get_lid: WARNING: Getting cr.lid always returns
> zero (XEN) 1 CPUs available, 2 CPUs total
> *** CALLED SAL_SET_VECTORS. IGNORED...
> (XEN) Built 1 zonelists
> Kernel command line: nomca console=ttyS1,115200 console=tty0
> root=LABEL=/1234 ro
> PID hash table entries: 2048 (order: 11, 65536 bytes)
> xen_pal_emulator: index=14
> (XEN) vcpu_enable_timer(1000000): interval set to 649 cycles
> (XEN) Console: colour VGA+ 80x25
> Linux version 2.6.12.6-xen0 (xen@xxxxxxxxxxxxxxxxxxx) (version gcc
> 3.4.3 20050227 (Red Hat 3.4.3-22.1)) #1 SMP Tue Dec5
> EFI v1.00 by Xen/ia64: SALsystab=0x8000178 MPS=0x3ff97000 ACPI
> 2.0=0x3ff98000 ACPI=0x3ff99000 SMBIOS=0xf0000
> warning: unable to switch EFI into virtual mode
> (status=9223372036854775811) Initial ramdisk at: 0xe000000027ac0000
> (1303797 bytes)
> SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
> No logical to physical processor mapping available
> cpu_init: PAL VM summary failed, assuming 18 RID bits
> iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
> ACPI: Local APIC address c0000000fee00000
> PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000) vector
> 30 register_intr: changing vector 39 from IO-SAPIC-edge to
> IO-SAPIC-level 1 CPUs available, 2 CPUs total
> Built 1 zonelists
> Kernel command line: nomca console=ttyS1,115200 console=tty0
> root=LABEL=/1234 ro
> PID hash table entries: 2048 (order: 11, 65536 bytes)
> Console: colour VGA+ 80x25
> Running on Xen! start_info_pfn=0x1ff8 lags=0x3
> xen-event-channel using irq 233
> Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
> Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)
> Delivering first extint to domain: isr=0000000000000000,
> iip=a00000010094b860
> Memory: 504256k/523264k available (8152k code, 18400k reserved, 3542k
> data, 272k init)
> McKinley Errata 9 workaround not needed; disabling it
> Mount-cache hash table entries: 1024
> (XEN) vcpu_get_lid: WARNING: Getting cr.lid always returns zero
> Boot processor id 0x0/0x0
> Brought up 1 CPUs
> Total of 1 processors activated (2085.64 BogoMIPS).
> checking if image is initramfs... it is
> Freeing initrd memory: 1264kB freed
> NET: Registered protocol family 16
> ACPI: Subsystem revision 20050309
> ACPI: Interpreter enabled
> ACPI: Using IOSAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> Ignoring range [0-cfff] (100)
> ACPI: PCI Root Bridge [PCI1] (0000:02)
> ACPI: PCI Root Bridge [PCI2] (0000:05)
> ACPI: Device [CSFF] status [00000008]: functional but not present;
> setting present
> ACPI: PCI Root Bridge [CSFF] (0000:ff)
> SCSI subsystem initialized
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
> a report
> perfmon: version 2.0 IRQ 238
> perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47
> bits)
> PAL Information Facility v0.5
> perfmon: added sampling format default_format
> perfmon_default_smpl: default_format v2.0 registered
> Total HugeTLB memory allocated, 0
> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> Initializing Cryptographic API
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
> ACPI: Power Button (FF) [PWRF]
> EFI Time Services Driver v0.4
> Linux agpgart interface v0.101 (c) Dave Jones
> [drm] Initialized drm 1.0.0 20040925
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
> enabled acpi_serial_port: zero-length IO port range?
> ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
> acpi_serial_port: zero-length IO port range?
> ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
> Linux version 2.6.12.6-xen0 (xen@xxxxxxxxxxxxxxxxxxx) (version gcc
> 3.4.3 20050227 (Red Hat 3.4.3-22.1)) #1 SMP Tue Dec5
> Linux version 2.6.12.6-xen0 (xen@xxxxxxxxxxxxxxxxxxx) (version gcc
> 3.4.3 20050227 (Red Hat 3.4.3-22.1)) #1 SMP Tue Dec5
> EFI v1.00 by Xen/ia64: SALsystab=0x8000178 MPS=0x3ff97000 ACPI
> 2.0=0x3ff98000 ACPI=0x3ff99000 SMBIOS=0xf0000
> EFI v1.00 by Xen/ia64: SALsystab=0x8000178 MPS=0x3ff97000 ACPI
> 2.0=0x3ff98000 ACPI=0x3ff99000 SMBIOS=0xf0000
> warning: unable to switch EFI into virtual mode
> (status=9223372036854775811) warning: unable to switch EFI into
> virtual mode (status=9223372036854775811) Initial ramdisk at:
> 0xe000000027ac0000 (1303797 bytes)
> Initial ramdisk at: 0xe000000027ac0000 (1303797 bytes)
> SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
> SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
> No logical to physical processor mapping available
> No logical to physical processor mapping available
> cpu_init: PAL VM summary failed, assuming 18 RID bits
> cpu_init: PAL VM summary failed, assuming 18 RID bits
> iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
> iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
> ACPI: Local APIC address c0000000fee00000
> ACPI: Local APIC address c0000000fee00000
> PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000) vector
> 30 PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000)
> vector 30 register_intr: changing vector 39 from IO-SAPIC-edge to
> IO-SAPIC-level register_intr: changing vector 39 from IO-SAPIC-edge
> to IO-SAPIC-level 1 CPUs available, 2 CPUs total
> 1 CPUs available, 2 CPUs total
> Built 1 zonelists
> Built 1 zonelists
> Kernel command line: nomca console=ttyS1,115200 console=tty0
> root=LABEL=/1234 ro
> Kernel command line: nomca console=ttyS1,115200 console=tty0
> root=LABEL=/1234 ro
> PID hash table entries: 2048 (order: 11, 65536 bytes)
> PID hash table entries: 2048 (order: 11, 65536 bytes)
> Console: colour VGA+ 80x25
> Console: colour VGA+ 80x25
> Running on Xen! start_info_pfn=0x1ff8 lags=0x3
> Running on Xen! start_info_pfn=0x1ff8 lags=0x3
> xen-event-channel using irq 233
> xen-event-channel using irq 233
> Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
> Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
> Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)
> Memory: 504256k/523264k available (8152k code, 18400k reserved, 3542k
> data, 272k init)
> Memory: 504256k/523264k available (8152k code, 18400k reserved, 3542k
> data, 272k init)
> McKinley Errata 9 workaround not needed; disabling it
> McKinley Errata 9 workaround not needed; disabling it
> Mount-cache hash table entries: 1024
> Mount-cache hash table entries: 1024
> Boot processor id 0x0/0x0
> Boot processor id 0x0/0x0
> Brought up 1 CPUs
> Brought up 1 CPUs
> Total of 1 processors activated (2085.64 BogoMIPS).
> Total of 1 processors activated (2085.64 BogoMIPS).
> checking if image is initramfs... it is
> checking if image is initramfs... it is
> Freeing initrd memory: 1264kB freed
> Freeing initrd memory: 1264kB freed
> NET: Registered protocol family 16
> NET: Registered protocol family 16
> ACPI: Subsystem revision 20050309
> ACPI: Subsystem revision 20050309
> ACPI: Interpreter enabled
> ACPI: Interpreter enabled
> ACPI: Using IOSAPIC for interrupt routing
> ACPI: Using IOSAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> Ignoring range [0-cfff] (100)
> Ignoring range [0-cfff] (100)
> ACPI: PCI Root Bridge [PCI1] (0000:02)
> ACPI: PCI Root Bridge [PCI1] (0000:02)
> ACPI: PCI Root Bridge [PCI2] (0000:05)
> ACPI: PCI Root Bridge [PCI2] (0000:05)
> ACPI: Device [CSFF] status [00000008]: functional but not present;
> setting present
> ACPI: Device [CSFF] status [00000008]: functional but not present;
> setting present
> ACPI: PCI Root Bridge [CSFF] (0000:ff)
> ACPI: PCI Root Bridge [CSFF] (0000:ff)
> SCSI subsystem initialized
> SCSI subsystem initialized
> usbcore: registered new driver hub
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
> a report
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
> a report
> perfmon: version 2.0 IRQ 238
> perfmon: version 2.0 IRQ 238
> perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47
> bits) perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters
> (47 bits)
> PAL Information Facility v0.5
> PAL Information Facility v0.5
> perfmon: added sampling format default_format
> perfmon: added sampling format default_format
> perfmon_default_smpl: default_format v2.0 registered
> perfmon_default_smpl: default_format v2.0 registered
> Total HugeTLB memory allocated, 0
> Total HugeTLB memory allocated, 0
> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> Initializing Cryptographic API
> Initializing Cryptographic API
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
> ACPI: Power Button (FF) [PWRF]
> ACPI: Power Button (FF) [PWRF]
> EFI Time Services Driver v0.4
> EFI Time Services Driver v0.4
> Linux agpgart interface v0.101 (c) Dave Jones
> Linux agpgart interface v0.101 (c) Dave Jones
> [drm] Initialized drm 1.0.0 20040925
> [drm] Initialized drm 1.0.0 20040925
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
> enabled Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ
> sharing enabled acpi_serial_port: zero-length IO port range?
> acpi_serial_port: zero-length IO port range?
> ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
> ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
> acpi_serial_port: zero-length IO port range?
> acpi_serial_port: zero-length IO port range?
> ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
> io scheduler noop registeredio scheduler noop registered
>
> io scheduler anticipatory registeredio scheduler anticipatory
> registered
>
> io scheduler deadline registeredio scheduler deadline registered
>
> io scheduler cfq registeredio scheduler cfq registered
>
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 8 devices)
> loop: loaded (max 8 devices)
> Intel(R) PRO/1000 Network Driver - version 6.0.54-k2
> Intel(R) PRO/1000 Network Driver - version 6.0.54-k2
> Copyright (c) 1999-2004 Intel Corporation.
> Copyright (c) 1999-2004 Intel Corporation.
> GSI 24 (level, low) -> CPU 0 (0x0000) vector 48
> GSI 24 (level, low) -> CPU 0 (0x0000) vector 48
> ACPI: PCI Interrupt 0000:04:01.0[A] -> ACPI: PCI Interrupt
> 0000:04:01.0[A] -> GSI 24 (level, low) -> IRQ 48
> GSI 24 (level, low) -> IRQ 48
> e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> GSI 25 (level, low) -> CPU 0 (0x0000) vector 49
> GSI 25 (level, low) -> CPU 0 (0x0000) vector 49
> ACPI: PCI Interrupt 0000:04:01.1[B] -> ACPI: PCI Interrupt
> 0000:04:01.1[B] -> GSI 25 (level, low) -> IRQ 49
> GSI 25 (level, low) -> IRQ 49
> e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
> e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
> e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
> e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
> e100: Copyright(c) 1999-2005 Intel Corporation
> e100: Copyright(c) 1999-2005 Intel Corporation
> Linux video capture interface: v1.00
> Linux video capture interface: v1.00
> grant table at e000000007ff4000
> grant table at e000000007ff4000
> Grant table initialized
> Grant table initialized
> WARNING: Failed to register Xen virtual console driver as 'ttyS0'
> WARNING: Failed to register Xen virtual console driver as 'ttyS0'
> Event-channel device installed.
> Event-channel device installed.
> Allocated mmap_vstart: 0xa000000200000000
> Allocated mmap_vstart: 0xa000000200000000
> st: Version 20050312, fixed bufsize 32768, s/g segs 256
> st: Version 20050312, fixed bufsize 32768, s/g segs 256
> osst :I: Tape driver with OnStream support version 0.99.3
> osst :I: Tape driver with OnStream support version 0.99.3
> osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
> osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
> Fusion MPT base driver 3.01.20
> Fusion MPT base driver 3.01.20
> Copyright (c) 1999-2004 LSI Logic Corporation
> Copyright (c) 1999-2004 LSI Logic Corporation
> GSI 48 (level, low) -> CPU 0 (0x0000) vector 50
> GSI 48 (level, low) -> CPU 0 (0x0000) vector 50
> ACPI: PCI Interrupt 0000:03:01.0[A] -> ACPI: PCI Interrupt
> 0000:03:01.0[A] -> GSI 48 (level, low) -> IRQ 50
> GSI 48 (level, low) -> IRQ 50
> mptbase: Initiating ioc0 bringup
> mptbase: Initiating ioc0 bringup
> ioc0: ioc0: 53C1030: 53C1030:
> Capabilities={Capabilities={InitiatorInitiator}
> }
> Unable to handle kernel NULL pointer dereference (address
> 0000000000000020) Unable to handle kernel NULL pointer dereference
> (address 0000000000000020) swapper[1]: Oops 8813272891392 [1]
> swapper[1]: Oops 8813272891392 [1]
> Modules linked in:Modules linked in:
>
>
>
> Pid: 1, CPU 0, comm: swapper
> Pid: 1, CPU 0, comm: swapper
> psr : 0000001008026010 ifs : 8000000000000710 ip :
> [<a0000001006dbbb0>] Not tainted
> psr : 0000001008026010 ifs : 8000000000000710 ip :
> [<a0000001006dbbb0>] Not tainted
> ip is at sba_unmap_single+0x70/0x860
> ip is at sba_unmap_single+0x70/0x860
> unat: 0000000000000000 pfs : 800000000000038b rsc : 000000000000000b
> unat: 0000000000000000 pfs : 800000000000038b rsc : 000000000000000b
> rnat: 0000000000000000 bsps: 0000000000000000 pr : 85a96814096a5695
> rnat: 0000000000000000 bsps: 0000000000000000 pr : 85a96814096a5695
> ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f
> ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f
> csd : 0000000000000000 ssd : 0000000000000000
> csd : 0000000000000000 ssd : 0000000000000000
> b0 : a0000001006dc620 b6 : a0000001004fed80 b7 : a000000100069d90
> b0 : a0000001006dc620 b6 : a0000001004fed80 b7 : a000000100069d90
> f6 : 1003e0000000000000000 f7 : 1003e8080808080808081
> f6 : 1003e0000000000000000 f7 : 1003e8080808080808081
> f8 : 1003e0000000000000000 f9 : 1003e0000000000000000
> f8 : 1003e0000000000000000 f9 : 1003e0000000000000000
> f10 : 1003e0000000000000000 f11 : 1003e44b831eee7285baf
> f10 : 1003e0000000000000000 f11 : 1003e44b831eee7285baf
> r1 : a000000100d50b90 r2 : 0000000000000020 r3 : a000000100ac8300
> r1 : a000000100d50b90 r2 : 0000000000000020 r3 : a000000100ac8300
> r8 : a000000100ac8300 r9 : a000000100b51c90 r10 : e000000027c7f120
> r8 : a000000100ac8300 r9 : a000000100b51c90 r10 : e000000027c7f120
> r11 : e000000027e4c008 r12 : e0000000085ffac0 r13 : e0000000085f8000
> r11 : e000000027e4c008 r12 : e0000000085ffac0 r13 : e0000000085f8000
> r14 : e0000000087f1d08 r15 : 000000000000007f r16 : 0000000000ff0000
> r14 : e0000000087f1d08 r15 : 000000000000007f r16 : 0000000000ff0000
> r17 : e000000027ebb978 r18 : e000000027e4c004 r19 : e000000027ebb97a
> r17 : e000000027ebb978 r18 : e000000027e4c004 r19 : e000000027ebb97a
> r20 : 0000000000000001 r21 : 00000000a07f0807 r22 : 0000000000000000
> r20 : 0000000000000001 r21 : 00000000a07f0807 r22 : 0000000000000000
> r23 : 0000000000000000 r24 : 0000000000000000 r25 : 0000000000000000
> r23 : 0000000000000000 r24 : 0000000000000000 r25 : 0000000000000000
> r26 : 0000000000000000 r27 : 0000000000004000 r28 : e000000008210000
> r26 : 0000000000000000 r27 : 0000000000004000 r28 : e000000008210000
> r29 : 0000000000000000 r30 : 0000000000000000 r31 : a000000100b01090
> r29 : 0000000000000000 r30 : 0000000000000000 r31 : a000000100b01090
>
>
> Call Trace:
> Call Trace:
> [<a000000100018200>] show_stack+0x80/0xa0
> [<a000000100018200>] show_stack+0x80/0xa0
> sp=e0000000085ff670
> bsp=e0000000085f9248
> sp=e0000000085ff670 bsp=e0000000085f9248 [<a000000100018b10>]
> show_regs+0x890/0x8c0 [<a000000100018b10>] show_regs+0x890/0x8c0
> sp=e0000000085ff840
> bsp=e0000000085f9200
> sp=e0000000085ff840 bsp=e0000000085f9200 [<a000000100040530>]
> die+0x150/0x200 [<a000000100040530>] die+0x150/0x200
> sp=e0000000085ff860
> bsp=e0000000085f91b8
> sp=e0000000085ff860 bsp=e0000000085f91b8 [<a000000100065d10>]
> ia64_do_page_fault+0x9d0/0xba0 [<a000000100065d10>]
> ia64_do_page_fault+0x9d0/0xba0
> sp=e0000000085ff860
> bsp=e0000000085f9150 sp=e0000000085ff860 bsp=e0000000085f9150
> [<a00000010006a140>] xen_leave_kernel+0x0/0x360 [<a00000010006a140>]
> xen_leave_kernel+0x0/0x360
> sp=e0000000085ff8f0
> bsp=e0000000085f9150 sp=e0000000085ff8f0 bsp=e0000000085f9150
> [<a0000001006dbbb0>] sba_unmap_single+0x70/0x860
> [<a0000001006dbbb0>]
> sba_unmap_single+0x70/0x860
> sp=e0000000085ffac0 bsp=e0000000085f90d0 sp=e0000000085ffac0
> bsp=e0000000085f90d0 [<a0000001006dc620>]
> sba_free_coherent+0x40/0xc0
> [<a0000001006dc620>]
> sba_free_coherent+0x40/0xc0 sp=e0000000085ffac0 bsp=e0000000085f9098
> sp=e0000000085ffac0 bsp=e0000000085f9098 [<a000000100599740>]
> mpt_do_ioc_recovery+0xfe0/0x2180
> [<a000000100599740>]
> mpt_do_ioc_recovery+0xfe0/0x2180 sp=e0000000085ffac0
> bsp=e0000000085f8f98 sp=e0000000085ffac0 bsp=e0000000085f8f98
> [<a00000010059b190>]
> mptbase_probe+0x5d0/0x1160
> [<a00000010059b190>] mptbase_probe+0x5d0/0x1160 sp=e0000000085ffe20
> bsp=e0000000085f8f28 sp=e0000000085ffe20 bsp=e0000000085f8f28
> [<a000000100304dd0>]
> pci_device_probe+0x150/0x480
> [<a000000100304dd0>] pci_device_probe+0x150/0x480
> sp=e0000000085ffe30 bsp=e0000000085f8ee0 sp=e0000000085ffe30
> bsp=e0000000085f8ee0
> [<a00000010044be70>]
> driver_probe_device+0xb0/0x180 [<a00000010044be70>]
> driver_probe_device+0xb0/0x180 sp=e0000000085ffe30
> bsp=e0000000085f8eb0
> sp=e0000000085ffe30
> bsp=e0000000085f8eb0 [<a00000010044c200>] driver_attach+0x120/0x1a0
> [<a00000010044c200>] driver_attach+0x120/0x1a0 sp=e0000000085ffe30
> bsp=e0000000085f8e80
> sp=e0000000085ffe30
> bsp=e0000000085f8e80 [<a00000010044caf0>] bus_add_driver+0x150/0x360
> [<a00000010044caf0>] bus_add_driver+0x150/0x360 sp=e0000000085ffe30
> bsp=e0000000085f8e40
> sp=e0000000085ffe30
> bsp=e0000000085f8e40 [<a00000010044d830>] driver_register+0x70/0xa0
> [<a00000010044d830>] driver_register+0x70/0xa0 sp=e0000000085ffe30
> bsp=e0000000085f8e20
> sp=e0000000085ffe30
> bsp=e0000000085f8e20 [<a000000100304580>]
> pci_register_driver+0x100/0x160 [<a000000100304580>]
> pci_register_driver+0x100/0x160
> sp=e0000000085ffe30
> bsp=e0000000085f8df0 sp=e0000000085ffe30 bsp=e0000000085f8df0
> [<a000000100965170>] fusion_init+0x270/0x2a0 [<a000000100965170>]
> fusion_init+0x270/0x2a0
> sp=e0000000085ffe30
> bsp=e0000000085f8dc8 sp=e0000000085ffe30 bsp=e0000000085f8dc8
> [<a000000100011200>] init+0x360/0x940 [<a000000100011200>]
> init+0x360/0x940 sp=e0000000085ffe30
> bsp=e0000000085f8d68
> sp=e0000000085ffe30 bsp=e0000000085f8d68 [<a00000010001a490>]
> kernel_thread_helper+0x30/0x60 [<a00000010001a490>]
> kernel_thread_helper+0x30/0x60
> sp=e0000000085ffe30
> bsp=e0000000085f8d40 sp=e0000000085ffe30 bsp=e0000000085f8d40
> [<a000000100010d40>] start_kernel_thread+0x20/0x40
> [<a000000100010d40>] start_kernel_thread+0x20/0x40
> sp=e0000000085ffe30 bsp=e0000000085f8d40 sp=e0000000085ffe30
> bsp=e0000000085f8d40 <0>Kernel panic - not syncing: Attempted to kill
> init! <0>Kernel panic - not syncing: Attempted to kill init!
>
>
>
> _______________________________________________
> Xen-ia64-devel mailing list
> Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-ia64-devel
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
Home