>
> Excellent. Everything that is new.
Shiney. :)
>
>>
>> When I boot without Xen the DVB PCI cards can tune and scan perfectly.
>> I also have a USB DVB unit, which can tune and scan regardless of
>> whether Xen is running. However when I try to scan and tune with the
>> PCI DVB cards it fails.
>
> OK, and you are _not_ passing it to a guest right?
Indeed not, this is in dom0. I do not have IOMMU so my dvb stuff will
run in dom0.
>>
>> [ 26.572693] cx88[1]/1: IRQ loop detected, disabling interrupts
>> [ 26.574810] cx88[1]: irq aud [0x1001] dn_risci1* dn_sync*
>
> Great. Can you do a couple of tests:
Certainly. However, first I will say that I have made the above
messages go away. I had been trying various boot options based on what
I had been reading on net. I was using irqpoll at the time that those
messages appeared. Removing irqpoll has stopped them from occurring.
Hopefully that is useful information in itself.
>
> 1). Boot your Linux machine with 'mem=3G' and see if that makes the issue
> disappear.
I have tried mem=2G and 4G (not 3 but I will if you think it'll be different).
I have also been trying with ballooning disabled, and with dom0_mem=2G / 4G
I also tried swiotlb=65762
I have tried most combinations of the above - but not necessarily all.
>
> 2). Tell me what is the 'scan' tool you use? Is it there a command
> line version of the tool that triggers this?
>
I've been using as many as I can try.
Mainly it's the F16 provided scandvb, which I think is just a renamed
dvbscan and also w_scan.
I've also tried mplayer, xine, kaffeine, and mythtv. I haven't got vlc
to compile yet...
I think I have a bit more information for you after today's hacking about.
First off there was a kernel update, so I'm now at
Linux mythtvtuner.home 3.1.1-1.fc16.x86_64 #1 SMP Fri Nov 11 21:47:56
UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
>From what I can see I think in fact the tuning works OK, but there is
some sort of issue getting at the streams once tuned.
e.g. tzap will get a lock OK
> tzap -a 1 -f 1 -d 1 -c ~/tzap.channels.conf "BBC ONE(BBC)"
using '/dev/dvb/adapter1/frontend1' and '/dev/dvb/adapter1/demux1'
tuning to 650000000 Hz
video pid 0x0065, audio pid 0x0066
status 01 | signal 5151 | snr 8000 | ber 00003fff | unc 00000000 |
status 1f | signal 4e4e | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal 4e4e | snr ffff | ber 00000000 | unc 00000000 | FE_HAS_LOCK
I don't know if the following is useful?
root@mythtvtuner jon]# strace -f -v scandvb -a 1 -f1 -d 0 -5 -v -v -v
~jon/dvbscan.channels.conf
execve("/usr/bin/scandvb", ["scandvb", "-a", "1", "-f1", "-d", "0",
"-5", "-v", "-v", "-v", "/home/jon/dvbscan.channels.conf"],
["XDG_SESSION_ID=69", "HOSTNAME=mythtvtuner.home", "SHELL=/bin/bash",
"TERM=xterm", "HISTSIZE=1000", "SSH_CLIENT=192.168.2.179 48391 2"...,
"SSH_TTY=/dev/pts/7", "USER=jon",
"LS_COLORS=rs=0:di=01;34:ln=01;36"...,
"PATH=/usr/lib64/ccache:/usr/loca"..., "MAIL=/var/spool/mail/jon",
"PWD=/home/jon", "XMODIFIERS=@im=none", "LANG=en_US.UTF-8",
"KDE_IS_PRELINKED=1", "KDEDIRS=/usr", "HISTCONTROL=ignoredups",
"HOME=/root", "SHLVL=2", "LOGNAME=jon", "CVS_RSH=ssh",
"SSH_CONNECTION=192.168.2.179 483"...,
"LESSOPEN=||/usr/bin/lesspipe.sh "...,
"XDG_RUNTIME_DIR=/run/user/jon", "_=/usr/bin/strace"]) = 0
brk(0) = 0x20fe000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x7ff5ccd7a000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_dev=makedev(253, 1), st_ino=132752, st_mode=S_IFREG|0644,
st_nlink=1, st_uid=0, st_gid=0, st_blksize=4096, st_blocks=224,
st_size=112482, st_atime=2011/11/14-12:23:08,
st_mtime=2011/11/14-12:23:06, st_ctime=2011/11/14-12:23:06}) = 0
mmap(NULL, 112482, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7ff5ccd5e000
close(3) = 0
open("/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260\27\2\2008\0\0\0"...,
832) = 832
fstat(3, {st_dev=makedev(253, 1), st_ino=157705, st_mode=S_IFREG|0755,
st_nlink=1, st_uid=0, st_gid=0, st_blksize=4096, st_blocks=4032,
st_size=2063512, st_atime=2011/11/14-23:30:01,
st_mtime=2011/10/26-20:57:26, st_ctime=2011/11/09-23:29:49}) = 0
mmap(0x3880000000, 3884344, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x3880000000
mprotect(0x38801aa000, 2097152, PROT_NONE) = 0
mmap(0x38803aa000, 24576, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1aa000) = 0x38803aa000
mmap(0x38803b0000, 17720, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x38803b0000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x7ff5ccd5d000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x7ff5ccd5c000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x7ff5ccd5b000
arch_prctl(ARCH_SET_FS, 0x7ff5ccd5c700) = 0
mprotect(0x38803aa000, 16384, PROT_READ) = 0
mprotect(0x387fe21000, 4096, PROT_READ) = 0
munmap(0x7ff5ccd5e000, 112482) = 0
write(2, "scanning /home/jon/dvbscan.chann"..., 41scanning
/home/jon/dvbscan.channels.conf
) = 41
write(2, "using '/dev/dvb/adapter1/fronten"..., 67using
'/dev/dvb/adapter1/frontend1' and '/dev/dvb/adapter1/demux0'
) = 67
open("/dev/dvb/adapter1/frontend1", O_RDWR) = 3
ioctl(3, FE_GET_INFO, 0x60a640) = 0
rt_sigaction(SIGINT, {0x403300, [INT], SA_RESTORER|SA_RESTART,
0x3880036320}, {SIG_DFL, [], 0}, 8) = 0
brk(0) = 0x20fe000
brk(0x211f000) = 0x211f000
brk(0) = 0x211f000
open("/home/jon/dvbscan.channels.conf", O_RDONLY) = 4
fstat(4, {st_dev=makedev(253, 16), st_ino=1704027,
st_mode=S_IFREG|0664, st_nlink=1, st_uid=1000, st_gid=1000,
st_blksize=4096, st_blocks=8, st_size=1028,
st_atime=2011/11/14-15:05:46, st_mtime=2011/11/10-23:05:38,
st_ctime=2011/11/10-23:05:38}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x7ff5ccd79000
read(4, "#-------------------------------"..., 4096) = 1028
write(2, "initial transponder 650000000 0 "..., 44initial transponder
650000000 0 9 9 6 2 4 4
) = 44
write(2, "initial transponder 754000000 0 "..., 44initial transponder
754000000 0 3 9 3 1 0 0
) = 44
write(2, "initial transponder 794000000 0 "..., 44initial transponder
794000000 0 2 9 3 1 0 0
) = 44
write(2, "initial transponder 738000000 0 "..., 44initial transponder
738000000 0 2 9 3 1 0 0
) = 44
write(2, "initial transponder 690000000 0 "..., 44initial transponder
690000000 0 2 9 3 1 0 0
) = 44
write(2, "initial transponder 722000000 0 "..., 44initial transponder
722000000 0 2 9 3 1 0 0
) = 44
write(2, "initial transponder 706000000 0 "..., 44initial transponder
706000000 0 9 9 6 2 4 4
) = 44
write(2, "initial transponder 842000000 0 "..., 44initial transponder
842000000 0 9 9 6 2 4 4
) = 44
read(4, "", 4096) = 0
close(4) = 0
munmap(0x7ff5ccd79000, 4096) = 0
write(2, ">>> tune to: ", 13>>> tune to: ) = 13
write(2, "650000000:", 10650000000:) = 10
write(2, "INVERSION_AUTO:", 15INVERSION_AUTO:) = 15
write(2, "BANDWIDTH_8_MHZ:", 16BANDWIDTH_8_MHZ:) = 16
write(2, "FEC_AUTO:", 9FEC_AUTO:) = 9
write(2, "FEC_AUTO:", 9FEC_AUTO:) = 9
write(2, "QAM_AUTO:", 9QAM_AUTO:) = 9
write(2, "TRANSMISSION_MODE_AUTO:", 23TRANSMISSION_MODE_AUTO:) = 23
write(2, "GUARD_INTERVAL_AUTO:", 20GUARD_INTERVAL_AUTO:) = 20
write(2, "HIERARCHY_AUTO", 14HIERARCHY_AUTO) = 14
write(2, "\n", 1
) = 1
ioctl(3, FE_SET_FRONTEND, 0x7fffe82681c0) = 0
nanosleep({0, 200000000}, NULL) = 0
ioctl(3, FE_READ_STATUS, 0x7fffe82681ec) = 0
write(2, ">>> tuning status == 0x01\n", 26>>> tuning status == 0x01
) = 26
nanosleep({0, 200000000}, NULL) = 0
ioctl(3, FE_READ_STATUS, 0x7fffe82681ec) = 0
write(2, ">>> tuning status == 0x1f\n", 26>>> tuning status == 0x1f
) = 26
open("/dev/dvb/adapter1/demux0", O_RDWR|O_NONBLOCK) = 4
ioctl(4, DMX_SET_FILTER, 0x7fffe8266fc0) = 0
open("/dev/dvb/adapter1/demux0", O_RDWR|O_NONBLOCK) = 5
ioctl(5, DMX_SET_FILTER, 0x7fffe8266fc0) = 0
open("/dev/dvb/adapter1/demux0", O_RDWR|O_NONBLOCK) = 6
ioctl(6, DMX_SET_FILTER, 0x7fffe8266fc0) = 0
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}, {fd=5, events=POLLIN}, {fd=4,
events=POLLIN}], 3, 1000) = 0 (Timeout)
write(2, "WARNING: filter timeout pid 0x00"..., 35WARNING: filter
timeout pid 0x0011
) = 35
ioctl(5, DMX_STOP, 0x38803b0a80) = 0
close(5) = 0
poll([{fd=6, events=POLLIN}, {fd=4, events=POLLIN}], 2, 1000) = 0 (Timeout)
write(2, "WARNING: filter timeout pid 0x00"..., 35WARNING: filter
timeout pid 0x0000
) = 35
ioctl(4, DMX_STOP, 0x38803b0a80) = 0
close(4) = 0
poll([{fd=6, events=POLLIN}], 1, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}], 1, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}], 1, 1000) = 0 (Timeout)
poll([{fd=6, events=POLLIN}], 1, 1000^C <unfinished ...>
etc...
Occasionally the POLLIN doesn't timeout (since kernel upgrade), but
the data can't seem to be interpreted (my guess) and I can't find what
makes this occur (and I can't seem to make it happen right now
annoyingly!).
I don't want to bombard you with unwanted diags but can capture more
fully similar to above if useful?
> 3). Or does this happend when you just load the module and it starts
> doing the IRQ loop detected' thingy?
Not entirely sure, can recreate by turning irqpoll back on and testing
if you want? From memory there were very few of the
>> [ 26.572693] cx88[1]/1: IRQ loop detected, disabling interrupts
but lots and lots of:
>> [ 26.574810] cx88[1]: irq aud [0x1001] dn_risci1* dn_sync*
Thanks very much for looking into this.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home