Forcibly enabling the MMCFG space on AMD Fam10 CPUs cannot be expected
to work since with the firmware not being aware of the address range
used it cannot possibly reserve the space in E820 or ACPI resources.
Hence we need to manually insert the range into the E820 table, and
enable the range only when the insertion actually works without
conflict.
Further, the actual enabling of the space is done from identify_cpu(),
which means that acpi_mmcfg_init() muts be called after that function
(and hance should not be called from acpi_boot_init()). Otherwise,
Dom0 would be able to use MMCFG, but Xen wouldn't.
Signed-off-by: Jan Beulich <jbeulich@xxxxxxxxxx>
--- a/xen/arch/x86/acpi/boot.c
+++ b/xen/arch/x86/acpi/boot.c
@@ -832,8 +832,6 @@ int __init acpi_boot_init(void)
acpi_dmar_init();
- acpi_mmcfg_init();
-
erst_init();
return 0;
--- a/xen/arch/x86/e820.c
+++ b/xen/arch/x86/e820.c
@@ -563,6 +563,55 @@ static void __init machine_specific_memo
clip_to_limit(top_of_ram, "MTRRs do not cover all of memory.");
}
+/* This function relies on the passed in e820->map[] being sorted. */
+int __init e820_add_range(
+ struct e820map *e820, uint64_t s, uint64_t e, uint32_t type)
+{
+ unsigned int i;
+
+ for ( i = 0; i < e820->nr_map; ++i )
+ {
+ uint64_t rs = e820->map[i].addr;
+ uint64_t re = rs + e820->map[i].size;
+
+ if ( rs == e && e820->map[i].type == type )
+ {
+ e820->map[i].addr = s;
+ return 1;
+ }
+
+ if ( re == s && e820->map[i].type == type &&
+ (i + 1 == e820->nr_map || e820->map[i + 1].addr >= e) )
+ {
+ e820->map[i].size += e - s;
+ return 1;
+ }
+
+ if ( rs >= e )
+ break;
+
+ if ( re > s )
+ return 0;
+ }
+
+ if ( e820->nr_map >= ARRAY_SIZE(e820->map) )
+ {
+ printk(XENLOG_WARNING "E820: overflow while adding region"
+ " %"PRIx64"-%"PRIx64"\n", s, e);
+ return 0;
+ }
+
+ memmove(e820->map + i + 1, e820->map + i,
+ (e820->nr_map - i) * sizeof(*e820->map));
+
+ e820->nr_map++;
+ e820->map[i].addr = s;
+ e820->map[i].size = e - s;
+ e820->map[i].type = type;
+
+ return 1;
+}
+
int __init e820_change_range_type(
struct e820map *e820, uint64_t s, uint64_t e,
uint32_t orig_type, uint32_t new_type)
--- a/xen/arch/x86/setup.c
+++ b/xen/arch/x86/setup.c
@@ -1248,6 +1248,8 @@ void __init __start_xen(unsigned long mb
#ifdef CONFIG_X86_64
vesa_mtrr_init();
+
+ acpi_mmcfg_init();
#endif
if ( opt_nosmp )
--- a/xen/arch/x86/x86_32/pci.c
+++ b/xen/arch/x86/x86_32/pci.c
@@ -60,8 +60,3 @@ int pci_find_ext_capability(int seg, int
{
return 0;
}
-
-void acpi_mmcfg_init(void)
-{
- return;
-}
--- a/xen/arch/x86/x86_64/mmconf-fam10h.c
+++ b/xen/arch/x86/x86_64/mmconf-fam10h.c
@@ -9,6 +9,7 @@
#include <xen/init.h>
#include <xen/dmi.h>
#include <asm/amd.h>
+#include <asm/e820.h>
#include <asm/msr.h>
#include <asm/processor.h>
@@ -131,7 +132,8 @@ static void __init get_fam10h_pci_mmconf
return;
out:
- fam10h_pci_mmconf_base = start;
+ if (e820_add_range(&e820, start, start + SIZE, E820_RESERVED))
+ fam10h_pci_mmconf_base = start;
}
void __cpuinit fam10h_check_enable_mmcfg(void)
--- a/xen/include/asm-x86/e820.h
+++ b/xen/include/asm-x86/e820.h
@@ -28,6 +28,8 @@ extern int reserve_e820_ram(struct e820m
extern int e820_change_range_type(
struct e820map *e820, uint64_t s, uint64_t e,
uint32_t orig_type, uint32_t new_type);
+extern int e820_add_range(
+ struct e820map *, uint64_t s, uint64_t e, uint32_t type);
extern unsigned long init_e820(const char *, struct e820entry *, int *);
extern struct e820map e820;
x86_64-mmcfg-fam10.patch
Description: Text document
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home