# HG changeset patch
# User Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
# Date 1310493175 14400
# Node ID 841e8a1304e707bb9f077d014fb59d46133fbeae
# Parent ded47a2ba411fefc614c773ae78518a162f912f9
xen: Update pci_uart_config to save the BAR1 contents if com2 is used
Jan Beulich pointed out that the pci_uart_config can be called for
com2 and we should probe the second BAR instead of the first one.
This patch will probe the BAR0 if it is com1, and BAR1 if its com2.
It also cleans up some of the whitespace problems and changes the
name of the parameter and function from 'magic' to 'pci'.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
diff -r ded47a2ba411 -r 841e8a1304e7 xen/drivers/char/ns16550.c
--- a/xen/drivers/char/ns16550.c Tue Jul 12 13:06:05 2011 -0400
+++ b/xen/drivers/char/ns16550.c Tue Jul 12 13:52:55 2011 -0400
@@ -49,7 +49,7 @@ static struct ns16550 {
unsigned int ps_bdf[3]; /* pci serial port BDF */
bool_t pb_bdf_enable; /* if =1, pb-bdf effective, port behind bridge */
bool_t ps_bdf_enable; /* if =1, ps_bdf effective, port on pci card */
- int bar0, cr;
+ int bar, cr, bar_idx;
} ns16550_com[2] = { { 0 } };
/* Register offsets */
@@ -338,9 +338,10 @@ static void ns16550_resume(struct serial
ns16550_setup_preirq(port->uart);
ns16550_setup_postirq(port->uart);
- if (uart->bar0) {
+ if (uart->bar) {
pci_conf_write32(uart->pb_bdf[0], uart->pb_bdf[1], uart->pb_bdf[2],
- PCI_BASE_ADDRESS_0, uart->bar0);
+ PCI_BASE_ADDRESS_0 + sizeof(uint32_t) * uart->bar_idx,
+ uart->bar);
pci_conf_write32(uart->pb_bdf[0], uart->pb_bdf[1], uart->pb_bdf[2],
PCI_COMMAND, uart->cr);
}
@@ -368,9 +369,10 @@ static void ns16550_suspend(struct seria
struct ns16550 *uart = port->uart;
stop_timer(&uart->timer);
- if (uart->bar0) {
- uart->bar0 = pci_conf_read32(uart->pb_bdf[0], uart->pb_bdf[1],
uart->pb_bdf[2],
- PCI_BASE_ADDRESS_0);
+ if (uart->bar) {
+ uart->bar = pci_conf_read32(uart->pb_bdf[0], uart->pb_bdf[1],
uart->pb_bdf[2],
+ PCI_BASE_ADDRESS_0 +
+ (sizeof(uint32_t) * uart->bar_idx));
uart->cr = pci_conf_read32(uart->pb_bdf[0], uart->pb_bdf[1],
uart->pb_bdf[2],
PCI_COMMAND);
}
@@ -460,37 +462,40 @@ static int __init check_existence(struct
}
static int
-magic_uart_config (struct ns16550 *uart,int skip_amt)
+pci_uart_config (struct ns16550 *uart, int skip_amt, int bar_idx)
{
uint16_t class;
- uint32_t bar0, len;
+ uint32_t bar, len;
int b, d, f;
/*Skanky hack - start at bus 1 to avoid AMT, a plug in card cannot be on bus 1
*/
- if (skip_amt) b=1;
- else b=0;
+ if (skip_amt)
+ b=1;
+ else
+ b=0;
for (; b < 0x100; ++b)
+ {
+ for (d = 0; d < 0x20; ++d)
{
- for (d = 0; d < 0x20; ++d)
- {
for (f = 0; f < 0x8; ++f)
- {
-
+ {
class = pci_conf_read16 (b, d, f, PCI_CLASS_DEVICE);
if (class != 0x700)
continue;;
- bar0 = pci_conf_read32 (b, d, f, PCI_BASE_ADDRESS_0);
+ bar = pci_conf_read32 (b, d, f, PCI_BASE_ADDRESS_0 +
+ (sizeof(uint32_t) * bar_idx));
/* Not IO */
- if (!(bar0 & 1))
+ if (!(bar & 1))
continue;
pci_conf_write32 (b, d, f, PCI_BASE_ADDRESS_0, 0xffffffff);
len = pci_conf_read32 (b, d, f, PCI_BASE_ADDRESS_0);
- pci_conf_write32 (b, d, f, PCI_BASE_ADDRESS_0, bar0);
+ pci_conf_write32 (b, d, f, PCI_BASE_ADDRESS_0 +
+ (sizeof(uint32_t) * bar_idx), bar);
/* Not 8 bytes */
if ((len & 0xffff) != 0xfff9)
@@ -499,8 +504,9 @@ magic_uart_config (struct ns16550 *uart,
uart->pb_bdf[0] = b;
uart->pb_bdf[1] = d;
uart->pb_bdf[2] = f;
- uart->bar0 = bar0;
- uart->io_base = bar0 & 0xfffe;
+ uart->bar = bar;
+ uart->bar_idx = bar_idx;
+ uart->io_base = bar & 0xfffe;
uart->irq = 0;
return 0;
@@ -569,15 +575,14 @@ static void __init ns16550_parse_port_co
if ( *conf == ',' )
{
conf++;
-
- if ( strncmp(conf,"magic",5) == 0 ) {
- if (magic_uart_config(uart,1))
- return;
- conf+=5;
- } else if ( strncmp(conf,"amt",3) == 0 ) {
- if (magic_uart_config(uart,0))
- return;
- conf+=3;
+ if ( strncmp(conf, "pci", 5) == 0 ) {
+ if (pci_uart_config(uart, 1/* skip AMT */, uart - ns16550_com))
+ return;
+ conf += 3;
+ } else if ( strncmp(conf, "amt", 3) == 0 ) {
+ if (pci_uart_config(uart, 0, uart - ns16550_com))
+ return;
+ conf += 3;
} else {
uart->io_base = simple_strtoul(conf, &conf, 0);
}
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home