|
Thank you, Stefano I have known that the first linux kernel version which include the PVONHVM feature is 2.6.36. But now, the question I have to face is our clients always required us to support other linux version, which not 2.6.36, perhaps 2.6.35, 2.6.34, 2.6.32... so I have to porting the PV drivers to these kernel version. At first, if the target kernel version is 2.6.2X, I ported the pv-drivers based on 2.6.18, these work not very hard, and I successfully. such ubuntu 8.04(2.6.24), debian5.05(2.6.26) But, if the target kernel version is 2.6.3X, these work seems very difficult, I couldn't complete it, the biggest trouble is can't debug the xen-blkfront. Since I known that the pv-drivers will be included in linux kernel 2.6.36, I studied the changes of it, and I try to port them to ubuntu10.10(2.6.35), based on 2.6.36, the result is system can boot successfully with xen-blkfront disk, but when I execute some commands such as: ls, mkdir... the system will be blocked, the phenomena just like before I have stated in this mail. What should I do next? Is this method ok? Could you please tell me, when you write the xen-blkfront disk drivers for linux kernel 2.6.36, how do you debug it when you meet errors? Thank you very much.
At 2011-04-21 01:24:25，"Stefano Stabellini" <stefano.stabellini@xxxxxxxxxxxxx> wrote:
>On Tue, 19 Apr 2011, topperxin wrote:
>> hi Stefano
>> thanks for your time
>> As your method, I modified my /boo/grub/grub.cfg of ubuntu10.10 like this:
>> ====================================================
>> menuentry 'Ubuntu, with Linux 2.6.35.4.pvonhvm' --class ubuntu --class gnu-linux --class gnu --class os {
>> recordfail
>> insmod part_msdos
>> insmod ext2
>> set root='(hd0,msdos1)'
>> search --no-floppy --fs-uuid --set 3336889c-576e-4088-a6ff-89e869289766
>> linux /boot/vmlinuz-2.6.35.4 root=UUID=3336889c-576e-4088-a6ff-89e869289766 ro xen_emul_unplug=aux-ide-disks
>> initrd /boot/initrd.img-2.6.35.4.pvonhvm.0415
>> }
>> =======================================================
>>
>> then I reboot the Guest OS , I found the boot disk is still the xen-blkfront, not the qemu emulate.
>
>aux-ide-disks means "do not unplug secondary emulated disks".
>
>
>> I reviewed the source of ./arch/x86/xen/platform-pci-unplug.c. there are several parameters, such as:
>>
>> ===================================================================
>> if (!strncmp(p, "all", l))
>> xen_emul_unplug |= XEN_UNPLUG_ALL;
>> else if (!strncmp(p, "ide-disks", l))
>> xen_emul_unplug |= XEN_UNPLUG_ALL_IDE_DISKS;
>> else if (!strncmp(p, "aux-ide-disks", l))
>> xen_emul_unplug |= XEN_UNPLUG_AUX_IDE_DISKS;
>> else if (!strncmp(p, "nics", l))
>> xen_emul_unplug |= XEN_UNPLUG_ALL_NICS;
>> else if (!strncmp(p, "unnecessary", l))
>> xen_emul_unplug |= XEN_UNPLUG_UNNECESSARY;
>> else if (!strncmp(p, "never", l)) xen_emul_unplug |= XEN_UNPLUG_NEVER;
>> =========================================================
>> In my opinion , If I want to use the emulated disk , I should set
>>
>> xen_emul_unplug = XEN_UNPLUG_UNNECESSARY or
>>
>> xen_emul_unplug = XEN_NEVER
>>
>> right? I try these two ways, but I still failed.
>
>If you specify xen_emul_unplug=XEN_UNPLUG_UNNECESSARY you prevent
>blkfront from hooking PV disks corresponding to emulated disks.
>Of course you have to make sure your root device is not /dev/xvda
>because that wouldn't work anymore, try root=/dev/sda if you want to
>make sure that you are using the emulated path.
>Also you need to specify hd* devices in your disk line in the VM config
>file, like this:
>
>disk = [ 'file:/root/images/debian_lenny_i386_small.raw,hda,w']
>
>
>>
>> Could you please tell me where can I get the source of
>>
>> kernel 2.6.35 with pvonhvm???
>
>The first Linux kernel to have PV on HVM support was Linux 2.6.36, so I
>don't have any 2.6.35 Linux tree with PV on HVM support. However a
>vanilla 2.6.36 (or 2.6.37 or 2.6.38) kernel should just work as PV on
>HVM kernel.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home