On Thu, Mar 24, 2011 at 05:39:50PM +0000, Goncalo Gomes wrote:
> I'm trying to setup an environment based on Lenny x86_64 + Xen4 Jeremy's
> stable 2.6.32.x tree. I can see Xen booting up from the serial console
> (logged and attached as dt29boot.log), however, it stops right after a
> number of "PCI add device (...)" lines.
>
> Not sure if relevant but as a part of my attempt at troubleshooting I
> switched into Xen's serial input by pressing ctrl+a three times and
> subsequently pressing 'Q'. Strangely, this seems to result in a list of
> PCI devices that is larger than the number of reportedly added PCI
> devices by Xen. Is this expected?
No., Those "ff" look strange.
>
> Any alternate hints and/or suggestions would be fairly welcome. I'm
> attaching some relevant information about the HW in question.
Try adding 'debug loglevel=10 earlyprintk=xenboot' on the Linux command line.
>
> Goncalo
>
>
> grub entry
>
> title Xen 4.2 unstable / 2.6.32.33
> root (hd0,0)
> kernel /boot/xen.gz com1=115200,8n1 console=com1,vga
> console_to_ring
> module /boot/vmlinuz-xen root=/dev/sda1 ro console=tty0
> xencons=hvc
> console=hvc0 earlyprintk=xen
> module /boot/initrd-xen
>
>
>
> Script started on Thu 24 Mar 2011 16:29:06 GMT
> goncalog@eire:~$ xenuse -t dt29
> [Enter `^Ec?' for help]
> [m[7;3H Xen 4.2 unstable / 2.6.32.33
> [7;75H[m[m[7m[6;3H Debian GNU/Linux, kernel 2.6.26-2-amd64
> (single-user mode) [6;75H[m[m[6;3H Debian GNU/Linux, kernel
> 2.6.26-2-amd64 (single-user mode) [6;75H[m[m[7m[7;3H Xen
> 4.2 unstable / 2.6.32.33
> [7;75H[m[H[J Booting 'Xen 4.2 unstable / 2.6.32.33'
>
> root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
> kernel /boot/xen.gz com1=115200,8n1 console=com1,vga console_to_ring
> [Multiboot-elf, <0x100000:0x188818:0x4c7e8>, shtab=0x2d5078,
> entry=0x100000]
> module /boot/vmlinuz-xen root=/dev/sda1 ro console=tty0 xencons=hvc
> console=hv
> c0 earlyprintk=xen
> [Multiboot-module @ 0x2d6000, 0x23de30 bytes]
> module /boot/initrd-xen
> [Multiboot-module @ 0x514000, 0x12d7a00 bytes]
>
> __ __ _ _ _ ___ __
> \ \/ /___ _ __ | || | / | / _ \ _ __ ___ / /_ _ __ _ __ ___
> \ // _ \ '_ \ | || |_ | || | | |__| '__/ __| '_ \ __| '_ \| '__/ _ \
> / \ __/ | | | |__ _|| || |_| |__| | | (__| (_) |__| |_) | | | __/
> /_/\_\___|_| |_| |_|(_)_(_)___/ |_| \___|\___/ | .__/|_| \___|
> |_|
> (XEN) Xen version 4.1.0-rc6-pre (scara@) (gcc version 4.5.1 20100907 (Red Hat
> 4.5.1-3) (GCC) ) Thu Feb 24 13:39:16 GMT 2011
> (XEN) Latest ChangeSet: Thu Feb 24 09:33:19 2011 +0000 22947:598d1fc295b6
> (XEN) Bootloader: GNU GRUB 0.97
> (XEN) Command line: com1=115200,8n1 console=com1,vga console_to_ring
> (XEN) Video information:
> (XEN) VGA is text mode 80x25, font 8x16
> (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
> (XEN) EDID info not retrieved because no DDC retrieval method detected
> (XEN) Disc information:
> (XEN) Found 1 MBR signatures
> (XEN) Found 1 EDD information structures
> (XEN) Xen-e820 RAM map:
> (XEN) 0000000000000000 - 000000000009e000 (usable)
> (XEN) 0000000000100000 - 00000000bf699000 (usable)
> (XEN) 00000000bf699000 - 00000000bf6af000 (reserved)
> (XEN) 00000000bf6af000 - 00000000bf6ce000 (ACPI data)
> (XEN) 00000000bf6ce000 - 00000000c0000000 (reserved)
> (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
> (XEN) 00000000fe000000 - 0000000100000000 (reserved)
> (XEN) 0000000100000000 - 0000000240000000 (usable)
> (XEN) ACPI: RSDP 000F0AA0, 0024 (r2 DELL )
> (XEN) ACPI: XSDT 000F0BA0, 008C (r1 DELL PE_SC3 1 DELL 1)
> (XEN) ACPI: FACP BF6C3BB4, 00F4 (r3 DELL PE_SC3 1 DELL 1)
> (XEN) ACPI: DSDT BF6AF000, 3E43 (r1 DELL PE_SC3 1 INTL 20050624)
> (XEN) ACPI: FACS BF6C6000, 0040
> (XEN) ACPI: APIC BF6C3478, 0152 (r1 DELL PE_SC3 1 DELL 1)
> (XEN) ACPI: SPCR BF6C35CC, 0050 (r1 DELL PE_SC3 1 DELL 1)
> (XEN) ACPI: HPET BF6C3620, 0038 (r1 DELL PE_SC3 1 DELL 1)
> (XEN) ACPI: DMAR BF6C365C, 00A8 (r1 DELL PE_SC3 1 DELL 1)
> (XEN) ACPI: MCFG BF6C3850, 003C (r1 DELL PE_SC3 1 DELL 1)
> (XEN) ACPI: WD__ BF6C3890, 0134 (r1 DELL PE_SC3 1 DELL 1)
> (XEN) ACPI: SLIC BF6C39C8, 0024 (r1 DELL PE_SC3 1 DELL 1)
> (XEN) ACPI: ERST BF6B2FC4, 0270 (r1 DELL PE_SC3 1 DELL 1)
> (XEN) ACPI: HEST BF6B3234, 03A8 (r1 DELL PE_SC3 1 DELL 1)
> (XEN) ACPI: BERT BF6B2E44, 0030 (r1 DELL PE_SC3 1 DELL 1)
> (XEN) ACPI: EINJ BF6B2E74, 0150 (r1 DELL PE_SC3 1 DELL 1)
> (XEN) ACPI: TCPA BF6C3B4C, 0064 (r2 DELL PE_SC3 1 DELL 1)
> (XEN) System RAM: 8182MB (8378588kB)
> (XEN) No NUMA configuration found
> (XEN) Faking a node at 0000000000000000-0000000240000000
> (XEN) Domain heap initialised
> (XEN) found SMP MP-table at 000fe710
> (XEN) DMI 2.6 present.
> (XEN) Using APIC driver default
> (XEN) ACPI: PM-Timer IO Port: 0x808
> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
> (XEN) ACPI: wakeup_vec[bf6c600c], vec_size[20]
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> (XEN) Processor #0 7:14 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> (XEN) Processor #2 7:14 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
> (XEN) Processor #4 7:14 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
> (XEN) Processor #6 7:14 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
> (XEN) Processor #1 7:14 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
> (XEN) Processor #3 7:14 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
> (XEN) Processor #5 7:14 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
> (XEN) Processor #7 7:14 APIC version 21
> (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
> (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> (XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
> (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
> (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> (XEN) PCI: MCFG area at e0000000 reserved in E820
> (XEN) ERST table is invalid
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
> (XEN) Detected 2660.049 MHz processor.
> (XEN) Initing memory sharing.
> (XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0
> extended MCE MSR 0
> (XEN) Intel machine check reporting enabled
> (XEN) Intel VT-d Snoop Control enabled.
> (XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
> (XEN) Intel VT-d Queued Invalidation enabled.
> (XEN) Intel VT-d Interrupt Remapping not enabled.
> (XEN) I/O virtualisation enabled
> (XEN) - Dom0 mode: Relaxed
> (XEN) ENABLING IO-APIC IRQs
> (XEN) -> Using new ACK method
> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
> (XEN) Platform timer is 14.318MHz HPET
> XEN) Allocated console ring of 64 KiB.
> (XEN) VMX: Supported advanced features:
> (XEN) - APIC MMIO access virtualisation
> (XEN) - APIC TPR shadow
> (XEN) - Extended Page Tables (EPT)
> (XEN) - Virtual-Processor Identifiers (VPID)
> (XEN) - Virtual NMI
> (XEN) - MSR direct-access bitmap
> (XEN) EPT supports 2MB super page.
> (XEN) HVM: ASIDs enabled.
> (XEN) HVM: VMX enabled
> (XEN) HVM: Hardware Assisted Paging detected.
> (XEN) Brought up 8 CPUs
> (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast
> (XEN) ACPI sleep modes: S3
> (XEN) mcheck_poll: Machine check polling timer started.
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x404000
> (XEN) elf_parse_binary: phdr: paddr=0x1404000 memsz=0x850d0
> (XEN) elf_parse_binary: phdr: paddr=0x148a000 memsz=0x888
> (XEN) elf_parse_binary: phdr: paddr=0x148b000 memsz=0x14e98
> (XEN) elf_parse_binary: phdr: paddr=0x14a0000 memsz=0x268000
> (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1708000
> (XEN) elf_xen_parse_note: GUEST_OS = "linux"
> (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
> (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
> (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
> (XEN) elf_xen_parse_note: ENTRY = 0xffffffff814a0200
> (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
> (XEN) elf_xen_parse_note: FEATURES =
> "!writable_page_tables|pae_pgdir_above_4gb"
> (XEN) elf_xen_parse_note: PAE_MODE = "yes"
> (XEN) elf_xen_parse_note: LOADER = "generic"
> (XEN) elf_xen_parse_note: unknown xen elf note (0xd)
> (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
> (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
> (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
> (XEN) elf_xen_addr_calc_check: addresses:
> (XEN) virt_base = 0xffffffff80000000
> (XEN) elf_paddr_offset = 0x0
> (XEN) virt_offset = 0xffffffff80000000
> (XEN) virt_kstart = 0xffffffff81000000
> (XEN) virt_kend = 0xffffffff81708000
> (XEN) virt_entry = 0xffffffff814a0200
> (XEN) p2m_base = 0xffffffffffffffff
> (XEN) Xen kernel: 64-bit, lsb, compat32
> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1708000
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN) Dom0 alloc.: 0000000234000000->0000000238000000 (2012036 pages to be
> allocated)
> (XEN) Init. ramdisk: 000000023ed28000->000000023ffffa00
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN) Loaded kernel: ffffffff81000000->ffffffff81708000
> (XEN) Init. ramdisk: ffffffff81708000->ffffffff829dfa00
> (XEN) Phys-Mach map: ffffffff829e0000->ffffffff839632e0
> (XEN) Start info: ffffffff83964000->ffffffff839644b4
> (XEN) Page tables: ffffffff83965000->ffffffff83986000
> (XEN) Boot stack: ffffffff83986000->ffffffff83987000
> (XEN) TOTAL: ffffffff80000000->ffffffff83c00000
> (XEN) ENTRY ADDRESS: ffffffff814a0200
> (XEN) Dom0 has maximum 8 VCPUs
> (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81404000
> (XEN) elf_load_binary: phdr 1 at 0xffffffff81404000 -> 0xffffffff814890d0
> (XEN) elf_load_binary: phdr 2 at 0xffffffff8148a000 -> 0xffffffff8148a888
> (XEN) elf_load_binary: phdr 3 at 0xffffffff8148b000 -> 0xffffffff8149fe98
> (XEN) elf_load_binary: phdr 4 at 0xffffffff814a0000 -> 0xffffffff81530000
> (XEN) Scrubbing Free RAM: .done.
> (XEN) Xen trace buffers: disabled
> (XEN) Std. Loglevel: All
> (XEN) Guest Loglevel: All
> (XEN) Xen is relinquishing VGA console.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
> Xen)
> (XEN) Freed 228kB init memory.
> mapping kernel into physical memory
> Xen: setup ISA identity maps
> about to get started...
> (XEN) PCI add device 00:00.0
> (XEN) PCI add device 00:03.0
> (XEN) PCI add device 00:05.0
> (XEN) PCI add device 00:08.0
> (XEN) PCI add device 00:08.1
> (XEN) PCI add device 00:08.2
> (XEN) PCI add device 00:08.3
> (XEN) PCI add device 00:10.0
> (XEN) PCI add device 00:10.1
> (XEN) PCI add device 00:1a.0
> (XEN) PCI add device 00:1c.0
> (XEN) PCI add device 00:1c.4
> (XEN) PCI add device 00:1d.0
> (XEN) PCI add device 00:1e.0
> (XEN) PCI add device 00:1f.0
> (XEN) PCI add device 00:1f.2
> (XEN) PCI add device 00:1f.5
> (XEN) PCI add device 03:00.0
> (XEN) PCI add device 02:00.0
> (XEN) PCI add device 02:00.1
> (XEN) PCI add device 01:03.0
> (XEN) *** Serial input -> Xen (type 'CTRL-a' three times to switch input to
> DOM0)
> (XEN) ==== PCI devices ====
> (XEN) ff:05.3 - dom 0 - MSIs < >
> (XEN) ff:05.2 - dom 0 - MSIs < >
> (XEN) ff:05.1 - dom 0 - MSIs < >
> (XEN) ff:05.0 - dom 0 - MSIs < >
> (XEN) ff:04.3 - dom 0 - MSIs < >
> (XEN) ff:04.2 - dom 0 - MSIs < >
> (XEN) ff:04.1 - dom 0 - MSIs < >
> (XEN) ff:04.0 - dom 0 - MSIs < >
> (XEN) ff:03.4 - dom 0 - MSIs < >
> (XEN) ff:03.2 - dom 0 - MSIs < >
> (XEN) ff:03.1 - dom 0 - MSIs < >
> (XEN) ff:03.0 - dom 0 - MSIs < >
> (XEN) ff:02.1 - dom 0 - MSIs < >
> (XEN) ff:02.0 - dom 0 - MSIs < >
> (XEN) ff:00.1 - dom 0 - MSIs < >
> (XEN) ff:00.0 - dom 0 - MSIs < >
> (XEN) 03:00.0 - dom 0 - MSIs < >
> (XEN) 02:00.1 - dom 0 - MSIs < >
> (XEN) 02:00.0 - dom 0 - MSIs < >
> (XEN) 01:03.0 - dom 0 - MSIs < >
> (XEN) 00:1f.5 - dom 0 - MSIs < >
> (XEN) 00:1f.2 - dom 0 - MSIs < >
> (XEN) 00:1f.0 - dom 0 - MSIs < >
> (XEN) 00:1e.0 - dom 0 - MSIs < >
> (XEN) 00:1d.0 - dom 0 - MSIs < >
> (XEN) 00:1c.4 - dom 0 - MSIs < 36 >
> (XEN) 00:1c.0 - dom 0 - MSIs < 35 >
> (XEN) 00:1a.0 - dom 0 - MSIs < >
> (XEN) 00:10.1 - dom 0 - MSIs < >
> (XEN) 00:10.0 - dom 0 - MSIs < >
> (XEN) 00:08.3 - dom 0 - MSIs < >
> (XEN) 00:08.2 - dom 0 - MSIs < >
> (XEN) 00:08.1 - dom 0 - MSIs < >
> (XEN) 00:08.0 - dom 0 - MSIs < >
> (XEN) 00:05.0 - dom 0 - MSIs < 34 >
> (XEN) 00:03.0 - dom 0 - MSIs < 33 >
> (XEN) 00:00.0 - dom 0 - MSIs < >
> [disconnect]
> Script done on Thu 24 Mar 2011 16:30:23 GMT
> # dmidecode 2.9
> SMBIOS 2.6 present.
> 66 structures occupying 3175 bytes.
> Table at 0xBF79C000.
>
> Handle 0xDA00, DMI type 218, 11 bytes
> OEM-specific Type
> Header and Data:
> DA 0B 00 DA B2 00 17 00 0E 20 00
>
> Handle 0x0000, DMI type 0, 24 bytes
> BIOS Information
> Vendor: Dell Inc.
> Version: 1.1.5
> Release Date: 05/24/2010
> Address: 0xF0000
> Runtime Size: 64 kB
> ROM Size: 4096 kB
> Characteristics:
> ISA is supported
> PCI is supported
> PNP is supported
> BIOS is upgradeable
> BIOS shadowing is allowed
> Boot from CD is supported
> Selectable boot is supported
> EDD is supported
> Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
> 5.25"/360 KB floppy services are supported (int 13h)
> 5.25"/1.2 MB floppy services are supported (int 13h)
> 3.5"/720 KB floppy services are supported (int 13h)
> 8042 keyboard services are supported (int 9h)
> Serial services are supported (int 14h)
> CGA/mono video services are supported (int 10h)
> ACPI is supported
> USB legacy is supported
> BIOS boot specification is supported
> Function key-initiated network boot is supported
> Targeted content distribution is supported
> BIOS Revision: 1.1
>
> Handle 0x0100, DMI type 1, 27 bytes
> System Information
> Manufacturer: Dell Inc.
> Product Name: PowerEdge R310
> Version: Not Specified
> Serial Number: 7V8CW4J
> UUID: 44454C4C-5600-1038-8043-B7C04F57344A
> Wake-up Type: Power Switch
> SKU Number: Not Specified
> Family: Not Specified
>
> Handle 0x0200, DMI type 2, 9 bytes
> Base Board Information
> Manufacturer: Dell Inc.
> Product Name: 05XKKK
> Version: A00
> Serial Number: ..CN1374008H00Q0.
>
> Handle 0x0300, DMI type 3, 21 bytes
> Chassis Information
> Manufacturer: Dell Inc.
> Type: Rack Mount Chassis
> Lock: Present
> Version: Not Specified
> Serial Number: 7V8CW4J
> Asset Tag: Not Specified
> Boot-up State: Safe
> Power Supply State: Safe
> Thermal State: Safe
> Security Status: Unknown
> OEM Information: 0x00000000
> Height: 1 U
> Number Of Power Cords: Unspecified
> Contained Elements: 0
>
> Handle 0x0400, DMI type 4, 40 bytes
> Processor Information
> Socket Designation: CPU1
> Type: Central Processor
> Family: Xeon
> Manufacturer: Intel
> ID: E5 06 01 00 FF FB EB BF
> Signature: Type 0, Family 6, Model 30, Stepping 5
> Flags:
> FPU (Floating-point unit on-chip)
> VME (Virtual mode extension)
> DE (Debugging extension)
> PSE (Page size extension)
> TSC (Time stamp counter)
> MSR (Model specific registers)
> PAE (Physical address extension)
> MCE (Machine check exception)
> CX8 (CMPXCHG8 instruction supported)
> APIC (On-chip APIC hardware supported)
> SEP (Fast system call)
> MTRR (Memory type range registers)
> PGE (Page global enable)
> MCA (Machine check architecture)
> CMOV (Conditional move instruction supported)
> PAT (Page attribute table)
> PSE-36 (36-bit page size extension)
> CLFSH (CLFLUSH instruction supported)
> DS (Debug store)
> ACPI (ACPI supported)
> MMX (MMX technology supported)
> FXSR (Fast floating-point save and restore)
> SSE (Streaming SIMD extensions)
> SSE2 (Streaming SIMD extensions 2)
> SS (Self-snoop)
> HTT (Hyper-threading technology)
> TM (Thermal monitor supported)
> PBE (Pending break enabled)
> Version: Intel(R) Xeon(R) CPU X3450 @ 2.67GHz
> Voltage: 1.2 V
> External Clock: 4800 MHz
> Max Speed: 3600 MHz
> Current Speed: 2666 MHz
> Status: Populated, Enabled
> Upgrade: <OUT OF SPEC>
> L1 Cache Handle: 0x0700
> L2 Cache Handle: 0x0701
> L3 Cache Handle: 0x0702
> Serial Number: Not Specified
> Asset Tag: Not Specified
> Part Number: Not Specified
> Core Count: 4
> Core Enabled: 4
> Thread Count: 8
> Characteristics:
> 64-bit capable
>
> Handle 0x0700, DMI type 7, 19 bytes
> Cache Information
> Socket Designation: Not Specified
> Configuration: Enabled, Not Socketed, Level 1
> Operational Mode: Write Back
> Location: Internal
> Installed Size: 128 KB
> Maximum Size: 128 KB
> Supported SRAM Types:
> Unknown
> Installed SRAM Type: Unknown
> Speed: Unknown
> Error Correction Type: Single-bit ECC
> System Type: Data
> Associativity: 8-way Set-associative
>
> Handle 0x0701, DMI type 7, 19 bytes
> Cache Information
> Socket Designation: Not Specified
> Configuration: Enabled, Not Socketed, Level 2
> Operational Mode: Write Back
> Location: Internal
> Installed Size: 1024 KB
> Maximum Size: 2048 KB
> Supported SRAM Types:
> Unknown
> Installed SRAM Type: Unknown
> Speed: Unknown
> Error Correction Type: Single-bit ECC
> System Type: Unified
> Associativity: 8-way Set-associative
>
> Handle 0x0702, DMI type 7, 19 bytes
> Cache Information
> Socket Designation: Not Specified
> Configuration: Enabled, Not Socketed, Level 3
> Operational Mode: Write Back
> Location: Internal
> Installed Size: 8192 KB
> Maximum Size: 8192 KB
> Supported SRAM Types:
> Unknown
> Installed SRAM Type: Unknown
> Speed: Unknown
> Error Correction Type: Single-bit ECC
> System Type: Unified
> Associativity: 16-way Set-associative
>
> Handle 0x0800, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: Not Specified
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: DB-15 female
> Port Type: Video Port
>
> Handle 0x0801, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: Not Specified
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: DB-15 female
> Port Type: Video Port
>
> Handle 0x0802, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: Not Specified
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Access Bus (USB)
> Port Type: USB
>
> Handle 0x0803, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: Not Specified
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Access Bus (USB)
> Port Type: USB
>
> Handle 0x0804, DMI type 126, 9 bytes
> Inactive
>
> Handle 0x0805, DMI type 126, 9 bytes
> Inactive
>
> Handle 0x0806, DMI type 126, 9 bytes
> Inactive
>
> Handle 0x0807, DMI type 126, 9 bytes
> Inactive
>
> Handle 0x0808, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: Not Specified
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Access Bus (USB)
> Port Type: USB
>
> Handle 0x0809, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: Not Specified
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: Access Bus (USB)
> Port Type: USB
>
> Handle 0x080A, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: INT_USB1
> Internal Connector Type: Access Bus (USB)
> External Reference Designator: Not Specified
> External Connector Type: None
> Port Type: USB
>
> Handle 0x080B, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: INT_USB2
> Internal Connector Type: Access Bus (USB)
> External Reference Designator: Not Specified
> External Connector Type: None
> Port Type: USB
>
> Handle 0x080C, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: INT_SATA1
> Internal Connector Type: SAS/SATA Plug Receptacle
> External Reference Designator: Not Specified
> External Connector Type: None
> Port Type: SATA
>
> Handle 0x080D, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: INT_SATA2
> Internal Connector Type: SAS/SATA Plug Receptacle
> External Reference Designator: Not Specified
> External Connector Type: None
> Port Type: SATA
>
> Handle 0x080E, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: INT_SATA3
> Internal Connector Type: SAS/SATA Plug Receptacle
> External Reference Designator: Not Specified
> External Connector Type: None
> Port Type: SATA
>
> Handle 0x080F, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: INT_SATA4
> Internal Connector Type: SAS/SATA Plug Receptacle
> External Reference Designator: Not Specified
> External Connector Type: None
> Port Type: SATA
>
> Handle 0x0810, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: INT_SATA5
> Internal Connector Type: SAS/SATA Plug Receptacle
> External Reference Designator: Not Specified
> External Connector Type: None
> Port Type: SATA
>
> Handle 0x0811, DMI type 126, 9 bytes
> Inactive
>
> Handle 0x0812, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: Not Specified
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: RJ-45
> Port Type: Network Port
>
> Handle 0x0813, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: Not Specified
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: RJ-45
> Port Type: Network Port
>
> Handle 0x0814, DMI type 8, 9 bytes
> Port Connector Information
> Internal Reference Designator: Not Specified
> Internal Connector Type: None
> External Reference Designator: Not Specified
> External Connector Type: DB-9 male
> Port Type: Serial Port 16550A Compatible
>
> Handle 0x0900, DMI type 9, 17 bytes
> System Slot Information
> Designation: PCIE1
> Type: x8 <OUT OF SPEC>
> Current Usage: Available
> Length: Long
> Characteristics:
> 3.3 V is provided
> PME signal is supported
>
> Handle 0x0901, DMI type 9, 17 bytes
> System Slot Information
> Designation: PCIE2
> Type: x8 <OUT OF SPEC>
> Current Usage: Available
> Length: Long
> Characteristics:
> 3.3 V is provided
> PME signal is supported
>
> Handle 0x0902, DMI type 126, 17 bytes
> Inactive
>
> Handle 0x0903, DMI type 126, 17 bytes
> Inactive
>
> Handle 0x0904, DMI type 126, 17 bytes
> Inactive
>
> Handle 0x0A00, DMI type 10, 12 bytes
> On Board Device 1 Information
> Type: Video
> Status: Enabled
> Description: Embedded Matrox G200 Video
> On Board Device 2 Information
> Type: Ethernet
> Status: Enabled
> Description: Embedded Broadcom 5716 NIC 1
> On Board Device 3 Information
> Type: Ethernet
> Status: Enabled
> Description: Embedded Broadcom 5716 NIC 2
> On Board Device 4 Information
> Type: SAS Controller
> Status: Enabled
> Description: Integrated SAS Controller
>
> Handle 0x0B00, DMI type 11, 5 bytes
> OEM Strings
> String 1: Dell System
> String 2: 5[0000]
>
> Handle 0x7E00, DMI type 126, 170 bytes
> Inactive
>
> Handle 0x0C00, DMI type 12, 5 bytes
> System Configuration Options
> Option 1: NVRAM_CLR: Clear user settable NVRAM areas and set defaults
> Option 2: PWRD_EN: Close to enable password
>
> Handle 0x0D00, DMI type 13, 22 bytes
> BIOS Language Information
> Installable Languages: 1
> en|US|iso8859-1
> Currently Installed Language: en|US|iso8859-1
>
> Handle 0x1000, DMI type 16, 15 bytes
> Physical Memory Array
> Location: System Board Or Motherboard
> Use: System Memory
> Error Correction Type: Multi-bit ECC
> Maximum Capacity: 32 GB
> Error Information Handle: Not Provided
> Number Of Devices: 6
>
> Handle 0x1100, DMI type 17, 28 bytes
> Memory Device
> Array Handle: 0x1000
> Error Information Handle: Not Provided
> Total Width: 72 bits
> Data Width: 64 bits
> Size: 2048 MB
> Form Factor: DIMM
> Set: 1
> Locator: DIMM_A1
> Bank Locator: Not Specified
> Type: <OUT OF SPEC>
> Type Detail: Synchronous
> Speed: 1333 MHz (0.8 ns)
> Manufacturer: 00AD000080AD
> Serial Number: 0FA35777
> Asset Tag: 01103000
> Part Number: HMT125U7TFR8C-H9
>
> Handle 0x1101, DMI type 17, 28 bytes
> Memory Device
> Array Handle: 0x1000
> Error Information Handle: Not Provided
> Total Width: 72 bits
> Data Width: 64 bits
> Size: 2048 MB
> Form Factor: DIMM
> Set: 1
> Locator: DIMM_A2
> Bank Locator: Not Specified
> Type: <OUT OF SPEC>
> Type Detail: Synchronous
> Speed: 1333 MHz (0.8 ns)
> Manufacturer: 00AD000080AD
> Serial Number: 0F635782
> Asset Tag: 01103000
> Part Number: HMT125U7TFR8C-H9
>
> Handle 0x1102, DMI type 17, 28 bytes
> Memory Device
> Array Handle: 0x1000
> Error Information Handle: Not Provided
> Total Width: 72 bits
> Data Width: 64 bits
> Size: 2048 MB
> Form Factor: DIMM
> Set: 2
> Locator: DIMM_A3
> Bank Locator: Not Specified
> Type: <OUT OF SPEC>
> Type Detail: Synchronous
> Speed: 1333 MHz (0.8 ns)
> Manufacturer: 00AD000080AD
> Serial Number: 0F23577E
> Asset Tag: 01103000
> Part Number: HMT125U7TFR8C-H9
>
> Handle 0x1103, DMI type 17, 28 bytes
> Memory Device
> Array Handle: 0x1000
> Error Information Handle: Not Provided
> Total Width: 72 bits
> Data Width: 64 bits
> Size: 2048 MB
> Form Factor: DIMM
> Set: 2
> Locator: DIMM_A4
> Bank Locator: Not Specified
> Type: <OUT OF SPEC>
> Type Detail: Synchronous
> Speed: 1333 MHz (0.8 ns)
> Manufacturer: 00AD000080AD
> Serial Number: 0F535115
> Asset Tag: 01103000
> Part Number: HMT125U7TFR8C-H9
>
> Handle 0x1104, DMI type 17, 28 bytes
> Memory Device
> Array Handle: 0x1000
> Error Information Handle: Not Provided
> Total Width: 72 bits
> Data Width: 64 bits
> Size: No Module Installed
> Form Factor: DIMM
> Set: 3
> Locator: DIMM_A5
> Bank Locator: Not Specified
> Type: <OUT OF SPEC>
> Type Detail: Synchronous
> Speed: Unknown
> Manufacturer:
> Serial Number:
> Asset Tag:
> Part Number:
>
> Handle 0x1105, DMI type 17, 28 bytes
> Memory Device
> Array Handle: 0x1000
> Error Information Handle: Not Provided
> Total Width: 72 bits
> Data Width: 64 bits
> Size: No Module Installed
> Form Factor: DIMM
> Set: 3
> Locator: DIMM_A6
> Bank Locator: Not Specified
> Type: <OUT OF SPEC>
> Type Detail: Synchronous
> Speed: Unknown
> Manufacturer:
> Serial Number:
> Asset Tag:
> Part Number:
>
> Handle 0x1300, DMI type 19, 15 bytes
> Memory Array Mapped Address
> Starting Address: 0x00000000000
> Ending Address: 0x000BFFFFFFF
> Range Size: 3 GB
> Physical Array Handle: 0x1000
> Partition Width: 0
>
> Handle 0x1301, DMI type 19, 15 bytes
> Memory Array Mapped Address
> Starting Address: 0x00100000000
> Ending Address: 0x0023FFFFFFF
> Range Size: 5 GB
> Physical Array Handle: 0x1000
> Partition Width: 0
>
> Handle 0x2000, DMI type 32, 11 bytes
> System Boot Information
> Status: No errors detected
>
> Handle 0x2600, DMI type 38, 18 bytes
> IPMI Device Information
> Interface Type: KCS (Keyboard Control Style)
> Specification Version: 2.0
> I2C Slave Address: 0x10
> NV Storage Device: Not Present
> Base Address: 0x0000000000000CA8 (I/O)
> Register Spacing: 32-bit Boundaries
>
> Handle 0x2900, DMI type 41, 11 bytes
> Unknown Type
> Header and Data:
> 29 0B 00 29 01 85 01 00 00 02 00
> Strings:
> Embedded NIC 1
>
> Handle 0x2901, DMI type 41, 11 bytes
> Unknown Type
> Header and Data:
> 29 0B 01 29 01 85 02 00 00 02 01
> Strings:
> Embedded NIC 2
>
> Handle 0x2902, DMI type 41, 11 bytes
> Unknown Type
> Header and Data:
> 29 0B 02 29 01 8A 04 00 00 03 00
> Strings:
> Integrated SAS
>
> Handle 0x2903, DMI type 126, 11 bytes
> Inactive
>
> Handle 0x2904, DMI type 41, 11 bytes
> Unknown Type
> Header and Data:
> 29 0B 04 29 01 83 04 00 00 01 18
> Strings:
> Embedded Video
>
> Handle 0xD000, DMI type 208, 16 bytes
> OEM-specific Type
> Header and Data:
> D0 10 00 D0 02 00 FE 00 A3 02 00 00 00 01 00 00
>
> Handle 0xD200, DMI type 210, 12 bytes
> OEM-specific Type
> Header and Data:
> D2 0C 00 D2 F8 03 04 03 06 80 04 05
>
> Handle 0xD400, DMI type 212, 87 bytes
> OEM-specific Type
> Header and Data:
> D4 57 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
> 01 43 00 11 FE 00 70 01 11 9F 20 6F 01 11 9F 00
> 00 00 11 9F 20 00 00 11 9F 00 31 40 11 FB 00 32
> 40 11 FB 04 9D 00 11 FD 02 9E 00 11 FD 00 9F 00
> 26 FE 01 A0 00 26 FE 00 28 40 26 DF 20 29 40 26
> DF 00 FF FF 00 00 00
>
> Handle 0xD401, DMI type 212, 242 bytes
> OEM-specific Type
> Header and Data:
> D4 F2 01 D4 70 00 71 00 03 40 5A 6D 5C 00 78 BF
> 40 5D 00 78 BF 00 6C 01 57 FC 00 6B 01 57 FC 01
> 6A 01 57 FC 02 12 02 57 EF 00 11 02 57 EF 10 77
> 01 54 FC 00 78 01 54 FC 01 79 01 54 FC 02 7A 01
> 54 FC 03 33 40 54 CF 00 34 40 54 CF 10 35 40 54
> CF 20 36 40 54 CF 30 1A 40 54 FB 04 1B 40 54 FB
> 00 1C 40 54 F7 08 1D 40 54 F7 00 43 40 58 DF 20
> 42 40 58 DF 00 24 40 58 BF 40 25 40 58 BF 00 6E
> 00 58 FC 01 2D 00 58 FC 02 DA 01 58 FC 03 22 40
> 58 EF 10 23 40 58 EF 00 BB 00 58 F3 04 BC 00 58
> F3 08 DB 01 58 F3 0C 2D 02 55 FE 01 2E 02 55 FE
> 00 D8 00 55 7F 80 D9 00 55 7F 00 54 02 56 DF 00
> 57 02 56 DF 20 4D 02 56 BF 00 4E 02 56 BF 40 2D
> 01 56 7F 80 2E 01 56 7F 00 00 C0 5C 00 0A 03 C0
> 67 00 05 83 00 76 00 00 84 00 77 00 00 FF FF 00
> 00 00
>
> Handle 0xD402, DMI type 212, 172 bytes
> OEM-specific Type
> Header and Data:
> D4 AC 02 D4 72 00 73 00 00 40 5D 5E D3 00 00 00
> 02 D4 00 02 00 02 4A 01 46 BF 40 4B 01 46 BF 00
> 00 90 2C 00 00 01 90 2D 00 00 DE 00 63 FE 01 26
> 40 42 FE 01 27 40 42 FE 00 17 01 4A FE 00 18 01
> 4A FE 01 19 01 4A FD 00 1A 01 4A FD 02 1B 01 4A
> FB 00 1C 01 4A FB 04 1D 01 4A F7 00 1E 01 4A F7
> 08 1F 01 44 FE 00 20 01 44 FE 01 00 00 44 FD 00
> 00 00 44 FD 02 35 01 4B FC 00 37 01 4B FC 01 39
> 01 4B FC 02 3B 01 4B F3 04 02 40 46 DF 00 01 40
> 46 DF 20 FC 01 45 BF 00 FD 01 45 BF 40 00 00 45
> 7F 80 00 00 45 7F 00 FF FF 00 00 00
>
> Handle 0xD403, DMI type 212, 97 bytes
> OEM-specific Type
> Header and Data:
> D4 61 03 D4 72 00 73 00 00 40 5D 5E D1 00 46 FE
> 00 D2 00 46 FE 01 40 01 47 EF 10 41 01 47 EF 00
> EB 01 47 FD 00 EA 01 47 FD 02 33 02 47 F3 04 32
> 02 47 F3 08 31 02 47 F3 00 6E 02 47 F3 00 4B 02
> 47 DF 00 4C 02 47 DF 20 44 01 4E CF 00 45 01 4E
> CF 10 4A 02 4E F3 04 0C 80 4E F3 08 FF FF 00 00
> 00
>
> Handle 0xD800, DMI type 216, 9 bytes
> OEM-specific Type
> Header and Data:
> D8 09 00 D8 01 02 01 00 00
> Strings:
> MATROX
> VGA/VBE BIOS, Version V3.8WO
>
> Handle 0xDE00, DMI type 222, 16 bytes
> OEM-specific Type
> Header and Data:
> DE 10 00 DE 01 08 FF FF 00 00 00 00 00 00 00 01
>
> Handle 0xE100, DMI type 225, 33 bytes
> OEM-specific Type
> Header and Data:
> E1 21 00 E1 01 01 00 04 00 02 00 11 00 03 01 11
> 00 04 02 11 00 05 03 11 00 06 04 11 00 07 05 11
> 00
> Strings:
> CPU.Socket.1
> DIMM.Socket.A1
> DIMM.Socket.A2
> DIMM.Socket.A3
> DIMM.Socket.A4
> DIMM.Socket.A5
> DIMM.Socket.A6
>
> Handle 0x7F00, DMI type 127, 4 bytes
> End Of Table
>
> 00:00.0 Host bridge: Intel Corporation Clarksfield/Lynnfield DMI (rev 11)
> Subsystem: Dell Device 02a3
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1
> Enable-
> Address: 00000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [90] Express (v1) Root Port (Slot-), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
> Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency
> L0 <512ns, L1 <4us
> ClockPM- Suprise+ LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
> DLActive+ BWMgmt- ABWMgmt-
> RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna-
> CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [e0] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [150] Access Controls <?>
> Capabilities: [160] Vendor Specific Information <?>
>
> 00:03.0 PCI bridge: Intel Corporation Clarksfield/Lynnfield PCI Express Root
> Port 1 (rev 11) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: Dell Device 02a3
> Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1
> Enable+
> Address: feeff00c Data: 4151
> Masking: 00000002 Pending: 00000000
> Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
> Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0
> <512ns, L1 <4us
> ClockPM- Suprise+ LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surpise-
> Slot # 1, PowerLimit 25.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> LinkChg-
> Control: AttnInd Off, PwrInd Off, Power+ Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
> Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+
> CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [e0] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [150] Access Controls <?>
> Capabilities: [160] Vendor Specific Information <?>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:05.0 PCI bridge: Intel Corporation Clarksfield/Lynnfield PCI Express Root
> Port 3 (rev 11) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Subsystem: Dell Device 02a3
> Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1
> Enable+
> Address: feeff00c Data: 4159
> Masking: 00000002 Pending: 00000000
> Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag+ RBE+ FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
> Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #3, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0
> <512ns, L1 <4us
> ClockPM- Suprise+ LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
> Surpise-
> Slot # 2, PowerLimit 25.000000; Interlock- NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> LinkChg-
> Control: AttnInd Off, PwrInd Off, Power+ Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
> Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+
> CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [e0] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [150] Access Controls <?>
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:08.0 System peripheral: Intel Corporation Clarksfield/Lynnfield System
> Management Registers (rev 11)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
> unlimited, L1 unlimited
> ClockPM- Suprise+ LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Vendor Specific Information <?>
>
> 00:08.1 System peripheral: Intel Corporation Clarksfield/Lynnfield Semaphore
> and Scratchpad Registers (rev 11)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
> unlimited, L1 unlimited
> ClockPM- Suprise+ LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Vendor Specific Information <?>
>
> 00:08.2 System peripheral: Intel Corporation Clarksfield/Lynnfield System
> Control and Status Registers (rev 11)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0
> unlimited, L1 unlimited
> ClockPM- Suprise+ LLActRep+ BwNot+
> LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Vendor Specific Information <?>
>
> 00:08.3 System peripheral: Intel Corporation Clarksfield/Lynnfield
> Miscellaneous Registers (rev 11)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
>
> 00:10.0 System peripheral: Intel Corporation Device d150 (rev 11)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
>
> 00:10.1 System peripheral: Intel Corporation Device d151 (rev 11)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
>
> 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host
> Controller (rev 05) (prog-if 20 [EHCI])
> Subsystem: Dell Device 02a3
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at df0fc000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Debug port: BAR=1 offset=00a0
> Capabilities: [98] PCIe advanced features <?>
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev
> 05) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000f000-0000ffff
> Memory behind bridge: df100000-df2fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
> Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
> LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency
> L0 <256ns, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
> DLActive+ BWMgmt- ABWMgmt-
> RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna-
> CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
> Enable+
> Address: feeff00c Data: 4161
> Capabilities: [90] Subsystem: Dell Device 02a3
> Capabilities: [a0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev
> 05) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> Memory behind bridge: da000000-ddffffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag- RBE+ FLReset-
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
> Unsupported+
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
> LnkCap: Port #5, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency
> L0 <256ns, L1 <4us
> ClockPM- Suprise- LLActRep+ BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
> DLActive+ BWMgmt- ABWMgmt-
> RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna-
> CRSVisible-
> RootCap: CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
> Enable+
> Address: feeff00c Data: 4169
> Capabilities: [90] Subsystem: Dell Device 02a3
> Capabilities: [a0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pcieport-driver
> Kernel modules: shpchp
>
> 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host
> Controller (rev 05) (prog-if 20 [EHCI])
> Subsystem: Dell Device 02a3
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at df0fe000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] Debug port: BAR=1 offset=00a0
> Capabilities: [98] PCIe advanced features <?>
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if 01
> [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> Memory behind bridge: de000000-deffffff
> Prefetchable memory behind bridge: 00000000d9800000-00000000d9ffffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [50] Subsystem: Dell Device 02a3
>
> 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev
> 05)
> Subsystem: Dell Device 02a3
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [e0] Vendor Specific Information <?>
>
> 00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller
> (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
> Subsystem: Dell Device 02a3
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 20
> Region 0: I/O ports at eca0 [size=8]
> Region 1: I/O ports at ec90 [size=4]
> Region 2: I/O ports at eca8 [size=8]
> Region 3: I/O ports at ec94 [size=4]
> Region 4: I/O ports at ecc0 [size=16]
> Region 5: I/O ports at ecd0 [size=16]
> Capabilities: [70] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] PCIe advanced features <?>
> Kernel driver in use: ata_piix
> Kernel modules: ata_generic, ata_piix, ide-pci-generic
>
> 00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller
> (rev 05) (prog-if 85 [Master SecO PriO])
> Subsystem: Dell Device 02a3
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 21
> Region 0: I/O ports at ecb0 [size=8]
> Region 1: I/O ports at ec98 [size=4]
> Region 2: I/O ports at ecb8 [size=8]
> Region 3: I/O ports at ec9c [size=4]
> Region 4: I/O ports at ece0 [size=16]
> Region 5: I/O ports at ecf0 [size=16]
> Capabilities: [70] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [b0] PCIe advanced features <?>
> Kernel driver in use: ata_piix
> Kernel modules: ata_generic, ata_piix, ide-pci-generic
>
> 01:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450
> [Hermon] - Winbond/Nuvoton (rev 0a) (prog-if 00 [VGA controller])
> Subsystem: Dell Device 02a3
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 6
> Region 0: Memory at d9800000 (32-bit, prefetchable) [size=8M]
> Region 1: Memory at de7fc000 (32-bit, non-prefetchable) [size=16K]
> Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M]
> [virtual] Expansion ROM at de000000 [disabled] [size=64K]
> Capabilities: [dc] Power Management version 1
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716
> Gigabit Ethernet (rev 20)
> Subsystem: Dell Device 02a3
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M]
> Capabilities: [48] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data <?>
> Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4
> Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [a0] MSI-X: Enable+ Mask- TabSize=9
> Vector table: BAR=0 offset=0000c000
> PBA: BAR=0 offset=0000e000
> Capabilities: [ac] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1
> <64us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
> Unsupported+
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency
> L0 <2us, L1 <2us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Device Serial Number 2a-88-52-fe-ff-2b-2b-84
> Capabilities: [110] Advanced Error Reporting <?>
> Capabilities: [150] Power Budgeting <?>
> Capabilities: [160] Virtual Channel <?>
> Kernel driver in use: bnx2
> Kernel modules: bnx2
>
> 02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716
> Gigabit Ethernet (rev 20)
> Subsystem: Dell Device 02a3
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin B routed to IRQ 17
> Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
> Capabilities: [48] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data <?>
> Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4
> Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [a0] MSI-X: Enable- Mask- TabSize=9
> Vector table: BAR=0 offset=0000c000
> PBA: BAR=0 offset=0000e000
> Capabilities: [ac] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1
> <64us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
> Unsupported+
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency
> L0 <2us, L1 <2us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100] Device Serial Number 2b-88-52-fe-ff-2b-2b-84
> Capabilities: [110] Advanced Error Reporting <?>
> Capabilities: [150] Power Budgeting <?>
> Capabilities: [160] Virtual Channel <?>
> Kernel driver in use: bnx2
> Kernel modules: bnx2
>
> 03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E
> PCI-Express Fusion-MPT SAS (rev 08)
> Subsystem: Dell SAS 6/iR Integrated Blades RAID Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 1275
> Region 0: I/O ports at fc00 [size=256]
> Region 1: Memory at df2ec000 (64-bit, non-prefetchable) [size=16K]
> Region 3: Memory at df2f0000 (64-bit, non-prefetchable) [size=64K]
> Expansion ROM at df100000 [disabled] [size=1M]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [68] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns,
> L1 <1us
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal+
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency
> L0 <64ns, L1 <1us
> ClockPM- Suprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk-
> DLActive- BWMgmt- ABWMgmt-
> Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
> Enable+
> Address: 00000000feeff00c Data: 4181
> Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
> Vector table: BAR=1 offset=00002000
> PBA: BAR=1 offset=00003000
> Capabilities: [100] Advanced Error Reporting <?>
> Kernel driver in use: mptsas
> Kernel modules: mptsas
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home