WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

[Xen-devel] [PATCH] watchdog, SP5100: Check if firmware has set correct

To: Mike Waychison <mikew@xxxxxxxxxx>, Wim Van Sebroeck <wim@xxxxxxxxx>
Subject: [Xen-devel] [PATCH] watchdog, SP5100: Check if firmware has set correct value in tcobase.
From: Yinghai Lu <yinghai@xxxxxxxxxx>
Date: Wed, 16 Mar 2011 14:18:17 -0700
Cc: Priyanka Gupta <priyankag@xxxxxxxxxx>, Jeremy Fitzhardinge <jeremy@xxxxxxxx>, "xen-devel@xxxxxxxxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxxxxxxxx>, linux-watchdog@xxxxxxxxxxxxxxx, Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>, Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>, "linux-kernel@xxxxxxxxxxxxxxx" <linux-kernel@xxxxxxxxxxxxxxx>, "H. Peter Anvin" <hpa@xxxxxxxxx>
Delivery-date: Wed, 16 Mar 2011 14:19:47 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <AANLkTimNva3c_-kGA+JLCPZgrKAbwqLKaN559cwTh7cq@xxxxxxxxxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
References: <alpine.DEB.2.00.1103111201470.2968@kaball-desktop> <20110311222129.GA3168@xxxxxxxxxxxx> <alpine.DEB.2.00.1103161150010.3382@kaball-desktop> <alpine.DEB.2.00.1103161442210.3382@kaball-desktop> <4D80F992.10603@xxxxxxxxxx> <alpine.DEB.2.00.1103161757040.3382@kaball-desktop> <4D812180.5030102@xxxxxxxxxx> <AANLkTimNva3c_-kGA+JLCPZgrKAbwqLKaN559cwTh7cq@xxxxxxxxxxxxxx>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.14) Gecko/20110221 SUSE/3.1.8 Thunderbird/3.1.8


Stefano found SP5100 TCO watchdog driver using wrong address.

[    9.148536] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[    9.148628] DEBUG __ioremap_caller WARNING address=b8fe00 size=8 valid=1 
reserved=1

and e820 said that range is RAM.

We should check if we can use that reading out. BIOS could just program wrong 
address there.

-v2: Mike pointed out one path need one release.

Reported-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
Signed-off-by:Yinghai Lu <yinghai@xxxxxxxxxx>
Acked-by: Mike Waychison <mikew@xxxxxxxxxx>

---
 drivers/watchdog/sp5100_tco.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

Index: linux-2.6/drivers/watchdog/sp5100_tco.c
===================================================================
--- linux-2.6.orig/drivers/watchdog/sp5100_tco.c
+++ linux-2.6/drivers/watchdog/sp5100_tco.c
@@ -42,6 +42,7 @@
 #define PFX TCO_MODULE_NAME ": "
/* internal variables */
+static u32 tcobase_phys;
 static void __iomem *tcobase;
 static unsigned int pm_iobase;
 static DEFINE_SPINLOCK(tco_lock);      /* Guards the hardware */
@@ -305,10 +306,16 @@ static unsigned char __devinit sp5100_tc
        /* Low three bits of BASE0 are reserved. */
        val = val << 8 | (inb(SP5100_IO_PM_DATA_REG) & 0xf8);
+ if (request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE, "SP5100 TCO")) {
+               printk(KERN_ERR PFX "mmio address 0x%04x already in use\n", 
val);
+               goto unreg_region;
+       }
+       tcobase_phys = val;
+
        tcobase = ioremap(val, SP5100_WDT_MEM_MAP_SIZE);
        if (tcobase == 0) {
                printk(KERN_ERR PFX "failed to get tcobase address\n");
-               goto unreg_region;
+               goto unreg_mem_region;
        }
/* Enable watchdog decode bit */
@@ -346,7 +353,8 @@ static unsigned char __devinit sp5100_tc
        /* Done */
        return 1;
- iounmap(tcobase);
+unreg_mem_region:
+       release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
 unreg_region:
        release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
 exit:
@@ -401,6 +409,7 @@ static int __devinit sp5100_tco_init(str
exit:
        iounmap(tcobase);
+       release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
        release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
        return ret;
 }
@@ -414,6 +423,7 @@ static void __devexit sp5100_tco_cleanup
        /* Deregister */
        misc_deregister(&sp5100_tco_miscdev);
        iounmap(tcobase);
+       release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
        release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
 }
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

<Prev in Thread] Current Thread [Next in Thread>