|
|
|
|
|
|
|
|
|
|
xen-devel
Re: [Xen-devel] Crash when reading /proc/kcore, kernel 2.6.32 xen/stable
On Fri, Feb 18, 2011 at 10:30:51AM +0700, Fajar A. Nugraha wrote:
> I'm using kernel 2.6.32 xen/stable-2.6.32.x from Jeremy's git tree.
> While testing zfs, I noticed that this kernel would crash every time
> /proc/kcore is read. Something like this is enough to reproduce it:
Yikes!
Interestingly enough, the 2.6.38-rc5 does not have this problem.
>
> # dd if=/proc/kcore of=/dev/null bs=1M count=1
> BUG: unable to handle kernel paging request at ffff9d5555555000
> IP: [<ffffffff81037ee0>] kern_addr_valid+0x44/0xcc
> PGD 0
> Oops: 0000 [#1] SMP
> last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map
> CPU 1
> Modules linked in: xen_netback blktap xen_blkback blkback_pagemap
> ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE
> iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state
> nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables
> autofs4 hidp rfcomm l2cap bluetooth rfkill lzfs zfs(P) zcommon(P)
> znvpair(P) zavl(P) zlib_deflate zunicode(P) spl lockd sunrpc 8021q
> garp bridge stp llc ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core
> ib_addr iscsi_tcp bnx2i cnic uio ipv6 cxgb3i cxgb3 mdio libiscsi_tcp
> libiscsi scsi_transport_iscsi video output sbs sbshc parport_pc lp
> parport ipmi_devintf bnx2 radeon snd_seq_dummy ttm drm_kms_helper drm
> i2c_algo_bit i2c_core ipmi_si ipmi_msghandler hpwdt snd_seq_oss
> snd_seq_midi_event serio_raw snd_seq snd_seq_device snd_pcm_oss
> snd_mixer_oss snd_pcm i5k_amb iTCO_wdt snd_timer i5000_edac
> iTCO_vendor_support edac_core snd shpchp soundcore snd_page_alloc
> pcspkr qla2xxx scsi_transport_fc scsi_tgt cciss uhci_hcd ohci_hcd
> ehci_hcd [last unloaded: freq_table]
> Pid: 8944, comm: dd Tainted: P 2.6.32.27-1.pv_ops.el5.fanxen
> #1 ProLiant BL460c G1
> RIP: e030:[<ffffffff81037ee0>] [<ffffffff81037ee0>] kern_addr_valid+0x44/0xcc
> RSP: e02b:ffff880038a1dc20 EFLAGS: 00010286
> RAX: ffff9d5555555000 RBX: ffff800000000000 RCX: ffffffff81918440
> RDX: ffff880000000000 RSI: 0000000000000000 RDI: 00000002afffd067
> RBP: ffff880038a1dc28 R08: ffff880038a1ddd8 R09: ffff880038a1de08
> R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000001000
> R13: ffff800000000000 R14: 0000000000002000 R15: 00000000000fe000
> FS: 00007f31849dd6e0(0000) GS:ffff880028055000(0000) knlGS:0000000000000000
> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: ffff9d5555555000 CR3: 0000000038ab3000 CR4: 0000000000002660
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process dd (pid: 8944, threadinfo ffff880038a1c000, task ffff880036b981c0)
> Stack:
> ffff8800327d44a8 ffff880038a1dec8 ffffffff81170afb ffff880038a1df48
> <0> 00007f31848dd000 0000000000002000 0000000000002000 0000000000000000
> <0> 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> Call Trace:
> [<ffffffff81170afb>] read_kcore+0x4bb/0x574
> [<ffffffff8100ee27>] ? xen_set_pte_at+0xd1/0xef
> [<ffffffff81167cdf>] proc_reg_read+0x76/0x90
> [<ffffffff81118e69>] vfs_read+0xad/0x107
> [<ffffffff8111991d>] sys_read+0x4c/0x70
> [<ffffffff81012db2>] system_call_fastpath+0x16/0x1b
> Code: f8 fd 0f 86 a6 00 00 00 48 c1 ef 24 81 e7 f8 0f 00 00 48 03 3d
> 9a be 64 00 48 83 3f 00 0f 84 8b 00 00 00 48 89 de e8 24 fa ff ff <48>
> 83 38 00 48 89 c7 74 7a 48 89 de e8 d7 f9 ff ff 48 8b 38 48
> RIP [<ffffffff81037ee0>] kern_addr_valid+0x44/0xcc
> RSP <ffff880038a1dc20>
> CR2: ffff9d5555555000
> ---[ end trace 037fec8dd189bf20 ]---
> Kernel panic - not syncing: Fatal exception
> Pid: 8944, comm: dd Tainted: P D 2.6.32.27-1.pv_ops.el5.fanxen #1
> Call Trace:
> [<ffffffff810300ef>] ? gdb_regs_to_pt_regs+0x83/0xb6
> [<ffffffff81058b6a>] panic+0xa5/0x164
> [<ffffffff81430035>] ? agp_amd64_probe+0x570/0x584
> [<ffffffff8100f2b1>] ? xen_force_evtchn_callback+0xd/0xf
> [<ffffffff8100fa32>] ? check_events+0x12/0x20
> [<ffffffff810300ef>] ? gdb_regs_to_pt_regs+0x83/0xb6
> [<ffffffff81058837>] ? print_oops_end_marker+0x23/0x25
> [<ffffffff810300ef>] ? gdb_regs_to_pt_regs+0x83/0xb6
> [<ffffffff8143eb66>] oops_end+0xb7/0xc7
> [<ffffffff810387ac>] no_context+0x205/0x214
> [<ffffffff810300ef>] ? gdb_regs_to_pt_regs+0x83/0xb6
> [<ffffffff810f1372>] ? handle_mm_fault+0x312/0x776
> [<ffffffff810389ff>] __bad_area_nosemaphore+0x183/0x1a6
> [<ffffffff81038aac>] bad_area_nosemaphore+0x13/0x15
> [<ffffffff8143ffdd>] do_page_fault+0x147/0x26c
> [<ffffffff8143e075>] page_fault+0x25/0x30
> [<ffffffff81037ee0>] ? kern_addr_valid+0x44/0xcc
> [<ffffffff81170afb>] read_kcore+0x4bb/0x574
> [<ffffffff8100ee27>] ? xen_set_pte_at+0xd1/0xef
> [<ffffffff81167cdf>] proc_reg_read+0x76/0x90
> [<ffffffff81118e69>] vfs_read+0xad/0x107
> [<ffffffff8111991d>] sys_read+0x4c/0x70
> [<ffffffff81012db2>] system_call_fastpath+0x16/0x1b
> (XEN) Debugging connection not set up.
> (XEN) Domain 0 crashed: rebooting machine in 5 seconds.
>
> Is this a known issue?
Nope. First tiem I see it.
>
> --
> Fajar
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
|
|