On Fri, 2011-01-07 at 06:40 +0000, Joe Jin wrote:
> Hi,
>
> when do migration test, we hit the panic as below:
> <1>BUG: unable to handle kernel paging request at 0000000b819fdb98
> <1>IP: [<ffffffff812a588f>] notify_remote_via_irq+0x13/0x34
> <4>PGD 94b10067 PUD 0
> <0>Oops: 0000 [#1] SMP
> <0>last sysfs file: /sys/class/misc/autofs/dev
> <4>CPU 3
> <4>Modules linked in: autofs4(U) hidp(U) nfs(U) fscache(U) nfs_acl(U)
> auth_rpcgss(U) rfcomm(U) l2cap(U) bluetooth(U) rfkill(U) lockd(U) sunrpc(U)
> nf_conntrack_netbios_ns(U) ipt_REJECT(U) nf_conntrack_ipv4(U)
> nf_defrag_ipv4(U) xt_state(U) nf_conntrack(U) iptable_filter(U) ip_tables(U)
> ip6t_REJECT(U) xt_tcpudp(U) ip6table_filter(U) ip6_tables(U) x_tables(U)
> ipv6(U) parport_pc(U) lp(U) parport(U) snd_seq_dummy(U) snd_seq_oss(U)
> snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U) snd_pcm_oss(U)
> snd_mixer_oss(U) snd_pcm(U) snd_timer(U) snd(U) soundcore(U)
> snd_page_alloc(U) joydev(U) xen_netfront(U) pcspkr(U) xen_blkfront(U)
> uhci_hcd(U) ohci_hcd(U) ehci_hcd(U)
> Pid: 18, comm: events/3 Not tainted 2.6.32
> RIP: e030:[<ffffffff812a588f>] [<ffffffff812a588f>]
> ify_remote_via_irq+0x13/0x34
> RSP: e02b:ffff8800e7bf7bd0 EFLAGS: 00010202
> RAX: ffff8800e61c8000 RBX: ffff8800e62f82c0 RCX: 0000000000000000
> RDX: 00000000000001e3 RSI: ffff8800e7bf7c68 RDI: 0000000bfffffff4
> RBP: ffff8800e7bf7be0 R08: 00000000000001e2 R09: ffff8800e62f82c0
> R10: 0000000000000001 R11: ffff8800e6386110 R12: 0000000000000000
> R13: 0000000000000007 R14: ffff8800e62f82e0 R15: 0000000000000240
> FS: 00007f409d3906e0(0000) GS:ffff8800028b8000(0000)
> GS:0000000000000000
> CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
> CR2: 0000000b819fdb98 CR3: 000000003ee3b000 CR4: 0000000000002660
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process events/3 (pid: 18, threadinfo ffff8800e7bf6000, task
> f8800e7bf4540)
> Stack:
> 0000000000000200 ffff8800e61c8000 ffff8800e7bf7c00 ffffffff812712c9
> <0> ffffffff8100ea5f ffffffff81438d80 ffff8800e7bf7cd0 ffffffff812714ee
> <0> 0000000000000000 ffffffff81270568 000000000000e030 0000000000010202
> Call Trace:
> [<ffffffff812712c9>] xenfb_send_event+0x5c/0x5e
> [<ffffffff8100ea5f>] ? xen_restore_fl_direct_end+0x0/0x1
> [<ffffffff81438d80>] ? _spin_unlock_irqrestore+0x16/0x18
> [<ffffffff812714ee>] xenfb_refresh+0x1b1/0x1d7
> [<ffffffff81270568>] ? sys_imageblit+0x1ac/0x458
> [<ffffffff81271786>] xenfb_imageblit+0x2f/0x34
> [<ffffffff8126a3e5>] soft_cursor+0x1b5/0x1c8
> [<ffffffff8126a137>] bit_cursor+0x4b6/0x4d7
> [<ffffffff8100ea5f>] ? xen_restore_fl_direct_end+0x0/0x1
> [<ffffffff81438d80>] ? _spin_unlock_irqrestore+0x16/0x18
> [<ffffffff81269c81>] ? bit_cursor+0x0/0x4d7
> [<ffffffff812656b7>] fb_flashcursor+0xff/0x111
> [<ffffffff812655b8>] ? fb_flashcursor+0x0/0x111
> [<ffffffff81071812>] worker_thread+0x14d/0x1ed
> [<ffffffff81075a8c>] ? autoremove_wake_function+0x0/0x3d
> [<ffffffff81438d80>] ? _spin_unlock_irqrestore+0x16/0x18
> [<ffffffff810716c5>] ? worker_thread+0x0/0x1ed
> [<ffffffff810756e3>] kthread+0x6e/0x76
> [<ffffffff81012dea>] child_rip+0xa/0x20
> [<ffffffff81011fd1>] ? int_ret_from_sys_call+0x7/0x1b
> [<ffffffff8101275d>] ? retint_restore_args+0x5/0x6
> [<ffffffff81012de0>] ? child_rip+0x0/0x20
> Code: 6b ff 0c 8b 87 a4 db 9f 81 66 85 c0 74 08 0f b7 f8 e8 3b ff ff ff c9
> c3 55 48 89 e5 48 83 ec 10 0f 1f 44 00 00 89 ff 48 6b ff 0c <8b> 87 a4 db 9f
> 81 66 85 c0 74 14 48 8d 75 f0 0f b7 c0 bf 04 00
> RIP [<ffffffff812a588f>] notify_remote_via_irq+0x13/0x34
> RSP <ffff8800e7bf7bd0>
> CR2: 0000000b819fdb98
> ---[ end trace 098b4b74827595d0 ]---
>
> The root cause of the panic is try to refresh xenfb when suspend/resume.
perhaps work "... between the resume and reconnecting to the backend."
into that sentence somewhere.
> Clear refresh flag of xenfb before disconnect backend would fix this issue.
s/refresh/update_wanted/
> Also below patch will fixed mem leak when connect to xenfb backend failed.
>
> Please review and comment.
>
> Signed-off-by: Joe Jin <joe.jin@xxxxxxxxxx>
> Tested-by: Gurudas Pai <gurudas.pai@xxxxxxxxxx>
Looks good. But please separate the mem leak fix into its own patch, it
has nothing to do with this crash (hiding a 1 line fix for a crash in
amongst 30 lines of something else does nobody any favours, as the
length of this thread testifies).
You can add
Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
to the xenfb_disconnect_backend change once you've split it out.
I have some further comments on the xenfb_connect_backend change below.
> Cc: Jeremy Fitzhardinge <jeremy@xxxxxxxx>
> Cc: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
> Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
>
> ---
> xen-fbfront.c | 21 +++++++++++++--------
> 1 file changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
> index dc72563..6f23797 100644
> --- a/drivers/video/xen-fbfront.c
> +++ b/drivers/video/xen-fbfront.c
> @@ -561,26 +561,24 @@ static void xenfb_init_shared_page(struct xenfb_info
> *info,
> static int xenfb_connect_backend(struct xenbus_device *dev,
> struct xenfb_info *info)
> {
> - int ret, evtchn;
> + int ret, evtchn, irq;
> struct xenbus_transaction xbt;
>
> ret = xenbus_alloc_evtchn(dev, &evtchn);
> if (ret)
> return ret;
> - ret = bind_evtchn_to_irqhandler(evtchn, xenfb_event_handler,
> + irq = bind_evtchn_to_irqhandler(evtchn, xenfb_event_handler,
> 0, dev->devicetype, info);
> - if (ret < 0) {
> + if (irq < 0) {
> xenbus_free_evtchn(dev, evtchn);
> xenbus_dev_fatal(dev, ret, "bind_evtchn_to_irqhandler");
> - return ret;
> + return irq;
> }
> - info->irq = ret;
> -
> again:
> ret = xenbus_transaction_start(&xbt);
> if (ret) {
> xenbus_dev_fatal(dev, ret, "starting transaction");
> - return ret;
> + goto unbind_irq;
> }
> ret = xenbus_printf(xbt, dev->nodename, "page-ref", "%lu",
> virt_to_mfn(info->page));
> @@ -602,20 +600,27 @@ static int xenfb_connect_backend(struct xenbus_device
> *dev,
> if (ret == -EAGAIN)
> goto again;
> xenbus_dev_fatal(dev, ret, "completing transaction");
> - return ret;
> + goto unbind_irq;
> }
>
> xenbus_switch_state(dev, XenbusStateInitialised);
> + info->irq = irq;
> return 0;
>
> error_xenbus:
> xenbus_transaction_end(xbt, 1);
> xenbus_dev_fatal(dev, ret, "writing xenstore");
> + unbind_irq:
> + printk(KERN_ERR "xenfb_connect_backend failed!\n");
If anything this should be xenbus_dev_BLAH(). However all the places
which "goto unbind_irq" already include a xenbus_dev_fatal with more
specific context information and so does the case which falls through
from error_xenbus so I think this new message is redundant.
> + unbind_from_irqhandler(irq, info);
> + xenbus_free_evtchn(dev, evtchn);
unbind_from_irqhandler will also close the event channel for you so the
call to xenbus_free_evtchn is not necessary here.
Thanks,
Ian.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home