[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.5.1 20101130 (Red Hat 4.5.1-6) (GCC) ) #1 SMP Thu Dec 2 16:56:26 UTC 2010 [ 0.000000] Command line: ro root=UUID=23bea158-7d3e-4112-82ae-4f394e0b8b56 3 pci=nomsi [ 0.000000] xen_release_chunk: looking at area pfn e0000-f423c: 82492 pages freed [ 0.000000] released 82492 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000df66d800 (usable) [ 0.000000] Xen: 00000000df66d800 - 00000000e0000000 (reserved) [ 0.000000] Xen: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] Xen: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] Xen: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] Xen: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 000000013423c000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: 0U990C/Inspiron 1525 , BIOS A17 10/27/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x13423c max_arch_pfn = 0x400000000 [ 0.000000] last_pfn = 0xdf66d max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 05fff000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000df66d000 [ 0.000000] 0000000000 - 00df66d000 page 4k [ 0.000000] kernel direct mapping tables up to df66d000 @ 58fe000-5fff000 [ 0.000000] init_memory_mapping: 0000000100000000-000000013423c000 [ 0.000000] 0100000000 - 013423c000 page 4k [ 0.000000] kernel direct mapping tables up to 13423c000 @ decc5000-df66d000 [ 0.000000] RAMDISK: 02ac8000 - 04ea2000 [ 0.000000] ACPI: RSDP 00000000000fbc60 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000df66f200 00064 (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: FACP 00000000df66f09c 000F4 (v04 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: DSDT 00000000df66f800 05477 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS 00000000df67e000 00040 [ 0.000000] ACPI: HPET 00000000df66f300 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC 00000000df66f400 00068 (v01 DELL M08 27D90A1B ASL 00000047) [ 0.000000] ACPI: MCFG 00000000df66f3c0 0003E (v16 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: SLIC 00000000df66f49c 00176 (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: OSFR 00000000df66ea00 0002C (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: BOOT 00000000df66efc0 00028 (v01 DELL M08 27D90A1B ASL 00000061) [ 0.000000] ACPI: SSDT 00000000df66d97e 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000013423c000 [ 0.000000] Initmem setup node 0 0000000000000000-000000013423c000 [ 0.000000] NODE_DATA [00000000df658800 - 00000000df66d7ff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0013423c [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000df66d [ 0.000000] 0: 0x00100000 -> 0x0013423c [ 0.000000] On node 0 totalpages: 1128504 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 896677 pages, LIFO batch:31 [ 0.000000] Normal zone: 2920 pages used for memmap [ 0.000000] Normal zone: 210644 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 255, address 0xfec00000, GSI 0-255 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 272 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000df66d000 - 00000000df66e000 [ 0.000000] PM: Registered nosave memory: 00000000df66e000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000 [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000 [ 0.000000] PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.1 (preserve-AD) [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 476 pages/cpu @ffff8800dee7d000 s1920512 r8192 d20992 u1949696 [ 0.000000] pcpu-alloc: s1920512 r8192 d20992 u1949696 alloc=476*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1111242 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: ro root=UUID=23bea158-7d3e-4112-82ae-4f394e0b8b56 3 pci=nomsi [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Placing 64MB software IO TLB between ffff8800d6200000 - ffff8800da200000 [ 0.000000] software IO TLB at phys 0xd6200000 - 0xda200000 [ 0.000000] Memory: 3446248k/5048560k available (4849k kernel code, 534544k absent, 1067768k reserved, 6795k data, 2744k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU lockdep checking is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 [ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=0 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen_map_pirq_gsi: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6367 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] allocated 45875200 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 11 of 11 active objects replaced [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 2394.062 MHz processor. [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.12 BogoMIPS (lpj=2394062) [ 0.000999] pid_max: default: 32768 minimum: 301 [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.003293] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.008310] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010522] Mount-cache hash table entries: 256 [ 0.012437] Initializing cgroup subsys ns [ 0.012457] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.012469] Initializing cgroup subsys cpuacct [ 0.012501] Initializing cgroup subsys memory [ 0.012651] Initializing cgroup subsys devices [ 0.012661] Initializing cgroup subsys freezer [ 0.012669] Initializing cgroup subsys net_cls [ 0.012677] Initializing cgroup subsys blkio [ 0.012944] CPU: Physical Processor ID: 0 [ 0.012950] CPU: Processor Core ID: 0 [ 0.012958] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only. [ 0.013701] ACPI: Core revision 20101013 [ 0.040046] ftrace: allocating 24696 entries in 97 pages [ 0.045474] NMI watchdog failed to create perf event on cpu0: fffffffffffffffe [ 0.046200] installing Xen timer for CPU 1 [ 0.046316] lockdep: fixing up alternatives. [ 0.046692] NMI watchdog failed to create perf event on cpu1: fffffffffffffffe [ 0.046703] Brought up 2 CPUs [ 0.046707] sizeof(vma)=184 bytes [ 0.046710] sizeof(page)=56 bytes [ 0.046712] sizeof(inode)=1088 bytes [ 0.046715] sizeof(dentry)=264 bytes [ 0.046717] sizeof(ext3inode)=1552 bytes [ 0.046719] sizeof(ext4inode)=1912 bytes [ 0.046722] sizeof(buffer_head)=104 bytes [ 0.046724] sizeof(skbuff)=240 bytes [ 0.046726] sizeof(task_struct)=9104 bytes [ 0.047720] devtmpfs: initialized [ 0.057506] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.057541] Grant table initialized [ 0.057590] Time: 20:38:44 Date: 12/03/10 [ 0.057999] NET: Registered protocol family 16 [ 0.060248] ACPI: bus type pci registered [ 0.060864] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.060875] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.079750] PCI: Using configuration type 1 for base access [ 0.091103] bio: create slab at 0 [ 0.094391] ACPI: EC: Look up EC in DSDT [ 0.115142] ACPI: SSDT 00000000df66e4b4 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.115999] ACPI: Dynamic OEM Table Load: [ 0.115999] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.116306] ACPI: SSDT 00000000df66de4a 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.116999] ACPI: Dynamic OEM Table Load: [ 0.116999] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.117113] ACPI: SSDT 00000000df66e77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.117999] ACPI: Dynamic OEM Table Load: [ 0.117999] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.118068] ACPI: SSDT 00000000df66e42f 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.118999] ACPI: Dynamic OEM Table Load: [ 0.118999] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.118999] ACPI: Interpreter enabled [ 0.118999] ACPI: (supports S0 S3 S4 S5) [ 0.118999] ACPI: Using IOAPIC for interrupt routing [ 0.252999] ACPI: No dock devices found. [ 0.252999] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.279999] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.329999] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.329999] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xf7ffffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfc000000-0xfebfffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfec10000-0xfecfffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfed1c000-0xfed1ffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfed90000-0xfed9ffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff] [ 0.329999] pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff] [ 0.329999] pci_root PNP0A03:00: address space collision: host bridge window [mem 0x120000000-0x317ffffff] conflicts with System RAM [mem 0x100000000-0x13423bfff] [ 0.329999] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600 [ 0.330103] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300 [ 0.330185] pci 0000:00:02.0: reg 10: [mem 0xfea00000-0xfeafffff 64bit] [ 0.330233] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.330265] pci 0000:00:02.0: reg 20: [io 0xeff8-0xefff] [ 0.330490] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380 [ 0.330559] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfebfffff 64bit] [ 0.330999] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03 [ 0.330999] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] [ 0.331056] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03 [ 0.331247] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] [ 0.331458] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 [ 0.331536] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] [ 0.331855] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.331869] pci 0000:00:1a.7: PME# disabled [ 0.331972] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 [ 0.331999] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit] [ 0.332030] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.332043] pci 0000:00:1b.0: PME# disabled [ 0.332146] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 [ 0.332453] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.332466] pci 0000:00:1c.0: PME# disabled [ 0.332578] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604 [ 0.332883] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.332896] pci 0000:00:1c.1: PME# disabled [ 0.332999] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604 [ 0.333059] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.333073] pci 0000:00:1c.4: PME# disabled [ 0.333207] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03 [ 0.333400] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] [ 0.333555] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03 [ 0.333746] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] [ 0.333900] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03 [ 0.333999] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] [ 0.334105] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03 [ 0.334184] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] [ 0.334501] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.334515] pci 0000:00:1d.7: PME# disabled [ 0.334597] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.334903] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601 [ 0.334999] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.334999] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO [ 0.334999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.334999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) [ 0.334999] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.335089] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101 [ 0.335143] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.335180] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.335218] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.335256] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.335293] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] [ 0.335507] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106 [ 0.335595] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] [ 0.335632] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] [ 0.335670] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] [ 0.335707] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb] [ 0.335745] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] [ 0.335783] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb800-0xfe9fbfff] [ 0.335956] pci 0000:00:1f.2: PME# supported from D3hot [ 0.335969] pci 0000:00:1f.2: PME# disabled [ 0.335999] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 [ 0.335999] pci 0000:00:1f.3: reg 10: [mem 0xfe9fb700-0xfe9fb7ff] [ 0.335999] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] [ 0.336324] pci 0000:09:00.0: [11ab:4354] type 0 class 0x000200 [ 0.336408] pci 0000:09:00.0: reg 10: [mem 0xfe8fc000-0xfe8fffff 64bit] [ 0.336452] pci 0000:09:00.0: reg 18: [io 0xde00-0xdeff] [ 0.336760] pci 0000:09:00.0: supports D1 D2 [ 0.336763] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.336778] pci 0000:09:00.0: PME# disabled [ 0.336999] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.336999] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.336999] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.336999] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.336999] pci 0000:0b:00.0: [8086:4229] type 0 class 0x000280 [ 0.336999] pci 0000:0b:00.0: reg 10: [mem 0xfe7fe000-0xfe7fffff 64bit] [ 0.337067] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.337106] pci 0000:0b:00.0: PME# disabled [ 0.337449] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] [ 0.337467] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.337480] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.337504] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.337717] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] [ 0.337734] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.337747] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe6fffff] [ 0.337770] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.337999] pci 0000:02:09.0: [1180:0832] type 0 class 0x000c00 [ 0.337999] pci 0000:02:09.0: reg 10: [mem 0xfe3ff800-0xfe3fffff] [ 0.338031] pci 0000:02:09.0: supports D1 D2 [ 0.338034] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338085] pci 0000:02:09.0: PME# disabled [ 0.338160] pci 0000:02:09.1: [1180:0822] type 0 class 0x000805 [ 0.338229] pci 0000:02:09.1: reg 10: [mem 0xfe3ff500-0xfe3ff5ff] [ 0.338532] pci 0000:02:09.1: supports D1 D2 [ 0.338535] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338550] pci 0000:02:09.1: PME# disabled [ 0.338624] pci 0000:02:09.2: [1180:0592] type 0 class 0x000880 [ 0.338694] pci 0000:02:09.2: reg 10: [mem 0xfe3ff600-0xfe3ff6ff] [ 0.338995] pci 0000:02:09.2: supports D1 D2 [ 0.338998] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.338999] pci 0000:02:09.2: PME# disabled [ 0.339070] pci 0000:02:09.3: [1180:0852] type 0 class 0x000880 [ 0.339140] pci 0000:02:09.3: reg 10: [mem 0xfe3ff700-0xfe3ff7ff] [ 0.339441] pci 0000:02:09.3: supports D1 D2 [ 0.339444] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.339459] pci 0000:02:09.3: PME# disabled [ 0.339654] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.339672] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.339685] pci 0000:00:1e.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.339709] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.339714] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.339718] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.339723] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.339727] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.339735] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) [ 0.339739] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode) [ 0.339744] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff] (subtractive decode) [ 0.339758] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff] (subtractive decode) [ 0.339762] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff] (subtractive decode) [ 0.339767] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode) [ 0.339771] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode) [ 0.339776] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode) [ 0.339876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.344999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.344999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.345616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.345999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.375866] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.376592] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.377418] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 0.377999] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.378588] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.378999] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.379588] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.379999] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.380062] HEST: Table is not found! [ 0.380149] xen_balloon: Initialising balloon driver. [ 0.380305] last_pfn = 0x13423c max_arch_pfn = 0x400000000 [ 0.386887] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.386999] vgaarb: loaded [ 0.387816] SCSI subsystem initialized [ 0.388214] libata version 3.00 loaded. [ 0.388719] usbcore: registered new interface driver usbfs [ 0.388860] usbcore: registered new interface driver hub [ 0.389098] usbcore: registered new device driver usb [ 0.389507] PCI: Using ACPI for IRQ routing [ 0.389507] PCI: pci_cache_line_size set to 64 bytes [ 0.389861] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.389876] reserve RAM buffer: 00000000df66d800 - 00000000dfffffff [ 0.389884] reserve RAM buffer: 000000013423c000 - 0000000137ffffff [ 0.390943] NetLabel: Initializing [ 0.390949] NetLabel: domain hash size = 128 [ 0.390954] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.390999] NetLabel: unlabeled traffic allowed by default [ 0.391982] Switching to clocksource xen [ 0.513144] pnp: PnP ACPI init [ 0.513315] ACPI: bus type pnp registered [ 0.564054] pnp 00:00: [bus 00-ff] [ 0.564054] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.564054] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.575063] pnp 00:00: [io 0x0d00-0xffff window] [ 0.575068] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.575072] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.575077] pnp 00:00: [mem 0xe0000000-0xf7ffffff window] [ 0.575081] pnp 00:00: [mem 0xfc000000-0xfebfffff window] [ 0.575085] pnp 00:00: [mem 0xfec10000-0xfecfffff window] [ 0.575089] pnp 00:00: [mem 0xfed1c000-0xfed1ffff window] [ 0.575093] pnp 00:00: [mem 0xfed90000-0xfed9ffff window] [ 0.575097] pnp 00:00: [mem 0xfeda7000-0xfedfffff window] [ 0.575101] pnp 00:00: [mem 0xfee10000-0xff9fffff window] [ 0.575106] pnp 00:00: [mem 0xffc00000-0xffdfffff window] [ 0.575110] pnp 00:00: [mem 0x120000000-0x317ffffff window] [ 0.575776] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.575877] pnp 00:01: [io 0x004e-0x004f] [ 0.575882] pnp 00:01: [io 0x0068-0x006f] [ 0.575886] pnp 00:01: [mem 0xff800000-0xff8fffff] [ 0.575890] pnp 00:01: [mem 0xffc00000-0xffcfffff] [ 0.576355] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.576498] xen: registering gsi 12 triggering 1 polarity 0 [ 0.576503] xen_map_pirq_gsi: returning irq 12 for gsi 12 [ 0.576510] xen: --> irq=12 [ 0.576527] pnp 00:02: [irq 12] [ 0.576800] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.576939] pnp 00:03: [io 0x0060] [ 0.576943] pnp 00:03: [io 0x0064] [ 0.576947] pnp 00:03: [io 0x0062] [ 0.576950] pnp 00:03: [io 0x0066] [ 0.576954] xen: registering gsi 1 triggering 1 polarity 0 [ 0.576958] xen_map_pirq_gsi: returning irq 1 for gsi 1 [ 0.576965] xen: --> irq=1 [ 0.576972] pnp 00:03: [irq 1] [ 0.577267] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.577413] pnp 00:04: [io 0x0070-0x0071] [ 0.577416] xen: registering gsi 8 triggering 1 polarity 0 [ 0.577420] xen_map_pirq_gsi: returning irq 8 for gsi 8 [ 0.577427] xen: --> irq=8 [ 0.577435] pnp 00:04: [irq 8] [ 0.577447] pnp 00:04: [io 0x0072-0x0077] [ 0.577710] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.577884] pnp 00:05: [io 0x0061] [ 0.577888] pnp 00:05: [io 0x0063] [ 0.577892] pnp 00:05: [io 0x0065] [ 0.577895] pnp 00:05: [io 0x0067] [ 0.578188] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.578332] pnp 00:06: [io 0x0c80-0x0cff] [ 0.578836] pnp 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.579009] pnp 00:07: [dma 4] [ 0.579013] pnp 00:07: [io 0x0000-0x000f] [ 0.579016] pnp 00:07: [io 0x0080-0x0085] [ 0.579020] pnp 00:07: [io 0x0087-0x008f] [ 0.579023] pnp 00:07: [io 0x00c0-0x00df] [ 0.579026] pnp 00:07: [io 0x0010-0x001f] [ 0.579030] pnp 00:07: [io 0x0090-0x0091] [ 0.579030] pnp 00:07: [io 0x0093-0x009f] [ 0.579311] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.579453] pnp 00:08: [io 0x00f0-0x00ff] [ 0.579457] xen: registering gsi 13 triggering 1 polarity 0 [ 0.579461] xen_map_pirq_gsi: returning irq 13 for gsi 13 [ 0.579468] xen: --> irq=13 [ 0.579476] pnp 00:08: [irq 13] [ 0.579772] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.580167] pnp 00:09: [mem 0xfed00000-0xfed003ff] [ 0.580745] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.581487] pnp 00:0a: [io 0x0900-0x097f] [ 0.581487] pnp 00:0a: [io 0x0092] [ 0.581487] pnp 00:0a: [io 0x00b2-0x00b3] [ 0.581487] pnp 00:0a: [io 0x0020-0x0021] [ 0.581487] pnp 00:0a: [io 0x00a0-0x00a1] [ 0.581487] pnp 00:0a: [irq 0 disabled] [ 0.581487] pnp 00:0a: [io 0x04d0-0x04d1] [ 0.582587] pnp 00:0a: [io 0x1000-0x1005] [ 0.582591] pnp 00:0a: [io 0x1008-0x100f] [ 0.582738] pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.582750] pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.583328] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.583471] pnp 00:0b: [io 0xf400-0xf4fe] [ 0.583475] pnp 00:0b: [io 0x0086] [ 0.583479] pnp 00:0b: [io 0x1006-0x1007] [ 0.583483] pnp 00:0b: [io 0x100a-0x1059] [ 0.583486] pnp 00:0b: [io 0x1060-0x107f] [ 0.583490] pnp 00:0b: [io 0x1080-0x10bf] [ 0.583494] pnp 00:0b: [io 0x10c0-0x10df] [ 0.583497] pnp 00:0b: [io 0x1010-0x102f] [ 0.583501] pnp 00:0b: [io 0x0809] [ 0.583647] pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.583659] pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.583669] pnp 00:0b: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.583680] pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] [ 0.584286] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.661805] pnp 00:0c: [mem 0x00000000-0x0009efff] [ 0.661805] pnp 00:0c: [mem 0x0009f000-0x0009ffff] [ 0.661805] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.661805] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.661805] pnp 00:0c: [mem 0x00100000-0xdf66d7ff] [ 0.661805] pnp 00:0c: [mem 0xdf66d800-0xdf6fffff] [ 0.661805] pnp 00:0c: [mem 0xdf700000-0xdf7fffff] [ 0.661805] pnp 00:0c: [mem 0xdf700000-0xdfefffff] [ 0.661805] pnp 00:0c: [mem 0xffe00000-0xffffffff] [ 0.661805] pnp 00:0c: [mem 0xffa00000-0xffbfffff] [ 0.661805] pnp 00:0c: [mem 0xfec00000-0xfec0ffff] [ 0.661805] pnp 00:0c: [mem 0xfee00000-0xfee0ffff] [ 0.661805] pnp 00:0c: [mem 0xfed20000-0xfed8ffff] [ 0.666782] pnp 00:0c: [mem 0xfeda0000-0xfeda3fff] [ 0.666786] pnp 00:0c: [mem 0xfeda4000-0xfeda4fff] [ 0.666790] pnp 00:0c: [mem 0xfeda5000-0xfeda5fff] [ 0.666794] pnp 00:0c: [mem 0xfeda6000-0xfeda6fff] [ 0.666798] pnp 00:0c: [mem 0xfed18000-0xfed1bfff] [ 0.666802] pnp 00:0c: [mem 0xf8000000-0xfbffffff] [ 0.667567] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.668287] pnp: PnP ACPI: found 13 devices [ 0.668295] ACPI: ACPI bus type pnp unregistered [ 0.668353] system 00:01: [mem 0xff800000-0xff8fffff] has been reserved [ 0.668365] system 00:01: [mem 0xffc00000-0xffcfffff] has been reserved [ 0.668418] system 00:06: [io 0x0c80-0x0cff] could not be reserved [ 0.668460] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.668510] system 00:0a: [io 0x0900-0x097f] has been reserved [ 0.668521] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 0.668559] system 00:0b: [io 0xf400-0xf4fe] has been reserved [ 0.668570] system 00:0b: [io 0x1080-0x10bf] has been reserved [ 0.668581] system 00:0b: [io 0x10c0-0x10df] has been reserved [ 0.668591] system 00:0b: [io 0x0809] has been reserved [ 0.668654] system 00:0c: [mem 0x00000000-0x0009efff] could not be reserved [ 0.668672] system 00:0c: [mem 0x0009f000-0x0009ffff] could not be reserved [ 0.668689] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.668706] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.668723] system 00:0c: [mem 0x00100000-0xdf66d7ff] could not be reserved [ 0.668735] system 00:0c: [mem 0xdf66d800-0xdf6fffff] has been reserved [ 0.668745] system 00:0c: [mem 0xdf700000-0xdf7fffff] has been reserved [ 0.668762] system 00:0c: [mem 0xdf700000-0xdfefffff] could not be reserved [ 0.668773] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved [ 0.668784] system 00:0c: [mem 0xffa00000-0xffbfffff] has been reserved [ 0.668801] system 00:0c: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 0.668812] system 00:0c: [mem 0xfee00000-0xfee0ffff] has been reserved [ 0.668823] system 00:0c: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.668833] system 00:0c: [mem 0xfeda0000-0xfeda3fff] has been reserved [ 0.668844] system 00:0c: [mem 0xfeda4000-0xfeda4fff] has been reserved [ 0.668855] system 00:0c: [mem 0xfeda5000-0xfeda5fff] has been reserved [ 0.668866] system 00:0c: [mem 0xfeda6000-0xfeda6fff] has been reserved [ 0.668877] system 00:0c: [mem 0xfed18000-0xfed1bfff] has been reserved [ 0.668887] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.694225] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.694610] pci 0000:00:1c.0: BAR 15: assigned [mem 0xff600000-0xff7fffff 64bit pref] [ 0.694636] pci 0000:00:1c.1: BAR 15: assigned [mem 0xff400000-0xff5fffff 64bit pref] [ 0.694649] pci 0000:00:1c.1: BAR 13: assigned [io 0xb000-0xbfff] [ 0.694660] pci 0000:00:1c.0: PCI bridge to [bus 09-09] [ 0.694672] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 0.694694] pci 0000:00:1c.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 0.694711] pci 0000:00:1c.0: bridge window [mem 0xff600000-0xff7fffff 64bit pref] [ 0.694740] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] [ 0.694751] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff] [ 0.694773] pci 0000:00:1c.1: bridge window [mem 0xfe700000-0xfe7fffff] [ 0.694790] pci 0000:00:1c.1: bridge window [mem 0xff400000-0xff5fffff 64bit pref] [ 0.694818] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] [ 0.694830] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.694851] pci 0000:00:1c.4: bridge window [mem 0xfe400000-0xfe6fffff] [ 0.694868] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.694897] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 0.694903] pci 0000:00:1e.0: bridge window [io disabled] [ 0.694925] pci 0000:00:1e.0: bridge window [mem 0xfe300000-0xfe3fffff] [ 0.694941] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.694992] xen: registering gsi 16 triggering 0 polarity 1 [ 0.695042] xen: --> irq=16 [ 0.695052] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.695072] pci 0000:00:1c.0: setting latency timer to 64 [ 0.695099] xen: registering gsi 17 triggering 0 polarity 1 [ 0.695122] xen: --> irq=17 [ 0.695127] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.695145] pci 0000:00:1c.1: setting latency timer to 64 [ 0.695171] xen: registering gsi 16 triggering 0 polarity 1 [ 0.695175] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 0.695182] xen: --> irq=16 [ 0.695185] Already setup the GSI :16 [ 0.695190] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.695208] pci 0000:00:1c.4: setting latency timer to 64 [ 0.695237] pci 0000:00:1e.0: setting latency timer to 64 [ 0.695246] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.695250] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.695253] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.695256] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.695260] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.695263] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.695266] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.695269] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.695273] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.695276] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.695279] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.695282] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff] [ 0.695286] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] [ 0.695289] pci_bus 0000:09: resource 1 [mem 0xfe800000-0xfe8fffff] [ 0.695293] pci_bus 0000:09: resource 2 [mem 0xff600000-0xff7fffff 64bit pref] [ 0.695296] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.695299] pci_bus 0000:0b: resource 1 [mem 0xfe700000-0xfe7fffff] [ 0.695303] pci_bus 0000:0b: resource 2 [mem 0xff400000-0xff5fffff 64bit pref] [ 0.695306] pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff] [ 0.695309] pci_bus 0000:0c: resource 1 [mem 0xfe400000-0xfe6fffff] [ 0.695313] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] [ 0.695316] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff] [ 0.695319] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.695322] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.695326] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.695329] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff] [ 0.695332] pci_bus 0000:02: resource 8 [mem 0xe0000000-0xf7ffffff] [ 0.695335] pci_bus 0000:02: resource 9 [mem 0xfc000000-0xfebfffff] [ 0.695339] pci_bus 0000:02: resource 10 [mem 0xfec10000-0xfecfffff] [ 0.695342] pci_bus 0000:02: resource 11 [mem 0xfed1c000-0xfed1ffff] [ 0.695345] pci_bus 0000:02: resource 12 [mem 0xfed90000-0xfed9ffff] [ 0.695348] pci_bus 0000:02: resource 13 [mem 0xfeda7000-0xfedfffff] [ 0.695352] pci_bus 0000:02: resource 14 [mem 0xfee10000-0xff9fffff] [ 0.695355] pci_bus 0000:02: resource 15 [mem 0xffc00000-0xffdfffff] [ 0.695620] NET: Registered protocol family 2 [ 0.696895] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.702432] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.708388] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) [ 0.711010] TCP: Hash tables configured (established 524288 bind 65536) [ 0.711010] TCP reno registered [ 0.715466] UDP hash table entries: 4096 (order: 7, 786432 bytes) [ 0.717423] UDP-Lite hash table entries: 4096 (order: 7, 786432 bytes) [ 0.719200] NET: Registered protocol family 1 [ 0.719302] pci 0000:00:02.0: Boot video device [ 0.720070] PCI: CLS 64 bytes, default 64 [ 0.720814] Trying to unpack rootfs image as initramfs... [ 1.119817] Freeing initrd memory: 36712k freed [ 1.218370] DMA-API: preallocated 32768 debug entries [ 1.218386] DMA-API: debugging enabled by kernel config [ 1.218628] Simple Boot Flag at 0x79 set to 0x1 [ 1.222512] audit: initializing netlink socket (disabled) [ 1.222603] type=2000 audit(1291408726.062:1): initialized [ 1.238278] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.265522] VFS: Disk quotas dquot_6.5.2 [ 1.266072] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.271813] msgmni has been set to 6802 [ 1.272678] SELinux: Registering netfilter hooks [ 1.274613] cryptomgr_test used greatest stack depth: 5448 bytes left [ 1.275406] alg: No test for stdrng (krng) [ 1.275771] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.275815] io scheduler noop registered [ 1.275822] io scheduler deadline registered [ 1.276284] io scheduler cfq registered (default) [ 1.276292] list_sort_test: start testing list_sort() [ 1.280781] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.281008] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.281008] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.284654] acpiphp: Slot [1] registered [ 1.285228] pci-stub: invalid id string "" [ 1.287390] ACPI: AC Adapter [AC] (on-line) [ 1.288364] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 1.289760] ACPI: Lid Switch [LID] [ 1.290137] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.290197] ACPI: Power Button [PBTN] [ 1.290648] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.290670] ACPI: Sleep Button [SBTN] [ 1.293175] ACPI: acpi_idle registered with cpuidle [ 1.294827] Marking TSC unstable due to TSC halts in idle [ 1.319147] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.319147] ACPI: Thermal Zone [THM] (47 C) [ 1.319147] ERST: Table is not found! [ 1.400177] hpet_acpi_add: no address or irqs in _CRS [ 1.400672] Non-volatile memory driver v1.3 [ 1.400679] Linux agpgart interface v0.103 [ 1.401141] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 1.402701] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.404490] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.411011] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.411818] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.421172] ACPI: Battery Slot [BAT0] (battery present) [ 1.439428] brd: module loaded [ 1.446285] loop: module loaded [ 1.447289] ahci 0000:00:1f.2: version 3.0 [ 1.447326] xen: registering gsi 17 triggering 0 polarity 1 [ 1.447344] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 1.447351] xen: --> irq=17 [ 1.447357] Already setup the GSI :17 [ 1.447363] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.447710] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 1.447720] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems [ 1.447740] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.453250] scsi0 : ahci [ 1.454595] scsi1 : ahci [ 1.455304] scsi2 : ahci [ 1.456260] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 17 [ 1.456260] ata2: DUMMY [ 1.456260] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 17 [ 1.457680] ata_piix 0000:00:1f.1: version 2.13 [ 1.457708] xen: registering gsi 16 triggering 0 polarity 1 [ 1.457712] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 1.457720] xen: --> irq=16 [ 1.457724] Already setup the GSI :16 [ 1.457731] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.457966] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.461571] scsi3 : ata_piix [ 1.462268] scsi4 : ata_piix [ 1.464011] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 1.464011] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 1.466684] ata5: port disabled. ignoring. [ 1.467029] Fixed MDIO Bus: probed [ 1.467683] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.467784] xen: registering gsi 22 triggering 0 polarity 1 [ 1.467816] xen: --> irq=22 [ 1.467825] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.467909] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.467918] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.469012] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.469498] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.473404] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 1.473528] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 1.483064] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.483383] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.483391] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.483399] usb usb1: Product: EHCI Host Controller [ 1.483405] usb usb1: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 ehci_hcd [ 1.483414] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.484917] hub 1-0:1.0: USB hub found [ 1.485040] hub 1-0:1.0: 4 ports detected [ 1.486129] xen: registering gsi 20 triggering 0 polarity 1 [ 1.486153] xen: --> irq=20 [ 1.486159] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.486232] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.486240] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.486697] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.487039] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.490952] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.491009] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 1.496054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.496233] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.496242] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.496250] usb usb2: Product: EHCI Host Controller [ 1.496256] usb usb2: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 ehci_hcd [ 1.496264] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.497266] hub 2-0:1.0: USB hub found [ 1.497322] hub 2-0:1.0: 6 ports detected [ 1.498293] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.498446] uhci_hcd: USB Universal Host Controller Interface driver [ 1.498758] xen: registering gsi 20 triggering 0 polarity 1 [ 1.498763] xen_map_pirq_gsi: returning irq 20 for gsi 20 [ 1.498770] xen: --> irq=20 [ 1.498773] Already setup the GSI :20 [ 1.498780] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.498818] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.498826] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.499273] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.499485] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 1.499854] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.499862] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.499870] usb usb3: Product: UHCI Host Controller [ 1.499876] usb usb3: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd [ 1.499885] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.500868] hub 3-0:1.0: USB hub found [ 1.500926] hub 3-0:1.0: 2 ports detected [ 1.501788] xen: registering gsi 21 triggering 0 polarity 1 [ 1.501812] xen: --> irq=21 [ 1.501819] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.501857] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.501865] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.502350] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.502645] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 1.502968] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.502977] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.502985] usb usb4: Product: UHCI Host Controller [ 1.502991] usb usb4: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd [ 1.503000] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.503918] hub 4-0:1.0: USB hub found [ 1.503974] hub 4-0:1.0: 2 ports detected [ 1.504830] xen: registering gsi 20 triggering 0 polarity 1 [ 1.504835] xen_map_pirq_gsi: returning irq 20 for gsi 20 [ 1.504842] xen: --> irq=20 [ 1.504846] Already setup the GSI :20 [ 1.504852] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.504889] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.504898] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.505401] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.505641] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 1.505952] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.505960] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.505968] usb usb5: Product: UHCI Host Controller [ 1.505973] usb usb5: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd [ 1.505982] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.506979] hub 5-0:1.0: USB hub found [ 1.507058] hub 5-0:1.0: 2 ports detected [ 1.508013] xen: registering gsi 21 triggering 0 polarity 1 [ 1.508017] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 1.508024] xen: --> irq=21 [ 1.508053] Already setup the GSI :21 [ 1.508060] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.508097] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.508106] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.508526] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.508750] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 1.509110] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.509118] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.509126] usb usb6: Product: UHCI Host Controller [ 1.509132] usb usb6: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd [ 1.509140] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.510075] hub 6-0:1.0: USB hub found [ 1.510142] hub 6-0:1.0: 2 ports detected [ 1.510954] xen: registering gsi 22 triggering 0 polarity 1 [ 1.510958] xen_map_pirq_gsi: returning irq 22 for gsi 22 [ 1.510965] xen: --> irq=22 [ 1.510969] Already setup the GSI :22 [ 1.510975] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.511037] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.511045] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.511472] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.511709] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 1.512054] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.512062] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.512070] usb usb7: Product: UHCI Host Controller [ 1.512076] usb usb7: Manufacturer: Linux 2.6.37-0.rc4.git1.1.xendom0.fc15.x86_64 uhci_hcd [ 1.512084] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.512968] hub 7-0:1.0: USB hub found [ 1.513082] hub 7-0:1.0: 2 ports detected [ 1.514306] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.515012] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.541669] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.541669] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.542434] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.542708] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.542998] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.543959] mice: PS/2 mouse device common for all mice [ 1.545789] rtc_cmos 00:04: RTC can wake from S4 [ 1.546497] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.546589] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 1.547751] device-mapper: uevent: version 1.0.3 [ 1.548982] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@xxxxxxxxxx [ 1.550808] cpuidle: using governor ladder [ 1.552464] cpuidle: using governor menu [ 1.554429] usbcore: registered new interface driver usbhid [ 1.554436] usbhid: USB HID core driver [ 1.554755] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.559346] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.559463] TCP cubic registered [ 1.559469] Initializing XFRM netlink socket [ 1.559535] NET: Registered protocol family 17 [ 1.559680] Registering the dns_resolver key type [ 1.560789] PM: Hibernation image not present or could not be loaded. [ 1.560912] registered taskstats version 1 [ 1.561465] IMA: No TPM chip found, activating TPM-bypass! [ 1.563842] Magic number: 6:963:648 [ 1.563871] scsi_host host2: hash matches [ 1.563877] scsi host2: hash matches [ 1.563983] processor LNXCPU:01: hash matches [ 1.564101] rtc_cmos 00:04: setting system clock to 2010-12-03 20:38:46 UTC (1291408726) [ 1.564389] Initalizing network drop monitor service [ 1.572051] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.636611] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, DW10, max UDMA/33 [ 1.658414] ata4.00: configured for UDMA/33 [ 1.753698] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input4 [ 1.761447] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input5 [ 1.763120] ata3: SATA link down (SStatus 0 SControl 300) [ 1.787219] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.907020] usb 1-1: New USB device found, idVendor=05a9, idProduct=2640 [ 1.907029] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.907037] usb 1-1: Product: Laptop Integrated Webcam [ 1.907043] usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3 [ 2.181227] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.319160] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 2.486280] usb 6-2: New USB device found, idVendor=046d, idProduct=c517 [ 2.486289] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.486296] usb 6-2: Product: USB Receiver [ 2.486302] usb 6-2: Manufacturer: Logitech [ 2.505613] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input6 [ 2.506889] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0 [ 36.001170] ata1.00: qc timeout (cmd 0x27) [ 36.001187] ata1.00: failed to read native max address (err_mask=0x4) [ 36.001194] ata1.00: HPA support seems broken, skipping HPA handling [ 36.001509] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 36.001858] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 36.002246] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 36.029123] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 36.030289] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input7 [ 36.031983] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1 [ 36.238211] usb 7-2: new full speed USB device using uhci_hcd and address 2 [ 36.307575] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 36.308293] ata1.00: ATA-8: TOSHIBA MK2546GSX, LB013D, max UDMA/100 [ 36.308310] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA [ 36.309278] ata1.00: configured for UDMA/100 [ 36.310595] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5 [ 36.312478] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 36.312938] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 36.313039] sd 0:0:0:0: [sda] Write Protect is off [ 36.313047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 36.313264] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.318433] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H DW10 PQ: 0 ANSI: 5 [ 36.335230] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 36.335244] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 36.336431] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 36.337045] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 36.398715] usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500 [ 36.398724] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 36.398732] usb 7-2: Product: BCM2045B2 [ 36.398737] usb 7-2: Manufacturer: Broadcom [ 36.400929] hub 7-2:1.0: USB hub found [ 36.402733] hub 7-2:1.0: 3 ports detected [ 36.679703] usb 7-2.1: new full speed USB device using uhci_hcd and address 3 [ 36.768221] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 36.772364] sd 0:0:0:0: [sda] Attached SCSI disk [ 36.773011] Freeing unused kernel memory: 2744k freed [ 36.773011] Write protecting the kernel read-only data: 10240k [ 36.789969] Freeing unused kernel memory: 1276k freed [ 36.792956] Freeing unused kernel memory: 1616k freed [ 36.800534] usb 7-2.1: New USB device found, idVendor=413c, idProduct=8126 [ 36.800548] usb 7-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 36.800557] usb 7-2.1: Product: BCM2045 [ 36.800562] usb 7-2.1: Manufacturer: Broadcom Corp [ 36.823979] mount used greatest stack depth: 5248 bytes left [ 36.874647] usb 7-2.2: new full speed USB device using uhci_hcd and address 4 [ 36.878951] dracut: dracut-006-5.fc14 [ 36.943518] udev[84]: starting version 161 [ 36.996694] usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502 [ 36.996706] usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 36.996715] usb 7-2.2: Manufacturer: Broadcom Corp [ 105.689486] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input8 [ 105.690223] generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 [ 105.693130] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 105.693268] ehci_hcd 0000:00:1d.7: PME# enabled [ 105.755988] usb 7-2.3: new full speed USB device using uhci_hcd and address 5 [ 105.805477] udevadm used greatest stack depth: 5200 bytes left [ 105.875286] [drm] Initialized drm 1.1.0 20060810 [ 105.915996] usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503 [ 105.916011] usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 [ 105.916011] usb 7-2.3: Manufacturer: Broadcom Corp [ 105.932670] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input9 [ 105.937353] generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 [ 105.948127] xen: registering gsi 16 triggering 0 polarity 1 [ 105.948133] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 105.948142] xen: --> irq=16 [ 105.948147] Already setup the GSI :16 [ 105.948155] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 105.948173] i915 0000:00:02.0: setting latency timer to 64 [ 106.257101] [drm] MTRR allocation failed. Graphics performance may suffer. [ 106.318984] composite sync not supported [ 106.488426] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 106.488878] [drm] initialized overlay support [ 106.489013] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 106.501316] composite sync not supported [ 106.511230] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 106.585871] fbcon: inteldrmfb (fb0) is primary device [ 106.587198] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 106.617125] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 106.617129] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero. [ 106.622541] Console: switching to colour frame buffer device 160x50 [ 106.625011] fb0: inteldrmfb frame buffer device [ 106.625011] drm: registered panic notifier [ 106.674422] acpi device:30: registered as cooling_device2 [ 106.677398] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input10 [ 106.678382] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 106.678663] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work. [ 106.678943] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 106.681091] modprobe used greatest stack depth: 3632 bytes left [ 115.383580] dracut: Starting plymouth daemon [ 115.429847] composite sync not supported [ 116.062508] xen: registering gsi 16 triggering 0 polarity 1 [ 116.062514] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 116.062551] xen: --> irq=16 [ 116.062557] Already setup the GSI :16 [ 116.062579] firewire_ohci 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 116.084452] sdhci: Secure Digital Host Controller Interface driver [ 116.084498] sdhci: Copyright(c) Pierre Ossman [ 116.126456] firewire_ohci: Added fw-ohci device 0000:02:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 116.128758] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22) [ 116.128837] xen: registering gsi 18 triggering 0 polarity 1 [ 116.128867] xen: --> irq=18 [ 116.128877] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 116.132819] Registered led device: mmc0:: [ 116.134397] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA [ 131.799412] firewire_core: created device fw0: GUID 444fc00012d94c70, S400 [ 133.104764] dracut: Scanning devices sda7 for LVM volume groups [ 133.380718] dracut: Reading all physical volumes. This may take a while... [ 133.382792] dracut: Found volume group "vg0" using metadata type lvm2 [ 143.325625] dracut: 7 logical volume(s) in volume group "vg0" now active [ 143.417889] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 143.510994] dracut: Remounting /dev/disk/by-uuid/23bea158-7d3e-4112-82ae-4f394e0b8b56 with -o noatime,ro [ 143.544636] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 143.585225] dracut: Mounted root filesystem /dev/mapper/vg0-austen3b [ 143.801926] dracut: Loading SELinux policy [ 144.342736] SELinux: 2048 avtab hash slots, 210512 rules. [ 144.664886] SELinux: 2048 avtab hash slots, 210512 rules. [ 145.997495] SELinux: 9 users, 14 roles, 3472 types, 181 bools, 1 sens, 1024 cats [ 145.997502] SELinux: 77 classes, 210512 rules [ 146.025709] SELinux: Permission read_policy in class security not defined in policy. [ 146.026023] SELinux: the above unknown classes and permissions will be allowed [ 146.026023] SELinux: Completing initialization. [ 146.026023] SELinux: Setting up existing superblocks. [ 146.026023] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 146.026023] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 146.026023] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 146.026023] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 146.026023] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 146.026023] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 146.026023] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 146.026023] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 146.045012] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 146.045012] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 146.045012] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 146.045012] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 146.045012] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 146.045012] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 146.045012] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 146.045012] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 146.045012] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 146.045012] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 146.068415] SELinux: initialized (dev dm-8, type ext4), uses xattr [ 146.105894] type=1403 audit(1291408871.041:2): policy loaded auid=4294967295 ses=4294967295 [ 146.687015] restorecon used greatest stack depth: 3600 bytes left [ 146.972245] dracut: Switching root [ 148.433078] readahead-collector: starting [ 150.747204] udev[408]: starting version 161 [ 151.763232] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 152.332329] Linux video capture interface: v2.00 [ 152.427894] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 152.430482] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 152.432985] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26). [ 152.433625] uvcvideo: Failed to initialize the device (-5). [ 152.440323] usbcore: registered new interface driver uvcvideo [ 152.441019] USB Video Class driver (v1.0.0) [ 153.831044] wmi: Mapper loaded [ 154.014580] cfg80211: Calling CRDA to update world regulatory domain [ 154.345261] audit: name_count maxed, losing inode data: dev=00:07, inode=10268 [ 154.345329] audit: name_count maxed, losing inode data: dev=00:07, inode=10268 [ 154.345363] audit: name_count maxed, losing inode data: dev=00:07, inode=10268 [ 154.345418] audit: name_count maxed, losing inode data: dev=00:07, inode=10260 [ 154.345445] audit: name_count maxed, losing inode data: dev=00:07, inode=10273 [ 154.345471] audit: name_count maxed, losing inode data: dev=00:07, inode=10273 [ 154.345515] audit: name_count maxed, losing inode data: dev=00:07, inode=10273 [ 154.345543] audit: name_count maxed, losing inode data: dev=00:07, inode=10273 [ 154.345571] audit: name_count maxed, losing inode data: dev=00:07, inode=10260 [ 154.346002] audit: name_count maxed, losing inode data: dev=00:07, inode=10278 [ 154.346024] audit: name_count maxed, losing inode data: dev=00:07, inode=10278 [ 154.346090] audit: name_count maxed, losing inode data: dev=00:07, inode=10278 [ 154.346117] audit: name_count maxed, losing inode data: dev=00:07, inode=10278 [ 154.346146] audit: name_count maxed, losing inode data: dev=00:07, inode=10260 [ 154.346180] audit: name_count maxed, losing inode data: dev=00:07, inode=10283 [ 154.346206] audit: name_count maxed, losing inode data: dev=00:07, inode=10283 [ 154.346242] audit: name_count maxed, losing inode data: dev=00:07, inode=10283 [ 154.346544] audit: name_count maxed, losing inode data: dev=00:07, inode=10283 [ 154.346575] audit: name_count maxed, losing inode data: dev=00:07, inode=1088 [ 154.346604] audit: name_count maxed, losing inode data: dev=00:07, inode=10288 [ 154.346631] audit: name_count maxed, losing inode data: dev=00:07, inode=10288 [ 154.346657] audit: name_count maxed, losing inode data: dev=00:07, inode=10288 [ 154.346683] audit: name_count maxed, losing inode data: dev=00:07, inode=10291 [ 154.346718] audit: name_count maxed, losing inode data: dev=00:07, inode=10291 [ 154.346766] audit: name_count maxed, losing inode data: dev=00:07, inode=10291 [ 154.346793] audit: name_count maxed, losing inode data: dev=00:07, inode=10291 [ 154.346828] audit: name_count maxed, losing inode data: dev=00:07, inode=10288 [ 154.346854] audit: name_count maxed, losing inode data: dev=00:07, inode=10296 [ 154.346880] audit: name_count maxed, losing inode data: dev=00:07, inode=10296 [ 154.346919] audit: name_count maxed, losing inode data: dev=00:07, inode=10296 [ 154.347220] audit: name_count maxed, losing inode data: dev=00:07, inode=10296 [ 154.347276] audit: name_count maxed, losing inode data: dev=00:07, inode=1088 [ 154.347305] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 [ 154.347331] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 [ 154.347358] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 [ 154.347384] audit: name_count maxed, losing inode data: dev=00:07, inode=10304 [ 154.347411] audit: name_count maxed, losing inode data: dev=00:07, inode=10304 [ 154.347454] audit: name_count maxed, losing inode data: dev=00:07, inode=10304 [ 154.347487] audit: name_count maxed, losing inode data: dev=00:07, inode=10304 [ 154.347517] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 [ 154.347543] audit: name_count maxed, losing inode data: dev=00:07, inode=10309 [ 154.347569] audit: name_count maxed, losing inode data: dev=00:07, inode=10309 [ 154.347605] audit: name_count maxed, losing inode data: dev=00:07, inode=10309 [ 154.347632] audit: name_count maxed, losing inode data: dev=00:07, inode=10309 [ 154.347660] audit: name_count maxed, losing inode data: dev=00:07, inode=10301 [ 154.347713] audit: name_count maxed, losing inode data: dev=00:07, inode=10314 [ 154.347740] audit: name_count maxed, losing inode data: dev=00:07, inode=10314 [ 154.348207] audit: name_count maxed, losing inode data: dev=00:07, inode=10314 [ 154.348236] audit: name_count maxed, losing inode data: dev=00:07, inode=10314 [ 154.506418] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 154.507037] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 154.513352] xen: registering gsi 17 triggering 0 polarity 1 [ 154.513358] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 154.514010] xen: --> irq=17 [ 154.515084] Already setup the GSI :17 [ 154.516062] iwlagn 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 154.516062] iwlagn 0000:0b:00.0: setting latency timer to 64 [ 154.521583] iwlagn 0000:0b:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 154.567366] iwlagn 0000:0b:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 154.569748] iwlagn 0000:0b:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 154.756009] sky2: driver version 1.28 [ 154.762160] xen: registering gsi 16 triggering 0 polarity 1 [ 154.762166] xen_map_pirq_gsi: returning irq 16 for gsi 16 [ 154.763010] xen: --> irq=16 [ 154.763822] Already setup the GSI :16 [ 154.764770] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 154.767238] sky2 0000:09:00.0: setting latency timer to 64 [ 154.767416] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 [ 154.776659] sky2 0000:09:00.0: eth0: addr 00:1d:09:4a:96:a6 [ 156.353946] Bluetooth: Core ver 2.15 [ 156.359231] NET: Registered protocol family 31 [ 156.360024] Bluetooth: HCI device and connection manager initialized [ 156.360024] Bluetooth: HCI socket layer initialized [ 156.569033] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 156.578429] usbcore: registered new interface driver btusb [ 156.793307] iTCO_vendor_support: vendor-support=0 [ 156.874972] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 156.877518] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 156.880377] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 157.059584] input: Dell WMI hotkeys as /devices/virtual/input/input11 [ 157.180515] xen: registering gsi 18 triggering 0 polarity 1 [ 157.180521] xen_map_pirq_gsi: returning irq 18 for gsi 18 [ 157.181010] xen: --> irq=18 [ 157.182037] Already setup the GSI :18 [ 157.183021] r852 0000:02:09.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 157.185724] r852: driver loaded succesfully [ 157.387499] iwlagn 0000:0b:00.0: loaded firmware version 228.61.2.24 [ 157.894405] xen: registering gsi 21 triggering 0 polarity 1 [ 157.894411] xen_map_pirq_gsi: returning irq 21 for gsi 21 [ 157.895075] xen: --> irq=21 [ 157.895936] Already setup the GSI :21 [ 157.896888] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 157.899643] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 158.988157] cfg80211: World regulatory domain updated: [ 158.989015] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 158.989015] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 158.989015] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 158.989015] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 158.989015] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 158.989015] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 159.847134] cfg80211: Calling CRDA for country: GB [ 160.074022] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 161.611185] ALSA sound/pci/hda/hda_codec.c:4619: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 161.611191] ALSA sound/pci/hda/hda_codec.c:4623: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 161.611196] ALSA sound/pci/hda/hda_codec.c:4627: hp_outs=2 (0xa/0xf/0x0/0x0/0x0) [ 161.611201] ALSA sound/pci/hda/hda_codec.c:4628: mono: mono_out=0x0 [ 161.611205] ALSA sound/pci/hda/hda_codec.c:4631: dig-out=0x21/0x0 [ 161.611210] ALSA sound/pci/hda/hda_codec.c:4632: inputs: [ 161.611214] ALSA sound/pci/hda/hda_codec.c:4638: [ 161.611785] ALSA sound/pci/hda/patch_sigmatel.c:3040: stac92xx: dac_nids=2 (0x2/0x5/0x0/0x0/0x0) [ 162.492213] cfg80211: Regulatory domain changed to country: GB [ 162.493013] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 162.493013] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 162.493013] (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 162.493013] (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 162.493013] (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 163.788950] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 163.792143] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 163.794706] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 163.798976] audit: name_count maxed, losing inode data: dev=00:05, inode=11782 [ 163.799690] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.799816] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.803318] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.803369] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.805691] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.805753] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.808665] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.808921] audit: name_count maxed, losing inode data: dev=00:05, inode=10183 [ 163.811368] xen: registering gsi 17 triggering 0 polarity 1 [ 163.811373] xen_map_pirq_gsi: returning irq 17 for gsi 17 [ 163.812025] xen: --> irq=17 [ 163.812691] Already setup the GSI :17 [ 163.813676] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 163.915216] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 165.686148] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 169.198131] ip used greatest stack depth: 3488 bytes left [ 169.912335] SELinux: initialized (dev xenfs, type xenfs), uses genfs_contexts [ 169.960778] Event-channel device installed. [ 172.164745] EXT4-fs (dm-8): re-mounted. Opts: (null) [ 174.063444] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts [ 176.849172] dmeventd (1025): /proc/1025/oom_adj is deprecated, please use /proc/1025/oom_score_adj instead. [ 178.278183] NET: Registered protocol family 10 [ 178.292650] lo: Disabled Privacy Extensions [ 178.335359] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 188.895215] Bluetooth: L2CAP ver 2.15 [ 188.896016] Bluetooth: L2CAP socket layer initialized [ 189.036115] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 189.037059] Bluetooth: BNEP filters: protocol multicast [ 189.070325] Bluetooth: SCO (Voice Link) ver 0.6 [ 189.071010] Bluetooth: SCO socket layer initialized [ 189.287778] Bluetooth: RFCOMM TTY layer initialized [ 189.288014] Bluetooth: RFCOMM socket layer initialized [ 189.288014] Bluetooth: RFCOMM ver 1.11 [ 190.275241] sky2 0000:09:00.0: eth0: enabling interface [ 190.306010] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 190.671870] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 191.713023] btusb_intr_complete: hci0 urb ffff8800cf6fc630 failed to resubmit (1) [ 191.716094] btusb_bulk_complete: hci0 urb ffff8800cf6fc948 failed to resubmit (1) [ 191.718974] btusb_bulk_complete: hci0 urb ffff8800cf6fca50 failed to resubmit (1) [ 194.208998] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 194.601189] XENBUS: Unable to read cpu state [ 194.606842] XENBUS: Unable to read cpu state [ 195.605014] Bridge firewalling registered [ 199.162255] Ebtables v2.0 registered [ 200.146258] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 200.147480] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 200.200013] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 200.215545] lo: Disabled Privacy Extensions [ 200.226307] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 228.501223] readahead-collector: sorting [ 228.815859] readahead-collector: finished