On Tue, 23 Nov 2010 13:32:42 -0500, Konrad Rzeszutek Wilk
<konrad.wilk@xxxxxxxxxx> wrote:
> On Tue, Nov 23, 2010 at 05:43:22PM +0000, Stefano Stabellini wrote:
> > On Mon, 22 Nov 2010, Konrad Rzeszutek Wilk wrote:
> > > > [ 0.000000] MPTABLE: OEM ID:
> > > > [ 0.000000] MPTABLE: Product ID: Kings Canyon
> > > > [ 0.000000] MPTABLE: APIC at: 0xFEE00000
> > >
> > > Oh, MPTtable..
> > > .. snip ..
> > > > [ 1.560006] ACPI: Interpreter disabled.
> > >
> > > .. and ACPI disable..
> > > ..
> > >
> > > That is a rather odd IRQ number that is shared amongst all of the
> > > devices. Is there a "OS Compatibility" BIOS option where you can
> > > select Linux?
So, the BIOS had this option set to "Other". As recommended elsewhere, I
set it to Win2000 (I didn't bother trying Win95, Win98, or WinME. I was
surprised there was no Microsoft Bob option!). However, this did not fix
the problem, but read on!
> Technical details aside, what it comes down to is that we need the
> ACPI with IRQ support. The manual on pg 4-17 says you can enable ACPI but
> I am not sure if ACPI 1.0 even has IRQ support.. try it out and see what
> happens.
It looks like if I enable ACPI, things seem to work! I'm including the
working bootup, the /proc/interrupts and also the output from hitting
Ctrl-A; '?' and then '*' which might give you some insight into the
IO-APIC vectors. For fun, I diffed the old and new, and included the
diffs as well, makes it a little easier to see what changed.
All are included below if you are interested in having a look at how
this changed things.
I did also try to boot with ACPI enabled and the "OS Compatability"
option set back to "Other" and it still booted.
One thing to note about the boot log below is that I have two devices
that are encrypted and on boot typically the passphrase is prompted on
the serial. However, it never prompts for the first disk passphrase (the
root), it just sits there (you can see this at 43.866543seconds in). On
a whim, I typed in the passphrase and it booted, further down it
actually prompted for the passphrase for the other device, and you can
see that in the log. I'm not sure why this is happening, its unrelated
to this particular issue, but I thought I had better point it out if you
were reviewing the bootlog below and found that anomoly there. If you do
know what is causing this, by all means let me know :)
Loading Linux 2.6.32.25 ...
Loading initial ramdisk ...
__ __ _ _ ___ ____ _
\ \/ /___ _ __ | || | / _ \ |___ \ _ __ ___/ | _ __ _ __ ___
\ // _ \ '_ \ | || |_| | | | __) |__| '__/ __| |__| '_ \| '__/ _ \
/ \ __/ | | | |__ _| |_| | / __/|__| | | (__| |__| |_) | | | __/
/_/\_\___|_| |_| |_|(_)___(_)_____| |_| \___|_| | .__/|_| \___|
|_|
(XEN) Xen version 4.0.2-rc1-pre (root@xxxxxxxxxx) (gcc version 4.4.5 (Debian
4.4.5-6) ) Fri Nov 19 15:25:02 PST 2010
(XEN) Latest ChangeSet: Tue Nov 16 11:54:48 2010 +0000 21386:e9156d9d996b
(XEN) Bootloader: GRUB 1.98+20100804-8
(XEN) Command line: placeholder dom0_mem=512M dom0_max_vcpus=1 lapic=debug
apic_verbosity=debug apic=debug loglvl=all guest_loglvl=all console=com1
com1=115200,8n1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 2 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f800 (usable)
(XEN) 000000000009f800 - 00000000000a0000 (reserved)
(XEN) 00000000000d2000 - 00000000000d4000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000f7ef0000 (usable)
(XEN) 00000000f7ef0000 - 00000000f7ef8000 (ACPI data)
(XEN) 00000000f7ef8000 - 00000000f7f00000 (ACPI NVS)
(XEN) 00000000f7f00000 - 00000000f7f80000 (usable)
(XEN) 00000000f7f80000 - 00000000f8000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff800000 - 00000000ffc00000 (reserved)
(XEN) 00000000fff00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000208000000 (usable)
(XEN) System RAM: 8191MB (8387644kB)
(XEN) ACPI: RSDP 000F6D00, 0014 (r0 PTLTD )
(XEN) ACPI: RSDT F7EF44E5, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
(XEN) ACPI: FACP F7EF7E78, 0074 (r1 INTEL K_CANYON 6040000 PTL 8)
(XEN) ACPI: DSDT F7EF4519, 395F (r1 INTEL PLUMAS 6040000 MSFT 100000E)
(XEN) ACPI: FACS F7EF8FC0, 0040
(XEN) ACPI: APIC F7EF7EEC, 009C (r1 PTLTD APIC 6040000 LTP 0)
(XEN) ACPI: BOOT F7EF7F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
(XEN) ACPI: SPCR F7EF7FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000208000000
(XEN) Xen heap: 8MB (8852kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f6ca0
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x1008
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[1004,0], pm1x_evt[1000,0]
(XEN) ACPI: wakeup_vec[f7ef8fcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:2 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
(XEN) Processor #6 15:2 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:2 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
(XEN) Processor #7 15:2 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
(XEN) ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
(XEN) IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to fff7e000 (fee00000)
(XEN) mapped IOAPIC to fff7d000 (fec00000)
(XEN) mapped IOAPIC to fff7c000 (fec80000)
(XEN) mapped IOAPIC to fff7b000 (fec80400)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3199.175 MHz processor.
(XEN) CPU0: Intel Extended MCE MSRs (12) available
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) Getting VERSION: 50014
(XEN) Getting VERSION: 50014
(XEN) Getting ID: 0
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) masked ExtINT on CPU#1
(XEN) CPU1: Intel Extended MCE MSRs (12) available
(XEN) masked ExtINT on CPU#2
(XEN) CPU2: Intel Extended MCE MSRs (12) available
(XEN) masked ExtINT on CPU#3
(XEN) CPU3: Intel Extended MCE MSRs (12) available
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22,
2-23, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13,
3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-0, 4-1, 4-2, 4-3,
4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17,
4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #2 registers: 24.
(XEN) number of IO-APIC #3 registers: 24.
(XEN) number of IO-APIC #4 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #2......
(XEN) .... register #00: 02008000
(XEN) ....... : physical APIC id: 02
(XEN) ....... : Delivery Type: 1
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 001 01 0 0 0 0 0 1 1 28
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 001 01 0 0 0 0 0 1 1 30
(XEN) 04 001 01 0 0 0 0 0 1 1 F1
(XEN) 05 001 01 0 0 0 0 0 1 1 38
(XEN) 06 001 01 0 0 0 0 0 1 1 40
(XEN) 07 001 01 0 0 0 0 0 1 1 48
(XEN) 08 001 01 0 0 0 0 0 1 1 50
(XEN) 09 001 01 1 1 0 0 0 1 1 58
(XEN) 0a 001 01 0 0 0 0 0 1 1 60
(XEN) 0b 001 01 0 0 0 0 0 1 1 68
(XEN) 0c 001 01 0 0 0 0 0 1 1 70
(XEN) 0d 001 01 0 0 0 0 0 1 1 78
(XEN) 0e 001 01 0 0 0 0 0 1 1 88
(XEN) 0f 001 01 0 0 0 0 0 1 1 90
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #3......
(XEN) .... register #00: 03000000
(XEN) ....... : physical APIC id: 03
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 03000000
(XEN) ....... : arbitration: 03
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #4......
(XEN) .... register #00: 04000000
(XEN) ....... : physical APIC id: 04
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 04000000
(XEN) ....... : arbitration: 04
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ40 -> 0:1
(XEN) IRQ48 -> 0:3
(XEN) IRQ241 -> 0:4
(XEN) IRQ56 -> 0:5
(XEN) IRQ64 -> 0:6
(XEN) IRQ72 -> 0:7
(XEN) IRQ80 -> 0:8
(XEN) IRQ88 -> 0:9
(XEN) IRQ96 -> 0:10
(XEN) IRQ104 -> 0:11
(XEN) IRQ112 -> 0:12
(XEN) IRQ120 -> 0:13
(XEN) IRQ136 -> 0:14
(XEN) IRQ144 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 3199.1631 MHz.
(XEN) ..... host bus clock speed is 133.2983 MHz.
(XEN) ..... bus_scale = 0x00008883
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 3.579MHz ACPI PM Timer
ÿ(XEN) Allocated console ring of 32 KiB.
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) Brought up 4 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x166c000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000038000000->000000003c000000 (114688 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c1000000->c166c000
(XEN) Init. ramdisk: c166c000->c2e09000
(XEN) Phys-Mach map: c2e09000->c2e89000
(XEN) Start info: c2e89000->c2e8947c
(XEN) Page tables: c2e8a000->c2ea7000
(XEN) Boot stack: c2ea7000->c2ea8000
(XEN) TOTAL: c0000000->c3000000
(XEN) ENTRY ADDRESS: c13e0000
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM:
...........................................................................done.
(XEN) trace.c:89:d32767 calc_tinfo_first_offset: NR_CPUs 128, offset_in_bytes
258, t_info_first_offset 65
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen)
(XEN) Freed 152kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Reserving virtual address space above 0xf5800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32.25 (root@quelea) (gcc version 4.4.5 (Debian
4.4.5-6) ) #6 SMP Sat Nov 20 09:14:48 PST 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] released 0 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] Xen: 00000000f7ef0000 - 00000000f7ef8000 (ACPI data)
[ 0.000000] Xen: 00000000f7ef8000 - 00000000f7f00000 (ACPI NVS)
[ 0.000000] Xen: 00000000f7f80000 - 00000000f8000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fec80000 - 00000000fec81000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000208000000 - 00000002dfef0000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around
it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x2dfef0 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 037ff000
[ 0.000000] init_memory_mapping: 0000000000000000-000000002cffe000
[ 0.000000] 0000000000 - 002cffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 2cffe000 @ 100000-26d000
[ 0.000000] RAMDISK: 0166c000 - 02e09000
[ 0.000000] ACPI: RSDP 000f6d00 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT f7ef44e5 00034 (v01 PTLTD RSDT 06040000 LTP
00000000)
[ 0.000000] ACPI: FACP f7ef7e78 00074 (v01 INTEL K_CANYON 06040000 PTL
00000008)
[ 0.000000] ACPI: DSDT f7ef4519 0395F (v01 INTEL PLUMAS 06040000 MSFT
0100000E)
[ 0.000000] ACPI: FACS f7ef8fc0 00040
[ 0.000000] ACPI: APIC f7ef7eec 0009C (v01 PTLTD ? APIC 06040000 LTP
00000000)
[ 0.000000] ACPI: BOOT f7ef7f88 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP
00000001)
[ 0.000000] ACPI: SPCR f7ef7fb0 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL
00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 11054MB HIGHMEM available.
[ 0.000000] 719MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2cffe000
[ 0.000000] low ram: 0 - 2cffe000
[ 0.000000] node 0 low ram: 00000000 - 2cffe000
[ 0.000000] node 0 bootmap 00010000 - 00015a00
[ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 002cffe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0002e8a000 - 0002ea7000] XEN PAGETABLES ==> [0002e8a000
- 0002ea7000]
[ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #4 [0001000000 - 00014fb8b4] TEXT DATA BSS ==> [0001000000
- 00014fb8b4]
[ 0.000000] #5 [000166c000 - 0002e09000] RAMDISK ==> [000166c000
- 0002e09000]
[ 0.000000] #6 [0002e09000 - 0002e8a000] XEN START INFO ==> [0002e09000
- 0002e8a000]
[ 0.000000] #7 [0208000000 - 02dfef0000] XEN EXTRA
[ 0.000000] #8 [00014fc000 - 0001509114] BRK ==> [00014fc000
- 0001509114]
[ 0.000000] #9 [0000100000 - 000024f000] PGTABLE ==> [0000100000
- 000024f000]
[ 0.000000] #10 [0000010000 - 0000016000] BOOTMAP ==> [0000010000
- 0000016000]
[ 0.000000] found SMP MP-table at [c00f6ca0] f6ca0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002cffe
[ 0.000000] HighMem 0x0002cffe -> 0x002dfef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00208000 -> 0x002dfef0
[ 0.000000] On node 0 totalpages: 1015423
[ 0.000000] free_area_init_node: node 0, pgdat c13d5b00, node_mem_map
c2ea7200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1408 pages used for memmap
[ 0.000000] Normal zone: 125568 pages, LIFO batch:31
[ 0.000000] HighMem zone: 22110 pages used for memmap
[ 0.000000] HighMem zone: 862354 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 0, address 0xfec80000, GSI 24-24
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
[ 0.000000] IOAPIC[2]: apic_id 4, version 0, address 0xfec80400, GSI 48-48
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 304
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 00000000f7ef0000
[ 0.000000] PM: Registered nosave memory: 00000000f7ef0000 - 00000000f7ef8000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
20000000:d7ef0000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.2-rc1-pre (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c8aba000 s37656 r0 d23784 u65536
[ 0.000000] pcpu-alloc: s37656 r0 d23784 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 991873
[ 0.000000] Kernel command line: placeholder root=/dev/mapper/quelea0-root
ro console=hvc0 earlyprintk=xen nomodeset initcall_debug debug loglevel=10
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between c8b2c000 - ccb2c000
[ 0.000000] DMA: software IO TLB at phys 0x8b2c000 - 0xcb2c000
[ 0.000000] xen_swiotlb_fixup: buf=c8b2c000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ccb8c000 size=32768
[ 0.000000] Initializing HighMem for node 0 (0002cffe:002dfef0)
[ 0.000000] Memory: 331632k/12057536k available (2588k kernel code, 192024k
reserved, 1377k data, 396k init, 3537856k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xf5556000 - 0xf57ff000 (2724 kB)
[ 0.000000] pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
[ 0.000000] vmalloc : 0xed7fe000 - 0xf4ffe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xecffe000 ( 719 MB)
[ 0.000000] .init : 0xc13e0000 - 0xc1443000 ( 396 kB)
[ 0.000000] .data : 0xc12870a5 - 0xc13df898 (1377 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12870a5 (2588 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1536
[ 0.000000] xen: --> irq=0
[ 0.000000] xen: --> irq=1
[ 0.000000] xen: --> irq=2
[ 0.000000] xen: --> irq=3
[ 0.000000] xen: --> irq=4
[ 0.000000] xen: --> irq=5
[ 0.000000] xen: --> irq=6
[ 0.000000] xen: --> irq=7
[ 0.000000] xen: --> irq=8
[ 0.000000] xen: --> irq=9
[ 0.000000] xen: --> irq=10
[ 0.000000] xen: --> irq=11
[ 0.000000] xen: --> irq=12
[ 0.000000] xen: --> irq=13
[ 0.000000] xen: --> irq=14
[ 0.000000] xen: --> irq=15
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9
[ 0.000000] xen: --> irq=9
(XEN) IOAPIC[0]: Set PCI routing entry (2-9 -> 0x58 -> IRQ 9 Mode:1 Active:0)
[ 0.000000] xen: acpi sci 9
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 3199.088 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6398.17 BogoMIPS (lpj=12796352)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: L3 cache: 1024K
[ 0.004000] CPU: Unsupported number of siblings 2
[ 0.004000] mce: CPU supports 4 MCE banks
[ 0.004000] Performance Events: no PMU driver, software events only.
[ 0.004000] SMP alternatives: switching to UP code
[ 0.004665] Freeing SMP alternatives: 13k freed
[ 0.004685] ACPI: Core revision 20090903
[ 0.015150] calling migration_init+0x0/0x43 @ 1
[ 0.015232] initcall migration_init+0x0/0x43 returned 0 after 0 usecs
[ 0.015244] calling spawn_ksoftirqd+0x0/0x43 @ 1
[ 0.015292] initcall spawn_ksoftirqd+0x0/0x43 returned 0 after 0 usecs
[ 0.015305] calling init_call_single_data+0x0/0x62 @ 1
[ 0.015315] initcall init_call_single_data+0x0/0x62 returned 0 after 0 usecs
[ 0.015327] calling spawn_softlockup_task+0x0/0x5b @ 1
[ 0.015380] initcall spawn_softlockup_task+0x0/0x5b returned 0 after 0 usecs
[ 0.015391] calling relay_init+0x0/0xd @ 1
[ 0.015400] initcall relay_init+0x0/0xd returned 0 after 0 usecs
[ 0.015410] calling tracer_alloc_buffers+0x0/0x12b @ 1
[ 0.015569] initcall tracer_alloc_buffers+0x0/0x12b returned 0 after 0 usecs
[ 0.015581] calling init_trace_printk+0x0/0xa @ 1
[ 0.015590] initcall init_trace_printk+0x0/0xa returned 0 after 0 usecs
[ 0.015600] Brought up 1 CPUs
[ 0.015616] CPU0 attaching NULL sched-domain.
[ 0.015844] devtmpfs: initialized
[ 0.016307] calling init_mmap_min_addr+0x0/0xd @ 1
[ 0.016317] initcall init_mmap_min_addr+0x0/0xd returned 0 after 0 usecs
[ 0.016330] calling init_cpufreq_transition_notifier_list+0x0/0x14 @ 1
[ 0.016342] initcall init_cpufreq_transition_notifier_list+0x0/0x14 returned
0 after 0 usecs
[ 0.016355] calling net_ns_init+0x0/0xc9 @ 1
[ 0.016453] initcall net_ns_init+0x0/0xc9 returned 0 after 0 usecs
[ 0.016466] calling e820_mark_nvs_memory+0x0/0x2d @ 1
[ 0.016482] initcall e820_mark_nvs_memory+0x0/0x2d returned 0 after 0 usecs
[ 0.016493] calling cpufreq_tsc+0x0/0x21 @ 1
[ 0.016503] initcall cpufreq_tsc+0x0/0x21 returned 0 after 0 usecs
[ 0.016514] calling pci_reboot_init+0x0/0xd @ 1
[ 0.016526] initcall pci_reboot_init+0x0/0xd returned 0 after 0 usecs
[ 0.016536] calling reboot_init+0x0/0xd @ 1
[ 0.016552] initcall reboot_init+0x0/0xd returned 0 after 0 usecs
[ 0.016562] calling init_lapic_sysfs+0x0/0x24 @ 1
[ 0.016588] initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs
[ 0.016602] calling alloc_frozen_cpus+0x0/0x3 @ 1
[ 0.016612] initcall alloc_frozen_cpus+0x0/0x3 returned 0 after 0 usecs
[ 0.016622] calling sysctl_init+0x0/0x25 @ 1
[ 0.016811] initcall sysctl_init+0x0/0x25 returned 0 after 0 usecs
[ 0.016821] calling ksysfs_init+0x0/0x92 @ 1
[ 0.016841] initcall ksysfs_init+0x0/0x92 returned 0 after 0 usecs
[ 0.016852] calling async_init+0x0/0x4a @ 1
[ 0.016903] initcall async_init+0x0/0x4a returned 0 after 0 usecs
[ 0.016915] calling init_jiffies_clocksource+0x0/0xa @ 1
[ 0.016926] initcall init_jiffies_clocksource+0x0/0xa returned 0 after 0
usecs
[ 0.016937] calling pm_init+0x0/0x4b @ 1
[ 0.016995] initcall pm_init+0x0/0x4b returned 0 after 0 usecs
[ 0.017007] calling pm_disk_init+0x0/0xf @ 1
[ 0.017019] initcall pm_disk_init+0x0/0xf returned 0 after 0 usecs
[ 0.017032] calling swsusp_header_init+0x0/0x22 @ 1
[ 0.017043] initcall swsusp_header_init+0x0/0x22 returned 0 after 0 usecs
[ 0.017054] calling init_zero_pfn+0x0/0x10 @ 1
[ 0.017063] initcall init_zero_pfn+0x0/0x10 returned 0 after 0 usecs
[ 0.017073] calling filelock_init+0x0/0x25 @ 1
[ 0.017083] initcall filelock_init+0x0/0x25 returned 0 after 0 usecs
[ 0.017093] calling init_script_binfmt+0x0/0xc @ 1
[ 0.017102] initcall init_script_binfmt+0x0/0xc returned 0 after 0 usecs
[ 0.017112] calling init_elf_binfmt+0x0/0xc @ 1
[ 0.017121] initcall init_elf_binfmt+0x0/0xc returned 0 after 0 usecs
[ 0.017130] calling debugfs_init+0x0/0x46 @ 1
[ 0.017146] initcall debugfs_init+0x0/0x46 returned 0 after 0 usecs
[ 0.017157] calling securityfs_init+0x0/0x3d @ 1
[ 0.017171] initcall securityfs_init+0x0/0x3d returned 0 after 0 usecs
[ 0.017182] calling random32_init+0x0/0xa4 @ 1
[ 0.017192] initcall random32_init+0x0/0xa4 returned 0 after 0 usecs
[ 0.017204] calling virtio_init+0x0/0x1b @ 1
[ 0.017231] initcall virtio_init+0x0/0x1b returned 0 after 0 usecs
[ 0.017243] calling __gnttab_init+0x0/0x1b @ 1
[ 0.017303] Grant table initialized
[ 0.017314] initcall __gnttab_init+0x0/0x1b returned 0 after 0 usecs
[ 0.017324] calling regulator_init+0x0/0x20 @ 1
[ 0.017332] regulator: core version 0.5
[ 0.017353] initcall regulator_init+0x0/0x20 returned 0 after 0 usecs
[ 0.017363] calling cpufreq_core_init+0x0/0x75 @ 1
[ 0.017377] initcall cpufreq_core_init+0x0/0x75 returned 0 after 0 usecs
[ 0.017387] calling cpuidle_init+0x0/0x2e @ 1
[ 0.017401] initcall cpuidle_init+0x0/0x2e returned 0 after 0 usecs
[ 0.017411] calling sock_init+0x0/0x4f @ 1
[ 0.017470] initcall sock_init+0x0/0x4f returned 0 after 0 usecs
[ 0.017481] calling net_inuse_init+0x0/0x1b @ 1
[ 0.017493] initcall net_inuse_init+0x0/0x1b returned 0 after 0 usecs
[ 0.017503] calling netpoll_init+0x0/0x2b @ 1
[ 0.017512] initcall netpoll_init+0x0/0x2b returned 0 after 0 usecs
[ 0.017522] calling netlink_proto_init+0x0/0xf8 @ 1
[ 0.017550] NET: Registered protocol family 16
[ 0.017580] initcall netlink_proto_init+0x0/0xf8 returned 0 after 0 usecs
[ 0.017592] calling bdi_class_init+0x0/0x31 @ 1
[ 0.017630] initcall bdi_class_init+0x0/0x31 returned 0 after 0 usecs
[ 0.017641] calling kobject_uevent_init+0x0/0x49 @ 1
[ 0.017657] initcall kobject_uevent_init+0x0/0x49 returned 0 after 0 usecs
[ 0.017668] calling pcibus_class_init+0x0/0xf @ 1
[ 0.017692] initcall pcibus_class_init+0x0/0xf returned 0 after 0 usecs
[ 0.017703] calling pci_driver_init+0x0/0xa @ 1
[ 0.017734] initcall pci_driver_init+0x0/0xa returned 0 after 0 usecs
[ 0.017746] calling backlight_class_init+0x0/0x48 @ 1
[ 0.017769] initcall backlight_class_init+0x0/0x48 returned 0 after 0 usecs
[ 0.017781] calling xenbus_init+0x0/0x260 @ 1
[ 0.017936] initcall xenbus_init+0x0/0x260 returned 0 after 0 usecs
[ 0.017947] calling tty_class_init+0x0/0x2b @ 1
[ 0.017969] initcall tty_class_init+0x0/0x2b returned 0 after 0 usecs
[ 0.017981] calling vtconsole_class_init+0x0/0x9b @ 1
[ 0.018035] initcall vtconsole_class_init+0x0/0x9b returned 0 after 0 usecs
[ 0.018046] calling spi_init+0x0/0x8c @ 1
[ 0.018084] initcall spi_init+0x0/0x8c returned 0 after 0 usecs
[ 0.018096] calling lguest_devices_init+0x0/0x160 @ 1
[ 0.018106] initcall lguest_devices_init+0x0/0x160 returned 0 after 0 usecs
[ 0.018116] calling amd_postcore_init+0x0/0x62 @ 1
[ 0.018125] initcall amd_postcore_init+0x0/0x62 returned 0 after 0 usecs
[ 0.018136] calling arch_kdebugfs_init+0x0/0x1a @ 1
[ 0.018151] initcall arch_kdebugfs_init+0x0/0x1a returned 0 after 0 usecs
[ 0.018162] calling init_pit_clocksource+0x0/0xa3 @ 1
[ 0.018172] initcall init_pit_clocksource+0x0/0xa3 returned 0 after 0 usecs
[ 0.018182] calling mtrr_if_init+0x0/0x40 @ 1
[ 0.018195] initcall mtrr_if_init+0x0/0x40 returned 0 after 0 usecs
[ 0.018205] calling ffh_cstate_init+0x0/0x23 @ 1
[ 0.018216] initcall ffh_cstate_init+0x0/0x23 returned 0 after 0 usecs
[ 0.018226] calling acpi_pci_init+0x0/0x4d @ 1
[ 0.018235] ACPI: bus type pci registered
[ 0.018244] initcall acpi_pci_init+0x0/0x4d returned 0 after 0 usecs
[ 0.018255] calling xen_pcpu_init+0x0/0x8e @ 1
[ 0.018298] sync cpu 0 get result 1 max_id 3
[ 0.018322] sync cpu 1 get result 1 max_id 3
[ 0.018347] sync cpu 2 get result 1 max_id 3
[ 0.018371] sync cpu 3 get result 1 max_id 3
[ 0.018400] initcall xen_pcpu_init+0x0/0x8e returned 1529 after 0 usecs
[ 0.018411] initcall xen_pcpu_init+0x0/0x8e returned with error code 1529
[ 0.018421] calling register_xen_pci_notifier+0x0/0x1b @ 1
[ 0.018431] initcall register_xen_pci_notifier+0x0/0x1b returned 0 after 0
usecs
[ 0.018441] calling setup_vcpu_hotplug_event+0x0/0x1b @ 1
[ 0.018450] initcall setup_vcpu_hotplug_event+0x0/0x1b returned 0 after 0
usecs
[ 0.018461] calling dmi_id_init+0x0/0x288 @ 1
[ 0.018537] initcall dmi_id_init+0x0/0x288 returned 0 after 0 usecs
[ 0.018549] calling dma_bus_init+0x0/0x2d @ 1
[ 0.018571] initcall dma_bus_init+0x0/0x2d returned 0 after 0 usecs
[ 0.018582] calling dma_channel_table_init+0x0/0xc9 @ 1
[ 0.018599] initcall dma_channel_table_init+0x0/0xc9 returned 0 after 0 usecs
[ 0.018610] calling pci_arch_init+0x0/0x56 @ 1
[ 0.020316] PCI: PCI BIOS revision 2.10 entry at 0xfd8c5, last bus=4
[ 0.020326] PCI: Using configuration type 1 for base access
[ 0.020347] initcall pci_arch_init+0x0/0x56 returned 0 after 3906 usecs
[ 0.020358] calling topology_init+0x0/0x32 @ 1
[ 0.020383] initcall topology_init+0x0/0x32 returned 0 after 0 usecs
[ 0.020394] calling mtrr_init_finialize+0x0/0x31 @ 1
[ 0.020405] initcall mtrr_init_finialize+0x0/0x31 returned 0 after 0 usecs
[ 0.020415] calling param_sysfs_init+0x0/0x1ea @ 1
[ 0.021174] initcall param_sysfs_init+0x0/0x1ea returned 0 after 0 usecs
[ 0.021186] calling pm_sysrq_init+0x0/0x12 @ 1
[ 0.021197] initcall pm_sysrq_init+0x0/0x12 returned 0 after 0 usecs
[ 0.021207] calling audit_watch_init+0x0/0x23 @ 1
[ 0.021217] initcall audit_watch_init+0x0/0x23 returned 0 after 0 usecs
[ 0.021227] calling init_slow_work+0x0/0x2b @ 1
[ 0.021236] initcall init_slow_work+0x0/0x2b returned 0 after 0 usecs
[ 0.021246] calling default_bdi_init+0x0/0x92 @ 1
[ 0.021401] initcall default_bdi_init+0x0/0x92 returned 0 after 0 usecs
[ 0.021414] calling init_bio+0x0/0xa7 @ 1
[ 0.021489] bio: create slab <bio-0> at 0
[ 0.021517] initcall init_bio+0x0/0xa7 returned 0 after 0 usecs
[ 0.021528] calling fsnotify_init+0x0/0xa @ 1
[ 0.021538] initcall fsnotify_init+0x0/0xa returned 0 after 0 usecs
[ 0.021549] calling fsnotify_notification_init+0x0/0xdc @ 1
[ 0.021561] initcall fsnotify_notification_init+0x0/0xdc returned 0 after 0
usecs
[ 0.021572] calling cryptomgr_init+0x0/0xa @ 1
[ 0.021582] initcall cryptomgr_init+0x0/0xa returned 0 after 0 usecs
[ 0.021591] calling blk_settings_init+0x0/0x19 @ 1
[ 0.021601] initcall blk_settings_init+0x0/0x19 returned 0 after 0 usecs
[ 0.021610] calling blk_ioc_init+0x0/0x22 @ 1
[ 0.021620] initcall blk_ioc_init+0x0/0x22 returned 0 after 0 usecs
[ 0.021630] calling blk_softirq_init+0x0/0x50 @ 1
[ 0.021640] initcall blk_softirq_init+0x0/0x50 returned 0 after 0 usecs
[ 0.021649] calling blk_iopoll_setup+0x0/0x50 @ 1
[ 0.021658] initcall blk_iopoll_setup+0x0/0x50 returned 0 after 0 usecs
[ 0.021668] calling genhd_device_init+0x0/0x5d @ 1
[ 0.021748] initcall genhd_device_init+0x0/0x5d returned 0 after 0 usecs
[ 0.021760] calling blk_dev_integrity_init+0x0/0x22 @ 1
[ 0.021771] initcall blk_dev_integrity_init+0x0/0x22 returned 0 after 0 usecs
[ 0.021784] calling pci_slot_init+0x0/0x37 @ 1
[ 0.021797] initcall pci_slot_init+0x0/0x37 returned 0 after 0 usecs
[ 0.021807] calling fbmem_init+0x0/0x7c @ 1
[ 0.021837] initcall fbmem_init+0x0/0x7c returned 0 after 0 usecs
[ 0.021849] calling acpi_init+0x0/0x2cf @ 1
[ 0.023411] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.023464] ACPI: EC: Look up EC in DSDT
[ 0.030050] ACPI: Interpreter enabled
[ 0.030060] ACPI: (supports S0 S1 S4 S5)
[ 0.030128] ACPI: Using IOAPIC for interrupt routing
[ 0.040260] initcall acpi_init+0x0/0x2cf returned 0 after 19531 usecs
[ 0.040275] calling dock_init+0x0/0x79 @ 1
[ 0.040576] ACPI: No dock devices found.
[ 0.040585] initcall dock_init+0x0/0x79 returned 0 after 0 usecs
[ 0.040595] calling acpi_pci_root_init+0x0/0x21 @ 1
[ 0.043210] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.043836] pci 0000:00:1d.0: reg 20 io port: [0x2000-0x201f]
[ 0.043995] pci 0000:00:1d.1: reg 20 io port: [0x2020-0x203f]
[ 0.044001] pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f]
[ 0.044232] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4
ACPI/GPIO/TCO
[ 0.044247] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.044318] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.044341] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.044363] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.044385] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.044408] pci 0000:00:1f.1: reg 20 io port: [0x2060-0x206f]
[ 0.044431] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.044582] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 0.044826] pci 0000:01:1c.0: reg 10 32bit mmio: [0xfc100000-0xfc100fff]
[ 0.045225] pci 0000:01:1e.0: reg 10 32bit mmio: [0xfc101000-0xfc101fff]
[ 0.045584] pci 0000:00:02.0: bridge io port: [0x3000-0x4fff]
[ 0.045600] pci 0000:00:02.0: bridge 32bit mmio: [0xfc100000-0xfc8fffff]
[ 0.045770] pci 0000:02:01.0: reg 10 64bit mmio: [0xfc200000-0xfc2fffff]
[ 0.045794] pci 0000:02:01.0: reg 18 io port: [0x3000-0x30ff]
[ 0.046116] pci 0000:02:03.0: reg 10 64bit mmio: [0xfc300000-0xfc31ffff]
[ 0.046166] pci 0000:02:03.0: reg 20 io port: [0x3400-0x343f]
[ 0.046267] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 0.046284] pci 0000:02:03.0: PME# disabled
[ 0.046440] pci 0000:02:03.1: reg 10 64bit mmio: [0xfc320000-0xfc33ffff]
[ 0.046490] pci 0000:02:03.1: reg 20 io port: [0x3440-0x347f]
[ 0.046591] pci 0000:02:03.1: PME# supported from D0 D3hot D3cold
[ 0.046607] pci 0000:02:03.1: PME# disabled
[ 0.046816] pci 0000:01:1d.0: bridge io port: [0x3000-0x3fff]
[ 0.046832] pci 0000:01:1d[ 0.852407] serio: i8042 KBD port at 0x60,0x64
irq 1
[ 0.852489] initcall i8042_init+0x0/0x343 returned 0 after 245338 usecs
[ 0.852501] calling mousedev_init+0x0/0x72 @ 1
[ 0.852595] mice: PS/2 mouse device common for all mice
[ 0.852607] initcall mousedev_init+0x0/0x72 returned 0 after 93 usecs
[ 0.852618] calling atkbd_init+0x0/0x1b @ 1
[ 0.852658] initcall atkbd_init+0x0/0x1b returned 0 after 29 usecs
[ 0.852668] calling xenkbd_init+0x0/0x4b @ 1
[ 0.852678] initcall xenkbd_init+0x0/0x4b returned -19 after 0 usecs
[ 0.852688] calling cmos_init+0x0/0x5a @ 1
[ 0.852851] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.852907] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.852935] initcall cmos_init+0x0/0x5a returned 0 after 231 usecs
[ 0.852946] calling init_ladder+0x0/0xa @ 1
[ 0.852957] cpuidle: using governor ladder
[ 0.852966] initcall init_ladder+0x0/0xa returned 0 after 9 usecs
[ 0.852976] calling init_menu+0x0/0xa @ 1
[ 0.852984] cpuidle: using governor menu
[ 0.852993] initcall init_menu+0x0/0xa returned 0 after 7 usecs
[ 0.853003] calling ledtrig_ide_init+0x0/0x12 @ 1
[ 0.853015] initcall ledtrig_ide_init+0x0/0x12 returned 0 after 1 usecs
[ 0.853025] calling ibft_init+0x0/0x4e9 @ 1
[ 0.853037] No iBFT detected.
[ 0.853046] initcall ibft_init+0x0/0x4e9 returned 0 after 11 usecs
[ 0.853056] calling staging_init+0x0/0x3 @ 1
[ 0.853066] initcall staging_init+0x0/0x3 returned 0 after 0 usecs
[ 0.853101] calling flow_cache_init+0x0/0x14d @ 1
[ 0.853145] initcall flow_cache_init+0x0/0x14d returned 0 after 32 usecs
[ 0.853155] calling llc_init+0x0/0x17 @ 1
[ 0.853165] initcall llc_init+0x0/0x17 returned 0 after 1 usecs
[ 0.853175] calling snap_init+0x0/0x2d @ 1
[ 0.853185] initcall snap_init+0x0/0x2d returned 0 after 1 usecs
[ 0.853195] calling rif_init+0x0/0x68 @ 1
[ 0.853228] initcall rif_init+0x0/0x68 returned 0 after 22 usecs
[ 0.853239] calling blackhole_module_init+0x0/0xa @ 1
[ 0.853251] initcall blackhole_module_init+0x0/0xa returned 0 after 1 usecs
[ 0.853261] calling init_cgroup_cls+0x0/0xa @ 1
[ 0.853271] initcall init_cgroup_cls+0x0/0xa returned 0 after 0 usecs
[ 0.853281] calling sysctl_ipv4_init+0x0/0x3b @ 1
[ 0.853565] initcall sysctl_ipv4_init+0x0/0x3b returned 0 after 266 usecs
[ 0.853576] calling init_syncookies+0x0/0x12 @ 1
[ 0.853647] initcall init_syncookies+0x0/0x12 returned 0 after 59 usecs
[ 0.853659] calling ipv4_netfilter_init+0x0/0xa @ 1
[ 0.853669] initcall ipv4_netfilter_init+0x0/0xa returned 0 after 1 usecs
[ 0.853679] calling cubictcp_register+0x0/0x6c @ 1
[ 0.853689] TCP cubic registered
[ 0.853698] initcall cubictcp_register+0x0/0x6c returned 0 after 8 usecs
[ 0.853708] calling inet6_init+0x0/0x28d @ 1
[ 0.853909] NET: Registered protocol family 10
[ 0.854428] lo: Disabled Privacy Extensions
[ 0.854814] initcall inet6_init+0x0/0x28d returned 0 after 1068 usecs
[ 0.854825] calling mip6_init+0x0/0xa2 @ 1
[ 0.854833] Mobile IPv6
[ 0.854842] initcall mip6_init+0x0/0xa2 returned 0 after 7 usecs
[ 0.854852] calling packet_init+0x0/0x35 @ 1
[ 0.854861] NET: Registered protocol family 17
[ 0.854876] initcall packet_init+0x0/0x35 returned 0 after 13 usecs
[ 0.854886] calling dcbnl_init+0x0/0x2b @ 1
[ 0.854896] initcall dcbnl_init+0x0/0x2b returned 0 after 0 usecs
[ 0.854907] calling mce_debugfs_init+0x0/0x31 @ 1
[ 0.854930] initcall mce_debugfs_init+0x0/0x31 returned 0 after 12 usecs
[ 0.854940] calling severities_debugfs_init+0x0/0x31 @ 1
[ 0.854953] initcall severities_debugfs_init+0x0/0x31 returned 0 after 2
usecs
[ 0.854965] calling hpet_insert_resource+0x0/0x1a @ 1
[ 0.854975] initcall hpet_insert_resource+0x0/0x1a returned 1 after 0 usecs
[ 0.854985] initcall hpet_insert_resource+0x0/0x1a returned with error code
1
[ 0.854997] calling update_mp_table+0x0/0x564 @ 1
[ 0.855008] initcall update_mp_table+0x0/0x564 returned 0 after 1 usecs
[ 0.855019] calling lapic_insert_resource+0x0/0x41 @ 1
[ 0.855029] initcall lapic_insert_resource+0x0/0x41 returned -1 after 0 usecs
[ 0.855041] initcall lapic_insert_resource+0x0/0x41 returned with error code
-1
[ 0.855052] calling print_ipi_mode+0x0/0x24 @ 1
[ 0.855060] Using IPI No-Shortcut mode
[ 0.855069] initcall print_ipi_mode+0x0/0x24 returned 0 after 7 usecs
[ 0.855079] calling init_lapic_nmi_sysfs+0x0/0x2d @ 1
[ 0.855089] initcall init_lapic_nmi_sysfs+0x0/0x2d returned 0 after 0 usecs
[ 0.855099] calling io_apic_bug_finalize+0x0/0x16 @ 1
[ 0.855109] initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 0 usecs
[ 0.855120] calling check_early_ioremap_leak+0x0/0x58 @ 1
[ 0.855130] initcall check_early_ioremap_leak+0x0/0x58 returned 0 after 1
usecs
[ 0.855141] calling pat_memtype_list_init+0x0/0x21 @ 1
[ 0.855155] initcall pat_memtype_list_init+0x0/0x21 returned 0 after 4 usecs
[ 0.855166] calling sched_init_debug+0x0/0x1d @ 1
[ 0.855179] initcall sched_init_debug+0x0/0x1d returned 0 after 2 usecs
[ 0.855192] calling init_oops_id+0x0/0x36 @ 1
[ 0.855209] initcall init_oops_id+0x0/0x36 returned 0 after 6 usecs
[ 0.855219] calling disable_boot_consoles+0x0/0x37 @ 1
[ 0.855230] initcall disable_boot_consoles+0x0/0x37 returned 0 after 0 usecs
[ 0.855242] calling pm_qos_power_init+0x0/0xa8 @ 1
[ 0.855359] initcall pm_qos_power_init+0x0/0xa8 returned 0 after 104 usecs
[ 0.855373] calling software_resume+0x0/0x1d1 @ 1
[ 0.855382] PM: Resume from disk failed.
[ 0.855391] initcall software_resume+0x0/0x1d1 returned -2 after 7 usecs
[ 0.855402] initcall software_resume+0x0/0x1d1 returned with error code -2
[ 0.855413] calling debugfs_kprobe_init+0x0/0x74 @ 1
[ 0.855431] initcall debugfs_kprobe_init+0x0/0x74 returned 0 after 7 usecs
[ 0.855442] calling taskstats_init+0x0/0x76 @ 1
[ 0.855461] registered taskstats version 1
[ 0.855477] initcall taskstats_init+0x0/0x76 returned 0 after 23 usecs
[ 0.855487] calling clear_boot_tracer+0x0/0x23 @ 1
[ 0.855497] initcall clear_boot_tracer+0x0/0x23 returned 0 after 0 usecs
[ 0.855508] calling max_swapfiles_check+0x0/0x3 @ 1
[ 0.855517] initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs
[ 0.855528] calling random32_reseed+0x0/0x84 @ 1
[ 0.855547] initcall random32_reseed+0x0/0x84 returned 0 after 9 usecs
[ 0.855557] calling pci_resource_alignment_sysfs_init+0x0/0xf @ 1
[ 0.855569] initcall pci_resource_alignment_sysfs_init+0x0/0xf returned 0
after 2 usecs
[ 0.855580] calling pci_sysfs_init+0x0/0x40 @ 1
[ 0.856271] initcall pci_sysfs_init+0x0/0x40 returned 0 after 663 usecs
[ 0.856282] calling boot_wait_for_devices+0x0/0x2b @ 1
[ 0.856294] initcall boot_wait_for_devices+0x0/0x2b returned 0 after 2 usecs
[ 0.856304] calling regulator_init_complete+0x0/0xe8 @ 1
[ 0.856315] initcall regulator_init_complete+0x0/0xe8 returned 0 after 0
usecs
[ 0.856325] calling seqgen_init+0x0/0xa @ 1
[ 0.856360] initcall seqgen_init+0x0/0xa returned 0 after 24 usecs
[ 0.856370] calling rtc_hctosys+0x0/0x11a @ 1
[ 0.856432] rtc_cmos 00:04: setting system clock to 2010-11-29 21:48:30 UTC
(1291067310)
[ 0.856445] initcall rtc_hctosys+0x0/0x11a returned 0 after 63 usecs
[ 0.856455] calling memmap_init+0x0/0x7e @ 1
[ 0.856529] initcall memmap_init+0x0/0x7e returned 0 after 62 usecs
[ 0.856540] calling pci_mmcfg_late_insert_resources+0x0/0x15f @ 1
[ 0.856552] initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned 1
after 0 usecs
[ 0.856563] initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned with
error code 1
[ 0.856575] calling init_net_drop_monitor+0x0/0x107 @ 1
[ 0.856583] Initalizing network drop monitor service
[ 0.856604] initcall init_net_drop_monitor+0x0/0x107 returned 0 after 18
usecs
[ 0.856616] calling tcp_congestion_default+0x0/0xa @ 1
[ 0.856627] initcall tcp_congestion_default+0x0/0xa returned 0 after 0 usecs
[ 0.856638] calling initialize_hashrnd+0x0/0x12 @ 1
[ 0.856654] initcall initialize_hashrnd+0x0/0x12 returned 0 after 6 usecs
[ 0.856674] async_waiting @ 1
[ 0.856682] async_continuing @ 1 after 0 usec
[ 0.856725] Freeing unused kernel memory: 396k freed
[ 0.858527] Write protecting the kernel text: 2592k
[ 0.859042] Write protecting the kernel read-only data: 924k
Loading, please wait...
[ 0.873691] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
[ 0.916310] udev[51]: starting version 164
[ 1.469749] calling usb_init+0x0/0x17a [usbcore] @ 76
[ 1.470384] usbcore: registered new interface driver usbfs
[ 1.470768] usbcore: registered new interface driver hub
[ 1.471173] usbcore: registered new device driver usb
[ 1.471197] initcall usb_init+0x0/0x17a [usbcore] returned 0 after 1386 usecs
[ 1.475468] calling ide_init+0x0/0x64 [ide_core] @ 80
[ 1.475481] Uniform Multi-Platform E-IDE driver
[ 1.476350] initcall ide_init+0x0/0x64 [ide_core] returned 0 after 838 usecs
[ 1.482705] calling ehci_hcd_init+0x0/0x65 [ehci_hcd] @ 74
[ 1.482720] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.483121] initcall ehci_hcd_init+0x0/0x65 [ehci_hcd] returned 0 after 388
usecs
[ 1.502389] calling e1000_init_module+0x0/0x6b [e1000] @ 125
[ 1.502404] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 1.502413] Copyright (c) 1999-2006 Intel Corporation.
[ 1.502484] xen: registering gsi 54 triggering 0 polarity 1
[ 1.502513] xen: --> irq=54
(XEN) IOAPIC[2]: Set PCI routing entry (4-6 -> 0x98 -> IRQ 54 Mode:1 Active:1)
[ 1.502540] e1000 0000:02:03.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
[ 1.509067] calling thermal_init+0x0/0x2e [thermal_sys] @ 102
[ 1.509109] initcall thermal_init+0x0/0x2e [thermal_sys] returned 0 after 24
usecs
[ 1.511663] calling init_scsi+0x0/0x73 [scsi_mod] @ 123
[ 1.512373] calling floppy_module_init+0x0/0xcca [floppy] @ 144
[ 1.512824] Floppy drive(s): fd0 is 1.44M
[ 1.513754] SCSI subsystem initialized
[ 1.513777] initcall init_scsi+0x0/0x73 [scsi_mod] returned 0 after 2038
usecs
[ 1.522056] calling spi_transport_init+0x0/0x60 [scsi_transport_spi] @ 174
[ 1.522439] initcall spi_transport_init+0x0/0x60 [scsi_transport_spi]
returned 0 after 355 usecs
[ 1.797510] e1000: 0000:02:03.0: e1000_probe: (PCI-X:133MHz:64-bit)
00:30:48:2d:3e:d2
[ 1.798450] calling piix_ide_init+0x0/0x9e [piix] @ 80
[ 1.798505] piix 0000:00:1f.1: IDE controller (0x8086:0x248b rev 0x02)
[ 1.798532] xen: registering gsi 18 triggering 0 polarity 1
[ 1.798559] xen: --> irq=18
(XEN) IOAPIC[0]: Set PCI routing entry (2-18 -> 0xa0 -> IRQ 18 Mode:1 Active:1)
[ 1.798587] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.798670] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 1.798689] ide0: BM-DMA at 0x2060-0x2067
[ 1.798735] ide1: BM-DMA at 0x2068-0x206f
[ 1.798763] Probing IDE interface ide0...
[ 1.808670] FDC 0 is a post-1991 82077
[ 1.808741] calling acpi_thermal_init+0x0/0x6b [thermal] @ 102
[ 1.808843] initcall acpi_thermal_init+0x0/0x6b [thermal] returned 0 after
86 usecs
[ 1.809858] initcall floppy_module_init+0x0/0xcca [floppy] returned 0 after
290494 usecs
[ 1.811223] calling uhci_hcd_init+0x0/0xa1 [uhci_hcd] @ 76
[ 1.811236] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.821578] calling ata_init+0x0/0x2bc [libata] @ 123
[ 1.821718] libata version 3.00 loaded.
[ 1.821738] initcall ata_init+0x0/0x2bc [libata] returned 0 after 132 usecs
[ 1.830157] calling ahd_linux_init+0x0/0x21d [aic79xx] @ 174
[ 1.830268] xen: registering gsi 28 triggering 0 polarity 1
[ 1.830296] xen: --> irq=28
(XEN) IOAPIC[1]: Set PCI routing entry (3-4 -> 0xa8 -> IRQ 28 Mode:1 Active:1)
[ 1.830324] aic79xx 0000:03:02.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 1.942247] calling mv_init+0x0/0x39 [sata_mv] @ 123
[ 1.971182] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 1.971240] sata_mv 0000:02:01.0: version 1.28
[ 1.971388] xen: registering gsi 48 triggering 0 polarity 1
[ 1.971414] xen: --> irq=48
(XEN) IOAPIC[2]: Set PCI routing entry (4-0 -> 0xb0 -> IRQ 48 Mode:1 Active:1)
[ 1.971439] sata_mv 0000:02:01.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
[ 1.972189] sata_mv 0000:02:01.0: Gen-II 32 slots 8 ports SCSI mode IRQ via
INTx
[ 1.977268] scsi1 : sata_mv
[ 1.977702] scsi2 : sata_mv
[ 1.978016] scsi3 : sata_mv
[ 1.978285] scsi4 : sata_mv
[ 1.978556] scsi5 : sata_mv
[ 1.978828] scsi6 : sata_mv
[ 1.979119] scsi7 : sata_mv
[ 1.979386] scsi8 : sata_mv
[ 1.979467] ata1: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc222000
irq 48
[ 1.979480] ata2: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc224000
irq 48
[ 1.979492] ata3: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc226000
irq 48
[ 1.979503] ata4: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc228000
irq 48
[ 1.979514] ata5: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc232000
irq 48
[ 1.979525] ata6: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc234000
irq 48
[ 1.979537] ata7: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc236000
irq 48
[ 1.979547] ata8: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc238000
irq 48
[ 1.979659] initcall mv_init+0x0/0x39 [sata_mv] returned 0 after 36514 usecs
[ 1.980120] xen: registering gsi 55 triggering 0 polarity 1
[ 1.980149] xen: --> irq=55
(XEN) IOAPIC[2]: Set PCI routing entry (4-7 -> 0xb8 -> IRQ 55 Mode:1 Active:1)
[ 1.980176] e1000 0000:02:03.1: PCI INT B -> GSI 55 (level, low) -> IRQ 55
[ 2.255949] e1000: 0000:02:03.1: e1000_probe: (PCI-X:133MHz:64-bit)
00:30:48:2d:3e:d3
[ 2.290340] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 2.290799] initcall e1000_init_module+0x0/0x6b [e1000] returned 0 after
769903 usecs
[ 2.520057] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.536095] ata1.00: ATA-8: Hitachi HDS721010CLA332, JP4OA39C, max UDMA/133
[ 2.536107] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.560098] ata1.00: configured for UDMA/133
[ 2.560296] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O
PQ: 0 ANSI: 5
[ 2.648096] Probing IDE interface ide1...
[ 3.036055] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.052072] ata2.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
[ 3.052087] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.076101] ata2.00: configured for UDMA/133
[ 3.076304] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O
PQ: 0 ANSI: 5
[ 3.384259] hdc: CD-224E, ATAPI CD/DVD-ROM drive
[ 3.396051] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.716048] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.036052] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.056200] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.056817] hdc: UDMA/33 mode selected
[ 4.057479] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.057509] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.057801] xen: registering gsi 16 triggering 0 polarity 1
[ 4.057828] xen: --> irq=16
(XEN) IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc0 -> IRQ 16 Mode:1 Active:1)
[ 4.057855] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.057881] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.057895] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.057937] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 4.058017] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002000
[ 4.058150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.058161] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.058171] usb usb1: Product: UHCI Host Controller
[ 4.058179] usb usb1: Manufacturer: Linux 2.6.32.25 uhci_hcd
[ 4.058188] usb usb1: SerialNumber: 0000:00:1d.0
[ 4.058491] usb usb1: configuration #1 chosen from 1 choice
[ 4.058672] hub 1-0:1.0: USB hub found
[ 4.058704] hub 1-0:1.0: 2 ports detected
[ 4.058815] xen: registering gsi 19 triggering 0 polarity 1
[ 4.058832] xen: --> irq=19
(XEN) IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc8 -> IRQ 19 Mode:1 Active:1)
[ 4.058850] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.058889] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.058903] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.058923] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 4.058994] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002020
[ 4.059300] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.059312] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.059323] usb usb2: Product: UHCI Host Controller
[ 4.059331] usb usb2: Manufacturer: Linux 2.6.32.25 uhci_hcd
[ 4.059340] usb usb2: SerialNumber: 0000:00:1d.1
[ 4.059638] usb usb2: configuration #1 chosen from 1 choice
[ 4.059818] hub 2-0:1.0: USB hub found
[ 4.059853] hub 2-0:1.0: 2 ports detected
[ 4.059966] xen: registering gsi 18 triggering 0 polarity 1
[ 4.059976] xen_allocate_pirq: returning irq 18 for gsi 18
[ 4.059984] xen: --> irq=18
[ 4.059994] Already setup the GSI :18
[ 4.060033] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.060056] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.060069] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.060088] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 4.060169] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[ 4.060280] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.060291] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 4.060300] usb usb3: Product: UHCI Host Controller
[ 4.060308] usb usb3: Manufacturer: Linux 2.6.32.25 uhci_hcd
[ 4.060317] usb usb3: SerialNumber: 0000:00:1d.2
[ 4.060616] usb usb3: configuration #1 chosen from 1 choice
[ 4.060796] hub 3-0:1.0: USB hub found
[ 4.060829] hub 3-0:1.0: 2 ports detected
[ 4.061717] initcall piix_ide_init+0x0/0x9e [piix] returned 0 after 2210200
usecs
[ 4.061754] initcall uhci_hcd_init+0x0/0xa1 [uhci_hcd] returned 0 after
2197765 usecs
[ 4.356054] ata6: SATA link down (SStatus 0 SControl 300)
[ 4.676046] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.996051] ata8: SATA link down (SStatus 0 SControl 300)
[ 5.019951] calling piix_init+0x0/0x23 [ata_piix] @ 80
[ 5.020466] initcall piix_init+0x0/0x23 [ata_piix] returned 0 after 480 usecs
[ 5.028143] calling ata_generic_init+0x0/0x14 [ata_generic] @ 80
[ 5.028686] initcall ata_generic_init+0x0/0x14 [ata_generic] returned 0
after 511 usecs
[ 5.044217] calling init_sd+0x0/0x127 [sd_mod] @ 212
[ 5.045049] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 5.045217] sd 1:0:0:0: [sda] Write Protect is off
[ 5.045227] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.045314] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.045702] sda:
[ 5.046043] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 5.046208] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.046219] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.046305] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 5.046695] sdb:initcall init_sd+0x0/0x127 [sd_mod] returned 0 after 2856
usecs
[ 5.047651] calling cdrom_init+0x0/0x57 [cdrom] @ 215
[ 5.047701] initcall cdrom_init+0x0/0x57 [cdrom] returned 0 after 36 usecs
[ 5.052555] sda1 sda2 sda3 sda4
[ 5.054126] sd 1:0:0:0: [sda] Attached SCSI disk
[ 5.056521] sdb1 sdb2 sdb3 sdb4
[ 5.058052] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 5.087313] calling ide_cdrom_init+0x0/0x15 [ide_cd_mod] @ 215
[ 5.087328] ide-cd driver 5.00
[ 5.088223] ide-cd: hdc: ATAPI 24X CD-ROM drive, 128kB Cache
[ 5.088246] Uniform CD-ROM driver Revision: 3.20
[ 5.101126] initcall ide_cdrom_init+0x0/0x15 [ide_cd_mod] returned 0 after
13465 usecs
[ 16.952045] scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 16.952048] <Adaptec AIC7902 Ultra320 SCSI adapter>
[ 16.952050] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X
101-133MHz, 512 SCBs
[ 16.953542] xen: registering gsi 29 triggering 0 polarity 1
[ 16.953573] xen: --> irq=29
(XEN) IOAPIC[1]: Set PCI routing entry (3-5 -> 0xd0 -> IRQ 29 Mode:1 Active:1)
[ 16.953619] aic79xx 0000:03:02.1: PCI INT B -> GSI 29 (level, low) -> IRQ 29
[ 32.072045] scsi9 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
[ 32.072048] <Adaptec AIC7902 Ultra320 SCSI adapter>
[ 32.072050] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X
101-133MHz, 512 SCBs
[ 32.072576] initcall ahd_linux_init+0x0/0x21d [aic79xx] returned 0 after
29533581 usecs
[ 32.104915] calling wait_scan_init+0x0/0x8 [scsi_wait_scan] @ 243
[ 32.104940] initcall wait_scan_init+0x0/0x8 [scsi_wait_scan] returned 0
after 2 usecs
[ 32.152885] calling md_init+0x0/0xb8 [md_mod] @ 253
[ 32.152954] initcall md_init+0x0/0xb8 [md_mod] returned 0 after 43 usecs
[ 32.157826] calling raid_init+0x0/0xa [raid1] @ 253
[ 32.157840] md: raid1 personality registered for level 1
[ 32.157851] initcall raid_init+0x0/0xa [raid1] returned 0 after 10 usecs
[ 32.182576] md: md0 stopped.
[ 32.191189] md: bind<sdb1>
[ 32.191451] md: bind<sda1>
[ 32.202265] raid1: raid set md0 active with 2 out of 2 mirrors
[ 32.202324] md0: detected capacity change from 0 to 501612544
[ 32.210037] md0: unknown partition table
[ 32.253114] md: md1 stopped.
[ 32.281010] md: bind<sdb2>
[ 32.282500] md: bind<sda2>
[ 32.291019] raid1: raid set md1 active with 2 out of 2 mirrors
[ 32.291074] md1: detected capacity change from 0 to 1003356160
[ 32.299078] md1: unknown partition table
[ 32.328157] md: md2 stopped.
[ 32.349857] md: bind<sdb3>
[ 32.351615] md: bind<sda3>
[ 32.359928] raid1: raid set md2 active with 2 out of 2 mirrors
[ 32.359983] md2: detected capacity change from 0 to 29997465600
[ 32.367088] md2: unknown partition table
[ 32.394669] md: md3 stopped.
[ 32.401785] md: bind<sdb4>
[ 32.402018] md: bind<sda4>
[ 32.414223] raid1: raid set md3 active with 2 out of 2 mirrors
[ 32.414278] md3: detected capacity change from 0 to 968699346944
[ 32.418718] md3: unknown partition table
[ 32.446597] calling dm_init+0x0/0x37 [dm_mod] @ 285
[ 32.447543] device-mapper: uevent: version 1.0.3
[ 32.448987] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@xxxxxxxxxx
[ 32.449011] initcall dm_init+0x0/0x37 [dm_mod] returned 0 after 2329 usecs
[ 32.633088] calling dm_crypt_init+0x0/0x54 [dm_crypt] @ 293
[ 32.633150] initcall dm_crypt_init+0x0/0x54 [dm_crypt] returned 0 after 38
usecs
[ 43.190271] calling crypto_module_init+0x0/0xa [xts] @ 305
[ 43.190294] initcall crypto_module_init+0x0/0xa [xts] returned 0 after 2
usecs
[ 43.194756] calling serpent_mod_init+0x0/0x2f [serpent] @ 307
[ 43.195017] initcall serpent_mod_init+0x0/0x2f [serpent] returned 0 after
238 usecs
[ 43.205683] alg: No test for xts(serpent) (xts(serpent-generic))
[ 43.845763] calling init_mbcache+0x0/0xd [mbcache] @ 356
[ 43.845786] initcall init_mbcache+0x0/0xd [mbcache] returned 0 after 1 usecs
[ 43.854319] calling journal_init+0x0/0x81 [jbd] @ 356
[ 43.855632] initcall journal_init+0x0/0x81 [jbd] returned 0 after 1263 usecs
[ 43.865996] calling init_ext3_fs+0x0/0x5e [ext3] @ 356
[ 43.866543] initcall init_ext3_fs+0x0/0x5e [ext3] returned 0 after 514 usecs
[ 43.878309] kjournald starting. Commit interval 5 seconds
[ 43.878338] EXT3-fs: mounted filesystem with ordered data mode.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd.
[ 45.180065] udev[407]: starting version 164
Synthesizing the initial hotplug events...done.
[ 45.558603] calling pci_hotplug_init+0x0/0x3b [pci_hotplug] @ 418
[ 45.558623] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 45.558637] initcall pci_hotplug_init+0x0/0x3b [pci_hotplug] returned 0
after 9 usecs
Waiting for /dev to be fully populated...[ 45.677246] calling
xen_acpi_processor_extcntl_init+0x0/0x45 [acpi_processor] @ 439
[ 45.677270] initcall xen_acpi_processor_extcntl_init+0x0/0x45
[acpi_processor] returned 0 after 0 usecs
[ 45.678360] calling shpcd_init+0x0/0x4d [shpchp] @ 440
[ 45.678522] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 45.678536] initcall shpcd_init+0x0/0x4d [shpchp] returned 0 after 156 usecs
[ 45.687638] calling edac_init+0x0/0xa1 [edac_core] @ 420
[ 45.687652] EDAC MC: Ver: 2.1.0 Nov 20 2010
[ 45.701934] initcall edac_init+0x0/0xa1 [edac_core] returned 0 after 13934
usecs
[ 45.728113] calling evdev_init+0x0/0xa [evdev] @ 453
[ 45.728220] initcall evdev_init+0x0/0xa [evdev] returned 0 after 88 usecs
[ 45.736361] calling acpi_button_init+0x0/0x46 [button] @ 434
[ 45.737451] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input1
[ 45.737698] ACPI: Power Button [PWRB]
[ 45.737876] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 45.737995] ACPI: Power Button [PWRF]
[ 45.738048] initcall acpi_button_init+0x0/0x46 [button] returned 0 after
1629 usecs
[ 45.790680] calling e7xxx_init+0x0/0x27 [e7xxx_edac] @ 420
[ 45.791056] EDAC e7xxx: tolm = f8000, remapbase = 200000, remaplimit = 208000
[ 45.791803] EDAC MC0: Giving out device to 'e7xxx_edac' 'E7501': DEV
0000:00:00.0
[ 45.792836] EDAC PCI0: Giving out device to module 'e7xxx_edac' controller
'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 45.793273] initcall e7xxx_init+0x0/0x27 [e7xxx_edac] returned 0 after 2508
usecs
[ 45.808533] calling acpi_container_init+0x0/0x3b [container] @ 498
[ 45.821653] initcall acpi_container_init+0x0/0x3b [container] returned 0
after 12790 usecs
[ 45.874309] calling pcspkr_init+0x0/0xa [pcspkr] @ 468
[ 45.874464] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 45.874589] initcall pcspkr_init+0x0/0xa [pcspkr] returned 0 after 252 usecs
[ 45.878271] calling acpi_processor_init+0x0/0x10b [processor] @ 438
[ 45.878975] initcall acpi_processor_init+0x0/0x10b [processor] returned 0
after 666 usecs
[ 45.905126] calling i2c_init+0x0/0x56 [i2c_core] @ 449
[ 45.905706] initcall i2c_init+0x0/0x56 [i2c_core] returned 0 after 546 usecs
[ 45.983507] calling mod_init+0x0/0x1d8 [intel_rng] @ 441
[ 45.985058] calling i2c_i801_init+0x0/0xa2 [i2c_i801] @ 449
[ 45.985186] xen: registering gsi 17 triggering 0 polarity 1
[ 45.985213] xen: --> irq=17
(XEN) IOAPIC[0]: Set PCI routing entry (2-17 -> 0xd8 -> IRQ 17 Mode:1 Active:1)
[ 45.985240] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 45.985353] initcall i2c_i801_init+0x0/0xa2 [i2c_i801] returned 0 after 273
usecs
[ 45.988793] Intel 82802 RNG detected
[ 45.988921] initcall mod_init+0x0/0x1d8 [intel_rng] returned 0 after 5260
usecs
[ 45.996982] calling snd_mem_init+0x0/0x22 [snd_page_alloc] @ 468
[ 45.997015] initcall snd_mem_init+0x0/0x22 [snd_page_alloc] returned 0 after
14 usecs
[ 46.135985] calling init_tis+0x0/0x80 [tpm_tis] @ 508
[ 46.136016] initcall init_tis+0x0/0x80 [tpm_tis] returned 0 after 40 usecs
[ 46.143516] calling init_soundcore+0x0/0x81 [soundcore] @ 468
[ 46.143560] initcall init_soundcore+0x0/0x81 [soundcore] returned 0 after 26
usecs
[ 46.234332] calling alsa_sound_init+0x0/0x78 [snd] @ 468
[ 46.234385] initcall alsa_sound_init+0x0/0x78 [snd] returned 0 after 27 usecs
[ 46.288719] calling alsa_timer_init+0x0/0x122 [snd_timer] @ 468
[ 46.292198] initcall alsa_timer_init+0x0/0x122 [snd_timer] returned 0 after
3370 usecs
[ 46.328226] calling alsa_pcm_init+0x0/0x4c [snd_pcm] @ 468
[ 46.328262] initcall alsa_pcm_init+0x0/0x4c [snd_pcm] returned 0 after 11
usecs
[ 46.359566] calling pcsp_init+0x0/0x19 [snd_pcsp] @ 468
[ 46.359588] Error: Driver 'pcspkr' is already registered, aborting...
[ 46.359601] initcall pcsp_init+0x0/0x19 [snd_pcsp] returned -16 after 14
usecs
[ 46.359614] initcall pcsp_init+0x0/0x19 [snd_pcsp] returned with error code
-16
done.
Generating udev events for MD arrays...done.
Checking root file system...fsck from util-linux-ng 2.17.2
/dev/mapper/quelea0-root has been mounted 31 times without being checked, check
forced.
/dev/mapper/quelea0-root: 34286/152608 files (8.9% non-contiguous),
245915/610304 blocks
done.
[ 79.382414] EXT3 FS on dm-1, internal journal
Starting early crypto disks...md1_crypt (starting)...
md3_crypt (starting)...
Unlocking the disk /dev/md3 (md3_crypt)
Enter passphrase:
done.
Cleaning up ifupdown....
Setting up networking....
[ 131.983413] calling loop_init+0x0/0x163 [loop] @ 1286
[ 131.992489] loop: module loaded
[ 131.992515] initcall loop_init+0x0/0x163 [loop] returned 0 after 8862 usecs
Loading kernel modules...done.
Setting up LVM Volume Groups Reading all physical volumes. This may take a
while...
Found volume group "quelea1" using metadata type lvm2
Found volume group "quelea0" using metadata type lvm2
2 logical volume(s) in volume group "quelea1" now active
3 logical volume(s) in volume group "quelea0" now active
.
Starting remaining crypto disks...done.
Activating lvm and md swap...[ 133.082875] Adding 979832k swap on
/dev/mapper/md1_crypt. Priority:-1 extents:1 across:979832k
done.
Checking file systems...fsck from util-linux-ng 2.17.2
/dev/md0: clean, 242/122880 files, 81112/489856 blocks
/dev/mapper/quelea0-usr: clean, 84735/305216 files, 465679/1220608 blocks
/dev/mapper/quelea0-var: clean, 4280/305216 files, 322199/1220608 blocks
done.
Mounting local filesystems...[ 134.086702] kjournald starting. Commit
interval 5 seconds
[ 134.164390] EXT3 FS on md0, internal journal
[ 134.164409] EXT3-fs: mounted filesystem with ordered data mode.
[ 134.212404] kjournald starting. Commit interval 5 seconds
[ 134.212869] EXT3 FS on dm-2, internal journal
[ 134.212883] EXT3-fs: mounted filesystem with ordered data mode.
[ 134.244395] kjournald starting. Commit interval 5 seconds
[ 134.244872] EXT3 FS on dm-3, internal journal
[ 134.244886] EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...done.
Cleaning up temporary files....
Configuring network interfaces...[ 135.113663] ADDRCONF(NETDEV_UP): eth1: link
is not ready
[ 135.116395] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
RX
[ 135.116687] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
done.
Cleaning up temporary files....
Setting console screen modes and fonts.
[ 135.367012] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 135.368386] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 135.369400] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
cannot (un)set powersave mode
Setting kernel variables ...done.
Running scripts in rcS.d/ took 91 seconds.
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
[ 135.768562] calling xenfs_init+0x0/0x53 [xenfs] @ 1637
[ 135.768599] initcall xenfs_init+0x0/0x53 [xenfs] returned 0 after 14 usecs
[ 135.787692] calling evtchn_init+0x0/0x59 [xen_evtchn] @ 1644
[ 135.788500] Event-channel device installed.
[ 135.788516] initcall evtchn_init+0x0/0x59 [xen_evtchn] returned 0 after 780
usecs
Starting enhanced syslogd: rsyslogd.
[ 136.016115] XENBUS: Unable to read cpu state
Starting periodic command scheduler: cron.
Starting system message bus: dbus.
Starting MD monitoring service: mdadm --monitor.
Starting puppet agent
puppet not configured to start, please edit /etc/default/puppet to enable
.
Starting OpenBSD Secure Shell server: sshd.
Starting Xen daemons: xenfs xenstored xenconsoled xend[ 138.434856] calling
br_init+0x0/0xae [bridge] @ 1755
[ 138.435005] Bridge firewalling registered
[ 138.435025] initcall br_init+0x0/0xae [bridge] returned 0 after 141 usecs
.
Running scripts in rc2.d/ took 5 seconds.
Debian GNU/Linux squeeze/sid quelea hvc0
quelea login:
Here are the interrupts, in case you are curious:
quelea:~# cat /proc/interrupts
CPU0
1: 8 xen-pirq-ioapic-edge i8042
6: 3 xen-pirq-ioapic-edge floppy
8: 0 xen-pirq-ioapic-edge rtc0
9: 0 xen-pirq-ioapic-edge acpi
14: 0 xen-pirq-ioapic-edge ide0
15: 95 xen-pirq-ioapic-edge ide1
16: 0 xen-pirq-ioapic-level uhci_hcd:usb1
18: 0 xen-pirq-ioapic-level uhci_hcd:usb3
19: 0 xen-pirq-ioapic-level uhci_hcd:usb2
28: 15 xen-pirq-ioapic-level aic79xx
29: 15 xen-pirq-ioapic-level aic79xx
48: 10039 xen-pirq-ioapic-level sata_mv
54: 1776 xen-pirq-ioapic-level eth0
55: 198 xen-pirq-ioapic-level eth1
1526: 0 xen-dyn-event evtchn:xenstored
1527: 125 xen-dyn-event evtchn:xenstored
1528: 43 xen-percpu-virq hvc_console
1529: 0 xen-percpu-virq pcpu
1530: 91 xen-dyn-event xenbus
1531: 0 xen-percpu-ipi callfuncsingle0
1532: 0 xen-percpu-virq debug0
1533: 0 xen-percpu-ipi callfunc0
1534: 0 xen-percpu-ipi resched0
1535: 19375 xen-percpu-virq timer0
NMI: 0 Non-maskable interrupts
LOC: 0 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
PND: 0 Performance pending work
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 2 Machine check polls
ERR: 0
MIS: 0
(XEN) *** Serial input -> Xen (type 'CTRL-a' three times to switch input to
DOM0)
[ 437.472015] eth1: no IPv6 routers present
[ 438.468016] eth0: no IPv6 routers present
(XEN) '*' pressed -> firing all diagnostic keyhandlers
(XEN) [d: dump registers]
(XEN) 'd' pressed -> dumping registers
(XEN)
(XEN) *** Dumping CPU0 host state: ***
(XEN) ----[ Xen-4.0.2-rc1-pre x86_32p debug=n Not tainted ]----
(XEN) CPU: 0
(XEN) EIP: e008:[<ff10e8b4>] __dump_execstate+0x4/0x60
(XEN) EFLAGS: 00010286 CONTEXT: hypervisor
(XEN) eax: ff1fb724 ebx: 00000064 ecx: 00000000 edx: 00000000
(XEN) esi: ff32bfb4 edi: ff32bf78 ebp: ff12daf0 esp: ff32bde4
(XEN) cr0: 8005003b cr4: 000006f0 cr3: 00bd2ca0 cr2: df4c9800
(XEN) ds: e010 es: e010 fs: 00d8 gs: 00e0 ss: e010 cs: e008
(XEN) Xen stack trace from esp=ff32bde4:
(XEN) 00000008 00000282 00000000 ff33df62 00000064 ff32bfb4 00000064 ff10e963
(XEN) 00000000 00000000 00000000 ff33df54 00000064 00000065 ff1fb32c ff10de50
(XEN) 00000064 ff32bf78 ff1e5416 8c2735e5 ff1fb38c 0000002a ff32bf78 ff10deea
(XEN) 0000002a ff32bf78 00000000 00000000 ff1fb760 ff1fb7b8 00000296 ff12dadf
(XEN) 0000002a ff32bf78 000000fc 8b5844a0 ff35868c ff1fb760 ff1fb7b8 ff12ef20
(XEN) 0000002a ff32bf78 00000000 ff358f48 ff1149b7 ff339070 8c2735e5 2a000296
(XEN) 00000000 8b5844a0 00000068 ff33e400 ff1fb760 ff32bf78 00000001 ff12e594
(XEN) ff1fb760 ff32bf78 ff35868c ff358f48 ff115dc5 ff35868c 8b5844a0 00000000
(XEN) ffb80280 ff33e420 ff32bf48 ff14e882 00000004 ff1fb760 ff32bf78 88bd603d
(XEN) 00000068 8b5844a0 00000068 ff227180 ff140aad ffbd2044 00000001 00000003
(XEN) 00000068 ff32bf78 00000004 ff358f48 ff11c9f2 00000000 ffb8029c 88bdd058
(XEN) 00006641 00000000 00000292 8b5907f0 00000068 ff358f48 ff227180 ff32bfb4
(XEN) 0000e010 0000e010 ff32bee4 ff1479d2 ff32bf78 ff32bfb4 00000000 00000000
(XEN) ff227b00 ff32bfb4 ff32bee4 ffffffff 00f10000 ff144152 0000e008 00000286
(XEN) ff145d56 ffbfa000 ffbd2000 ffffffff 00000001 00000000 00000000 00000000
(XEN) c13aad38 00000000 00000000 00c80000 c10023a7 00000061 00000246 c1371f8c
(XEN) 00000069 0000007b 0000007b 000000d8 000000e0 00000000 ffbfa000
(XEN) Xen call trace:
(XEN) [<ff10e8b4>] __dump_execstate+0x4/0x60
(XEN) [<ff10e963>] dump_registers+0x53/0x110
(XEN) [<ff10de50>] run_all_keyhandlers+0x70/0x90
(XEN) [<ff10deea>] handle_keypress+0x7a/0xc0
(XEN) [<ff12dadf>] __serial_rx+0x5f/0x70
(XEN) [<ff12ef20>] serial_rx_interrupt+0x60/0xd0
(XEN) [<ff1149b7>] csched_acct+0x387/0x430
(XEN) [<ff12e594>] ns16550_interrupt+0x64/0xb0
(XEN) [<ff115dc5>] csched_tick+0x1a5/0x240
(XEN) [<ff14e882>] do_IRQ+0x412/0x5a0
(XEN) [<ff140aad>] reprogram_timer+0x8d/0xe0
(XEN) [<ff11c9f2>] timer_softirq_action+0x1a2/0x3d0
(XEN) [<ff1479d2>] common_interrupt+0x52/0x60
(XEN) [<ff144152>] default_idle+0x32/0x40
(XEN) [<ff145d56>] idle_loop+0x26/0x70
(XEN)
(XEN) *** Dumping CPU0 guest state: ***
(XEN) No guest context (CPU is idle).
(XEN)
(XEN) *** Dumping CPU1 host state: ***
(XEN) ----[ Xen-4.0.2-rc1-pre x86_32p debug=n Not tainted ]----
(XEN) CPU: 1
(XEN) EIP: e008:[<ff10e8b4>] __dump_execstate+0x4/0x60
(XEN) EFLAGS: 00010086 CONTEXT: hypervisor
(XEN) eax: 00000001 ebx: 00000000 ecx: ff10e8b0 edx: ffffffff
(XEN) esi: 00000000 edi: 0000e010 ebp: ff34a300 esp: ff377f24
(XEN) cr0: 8005003b cr4: 000006f0 cr3: 00100120 cr2: 00000000
(XEN) ds: e010 es: e010 fs: e010 gs: e010 ss: e010 cs: e008
(XEN) Xen stack trace from esp=ff377f24:
(XEN) 00000068 ff229100 ff227180 ff358f90 ff11c9f2 ff229100 00000000 ff15f89d
(XEN) 00000000 0000e010 ffffff4f 9a82144b 00000068 ff358f90 ff2279c0 ff15ff32
(XEN) ff22910c ff377fb4 0000e010 ff1401f7 ff377f78 ff377fb4 00000000 00000000
(XEN) ff227b00 ff377fb4 ff34a300 ffffffff 00fb0000 ff144152 0000e008 00000286
(XEN) ff145d56 00000001 ff377fb4 00002000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000001 ffbf2000
(XEN) Xen call trace:
(XEN) [<ff10e8b4>] __dump_execstate+0x4/0x60
(XEN) [<ff11c9f2>] timer_softirq_action+0x1a2/0x3d0
(XEN) [<ff15f89d>] __smp_call_function_interrupt+0x7d/0x90
(XEN) [<ff15ff32>] smp_call_function_interrupt+0x42/0x70
(XEN) [<ff1401f7>] call_function_interrupt+0x57/0x60
(XEN) [<ff144152>] default_idle+0x32/0x40
(XEN) [<ff145d56>] idle_loop+0x26/0x70
(XEN)
(XEN) *** Dumping CPU1 guest state: ***
(XEN) No guest context (CPU is idle).
(XEN)
(XEN) *** Dumping CPU2 host state: ***
(XEN) ----[ Xen-4.0.2-rc1-pre x86_32p debug=n Not tainted ]----
(XEN) CPU: 2
(XEN) EIP: e008:[<ff10e8b4>] __dump_execstate+0x4/0x60
(XEN) EFLAGS: 00010086 CONTEXT: hypervisor
(XEN) eax: 00000001 ebx: 00000000 ecx: ff10e8b0 edx: ffffffff
(XEN) esi: 00000000 edi: 0000e010 ebp: ff34a400 esp: ff373f24
(XEN) cr0: 8005003b cr4: 000006f0 cr3: 00100120 cr2: 00000000
(XEN) ds: e010 es: e010 fs: e010 gs: e010 ss: e010 cs: e008
(XEN) Xen stack trace from esp=ff373f24:
(XEN) 00000068 ff22b100 ff227180 ff238ed8 ff11c9f2 ff22b100 00000000 ff15f89d
(XEN) 00000000 0000e010 ffffff3e a2895a87 00000068 ff238ed8 ff2279c0 ff15ff32
(XEN) ff22b10c ff373fb4 0000e010 ff1401f7 ff373f78 ff373fb4 00000000 00000000
(XEN) ff227b00 ff373fb4 ff34a400 ffffffff 00fb0000 ff144152 0000e008 00000286
(XEN) ff145d56 00000002 ff373fb4 00004000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000002 ffbf0000
(XEN) Xen call trace:
(XEN) [<ff10e8b4>] __dump_execstate+0x4/0x60
(XEN) [<ff11c9f2>] timer_softirq_action+0x1a2/0x3d0
(XEN) [<ff15f89d>] __smp_call_function_interrupt+0x7d/0x90
(XEN) [<ff15ff32>] smp_call_function_interrupt+0x42/0x70
(XEN) [<ff1401f7>] call_function_interrupt+0x57/0x60
(XEN) [<ff144152>] default_idle+0x32/0x40
(XEN) [<ff145d56>] idle_loop+0x26/0x70
(XEN)
(XEN) *** Dumping CPU2 guest state: ***
(XEN) No guest context (CPU is idle).
(XEN)
(XEN) *** Dumping CPU3 host state: ***
(XEN) ----[ Xen-4.0.2-rc1-pre x86_32p debug=n Not tainted ]----
(XEN) CPU: 3
(XEN) EIP: e008:[<ff10e8b4>] __dump_execstate+0x4/0x60
(XEN) EFLAGS: 00010086 CONTEXT: hypervisor
(XEN) eax: 00000001 ebx: 00000000 ecx: ff10e8b0 edx: ffffffff
(XEN) esi: 00000000 edi: 0000e010 ebp: ff34a500 esp: ff36bf24
(XEN) cr0: 8005003b cr4: 000006f0 cr3: 00100120 cr2: 00000000
(XEN) ds: e010 es: e010 fs: e010 gs: e010 ss: e010 cs: e008
(XEN) Xen stack trace from esp=ff36bf24:
(XEN) 00000068 ff22d100 ff227180 ff238f20 ff11c9f2 ff22d100 00000000 ff15f89d
(XEN) 00000000 0000e010 ffffff76 aac608ff 00000068 ff238f20 ff2279c0 ff15ff32
(XEN) ff22d10c ff36bfb4 0000e010 ff1401f7 ff36bf78 ff36bfb4 00000000 00000000
(XEN) ff227b00 ff36bfb4 ff34a500 ffffffff 00fb0000 ff144152 0000e008 00000286
(XEN) ff145d56 00000003 ff36bfb4 00006000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000003 ff36e000
(XEN) Xen call trace:
(XEN) [<ff10e8b4>] __dump_execstate+0x4/0x60
(XEN) [<ff11c9f2>] timer_softirq_action+0x1a2/0x3d0
(XEN) [<ff15f89d>] __smp_call_function_interrupt+0x7d/0x90
(XEN) [<ff15ff32>] smp_call_function_interrupt+0x42/0x70
(XEN) [<ff1401f7>] call_function_interrupt+0x57/0x60
(XEN) [<ff144152>] default_idle+0x32/0x40
(XEN) [<ff145d56>] idle_loop+0x26/0x70
(XEN)
(XEN) *** Dumping CPU3 guest state: ***
(XEN) No guest context (CPU is idle).
(XEN)
(XEN) [0: dump Dom0 registers]
(XEN) '0' pressed -> dumping Dom0's registers
(XEN) *** Dumping Dom0 vcpu#0 state: ***
(XEN) ----[ Xen-4.0.2-rc1-pre x86_32p debug=n Not tainted ]----
(XEN) CPU: 0
(XEN) EIP: 0061:[<c10023a7>]
(XEN) EFLAGS: 00000246 EM: 0 CONTEXT: pv guest
(XEN) eax: 00000000 ebx: 00000001 ecx: 00000000 edx: 00000000
(XEN) esi: 00000000 edi: c13aad38 ebp: 00000000 esp: c1371f8c
(XEN) cr0: 8005003b cr4: 000006f0 cr3: 00bd2ca0 cr2: 08b008a8
(XEN) ds: 007b es: 007b fs: 00d8 gs: 00e0 ss: 0069 cs: 0061
(XEN) Guest stack trace from esp=c1371f8c:
(XEN) c10062ae c13dd234 00000000 c13aad38 c100410f c10082d7 8e8afd0c 00000005
(XEN) 90f22974 c95e2944 c1411dc8 c1410a68 c13e0811 a5610e1c 00000003 4e43e83e
(XEN) f40b38a6 c1411dc8 0166c000 c13e22e0 00000001 c1409044 1fc9d3f5 80000400
(XEN) 0002080b 00000f25 00000000 c2e89000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
(XEN) [H: dump heap info]
(XEN) 'H' pressed -> dumping heap info (now-0x68:B2DD3710)
(XEN) heap[node=0][zone=0] -> 2198 pages
(XEN) heap[node=0][zone=1] -> 0 pages
(XEN) heap[node=0][zone=2] -> 0 pages
(XEN) heap[node=0][zone=3] -> 0 pages
(XEN) heap[node=0][zone=4] -> 0 pages
(XEN) heap[node=0][zone=5] -> 0 pages
(XEN) heap[node=0][zone=6] -> 0 pages
(XEN) heap[node=0][zone=7] -> 0 pages
(XEN) heap[node=0][zone=8] -> 0 pages
(XEN) heap[node=0][zone=9] -> 0 pages
(XEN) heap[node=0][zone=10] -> 0 pages
(XEN) heap[node=0][zone=11] -> 0 pages
(XEN) heap[node=0][zone=12] -> 0 pages
(XEN) heap[node=0][zone=13] -> 0 pages
(XEN) heap[node=0][zone=14] -> 13304 pages
(XEN) heap[node=0][zone=15] -> 32768 pages
(XEN) heap[node=0][zone=16] -> 65536 pages
(XEN) heap[node=0][zone=17] -> 115672 pages
(XEN) heap[node=0][zone=18] -> 262144 pages
(XEN) heap[node=0][zone=19] -> 491090 pages
(XEN) heap[node=0][zone=20] -> 967310 pages
(XEN) heap[node=0][zone=21] -> 0 pages
(XEN) heap[node=0][zone=22] -> 0 pages
(XEN) heap[node=0][zone=23] -> 0 pages
(XEN) heap[node=0][zone=24] -> 0 pages
(XEN) heap[node=0][zone=25] -> 0 pages
(XEN) heap[node=0][zone=26] -> 0 pages
(XEN) heap[node=0][zone=27] -> 0 pages
(XEN) heap[node=0][zone=28] -> 0 pages
(XEN) heap[node=0][zone=29] -> 0 pages
(XEN) heap[node=0][zone=30] -> 0 pages
(XEN) heap[node=0][zone=31] -> 0 pages
(XEN) [M: dump MSI state]
(XEN) PCI-MSI interrupt information:
(XEN) [Q: dump PCI devices]
(XEN) ==== PCI devices ====
(XEN) 04:01.0 - dom 0 - MSIs < >
(XEN) 03:02.1 - dom 0 - MSIs < >
(XEN) 03:02.0 - dom 0 - MSIs < >
(XEN) 02:03.1 - dom 0 - MSIs < >
(XEN) 02:03.0 - dom 0 - MSIs < >
(XEN) 02:01.0 - dom 0 - MSIs < >
(XEN) 01:1f.0 - dom 0 - MSIs < >
(XEN) 01:1e.0 - dom 0 - MSIs < >
(XEN) 01:1d.0 - dom 0 - MSIs < >
(XEN) 01:1c.0 - dom 0 - MSIs < >
(XEN) 00:1f.3 - dom 0 - MSIs < >
(XEN) 00:1f.1 - dom 0 - MSIs < >
(XEN) 00:1f.0 - dom 0 - MSIs < >
(XEN) 00:1e.0 - dom 0 - MSIs < >
(XEN) 00:1d.2 - dom 0 - MSIs < >
(XEN) 00:1d.1 - dom 0 - MSIs < >
(XEN) 00:1d.0 - dom 0 - MSIs < >
(XEN) 00:02.0 - dom 0 - MSIs < >
(XEN) 00:00.1 - dom 0 - MSIs < >
(XEN) 00:00.0 - dom 0 - MSIs < >
(XEN) [a: dump timer queues]
(XEN) Dumping timer queues:
(XEN) CPU00:
(XEN) ex= 9530us timer=ff35868c cb=ff115c20(00000000) csched_tick+0x0/0x240
(XEN) ex= 29529us timer=ff339070 cb=ff114630(00000000) csched_acct+0x0/0x430
(XEN) ex= 29533us timer=ff227090 cb=ff1184e0(00000000) s_timer_fn+0x0/0x20
(XEN) ex= 7291691us timer=ff3554e0 cb=ff187460(00000000) mce_work_fn+0x0/0x120
(XEN) ex= 292970us timer=ff353300 cb=ff164190(00000000)
time_calibration+0x0/0x60
(XEN) ex= 1235361us timer=ff3533c0 cb=ff163cf0(00000000)
plt_overflow+0x0/0x3e0
(XEN) ex= 532us timer=ff2646b4 cb=ff14dfb0(ffb81b80)
irq_guest_eoi_timer_fn+0x0/0x140
(XEN) CPU01:
(XEN) ex= 9536us timer=ff358bec cb=ff115c20(00000001) csched_tick+0x0/0x240
(XEN) CPU02:
(XEN) ex= 9184us timer=ff358c5c cb=ff115c20(00000002) csched_tick+0x0/0x240
(XEN) CPU03:
(XEN) ex= 8830us timer=ff358ccc cb=ff115c20(00000003) csched_tick+0x0/0x240
(XEN) [c: dump ACPI Cx structures]
(XEN) 'c' pressed -> printing ACPI Cx structures
(XEN) [e: dump evtchn info]
(XEN) 'e' pressed -> dumping event-channel info
(XEN) Event channel information for domain 0:
(XEN) Polling vCPUs: {}
(XEN) port [p/m]
(XEN) 1 [1/0]: s=5 n=0 v=0 x=0
(XEN) 2 [0/0]: s=6 n=0 x=0
(XEN) 3 [0/0]: s=6 n=0 x=0
(XEN) 4 [0/0]: s=5 n=0 v=1 x=0
(XEN) 5 [0/0]: s=6 n=0 x=0
(XEN) 6 [0/0]: s=3 n=0 d=0 p=22 x=0
(XEN) 7 [0/0]: s=5 n=0 v=9 x=0
(XEN) 8 [0/0]: s=4 n=0 p=9 x=0
(XEN) 9 [0/0]: s=5 n=0 v=2 x=0
(XEN) 10 [0/0]: s=4 n=0 p=1 x=0
(XEN) 11 [0/0]: s=4 n=0 p=8 x=0
(XEN) 12 [0/0]: s=4 n=0 p=6 x=0
(XEN) 13 [0/0]: s=4 n=0 p=16 x=0
(XEN) 14 [0/0]: s=4 n=0 p=19 x=0
(XEN) 15 [0/0]: s=4 n=0 p=18 x=0
(XEN) 16 [0/0]: s=4 n=0 p=28 x=0
(XEN) 17 [0/0]: s=4 n=0 p=48 x=0
(XEN) 18 [0/0]: s=4 n=0 p=14 x=0
(XEN) 19 [0/0]: s=4 n=0 p=15 x=0
(XEN) 20 [0/0]: s=4 n=0 p=29 x=0
(XEN) 21 [0/0]: s=4 n=0 p=55 x=0
(XEN) 22 [0/0]: s=3 n=0 d=0 p=6 x=0
(XEN) 23 [0/0]: s=5 n=0 v=3 x=0
(XEN) 24 [1/0]: s=4 n=0 p=54 x=0
(XEN) [g: print grant table usage]
(XEN) gnttab_usage_print_all [ key 'g' pressed
(XEN) -------- active -------- -------- shared --------
(XEN) [ref] localdom mfn pin localdom gmfn flags
(XEN) grant-table for remote domain: 0 ... no active grant table entries
(XEN) gnttab_usage_print_all ] done
(XEN) [i: dump interrupt bindings]
(XEN) Guest interrupt information:
(XEN) IRQ: 0 affinity:00000000,00000000,00000000,00000001 vec:f0
type=IO-APIC-edge status=00000000 mapped, unbound
(XEN) IRQ: 1 affinity:00000000,00000000,00000000,00000001 vec:28
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 1(-S--),
(XEN) IRQ: 2 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:e2
type=XT-PIC status=00000000 mapped, unbound
(XEN) IRQ: 3 affinity:00000000,00000000,00000000,0000000f vec:30
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 4 affinity:00000000,00000000,00000000,00000001 vec:f1
type=IO-APIC-edge status=00000000 mapped, unbound
(XEN) IRQ: 5 affinity:00000000,00000000,00000000,00000001 vec:38
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 6 affinity:00000000,00000000,00000000,00000001 vec:40
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 6(-S--),
(XEN) IRQ: 7 affinity:00000000,00000000,00000000,00000001 vec:48
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 8 affinity:00000000,00000000,00000000,00000001 vec:50
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 8(-S--),
(XEN) IRQ: 9 affinity:00000000,00000000,00000000,00000001 vec:58
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 9(-S--),
(XEN) IRQ: 10 affinity:00000000,00000000,00000000,00000001 vec:60
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 11 affinity:00000000,00000000,00000000,00000001 vec:68
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 12 affinity:00000000,00000000,00000000,00000001 vec:70
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 13 affinity:00000000,00000000,00000000,0000000f vec:78
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 14 affinity:00000000,00000000,00000000,00000001 vec:88
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 14(-S--),
(XEN) IRQ: 15 affinity:00000000,00000000,00000000,00000001 vec:90
type=IO-APIC-edge status=00000014 in-flight=0 domain-list=0: 15(-S--),
(XEN) IRQ: 16 affinity:00000000,00000000,00000000,00000001 vec:a0
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 16(-S--),
(XEN) IRQ: 17 affinity:00000000,00000000,00000000,0000000f vec:d8
type=IO-APIC-level status=00000002 mapped, unbound
(XEN) IRQ: 18 affinity:00000000,00000000,00000000,00000001 vec:b0
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 18(-S--),
(XEN) IRQ: 19 affinity:00000000,00000000,00000000,00000001 vec:a8
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 19(-S--),
(XEN) IRQ: 28 affinity:00000000,00000000,00000000,00000001 vec:b8
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 28(-S--),
(XEN) IRQ: 29 affinity:00000000,00000000,00000000,00000001 vec:d0
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 29(-S--),
(XEN) IRQ: 48 affinity:00000000,00000000,00000000,00000001 vec:c0
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 48(-S--),
(XEN) IRQ: 54 affinity:00000000,00000000,00000000,00000001 vec:98
type=IO-APIC-level status=00000010 in-flight=1 domain-list=0: 54(PS-M),
(XEN) IRQ: 55 affinity:00000000,00000000,00000000,00000001 vec:c8
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 55(-S--),
(XEN) IO-APIC interrupt information:
(XEN) IRQ 0 Vec240:
(XEN) Apic 0x00, Pin 2: vector=240, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 1 Vec 40:
(XEN) Apic 0x00, Pin 1: vector=40, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 3 Vec 48:
(XEN) Apic 0x00, Pin 3: vector=48, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=1, dest_id:15
(XEN) IRQ 4 Vec241:
(XEN) Apic 0x00, Pin 4: vector=241, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 5 Vec 56:
(XEN) Apic 0x00, Pin 5: vector=56, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 6 Vec 64:
(XEN) Apic 0x00, Pin 6: vector=64, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 7 Vec 72:
(XEN) Apic 0x00, Pin 7: vector=72, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 8 Vec 80:
(XEN) Apic 0x00, Pin 8: vector=80, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 9 Vec 88:
(XEN) Apic 0x00, Pin 9: vector=88, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=level, mask=0, dest_id:1
(XEN) IRQ 10 Vec 96:
(XEN) Apic 0x00, Pin 10: vector=96, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 11 Vec104:
(XEN) Apic 0x00, Pin 11: vector=104, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 12 Vec112:
(XEN) Apic 0x00, Pin 12: vector=112, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 13 Vec120:
(XEN) Apic 0x00, Pin 13: vector=120, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=1, dest_id:15
(XEN) IRQ 14 Vec136:
(XEN) Apic 0x00, Pin 14: vector=136, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 15 Vec144:
(XEN) Apic 0x00, Pin 15: vector=144, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 16 Vec160:
(XEN) Apic 0x00, Pin 16: vector=160, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
(XEN) IRQ 17 Vec216:
(XEN) Apic 0x00, Pin 17: vector=216, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:15
(XEN) IRQ 18 Vec176:
(XEN) Apic 0x00, Pin 18: vector=176, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
(XEN) IRQ 19 Vec168:
(XEN) Apic 0x00, Pin 19: vector=168, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
(XEN) IRQ 28 Vec184:
(XEN) Apic 0x01, Pin 4: vector=184, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
(XEN) IRQ 29 Vec208:
(XEN) Apic 0x01, Pin 5: vector=208, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
(XEN) IRQ 48 Vec192:
(XEN) Apic 0x02, Pin 0: vector=192, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
(XEN) IRQ 54 Vec152:
(XEN) Apic 0x02, Pin 6: vector=152, delivery_mode=1, dest_mode=logical,
delivery_status=1, polarity=1, irr=1, trigger=level, mask=0, dest_id:1
(XEN) IRQ 55 Vec200:
(XEN) Apic 0x02, Pin 7: vector=200, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
(XEN) [m: memory info]
(XEN) Physical memory information:
(XEN) Xen heap: 8792kB free
(XEN) heap[14]: 53216kB free
(XEN) heap[15]: 131072kB free
(XEN) heap[16]: 262144kB free
(XEN) heap[17]: 462688kB free
(XEN) heap[18]: 1048576kB free
(XEN) heap[19]: 1964360kB free
(XEN) heap[20]: 3869240kB free
(XEN) Dom heap: 7791296kB free
(XEN) [n: NMI statistics]
(XEN) CPU NMI
(XEN) 0 0
(XEN) 1 0
(XEN) 2 0
(XEN) 3 0
(XEN) 4 0
(XEN) 5 0
(XEN) 6 0
(XEN) 7 0
(XEN) 8 0
(XEN) 9 0
(XEN) 10 0
(XEN) 11 0
(XEN) 12 0
(XEN) 13 0
(XEN) 14 0
(XEN) 15 0
(XEN) 16 0
(XEN) 17 0
(XEN) 18 0
(XEN) 19 0
(XEN) 20 0
(XEN) 21 0
(XEN) 22 0
(XEN) 23 0
(XEN) 24 0
(XEN) 25 0
(XEN) 26 0
(XEN) 27 0
(XEN) 28 0
(XEN) 29 0
(XEN) 30 0
(XEN) 31 0
(XEN) 32 0
(XEN) 33 0
(XEN) 34 0
(XEN) 35 0
(XEN) 36 0
(XEN) 37 0
(XEN) 38 0
(XEN) 39 0
(XEN) 40 0
(XEN) 41 0
(XEN) 42 0
(XEN) 43 0
(XEN) 44 0
(XEN) 45 0
(XEN) 46 0
(XEN) 47 0
(XEN) 48 0
(XEN) 49 0
(XEN) 50 0
(XEN) 51 0
(XEN) 52 0
(XEN) 53 0
(XEN) 54 0
(XEN) 55 0
(XEN) 56 0
(XEN) 57 0
(XEN) 58 0
(XEN) 59 0
(XEN) 60 0
(XEN) 61 0
(XEN) 62 0
(XEN) 63 0
(XEN) 64 0
(XEN) 65 0
(XEN) 66 0
(XEN) 67 0
(XEN) 68 0
(XEN) 69 0
(XEN) 70 0
(XEN) 71 0
(XEN) 72 0
(XEN) 73 0
(XEN) 74 0
(XEN) 75 0
(XEN) 76 0
(XEN) 77 0
(XEN) 78 0
(XEN) 79 0
(XEN) 80 0
(XEN) 81 0
(XEN) 82 0
(XEN) 83 0
(XEN) 84 0
(XEN) 85 0
(XEN) 86 0
(XEN) 87 0
(XEN) 88 0
(XEN) 89 0
(XEN) 90 0
(XEN) 91 0
(XEN) 92 0
(XEN) 93 0
(XEN) 94 0
(XEN) 95 0
(XEN) 96 0
(XEN) 97 0
(XEN) 98 0
(XEN) 99 0
(XEN) 100 0
(XEN) 101 0
(XEN) 102 0
(XEN) 103 0
(XEN) 104 0
(XEN) 105 0
(XEN) 106 0
(XEN) 107 0
(XEN) 108 0
(XEN) 109 0
(XEN) 110 0
(XEN) 111 0
(XEN) 112 0
(XEN) 113 0
(XEN) 114 0
(XEN) 115 0
(XEN) 116 0
(XEN) 117 0
(XEN) 118 0
(XEN) 119 0
(XEN) 120 0
(XEN) 121 0
(XEN) 122 0
(XEN) 123 0
(XEN) 124 0
(XEN) 125 0
(XEN) 126 0
(XEN) 127 0
(XEN) dom0 vcpu0: NMI neither pending nor masked
(XEN) [q: dump domain (and guest debug) info]
(XEN) 'q' pressed -> dumping domain info (now=0x68:B6BD7FB8)
(XEN) General information for domain 0:
(XEN) refcnt=3 dying=0 nr_pages=131072 xenheap_pages=5 dirty_cpus={0}
max_pages=4294967295
(XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=0000000d
(XEN) Rangesets belonging to domain 0:
(XEN) I/O Ports { 0-1f, 22-3f, 44-60, 62-9f, a2-3f7, 400-cfb, d00-1007,
100c-ffff }
(XEN) Interrupts { 0-327 }
(XEN) I/O Memory { 0-febff, fec01-fec7f, fec81-fedff, fee01-ffffffff }
(XEN) Memory pages belonging to domain 0:
(XEN) DomPage list too long to display
(XEN) XenPage 00000256: caf=80000002, taf=74000002
(XEN) XenPage 00000258: caf=80000001, taf=74000001
(XEN) XenPage 0000025a: caf=80000001, taf=74000001
(XEN) XenPage 0000025c: caf=80000001, taf=74000001
(XEN) XenPage 00000260: caf=80000002, taf=74000002
(XEN) VCPU information and callbacks for domain 0:
(XEN) VCPU0: CPU0 [has=T] flags=0 poll=0 upcall_pend = 01, upcall_mask = 00
dirty_cpus={0} cpu_affinity={0-127}
(XEN) No periodic timer
(XEN) Notifying guest 0:0 (virq 1, port 4, stat 0/0/-1)
(XEN) [r: dump run queues]
(XEN) Scheduler: SMP Credit Scheduler (credit)
(XEN) info:
(XEN) ncpus = 4
(XEN) master = 0
(XEN) credit = 1200
(XEN) credit balance = 0
(XEN) weight = 0
(XEN) runq_sort = 930
(XEN) default-weight = 256
(XEN) msecs per tick = 10ms
(XEN) credits per msec = 10
(XEN) ticks per tslice = 3
(XEN) ticks per acct = 3
(XEN) migration delay = 0us
(XEN) idlers: 00000000,00000000,00000000,0000000e
(XEN) active vcpus:
(XEN) sched_smt_power_savings: disabled
(XEN) NOW=0x00000068BCB0ABEA
(XEN) CPU[00] sort=930, sibling=00000000,00000000,00000000,00000005,
core=00000000,00000000,00000000,00000005
(XEN) run: [0.0] pri=0 flags=0 cpu=0 credit=-42 [w=256]
(XEN) 1: [32767.0] pri=-64 flags=0 cpu=0
(XEN) CPU[01] sort=930, sibling=00000000,00000000,00000000,0000000a,
core=00000000,00000000,00000000,0000000a
(XEN) run: [32767.1] pri=-64 flags=0 cpu=1
(XEN) CPU[02] sort=930, sibling=00000000,00000000,00000000,00000005,
core=00000000,00000000,00000000,00000005
(XEN) run: [32767.2] pri=-64 flags=0 cpu=2
(XEN) CPU[03] sort=930, sibling=00000000,00000000,00000000,0000000a,
core=00000000,00000000,00000000,0000000a
(XEN) run: [32767.3] pri=-64 flags=0 cpu=3
(XEN) [s: dump softtsc stats]
(XEN) TSC not marked as either constant or reliable, warp=892 (count=1)
(XEN) No domains have emulated TSC
(XEN) [t: display multi-cpu clock info]
(XEN) Synced stime skew: max=192ns avg=192ns samples=1 current=192ns
(XEN) Synced cycles skew: max=1920 avg=1920 samples=1 current=1920
(XEN) [u: dump numa info]
(XEN) 'u' pressed -> dumping numa info (now-0x68:C639FF12)
(XEN) idx0 -> NODE0 start->0 size->2129920
(XEN) phys_to_nid(0000000000001000) -> 0 should be 0
(XEN) CPU0 -> NODE0
(XEN) CPU1 -> NODE0
(XEN) CPU2 -> NODE0
(XEN) CPU3 -> NODE0
(XEN) Memory location of each domain:
(XEN) Domain 0 (total: 131072):
(XEN) Node 0: 131072
(XEN) [z: print ioapic info]
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #2 registers: 24.
(XEN) number of IO-APIC #3 registers: 24.
(XEN) number of IO-APIC #4 registers: 24.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #2......
(XEN) .... register #00: 02008000
(XEN) ....... : physical APIC id: 02
(XEN) ....... : Delivery Type: 1
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 001 01 0 0 0 0 0 1 1 28
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 00F 0F 1 0 0 0 0 1 1 30
(XEN) 04 001 01 0 0 0 0 0 1 1 F1
(XEN) 05 001 01 0 0 0 0 0 1 1 38
(XEN) 06 001 01 0 0 0 0 0 1 1 40
(XEN) 07 001 01 0 0 0 0 0 1 1 48
(XEN) 08 001 01 0 0 0 0 0 1 1 50
(XEN) 09 001 01 0 1 0 0 0 1 1 58
(XEN) 0a 001 01 0 0 0 0 0 1 1 60
(XEN) 0b 001 01 0 0 0 0 0 1 1 68
(XEN) 0c 001 01 0 0 0 0 0 1 1 70
(XEN) 0d 00F 0F 1 0 0 0 0 1 1 78
(XEN) 0e 001 01 0 0 0 0 0 1 1 88
(XEN) 0f 001 01 0 0 0 0 0 1 1 90
(XEN) 10 001 01 0 1 0 1 0 1 1 A0
(XEN) 11 00F 0F 1 1 0 1 0 1 1 D8
(XEN) 12 001 01 0 1 0 1 0 1 1 B0
(XEN) 13 001 01 0 1 0 1 0 1 1 A8
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #3......
(XEN) .... register #00: 03000000
(XEN) ....... : physical APIC id: 03
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 03000000
(XEN) ....... : arbitration: 03
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 001 01 0 1 0 1 0 1 1 B8
(XEN) 05 001 01 0 1 0 1 0 1 1 D0
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #4......
(XEN) .... register #00: 04000000
(XEN) ....... : physical APIC id: 04
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178020
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0020
(XEN) .... register #02: 04000000
(XEN) ....... : arbitration: 04
(XEN) .... register #03: 00000001
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 001 01 0 1 0 1 0 1 1 C0
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 001 01 0 1 1 1 1 1 1 98
(XEN) 07 001 01 0 1 0 1 0 1 1 C8
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ40 -> 0:1
(XEN) IRQ48 -> 0:3
(XEN) IRQ241 -> 0:4
(XEN) IRQ56 -> 0:5
(XEN) IRQ64 -> 0:6
(XEN) IRQ72 -> 0:7
(XEN) IRQ80 -> 0:8
(XEN) IRQ88 -> 0:9
(XEN) IRQ96 -> 0:10
(XEN) IRQ104 -> 0:11
(XEN) IRQ112 -> 0:12
(XEN) IRQ120 -> 0:13
(XEN) IRQ136 -> 0:14
(XEN) IRQ144 -> 0:15
(XEN) IRQ160 -> 0:16
(XEN) IRQ216 -> 0:17
(XEN) IRQ176 -> 0:18
(XEN) IRQ168 -> 0:19
(XEN) IRQ184 -> 1:4
(XEN) IRQ208 -> 1:5
(XEN) IRQ192 -> 2:0
(XEN) IRQ152 -> 2:6
(XEN) IRQ200 -> 2:7
(XEN) .................................... done.
--- ACPI_off 2010-11-29 18:29:46.000000000 -0500
+++ ACPI_on 2010-11-29 18:29:45.000000000 -0500
@@ -4,17 +4,18 @@
(XEN) Command line: placeholder dom0_mem=512M dom0_max_vcpus=1 lapic=debug
apic_verbosity=debug apic=debug loglvl=all guest_loglvl=all console=com1
com1=115200,8n1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
-(XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds
-(XEN) EDID info not retrieved because no DDC retrieval method detected
+(XEN) VBE/DDC methods: V2; EDID transfer time: 2 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f800 (usable)
(XEN) 000000000009f800 - 00000000000a0000 (reserved)
+(XEN) 00000000000d2000 - 00000000000d4000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
-(XEN) 0000000000100000 - 00000000f7ef9000 (usable)
-(XEN) 00000000f7ef9000 - 00000000f7f00000 (ACPI NVS)
+(XEN) 0000000000100000 - 00000000f7ef0000 (usable)
+(XEN) 00000000f7ef0000 - 00000000f7ef8000 (ACPI data)
+(XEN) 00000000f7ef8000 - 00000000f7f00000 (ACPI NVS)
(XEN) 00000000f7f00000 - 00000000f7f80000 (usable)
(XEN) 00000000f7f80000 - 00000000f8000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
@@ -22,33 +23,57 @@
(XEN) 00000000ff800000 - 00000000ffc00000 (reserved)
(XEN) 00000000fff00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000208000000 (usable)
-(XEN) System RAM: 8191MB (8387680kB)
-(XEN) ACPI Error (tbxfroot-0220): A valid RSDP was not found [20070126]
+(XEN) System RAM: 8191MB (8387644kB)
+(XEN) ACPI: RSDP 000F6D00, 0014 (r0 PTLTD )
+(XEN) ACPI: RSDT F7EF44E5, 0034 (r1 PTLTD RSDT 6040000 LTP 0)
+(XEN) ACPI: FACP F7EF7E78, 0074 (r1 INTEL K_CANYON 6040000 PTL 8)
+(XEN) ACPI: DSDT F7EF4519, 395F (r1 INTEL PLUMAS 6040000 MSFT 100000E)
+(XEN) ACPI: FACS F7EF8FC0, 0040
+(XEN) ACPI: APIC F7EF7EEC, 009C (r1 PTLTD APIC 6040000 LTP 0)
+(XEN) ACPI: BOOT F7EF7F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
+(XEN) ACPI: SPCR F7EF7FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000208000000
-(XEN) Xen heap: 8MB (8856kB)
+(XEN) Xen heap: 8MB (8852kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f6ca0
(XEN) DMI present.
(XEN) Using APIC driver default
-(XEN) Intel MultiProcessor Specification v1.4
-(XEN) Virtual Wire compatibility mode.
-(XEN) OEM ID: Product ID: Kings Canyon APIC at: 0xFEE00000
+(XEN) ACPI: PM-Timer IO Port: 0x1008
+(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[1004,0], pm1x_evt[1000,0]
+(XEN) ACPI: wakeup_vec[f7ef8fcc], vec_size[20]
+(XEN) ACPI: Local APIC address 0xfee00000
+(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:2 APIC version 20
+(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
(XEN) Processor #6 15:2 APIC version 20
+(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:2 APIC version 20
+(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
(XEN) Processor #7 15:2 APIC version 20
-(XEN) I/O APIC #2 Version 32 at 0xFEC00000.
-(XEN) I/O APIC #3 Version 32 at 0xFEC80000.
-(XEN) I/O APIC #4 Version 32 at 0xFEC80400.
+(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
+(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
+(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
+(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
+(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
+(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
+(XEN) ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
+(XEN) IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
+(XEN) ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
+(XEN) IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71
+(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
+(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
+(XEN) ACPI: IRQ0 used by override.
+(XEN) ACPI: IRQ2 used by override.
+(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
-(XEN) Processors: 4
+(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to fff7e000 (fee00000)
(XEN) mapped IOAPIC to fff7d000 (fec00000)
(XEN) mapped IOAPIC to fff7c000 (fec80000)
(XEN) mapped IOAPIC to fff7b000 (fec80400)
(XEN) Using scheduler: SMP Credit Scheduler (credit)
-(XEN) Detected 3199.125 MHz processor.
+(XEN) Detected 3199.175 MHz processor.
(XEN) CPU0: Intel Extended MCE MSRs (12) available
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
@@ -65,13 +90,12 @@
(XEN) masked ExtINT on CPU#3
(XEN) CPU3: Intel Extended MCE MSRs (12) available
(XEN) Total of 4 processors activated.
-(XEN) ExtINT not setup in hardware but reported by MP table
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
-(XEN) IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-17, 2-20, 2-21, 2-22, 2-23,
3-0, 3-1, 3-2, 3-3, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15,
3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-1, 4-2, 4-3, 4-4, 4-5, 4-8,
4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21,
4-22, 4-23 not connected.
-(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
-(XEN) number of MP IRQ sources: 23.
+(XEN) IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22,
2-23, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13,
3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-0, 4-1, 4-2, 4-3,
4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17,
4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected.
+(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
+(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #2 registers: 24.
(XEN) number of IO-APIC #3 registers: 24.
(XEN) number of IO-APIC #4 registers: 24.
@@ -100,17 +124,17 @@
(XEN) 06 001 01 0 0 0 0 0 1 1 40
(XEN) 07 001 01 0 0 0 0 0 1 1 48
(XEN) 08 001 01 0 0 0 0 0 1 1 50
-(XEN) 09 001 01 0 0 0 0 0 1 1 58
-(XEN) 0a 000 00 1 0 0 0 0 0 0 00
-(XEN) 0b 000 00 1 0 0 0 0 0 0 00
-(XEN) 0c 001 01 0 0 0 0 0 1 1 60
-(XEN) 0d 001 01 0 0 0 0 0 1 1 68
-(XEN) 0e 001 01 0 0 0 0 0 1 1 70
-(XEN) 0f 001 01 0 0 0 0 0 1 1 78
-(XEN) 10 001 01 1 1 0 1 0 1 1 88
+(XEN) 09 001 01 1 1 0 0 0 1 1 58
+(XEN) 0a 001 01 0 0 0 0 0 1 1 60
+(XEN) 0b 001 01 0 0 0 0 0 1 1 68
+(XEN) 0c 001 01 0 0 0 0 0 1 1 70
+(XEN) 0d 001 01 0 0 0 0 0 1 1 78
+(XEN) 0e 001 01 0 0 0 0 0 1 1 88
+(XEN) 0f 001 01 0 0 0 0 0 1 1 90
+(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
-(XEN) 12 001 01 1 1 0 1 0 1 1 90
-(XEN) 13 001 01 1 1 0 1 0 1 1 98
+(XEN) 12 000 00 1 0 0 0 0 0 0 00
+(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
@@ -134,8 +158,8 @@
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
-(XEN) 04 001 01 1 1 0 1 0 1 1 A0
-(XEN) 05 001 01 1 1 0 1 0 1 1 A8
+(XEN) 04 000 00 1 0 0 0 0 0 0 00
+(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
@@ -169,14 +193,14 @@
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
-(XEN) 00 001 01 1 1 0 1 0 1 1 B0
+(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
-(XEN) 06 001 01 1 1 0 1 0 1 1 B8
-(XEN) 07 001 01 1 1 0 1 0 1 1 C0
+(XEN) 06 000 00 1 0 0 0 0 0 0 00
+(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
@@ -204,31 +228,26 @@
(XEN) IRQ72 -> 0:7
(XEN) IRQ80 -> 0:8
(XEN) IRQ88 -> 0:9
-(XEN) IRQ96 -> 0:12
-(XEN) IRQ104 -> 0:13
-(XEN) IRQ112 -> 0:14
-(XEN) IRQ120 -> 0:15
-(XEN) IRQ136 -> 0:16
-(XEN) IRQ144 -> 0:18
-(XEN) IRQ152 -> 0:19
-(XEN) IRQ160 -> 1:4
-(XEN) IRQ168 -> 1:5
-(XEN) IRQ176 -> 2:0
-(XEN) IRQ184 -> 2:6
-(XEN) IRQ192 -> 2:7
+(XEN) IRQ96 -> 0:10
+(XEN) IRQ104 -> 0:11
+(XEN) IRQ112 -> 0:12
+(XEN) IRQ120 -> 0:13
+(XEN) IRQ136 -> 0:14
+(XEN) IRQ144 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
-(XEN) ..... CPU clock speed is 3199.1281 MHz.
-(XEN) ..... host bus clock speed is 133.2968 MHz.
-(XEN) ..... bus_scale = 0x0000887F
+(XEN) ..... CPU clock speed is 3199.1631 MHz.
+(XEN) ..... host bus clock speed is 133.2983 MHz.
+(XEN) ..... bus_scale = 0x00008883
(XEN) checking TSC synchronization across 4 CPUs: passed.
-(XEN) Platform timer is 1.193MHz PIT
+(XEN) Platform timer is 3.579MHz ACPI PM Timer
ÿ(XEN) Allocated console ring of 32 KiB.
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) Brought up 4 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
+(XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
@@ -274,26 +293,35 @@
Xen: 0000000000000000 - 000000000009f800 (usable)
Xen: 000000000009f800 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 0000000020000000 (usable)
- Xen: 00000000f7ef9000 - 00000000f7f00000 (ACPI NVS)
+ Xen: 00000000f7ef0000 - 00000000f7ef8000 (ACPI data)
+ Xen: 00000000f7ef8000 - 00000000f7f00000 (ACPI NVS)
Xen: 00000000f7f80000 - 00000000f8000000 (reserved)
Xen: 00000000fec00000 - 00000000fec10000 (reserved)
Xen: 00000000fec80000 - 00000000fec81000 (reserved)
Xen: 00000000fee00000 - 00000000fee01000 (reserved)
Xen: 00000000ff800000 - 00000000ffc00000 (reserved)
Xen: 00000000fff00000 - 0000000100000000 (reserved)
- Xen: 0000000208000000 - 00000002dfef9000 (usable)
+ Xen: 0000000208000000 - 00000002dfef0000 (usable)
bootconsole [xenboot0] enabled
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
-last_pfn = 0x2dfef9 max_arch_pfn = 0x1000000
+last_pfn = 0x2dfef0 max_arch_pfn = 0x1000000
x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
initial memory mapped : 0 - 037ff000
init_memory_mapping: 0000000000000000-000000002cffe000
0000000000 - 002cffe000 page 4k
kernel direct mapping tables up to 2cffe000 @ 100000-26d000
RAMDISK: 0166c000 - 02e09000
-ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
+ACPI: RSDP 000f6d00 00014 (v00 PTLTD )
+ACPI: RSDT f7ef44e5 00034 (v01 PTLTD RSDT 06040000 LTP 00000000)
+ACPI: FACP f7ef7e78 00074 (v01 INTEL K_CANYON 06040000 PTL 00000008)
+ACPI: DSDT f7ef4519 0395F (v01 INTEL PLUMAS 06040000 MSFT 0100000E)
+ACPI: FACS f7ef8fc0 00040
+ACPI: APIC f7ef7eec 0009C (v01 PTLTD ? APIC 06040000 LTP 00000000)
+ACPI: BOOT f7ef7f88 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
+ACPI: SPCR f7ef7fb0 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
+ACPI: Local APIC address 0xfee00000
11054MB HIGHMEM available.
719MB LOWMEM available.
mapped low ram: 0 - 2cffe000
@@ -308,7 +336,7 @@
#4 [0001000000 - 00014fb8b4] TEXT DATA BSS ==> [0001000000 - 00014fb8b4]
#5 [000166c000 - 0002e09000] RAMDISK ==> [000166c000 - 0002e09000]
#6 [0002e09000 - 0002e8a000] XEN START INFO ==> [0002e09000 - 0002e8a000]
- #7 [0208000000 - 02dfef9000] XEN EXTRA
+ #7 [0208000000 - 02dfef0000] XEN EXTRA
#8 [00014fc000 - 0001509114] BRK ==> [00014fc000 - 0001509114]
#9 [0000100000 - 000024f000] PGTABLE ==> [0000100000 - 000024f000]
#10 [0000010000 - 0000016000] BOOTMAP ==> [0000010000 - 0000016000]
@@ -316,13 +344,13 @@
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0002cffe
- HighMem 0x0002cffe -> 0x002dfef9
+ HighMem 0x0002cffe -> 0x002dfef0
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x00020000
- 0: 0x00208000 -> 0x002dfef9
-On node 0 totalpages: 1015432
+ 0: 0x00208000 -> 0x002dfef0
+On node 0 totalpages: 1015423
free_area_init_node: node 0, pgdat c13d5b00, node_mem_map c2ea7200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
@@ -330,32 +358,43 @@
Normal zone: 1408 pages used for memmap
Normal zone: 125568 pages, LIFO batch:31
HighMem zone: 22110 pages used for memmap
- HighMem zone: 862363 pages, LIFO batch:31
+ HighMem zone: 862354 pages, LIFO batch:31
Using APIC driver default
-SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
-Intel MultiProcessor Specification v1.4
- Virtual Wire compatibility mode.
-MPTABLE: OEM ID:
-MPTABLE: Product ID: Kings Canyon
-MPTABLE: APIC at: 0xFEE00000
-I/O APIC #2 Version 32 at 0xFEC00000.
-I/O APIC #3 Version 32 at 0xFEC80000.
-I/O APIC #4 Version 32 at 0xFEC80400.
-Processors: 1
+ACPI: PM-Timer IO Port: 0x1008
+ACPI: Local APIC address 0xfee00000
+ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
+ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
+ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
+ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
+ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
+ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
+ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
+ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
+ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
+IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0
+ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
+IOAPIC[1]: apic_id 3, version 0, address 0xfec80000, GSI 24-24
+ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
+IOAPIC[2]: apic_id 4, version 0, address 0xfec80400, GSI 48-48
+ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
+ERROR: Unable to locate IOAPIC for GSI 2
+ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
+ERROR: Unable to locate IOAPIC for GSI 9
+Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
-nr_irqs_gsi: 16
+nr_irqs_gsi: 304
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
-PM: Registered nosave memory: 0000000020000000 - 00000000f7ef9000
-PM: Registered nosave memory: 00000000f7ef9000 - 00000000f7f00000
-Allocating PCI resources starting at 20000000 (gap: 20000000:d7ef9000)
+PM: Registered nosave memory: 0000000020000000 - 00000000f7ef0000
+PM: Registered nosave memory: 00000000f7ef0000 - 00000000f7ef8000
+Allocating PCI resources starting at 20000000 (gap: 20000000:d7ef0000)
Booting paravirtualized kernel on Xen
Xen version: 4.0.2-rc1-pre (preserve-AD) (dom0)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
-PERCPU: Embedded 15 pages/cpu @c8ab9000 s37656 r0 d23784 u65536
+PERCPU: Embedded 15 pages/cpu @c8aba000 s37656 r0 d23784 u65536
pcpu-alloc: s37656 r0 d23784 u65536 alloc=16*4096
pcpu-alloc: [0] 0
-Built 1 zonelists in Zone order, mobility grouping on. Total pages: 991882
+Built 1 zonelists in Zone order, mobility grouping on. Total pages: 991873
Kernel command line: placeholder root=/dev/mapper/quelea0-root ro console=hvc0
earlyprintk=xen nomodeset initcall_debug debug loglevel=10
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
@@ -363,12 +402,12 @@
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
-DMA: Placing 64MB software IO TLB between c8b29000 - ccb29000
-DMA: software IO TLB at phys 0x8b29000 - 0xcb29000
-xen_swiotlb_fixup: buf=c8b29000 size=67108864
-xen_swiotlb_fixup: buf=ccb89000 size=32768
-Initializing HighMem for node 0 (0002cffe:002dfef9)
-Memory: 331632k/12057572k available (2588k kernel code, 192012k reserved,
1377k data, 396k init, 3537892k highmem)
+DMA: Placing 64MB software IO TLB between c8b2c000 - ccb2c000
+DMA: software IO TLB at phys 0x8b2c000 - 0xcb2c000
+xen_swiotlb_fixup: buf=c8b2c000 size=67108864
+xen_swiotlb_fixup: buf=ccb8c000 size=32768
+Initializing HighMem for node 0 (0002cffe:002dfef0)
+Memory: 331632k/12057536k available (2588k kernel code, 192024k reserved,
1377k data, 396k init, 3537856k highmem)
virtual kernel memory layout:
fixmap : 0xf5556000 - 0xf57ff000 (2724 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
@@ -382,6 +421,7 @@
NR_IRQS:1536
xen: --> irq=0
xen: --> irq=1
+xen: --> irq=2
xen: --> irq=3
xen: --> irq=4
xen: --> irq=5
@@ -389,10 +429,20 @@
xen: --> irq=7
xen: --> irq=8
xen: --> irq=9
+xen: --> irq=10
+xen: --> irq=11
xen: --> irq=12
xen: --> irq=13
xen: --> irq=14
xen: --> irq=15
+ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
+ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
+xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1
+xen: registering gsi 9 triggering 0 polarity 0
+xen_allocate_pirq: returning irq 9 for gsi 9
+xen: --> irq=9
+: Set PCI routing entry (2-9 -> 0x58 -> IRQ 9 Mode:1 Active:0)
+xen: acpi sci 9
Console: colour VGA+ 80x25
console [hvc0] enabled, bootconsole disabled
console [hvc0] enabled, bootconsole disabled
@@ -416,6 +466,7 @@
Performance Events: no PMU driver, software events only.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 13k freed
+ACPI: Core revision 20090903
calling migration_init+0x0/0x43 @ 1
initcall migration_init+0x0/0x43 returned 0 after 0 usecs
calling spawn_ksoftirqd+0x0/0x43 @ 1
@@ -456,7 +507,7 @@
calling ksysfs_init+0x0/0x92 @ 1
initcall ksysfs_init+0x0/0x92 returned 0 after 0 usecs
calling async_init+0x0/0x4a @ 1
-initcall async_init+0x0/0x4a returned 0 after 3906 usecs
+initcall async_init+0x0/0x4a returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0xa @ 1
initcall init_jiffies_clocksource+0x0/0xa returned 0 after 0 usecs
calling pm_init+0x0/0x4b @ 1
@@ -531,6 +582,7 @@
calling ffh_cstate_init+0x0/0x23 @ 1
initcall ffh_cstate_init+0x0/0x23 returned 0 after 0 usecs
calling acpi_pci_init+0x0/0x4d @ 1
+ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x4d returned 0 after 0 usecs
calling xen_pcpu_init+0x0/0x8e @ 1
sync cpu 0 get result 1 max_id 3
@@ -552,13 +604,13 @@
calling pci_arch_init+0x0/0x56 @ 1
PCI: PCI BIOS revision 2.10 entry at 0xfd8c5, last bus=4
PCI: Using configuration type 1 for base access
-initcall pci_arch_init+0x0/0x56 returned 0 after 0 usecs
+initcall pci_arch_init+0x0/0x56 returned 0 after 3906 usecs
calling topology_init+0x0/0x32 @ 1
initcall topology_init+0x0/0x32 returned 0 after 0 usecs
calling mtrr_init_finialize+0x0/0x31 @ 1
initcall mtrr_init_finialize+0x0/0x31 returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x1ea @ 1
-initcall param_sysfs_init+0x0/0x1ea returned 0 after 3906 usecs
+initcall param_sysfs_init+0x0/0x1ea returned 0 after 0 usecs
calling pm_sysrq_init+0x0/0x12 @ 1
initcall pm_sysrq_init+0x0/0x12 returned 0 after 0 usecs
calling audit_watch_init+0x0/0x23 @ 1
@@ -593,44 +645,17 @@
calling fbmem_init+0x0/0x7c @ 1
initcall fbmem_init+0x0/0x7c returned 0 after 0 usecs
calling acpi_init+0x0/0x2cf @ 1
-ACPI: Interpreter disabled.
-initcall acpi_init+0x0/0x2cf returned -19 after 0 usecs
+ERROR: Unable to locate IOAPIC for GSI 9
+ACPI: EC: Look up EC in DSDT
+ACPI: Interpreter enabled
+ACPI: (supports S0 S1 S4 S5)
+ACPI: Using IOAPIC for interrupt routing
+initcall acpi_init+0x0/0x2cf returned 0 after 19531 usecs
calling dock_init+0x0/0x79 @ 1
+ACPI: No dock devices found.
initcall dock_init+0x0/0x79 returned 0 after 0 usecs
calling acpi_pci_root_init+0x0/0x21 @ 1
-initcall acpi_pci_root_init+0x0/0x21 returned 0 after 0 usecs
-calling acpi_pci_link_init+0x0/0x3b @ 1
-initcall acpi_pci_link_init+0x0/0x3b returned 0 after 0 usecs
-calling pnp_init+0x0/0xa @ 1
-initcall pnp_init+0x0/0xa returned 0 after 0 usecs
-calling __setup_shutdown_event+0x0/0x1b @ 1
-initcall __setup_shutdown_event+0x0/0x1b returned 0 after 0 usecs
-calling xenbus_probe_backend_init+0x0/0x1f @ 1
-initcall xenbus_probe_backend_init+0x0/0x1f returned 0 after 0 usecs
-calling xenbus_probe_frontend_init+0x0/0x1f @ 1
-initcall xenbus_probe_frontend_init+0x0/0x1f returned 0 after 0 usecs
-calling balloon_init+0x0/0x22f @ 1
-xen_balloon: Initialising balloon driver with page order 0.
-last_pfn = 0x2dfef9 max_arch_pfn = 0x1000000
-initcall balloon_init+0x0/0x22f returned 0 after 35156 usecs
-calling misc_init+0x0/0x95 @ 1
-initcall misc_init+0x0/0x95 returned 0 after 0 usecs
-calling vga_arb_device_init+0x0/0x62 @ 1
-vgaarb: loaded
-initcall vga_arb_device_init+0x0/0x62 returned 0 after 0 usecs
-calling serio_init+0x0/0x6c @ 1
-initcall serio_init+0x0/0x6c returned 0 after 0 usecs
-calling input_init+0x0/0x108 @ 1
-initcall input_init+0x0/0x108 returned 0 after 0 usecs
-calling rtc_init+0x0/0x59 @ 1
-initcall rtc_init+0x0/0x59 returned 0 after 0 usecs
-calling power_supply_class_init+0x0/0x2b @ 1
-initcall power_supply_class_init+0x0/0x2b returned 0 after 0 usecs
-calling hwmon_init+0x0/0xe7 @ 1
-initcall hwmon_init+0x0/0xe7 returned 0 after 0 usecs
-calling pci_subsys_init+0x0/0xdc @ 1
-PCI: Probing PCI hardware
-PCI: Probing PCI hardware (bus 00)
+ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1d.0: reg 20 io port: [0x2000-0x201f]
pci 0000:00:1d.1: reg 20 io port: [0x2020-0x203f]
pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f]
@@ -651,22 +676,29 @@
pci 0000:02:01.0: reg 18 io port: [0x3000-0x30ff]
pci 0000:02:03.0: reg 10 64bit mmio: [0xfc300000-0xfc31ffff]
pci 0000:02:03.0: reg 20 io port: [0x3400-0x343f]
-pci 0000:[ 0.800412] serio: i8042 KBD port at 0x60,0x64 irq 1
-initcall i8042_init+0x0/0x343 returned 0 after 245818 usecs
+pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
+pci 0000:02:03.0: PME# disabled
+pci 0000:02:03.1: reg 10 64bit mmio: [0xfc320000-0xfc33ffff]
+pci 0000:02:03.1: reg 20 io port: [0x3440-0x347f]
+pci 0000:02:03.1: PME# supported from D0 D3hot D3cold
+pci 0000:02:03.1: PME# disabled
+pci 0000:01:1d.0: bridge io port: [0x3000-0x3fff]
+pci 0000:01:1d[ 0.852407] serio: i8042 KBD port at 0x60,0x64 irq 1
+initcall i8042_init+0x0/0x343 returned 0 after 245338 usecs
calling mousedev_init+0x0/0x72 @ 1
mice: PS/2 mouse device common for all mice
-initcall mousedev_init+0x0/0x72 returned 0 after 97 usecs
+initcall mousedev_init+0x0/0x72 returned 0 after 93 usecs
calling atkbd_init+0x0/0x1b @ 1
initcall atkbd_init+0x0/0x1b returned 0 after 29 usecs
calling xenkbd_init+0x0/0x4b @ 1
initcall xenkbd_init+0x0/0x4b returned -19 after 0 usecs
calling cmos_init+0x0/0x5a @ 1
-rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
-rtc0: alarms up to one day, 114 bytes nvram
-initcall cmos_init+0x0/0x5a returned 0 after 223 usecs
+rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
+rtc0: alarms up to one month, y3k, 114 bytes nvram
+initcall cmos_init+0x0/0x5a returned 0 after 231 usecs
calling init_ladder+0x0/0xa @ 1
cpuidle: using governor ladder
-initcall init_ladder+0x0/0xa returned 0 after 10 usecs
+initcall init_ladder+0x0/0xa returned 0 after 9 usecs
calling init_menu+0x0/0xa @ 1
cpuidle: using governor menu
initcall init_menu+0x0/0xa returned 0 after 7 usecs
@@ -684,15 +716,15 @@
calling snap_init+0x0/0x2d @ 1
initcall snap_init+0x0/0x2d returned 0 after 1 usecs
calling rif_init+0x0/0x68 @ 1
-initcall rif_init+0x0/0x68 returned 0 after 23 usecs
+initcall rif_init+0x0/0x68 returned 0 after 22 usecs
calling blackhole_module_init+0x0/0xa @ 1
initcall blackhole_module_init+0x0/0xa returned 0 after 1 usecs
calling init_cgroup_cls+0x0/0xa @ 1
initcall init_cgroup_cls+0x0/0xa returned 0 after 0 usecs
calling sysctl_ipv4_init+0x0/0x3b @ 1
-initcall sysctl_ipv4_init+0x0/0x3b returned 0 after 268 usecs
+initcall sysctl_ipv4_init+0x0/0x3b returned 0 after 266 usecs
calling init_syncookies+0x0/0x12 @ 1
-initcall init_syncookies+0x0/0x12 returned 0 after 60 usecs
+initcall init_syncookies+0x0/0x12 returned 0 after 59 usecs
calling ipv4_netfilter_init+0x0/0xa @ 1
initcall ipv4_netfilter_init+0x0/0xa returned 0 after 1 usecs
calling cubictcp_register+0x0/0x6c @ 1
@@ -701,19 +733,19 @@
calling inet6_init+0x0/0x28d @ 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
-initcall inet6_init+0x0/0x28d returned 0 after 1103 usecs
+initcall inet6_init+0x0/0x28d returned 0 after 1068 usecs
calling mip6_init+0x0/0xa2 @ 1
Mobile IPv6
initcall mip6_init+0x0/0xa2 returned 0 after 7 usecs
calling packet_init+0x0/0x35 @ 1
NET: Registered protocol family 17
-initcall packet_init+0x0/0x35 returned 0 after 12 usecs
+initcall packet_init+0x0/0x35 returned 0 after 13 usecs
calling dcbnl_init+0x0/0x2b @ 1
initcall dcbnl_init+0x0/0x2b returned 0 after 0 usecs
calling mce_debugfs_init+0x0/0x31 @ 1
-initcall mce_debugfs_init+0x0/0x31 returned 0 after 11 usecs
+initcall mce_debugfs_init+0x0/0x31 returned 0 after 12 usecs
calling severities_debugfs_init+0x0/0x31 @ 1
-initcall severities_debugfs_init+0x0/0x31 returned 0 after 3 usecs
+initcall severities_debugfs_init+0x0/0x31 returned 0 after 2 usecs
calling hpet_insert_resource+0x0/0x1a @ 1
initcall hpet_insert_resource+0x0/0x1a returned 1 after 0 usecs
initcall hpet_insert_resource+0x0/0x1a returned with error code 1
@@ -730,17 +762,17 @@
calling io_apic_bug_finalize+0x0/0x16 @ 1
initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 0 usecs
calling check_early_ioremap_leak+0x0/0x58 @ 1
-initcall check_early_ioremap_leak+0x0/0x58 returned 0 after 0 usecs
+initcall check_early_ioremap_leak+0x0/0x58 returned 0 after 1 usecs
calling pat_memtype_list_init+0x0/0x21 @ 1
-initcall pat_memtype_list_init+0x0/0x21 returned 0 after 3 usecs
+initcall pat_memtype_list_init+0x0/0x21 returned 0 after 4 usecs
calling sched_init_debug+0x0/0x1d @ 1
initcall sched_init_debug+0x0/0x1d returned 0 after 2 usecs
calling init_oops_id+0x0/0x36 @ 1
-initcall init_oops_id+0x0/0x36 returned 0 after 7 usecs
+initcall init_oops_id+0x0/0x36 returned 0 after 6 usecs
calling disable_boot_consoles+0x0/0x37 @ 1
initcall disable_boot_consoles+0x0/0x37 returned 0 after 0 usecs
calling pm_qos_power_init+0x0/0xa8 @ 1
-initcall pm_qos_power_init+0x0/0xa8 returned 0 after 124 usecs
+initcall pm_qos_power_init+0x0/0xa8 returned 0 after 104 usecs
calling software_resume+0x0/0x1d1 @ 1
PM: Resume from disk failed.
initcall software_resume+0x0/0x1d1 returned -2 after 7 usecs
@@ -749,28 +781,28 @@
initcall debugfs_kprobe_init+0x0/0x74 returned 0 after 7 usecs
calling taskstats_init+0x0/0x76 @ 1
registered taskstats version 1
-initcall taskstats_init+0x0/0x76 returned 0 after 16 usecs
+initcall taskstats_init+0x0/0x76 returned 0 after 23 usecs
calling clear_boot_tracer+0x0/0x23 @ 1
initcall clear_boot_tracer+0x0/0x23 returned 0 after 0 usecs
calling max_swapfiles_check+0x0/0x3 @ 1
initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs
calling random32_reseed+0x0/0x84 @ 1
-initcall random32_reseed+0x0/0x84 returned 0 after 11 usecs
+initcall random32_reseed+0x0/0x84 returned 0 after 9 usecs
calling pci_resource_alignment_sysfs_init+0x0/0xf @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0xf returned 0 after 2 usecs
calling pci_sysfs_init+0x0/0x40 @ 1
-initcall pci_sysfs_init+0x0/0x40 returned 0 after 685 usecs
+initcall pci_sysfs_init+0x0/0x40 returned 0 after 663 usecs
calling boot_wait_for_devices+0x0/0x2b @ 1
-initcall boot_wait_for_devices+0x0/0x2b returned 0 after 1 usecs
+initcall boot_wait_for_devices+0x0/0x2b returned 0 after 2 usecs
calling regulator_init_complete+0x0/0xe8 @ 1
initcall regulator_init_complete+0x0/0xe8 returned 0 after 0 usecs
calling seqgen_init+0x0/0xa @ 1
initcall seqgen_init+0x0/0xa returned 0 after 24 usecs
calling rtc_hctosys+0x0/0x11a @ 1
-rtc_cmos rtc_cmos: setting system clock to 2010-11-21 15:53:00 UTC (1290354780)
+rtc_cmos 00:04: setting system clock to 2010-11-29 21:48:30 UTC (1291067310)
initcall rtc_hctosys+0x0/0x11a returned 0 after 63 usecs
calling memmap_init+0x0/0x7e @ 1
-initcall memmap_init+0x0/0x7e returned 0 after 60 usecs
+initcall memmap_init+0x0/0x7e returned 0 after 62 usecs
calling pci_mmcfg_late_insert_resources+0x0/0x15f @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned 1 after 0 usecs
initcall pci_mmcfg_late_insert_resources+0x0/0x15f returned with error code 1
@@ -778,21 +810,76 @@
Initalizing network drop monitor service
initcall init_net_drop_monitor+0x0/0x107 returned 0 after 18 usecs
calling tcp_congestion_default+0x0/0xa @ 1
-initcall tcp_congestion_default+0x0/0xa returned 0 after 1 usecs
+initcall tcp_congestion_default+0x0/0xa returned 0 after 0 usecs
calling initialize_hashrnd+0x0/0x12 @ 1
initcall initialize_hashrnd+0x0/0x12 returned 0 after 6 usecs
async_waiting @ 1
async_continuing @ 1 after 0 usec
-Freeing unused kernel m[ 1.561876] calling uhci_hcd_init+0x0/0xa1
[uhci_hcd] @ 70
+Freeing unused kernel memory: 396k freed
+Write protecting the kernel text: 2592k
+Write protecting the kernel read-only data: 924k
+ wait...
+input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input0
+udev[51]: starting version 164
+calling usb_init+0x0/0x17a [usbcore] @ 76
+usbcore: registered new interface driver usbfs
+usbcore: registered new interface driver hub
+usbcore: registered new device driver usb
+initcall usb_init+0x0/0x17a [usbcore] returned 0 after 1386 usecs
+calling ide_init+0x0/0x64 [ide_core] @ 80
+Uniform Multi-Platform E-IDE driver
+initcall ide_init+0x0/0x64 [ide_core] returned 0 after 838 usecs
+calling ehci_hcd_init+0x0/0x65 [ehci_hcd] @ 74
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+initcall ehci_hcd_init+0x0/0x65 [ehci_hcd] returned 0 after 388 usecs
+calling e1000_init_module+0x0/0x6b [e1000] @ 125
+Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
+Copyright (c) 1999-2006 Intel Corporation.
+xen: registering gsi 54 triggering 0 polarity 1
+xen: --> irq=54
+: Set PCI routing entry (4-6 -> 0x98 -> IRQ 54 Mode:1 Active:1)
+e1000 0000:02:03.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54
+calling thermal_init+0x0/0x2e [thermal_sys] @ 102
+initcall thermal_init+0x0/0x2e [thermal_sys] returned 0 after 24 usecs
+calling init_scsi+0x0/0x73 [scsi_mod] @ 123
+calling floppy_module_init+0x0/0xcca [floppy] @ 144
+Floppy drive(s): fd0 is 1.44M
+SCSI subsystem initialized
+initcall init_scsi+0x0/0x73 [scsi_mod] returned 0 after 2038 usecs
+calling spi_transport_init+0x0/0x60 [scsi_transport_spi] @ 174
+initcall spi_transport_init+0x0/0x60 [scsi_transport_spi] returned 0 after 355
usecs
+e1000: 0000:02:03.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2d:3e:d2
+calling piix_ide_init+0x0/0x9e [piix] @ 80
+piix 0000:00:1f.1: IDE controller (0x8086:0x248b rev 0x02)
+xen: registering gsi 18 triggering 0 polarity 1
+xen: --> irq=18
+: Set PCI routing entry (2-18 -> 0xa0 -> IRQ 18 Mode:1 Active:1)
+PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
+piix 0000:00:1f.1: not 100% native mode: will probe irqs later
+ ide0: BM-DMA at 0x2060-0x2067
+ ide1: BM-DMA at 0x2068-0x206f
+Probing IDE interface ide0...
+FDC 0 is a post-1991 82077
+calling acpi_thermal_init+0x0/0x6b [thermal] @ 102
+initcall acpi_thermal_init+0x0/0x6b [thermal] returned 0 after 86 usecs
+initcall floppy_module_init+0x0/0xcca [floppy] returned 0 after 290494 usecs
+calling uhci_hcd_init+0x0/0xa1 [uhci_hcd] @ 76
uhci_hcd: USB Universal Host Controller Interface driver
-calling mv_init+0x0/0x39 [sata_mv] @ 87
+calling ata_init+0x0/0x2bc [libata] @ 123
+libata version 3.00 loaded.
+initcall ata_init+0x0/0x2bc [libata] returned 0 after 132 usecs
+calling ahd_linux_init+0x0/0x21d [aic79xx] @ 174
+xen: registering gsi 28 triggering 0 polarity 1
+xen: --> irq=28
+: Set PCI routing entry (3-4 -> 0xa8 -> IRQ 28 Mode:1 Active:1)
+aic79xx 0000:03:02.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
+calling mv_init+0x0/0x39 [sata_mv] @ 123
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
sata_mv 0000:02:01.0: version 1.28
-sata_mv 0000:02:01.0: found PCI INT A -> IRQ 5
-sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:02:03.0
-sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:02:03.1
-sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:03:02.0
-sata_mv 0000:02:01.0: sharing IRQ 5 with 0000:03:02.1
+xen: registering gsi 48 triggering 0 polarity 1
+xen: --> irq=48
+: Set PCI routing entry (4-0 -> 0xb0 -> IRQ 48 Mode:1 Active:1)
+sata_mv 0000:02:01.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
sata_mv 0000:02:01.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
scsi1 : sata_mv
scsi2 : sata_mv
@@ -802,23 +889,22 @@
scsi6 : sata_mv
scsi7 : sata_mv
scsi8 : sata_mv
-ata1: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc222000 irq 5
-ata2: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc224000 irq 5
-ata3: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc226000 irq 5
-ata4: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc228000 irq 5
-ata5: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc232000 irq 5
-ata6: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc234000 irq 5
-ata7: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc236000 irq 5
-ata8: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc238000 irq 5
-initcall mv_init+0x0/0x39 [sata_mv] returned 0 after 34488 usecs
-e1000 0000:02:03.1: found PCI INT B -> IRQ 5
-e1000 0000:02:03.1: sharing IRQ 5 with 0000:02:01.0
-e1000 0000:02:03.1: sharing IRQ 5 with 0000:02:03.0
-e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:02.0
-e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:02.1
+ata1: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc222000 irq 48
+ata2: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc224000 irq 48
+ata3: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc226000 irq 48
+ata4: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc228000 irq 48
+ata5: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc232000 irq 48
+ata6: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc234000 irq 48
+ata7: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc236000 irq 48
+ata8: SATA max UDMA/133 mmio m1048576@0xfc200000 port 0xfc238000 irq 48
+initcall mv_init+0x0/0x39 [sata_mv] returned 0 after 36514 usecs
+xen: registering gsi 55 triggering 0 polarity 1
+xen: --> irq=55
+: Set PCI routing entry (4-7 -> 0xb8 -> IRQ 55 Mode:1 Active:1)
+e1000 0000:02:03.1: PCI INT B -> GSI 55 (level, low) -> IRQ 55
e1000: 0000:02:03.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2d:3e:d3
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
-initcall e1000_init_module+0x0/0x6b [e1000] returned 0 after 753580 usecs
+initcall e1000_init_module+0x0/0x6b [e1000] returned 0 after 769903 usecs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HDS721010CLA332, JP4OA39C, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
@@ -838,47 +924,65 @@
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
-PCI: setting IRQ 11 as level-triggered
-uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11
-uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:04:01.0
+xen: registering gsi 16 triggering 0 polarity 1
+xen: --> irq=16
+: Set PCI routing entry (2-16 -> 0xc0 -> IRQ 16 Mode:1 Active:1)
+uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
-uhci_hcd 0000:00:1d.0: request interrupt 11 failed
-uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
-uhci_hcd 0000:00:1d.0: init 0000:00:1d.0 fail, -38
-uhci_hcd: probe of 0000:00:1d.0 failed with error -38
-uhci_hcd 0000:00:1d.1: setting latency timer to 64
-uhci_hcd 0000:00:1d.1: UHCI Host Controller
-uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 1
-uhci_hcd 0000:00:1d.1: request interrupt 10 failed
-uhci_hcd 0000:00:1d.1: USB bus 1 deregistered
-uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -38
-uhci_hcd: probe of 0000:00:1d.1 failed with error -38
-uhci_hcd 0000:00:1d.2: setting latency timer to 64
-uhci_hcd 0000:00:1d.2: UHCI Host Controller
-uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 1
-uhci_hcd 0000:00:1d.2: irq 7, io base 0x00002040
+uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.25 uhci_hcd
-usb usb1: SerialNumber: 0000:00:1d.2
+usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
-initcall uhci_hcd_init+0x0/0xa1 [uhci_hcd] returned 0 after 2064562 usecs
-initcall piix_ide_init+0x0/0x9e [piix] returned 0 after 2199568 usecs
+xen: registering gsi 19 triggering 0 polarity 1
+xen: --> irq=19
+: Set PCI routing entry (2-19 -> 0xc8 -> IRQ 19 Mode:1 Active:1)
+uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
+uhci_hcd 0000:00:1d.1: setting latency timer to 64
+uhci_hcd 0000:00:1d.1: UHCI Host Controller
+uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
+uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002020
+usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
+usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+usb usb2: Product: UHCI Host Controller
+usb usb2: Manufacturer: Linux 2.6.32.25 uhci_hcd
+usb usb2: SerialNumber: 0000:00:1d.1
+usb usb2: configuration #1 chosen from 1 choice
+hub 2-0:1.0: USB hub found
+hub 2-0:1.0: 2 ports detected
+xen: registering gsi 18 triggering 0 polarity 1
+xen_allocate_pirq: returning irq 18 for gsi 18
+xen: --> irq=18
+Already setup the GSI :18
+uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
+uhci_hcd 0000:00:1d.2: setting latency timer to 64
+uhci_hcd 0000:00:1d.2: UHCI Host Controller
+uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
+uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
+usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
+usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+usb usb3: Product: UHCI Host Controller
+usb usb3: Manufacturer: Linux 2.6.32.25 uhci_hcd
+usb usb3: SerialNumber: 0000:00:1d.2
+usb usb3: configuration #1 chosen from 1 choice
+hub 3-0:1.0: USB hub found
+hub 3-0:1.0: 2 ports detected
+initcall piix_ide_init+0x0/0x9e [piix] returned 0 after 2210200 usecs
+initcall uhci_hcd_init+0x0/0xa1 [uhci_hcd] returned 0 after 2197765 usecs
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
-calling piix_init+0x0/0x23 [ata_piix] @ 69
-initcall piix_init+0x0/0x23 [ata_piix] returned 0 after 51 usecs
-calling ata_generic_init+0x0/0x14 [ata_generic] @ 69
-initcall ata_generic_init+0x0/0x14 [ata_generic] returned 0 after 424 usecs
-calling cdrom_init+0x0/0x57 [cdrom] @ 120
-initcall cdrom_init+0x0/0x57 [cdrom] returned 0 after 34 usecs
-calling init_sd+0x0/0x127 [sd_mod] @ 117
+calling piix_init+0x0/0x23 [ata_piix] @ 80
+initcall piix_init+0x0/0x23 [ata_piix] returned 0 after 480 usecs
+calling ata_generic_init+0x0/0x14 [ata_generic] @ 80
+initcall ata_generic_init+0x0/0x14 [ata_generic] returned 0 after 511 usecs
+calling init_sd+0x0/0x127 [sd_mod] @ 212
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
@@ -888,47 +992,139 @@
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
- sdb:initcall init_sd+0x0/0x127 [sd_mod] returned 0 after 3042 usecs
-calling ide_cdrom_init+0x0/0x15 [ide_cd_mod] @ 120
+ sdb:initcall init_sd+0x0/0x127 [sd_mod] returned 0 after 2856 usecs
+calling cdrom_init+0x0/0x57 [cdrom] @ 215
+initcall cdrom_init+0x0/0x57 [cdrom] returned 0 after 36 usecs
+ sda1 sda2 sda3 sda4
+sd 1:0:0:0: [sda] Attached SCSI disk
+ sdb1 sdb2 sdb3 sdb4
+sd 2:0:0:0: [sdb] Attached SCSI disk
+calling ide_cdrom_init+0x0/0x15 [ide_cd_mod] @ 215
ide-cd driver 5.00
ide-cd: hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
-initcall ide_cdrom_init+0x0/0x15 [ide_cd_mod] returned 0 after 12258 usecs
+initcall ide_cdrom_init+0x0/0x15 [ide_cd_mod] returned 0 after 13465 usecs
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
-aic79xx 0000:03:02.1: found PCI INT B -> IRQ 5
-aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:02:01.0
-aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:02:03.0
-aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:02:03.1
-aic79xx 0000:03:02.1: sharing IRQ 5 with 0000:03:02.0
+xen: registering gsi 29 triggering 0 polarity 1
+xen: --> irq=29
+: Set PCI routing entry (3-5 -> 0xd0 -> IRQ 29 Mode:1 Active:1)
+aic79xx 0000:03:02.1: PCI INT B -> GSI 29 (level, low) -> IRQ 29
scsi9 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133MHz, 512 SCBs
-initcall ahd_linux_init+0x0/0x21d [aic79xx] returned 0 after 29539948 usecs
-ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
-ata1.00: failed command: READ FPDMA QUEUED
-ata1.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
- res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
-ata1.00: status: { DRDY }
-ata1: hard resetting link
-ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
-ata2.00: failed command: READ FPDMA QUEUED
-ata2.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
- res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
-ata2.00: status: { DRDY }
-ata2: hard resetting link
-ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
-ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
-ata2.00: configured for UDMA/133
-ata2.00: device reported invalid CHS sector 0
-ata2: EH complete
-ata1.00: configured for UDMA/133
-ata1.00: device reported invalid CHS sector 0
-ata1: EH complete
-scsi 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24
0x0
-scsi 0:0:0:0: Command already completed
-scsi 0:0:0:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
-scsi 0:0:0:0: Command already completed
-scsi 0:0:0:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0
0x24 0x0
-scsi0: Device reset code sleeping
+initcall ahd_linux_init+0x0/0x21d [aic79xx] returned 0 after 29533581 usecs
+calling wait_scan_init+0x0/0x8 [scsi_wait_scan] @ 243
+initcall wait_scan_init+0x0/0x8 [scsi_wait_scan] returned 0 after 2 usecs
+calling md_init+0x0/0xb8 [md_mod] @ 253
+initcall md_init+0x0/0xb8 [md_mod] returned 0 after 43 usecs
+calling raid_init+0x0/0xa [raid1] @ 253
+md: raid1 personality registered for level 1
+initcall raid_init+0x0/0xa [raid1] returned 0 after 10 usecs
+md: md0 stopped.
+md: bind<sdb1>
+md: bind<sda1>
+raid1: raid set md0 active with 2 out of 2 mirrors
+md0: detected capacity change from 0 to 501612544
+ md0: unknown partition table
+md: md1 stopped.
+md: bind<sdb2>
+md: bind<sda2>
+raid1: raid set md1 active with 2 out of 2 mirrors
+md1: detected capacity change from 0 to 1003356160
+ md1: unknown partition table
+md: md2 stopped.
+md: bind<sdb3>
+md: bind<sda3>
+raid1: raid set md2 active with 2 out of 2 mirrors
+md2: detected capacity change from 0 to 29997465600
+ md2: unknown partition table
+md: md3 stopped.
+md: bind<sdb4>
+md: bind<sda4>
+raid1: raid set md3 active with 2 out of 2 mirrors
+md3: detected capacity change from 0 to 968699346944
+ md3: unknown partition table
+calling dm_init+0x0/0x37 [dm_mod] @ 285
+device-mapper: uevent: version 1.0.3
+device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@xxxxxxxxxx
+initcall dm_init+0x0/0x37 [dm_mod] returned 0 after 2329 usecs
+calling dm_crypt_init+0x0/0x54 [dm_crypt] @ 293
+initcall dm_crypt_init+0x0/0x54 [dm_crypt] returned 0 after 38 usecs
+calling crypto_module_init+0x0/0xa [xts] @ 305
+initcall crypto_module_init+0x0/0xa [xts] returned 0 after 2 usecs
+calling serpent_mod_init+0x0/0x2f [serpent] @ 307
+initcall serpent_mod_init+0x0/0x2f [serpent] returned 0 after 238 usecs
+alg: No test for xts(serpent) (xts(serpent-generic))
+calling init_mbcache+0x0/0xd [mbcache] @ 356
+initcall init_mbcache+0x0/0xd [mbcache] returned 0 after 1 usecs
+calling journal_init+0x0/0x81 [jbd] @ 356
+initcall journal_init+0x0/0x81 [jbd] returned 0 after 1263 usecs
+calling init_ext3_fs+0x0/0x5e [ext3] @ 356
+initcall init_ext3_fs+0x0/0x5e [ext3] returned 0 after 514 usecs
+kjournald starting. Commit interval 5 seconds
+EXT3-fs: mounted filesystem with ordered data mode.
+.88 booting
+style concurrent boot in runlevel S.
+tplug events dispatcher: udevd.
+udev[407]: starting version 164
+e initial hotplug events...done.
+calling pci_hotplug_init+0x0/0x3b [pci_hotplug] @ 418
+pci_hotplug: PCI Hot Plug PCI Core version: 0.5
+initcall pci_hotplug_init+0x0/0x3b [pci_hotplug] returned 0 after 9 usecs
+v to be fully populated...[ 45.677246] calling
xen_acpi_processor_extcntl_init+0x0/0x45 [acpi_processor] @ 439
+initcall xen_acpi_processor_extcntl_init+0x0/0x45 [acpi_processor] returned 0
after 0 usecs
+calling shpcd_init+0x0/0x4d [shpchp] @ 440
+shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
+initcall shpcd_init+0x0/0x4d [shpchp] returned 0 after 156 usecs
+calling edac_init+0x0/0xa1 [edac_core] @ 420
+EDAC MC: Ver: 2.1.0 Nov 20 2010
+initcall edac_init+0x0/0xa1 [edac_core] returned 0 after 13934 usecs
+calling evdev_init+0x0/0xa [evdev] @ 453
+initcall evdev_init+0x0/0xa [evdev] returned 0 after 88 usecs
+calling acpi_button_init+0x0/0x46 [button] @ 434
+input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input1
+ACPI: Power Button [PWRB]
+input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
+ACPI: Power Button [PWRF]
+initcall acpi_button_init+0x0/0x46 [button] returned 0 after 1629 usecs
+calling e7xxx_init+0x0/0x27 [e7xxx_edac] @ 420
+EDAC e7xxx: tolm = f8000, remapbase = 200000, remaplimit = 208000
+EDAC MC0: Giving out device to 'e7xxx_edac' 'E7501': DEV 0000:00:00.0
+EDAC PCI0: Giving out device to module 'e7xxx_edac' controller 'EDAC PCI
controller': DEV '0000:00:00.0' (POLLED)
+initcall e7xxx_init+0x0/0x27 [e7xxx_edac] returned 0 after 2508 usecs
+calling acpi_container_init+0x0/0x3b [container] @ 498
+initcall acpi_container_init+0x0/0x3b [container] returned 0 after 12790 usecs
+calling pcspkr_init+0x0/0xa [pcspkr] @ 468
+input: PC Speaker as /devices/platform/pcspkr/input/input3
+initcall pcspkr_init+0x0/0xa [pcspkr] returned 0 after 252 usecs
+calling acpi_processor_init+0x0/0x10b [processor] @ 438
+initcall acpi_processor_init+0x0/0x10b [processor] returned 0 after 666 usecs
+calling i2c_init+0x0/0x56 [i2c_core] @ 449
+initcall i2c_init+0x0/0x56 [i2c_core] returned 0 after 546 usecs
+calling mod_init+0x0/0x1d8 [intel_rng] @ 441
+calling i2c_i801_init+0x0/0xa2 [i2c_i801] @ 449
+xen: registering gsi 17 triggering 0 polarity 1
+xen: --> irq=17
+: Set PCI routing entry (2-17 -> 0xd8 -> IRQ 17 Mode:1 Active:1)
+i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
+initcall i2c_i801_init+0x0/0xa2 [i2c_i801] returned 0 after 273 usecs
+Intel 82802 RNG detected
+initcall mod_init+0x0/0x1d8 [intel_rng] returned 0 after 5260 usecs
+calling snd_mem_init+0x0/0x22 [snd_page_alloc] @ 468
+initcall snd_mem_init+0x0/0x22 [snd_page_alloc] returned 0 after 14 usecs
+calling init_tis+0x0/0x80 [tpm_tis] @ 508
+initcall init_tis+0x0/0x80 [tpm_tis] returned 0 after 40 usecs
+calling init_soundcore+0x0/0x81 [soundcore] @ 468
+initcall init_soundcore+0x0/0x81 [soundcore] returned 0 after 26 usecs
+calling alsa_sound_init+0x0/0x78 [snd] @ 468
+initcall alsa_sound_init+0x0/0x78 [snd] returned 0 after 27 usecs
+calling alsa_timer_init+0x0/0x122 [snd_timer] @ 468
+initcall alsa_timer_init+0x0/0x122 [snd_timer] returned 0 after 3370 usecs
+calling alsa_pcm_init+0x0/0x4c [snd_pcm] @ 468
+initcall alsa_pcm_init+0x0/0x4c [snd_pcm] returned 0 after 11 usecs
+calling pcsp_init+0x0/0x19 [snd_pcsp] @ 468
+Error: Driver 'pcspkr' is already registered, aborting...
+initcall pcsp_init+0x0/0x19 [snd_pcsp] returned -16 after 14 usecs
+initcall pcsp_init+0x0/0x19 [snd_pcsp] returned with error code -16
--- /tmp/vector_orig 2010-11-29 18:20:23.000000000 -0500
+++ /tmp/vector_new 2010-11-29 18:21:17.000000000 -0500
@@ -10,25 +10,25 @@
(XEN) EFLAGS: 00010286 CONTEXT: hypervisor
(XEN) eax: ff1fb724 ebx: 00000064 ecx: 00000000 edx: 00000000
(XEN) esi: ff32bfb4 edi: ff32bf78 ebp: ff12daf0 esp: ff32bde4
-(XEN) cr0: 8005003b cr4: 000006f0 cr3: 3a466000 cr2: c2b05b4c
+(XEN) cr0: 8005003b cr4: 000006f0 cr3: 00bd2ca0 cr2: df4c9800
(XEN) ds: e010 es: e010 fs: 00d8 gs: 00e0 ss: e010 cs: e008
(XEN) Xen stack trace from esp=ff32bde4:
(XEN) 00000008 00000282 00000000 ff33df62 00000064 ff32bfb4 00000064
ff10e963
(XEN) 00000000 00000000 00000000 ff33df54 00000064 00000065 ff1fb32c
ff10de50
-(XEN) 00000064 ff32bf78 ff1e5416 1f17963a ff1fb38c 0000002a ff32bf78
ff10deea
+(XEN) 00000064 ff32bf78 ff1e5416 8c2735e5 ff1fb38c 0000002a ff32bf78
ff10deea
(XEN) 0000002a ff32bf78 00000000 00000000 ff1fb760 ff1fb7b8 00000296
ff12dadf
-(XEN) 0000002a ff32bf78 000000fc 1e7f0a81 ff35a68c ff1fb760 ff1fb7b8
ff12ef20
-(XEN) 0000002a ff32bf78 00000000 ff35afd8 ff1149b7 ff339070 1f17963a
2a000296
-(XEN) 00000000 1e7f0a81 00000014 ff33e400 ff1fb760 ff32bf78 00000001
ff12e594
-(XEN) ff1fb760 ff32bf78 ff35a68c ff35af48 ff115dc5 ff35a68c 1e7f0a81
00000000
-(XEN) ffb80280 ff33e420 ff32bf48 ff14e882 00000004 ff1fb760 ff32bf78
120a50c8
-(XEN) 00000014 1e7f0a81 00000014 ff227180 ff140aad ff3533c0 00000001
00000003
-(XEN) 00000014 ff32bf78 00000004 ff35af48 ff11c9f2 00000000 ffb8029c
1c58a5c6
-(XEN) 00005687 00000000 00000000 1e7fcdd1 00000014 ff35af48 ff227180
ff32bfb4
+(XEN) 0000002a ff32bf78 000000fc 8b5844a0 ff35868c ff1fb760 ff1fb7b8
ff12ef20
+(XEN) 0000002a ff32bf78 00000000 ff358f48 ff1149b7 ff339070 8c2735e5
2a000296
+(XEN) 00000000 8b5844a0 00000068 ff33e400 ff1fb760 ff32bf78 00000001
ff12e594
+(XEN) ff1fb760 ff32bf78 ff35868c ff358f48 ff115dc5 ff35868c 8b5844a0
00000000
+(XEN) ffb80280 ff33e420 ff32bf48 ff14e882 00000004 ff1fb760 ff32bf78
88bd603d
+(XEN) 00000068 8b5844a0 00000068 ff227180 ff140aad ffbd2044 00000001
00000003
+(XEN) 00000068 ff32bf78 00000004 ff358f48 ff11c9f2 00000000 ffb8029c
88bdd058
+(XEN) 00006641 00000000 00000292 8b5907f0 00000068 ff358f48 ff227180
ff32bfb4
(XEN) 0000e010 0000e010 ff32bee4 ff1479d2 ff32bf78 ff32bfb4 00000000
00000000
(XEN) ff227b00 ff32bfb4 ff32bee4 ffffffff 00f10000 ff144152 0000e008
00000286
-(XEN) ff145d56 ffbfa000 ffbd4000 ffffffff 00000001 00000000 00000000
00000000
-(XEN) c13aad38 00000000 00000000 00f90000 c10023a7 00000061 00000246
c1371f8c
+(XEN) ff145d56 ffbfa000 ffbd2000 ffffffff 00000001 00000000 00000000
00000000
+(XEN) c13aad38 00000000 00000000 00c80000 c10023a7 00000061 00000246
c1371f8c
(XEN) 00000069 0000007b 0000007b 000000d8 000000e0 00000000 ffbfa000
(XEN) Xen call trace:
(XEN) [<ff10e8b4>] __dump_execstate+0x4/0x60
@@ -60,8 +60,8 @@
(XEN) cr0: 8005003b cr4: 000006f0 cr3: 00100120 cr2: 00000000
(XEN) ds: e010 es: e010 fs: e010 gs: e010 ss: e010 cs: e008
(XEN) Xen stack trace from esp=ff377f24:
-(XEN) 00000014 ff229100 ff227180 ff35af90 ff11c9f2 ff229100 00000000
ff15f89d
-(XEN) 00000000 0000e010 00000000 2d91af80 00000014 ff35af90 ff2279c0
ff15ff32
+(XEN) 00000068 ff229100 ff227180 ff358f90 ff11c9f2 ff229100 00000000
ff15f89d
+(XEN) 00000000 0000e010 ffffff4f 9a82144b 00000068 ff358f90 ff2279c0
ff15ff32
(XEN) ff22910c ff377fb4 0000e010 ff1401f7 ff377f78 ff377fb4 00000000
00000000
(XEN) ff227b00 ff377fb4 ff34a300 ffffffff 00fb0000 ff144152 0000e008
00000286
(XEN) ff145d56 00000001 ff377fb4 00002000 00000000 00000000 00000000
00000000
@@ -89,8 +89,8 @@
(XEN) cr0: 8005003b cr4: 000006f0 cr3: 00100120 cr2: 00000000
(XEN) ds: e010 es: e010 fs: e010 gs: e010 ss: e010 cs: e008
(XEN) Xen stack trace from esp=ff373f24:
-(XEN) 00000014 ff22b100 ff227180 ff238ed8 ff11c9f2 ff22b100 00000000
ff15f89d
-(XEN) 00000000 0000e010 00000000 360af34c 00000014 ff238ed8 ff2279c0
ff15ff32
+(XEN) 00000068 ff22b100 ff227180 ff238ed8 ff11c9f2 ff22b100 00000000
ff15f89d
+(XEN) 00000000 0000e010 ffffff3e a2895a87 00000068 ff238ed8 ff2279c0
ff15ff32
(XEN) ff22b10c ff373fb4 0000e010 ff1401f7 ff373f78 ff373fb4 00000000
00000000
(XEN) ff227b00 ff373fb4 ff34a400 ffffffff 00fb0000 ff144152 0000e008
00000286
(XEN) ff145d56 00000002 ff373fb4 00004000 00000000 00000000 00000000
00000000
@@ -118,8 +118,8 @@
(XEN) cr0: 8005003b cr4: 000006f0 cr3: 00100120 cr2: 00000000
(XEN) ds: e010 es: e010 fs: e010 gs: e010 ss: e010 cs: e008
(XEN) Xen stack trace from esp=ff36bf24:
-(XEN) 00000014 ff22d100 ff227180 ff238f20 ff11c9f2 ff22d100 00000000
ff15f89d
-(XEN) 00000000 0000e010 00000000 3e33e6bc 00000014 ff238f20 ff2279c0
ff15ff32
+(XEN) 00000068 ff22d100 ff227180 ff238f20 ff11c9f2 ff22d100 00000000
ff15f89d
+(XEN) 00000000 0000e010 ffffff76 aac608ff 00000068 ff238f20 ff2279c0
ff15ff32
(XEN) ff22d10c ff36bfb4 0000e010 ff1401f7 ff36bf78 ff36bfb4 00000000
00000000
(XEN) ff227b00 ff36bfb4 ff34a500 ffffffff 00fb0000 ff144152 0000e008
00000286
(XEN) ff145d56 00000003 ff36bfb4 00006000 00000000 00000000 00000000
00000000
@@ -146,12 +146,12 @@
(XEN) EFLAGS: 00000246 EM: 0 CONTEXT: pv guest
(XEN) eax: 00000000 ebx: 00000001 ecx: 00000000 edx: 00000000
(XEN) esi: 00000000 edi: c13aad38 ebp: 00000000 esp: c1371f8c
-(XEN) cr0: 8005003b cr4: 000006f0 cr3: 3a466000 cr2: b7569000
+(XEN) cr0: 8005003b cr4: 000006f0 cr3: 00bd2ca0 cr2: 08b008a8
(XEN) ds: 007b es: 007b fs: 00d8 gs: 00e0 ss: 0069 cs: 0061
(XEN) Guest stack trace from esp=c1371f8c:
-(XEN) c10062ae c13dd234 00000000 c13aad38 c100410f c10082d7 f306dc9c
00000004
-(XEN) e1a54b4e 133082e0 c1411dc8 c1410a68 c13e0811 149c50dc 00000003
bd7f2afe
-(XEN) 63467b65 c1411dc8 0166c000 c13e22e0 00000001 c1409044 1fc9d3f5
80000400
+(XEN) c10062ae c13dd234 00000000 c13aad38 c100410f c10082d7 8e8afd0c
00000005
+(XEN) 90f22974 c95e2944 c1411dc8 c1410a68 c13e0811 a5610e1c 00000003
4e43e83e
+(XEN) f40b38a6 c1411dc8 0166c000 c13e22e0 00000001 c1409044 1fc9d3f5
80000400
(XEN) 0002080b 00000f25 00000000 c2e89000 00000000 00000000 00000000
00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000
@@ -170,8 +170,8 @@
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000
(XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000
(XEN) [H: dump heap info]
-(XEN) 'H' pressed -> dumping heap info (now-0x14:4629761E)
-(XEN) heap[node=0][zone=0] -> 2200 pages
+(XEN) 'H' pressed -> dumping heap info (now-0x68:B2DD3710)
+(XEN) heap[node=0][zone=0] -> 2198 pages
(XEN) heap[node=0][zone=1] -> 0 pages
(XEN) heap[node=0][zone=2] -> 0 pages
(XEN) heap[node=0][zone=3] -> 0 pages
@@ -188,10 +188,10 @@
(XEN) heap[node=0][zone=14] -> 13304 pages
(XEN) heap[node=0][zone=15] -> 32768 pages
(XEN) heap[node=0][zone=16] -> 65536 pages
-(XEN) heap[node=0][zone=17] -> 115620 pages
+(XEN) heap[node=0][zone=17] -> 115672 pages
(XEN) heap[node=0][zone=18] -> 262144 pages
-(XEN) heap[node=0][zone=19] -> 491111 pages
-(XEN) heap[node=0][zone=20] -> 967350 pages
+(XEN) heap[node=0][zone=19] -> 491090 pages
+(XEN) heap[node=0][zone=20] -> 967310 pages
(XEN) heap[node=0][zone=21] -> 0 pages
(XEN) heap[node=0][zone=22] -> 0 pages
(XEN) heap[node=0][zone=23] -> 0 pages
@@ -230,18 +230,19 @@
(XEN) [a: dump timer queues]
(XEN) Dumping timer queues:
(XEN) CPU00:
-(XEN) ex= 29527us timer=ff339070 cb=ff114630(00000000)
csched_acct+0x0/0x430
-(XEN) ex= 29530us timer=ff227090 cb=ff1184e0(00000000) s_timer_fn+0x0/0x20
-(XEN) ex=1712916660us timer=ff3533c0 cb=ff163cf0(00000000)
plt_overflow+0x0/0x3e0
-(XEN) ex= 1126122us timer=ff3554e0 cb=ff187460(00000000)
mce_work_fn+0x0/0x120
-(XEN) ex= 125238us timer=ff353300 cb=ff164190(00000000)
time_calibration+0x0/0x60
-(XEN) ex= 9529us timer=ff35a68c cb=ff115c20(00000000)
csched_tick+0x0/0x240
+(XEN) ex= 9530us timer=ff35868c cb=ff115c20(00000000)
csched_tick+0x0/0x240
+(XEN) ex= 29529us timer=ff339070 cb=ff114630(00000000)
csched_acct+0x0/0x430
+(XEN) ex= 29533us timer=ff227090 cb=ff1184e0(00000000) s_timer_fn+0x0/0x20
+(XEN) ex= 7291691us timer=ff3554e0 cb=ff187460(00000000)
mce_work_fn+0x0/0x120
+(XEN) ex= 292970us timer=ff353300 cb=ff164190(00000000)
time_calibration+0x0/0x60
+(XEN) ex= 1235361us timer=ff3533c0 cb=ff163cf0(00000000)
plt_overflow+0x0/0x3e0
+(XEN) ex= 532us timer=ff2646b4 cb=ff14dfb0(ffb81b80)
irq_guest_eoi_timer_fn+0x0/0x140
(XEN) CPU01:
-(XEN) ex= 9534us timer=ff35abec cb=ff115c20(00000001)
csched_tick+0x0/0x240
+(XEN) ex= 9536us timer=ff358bec cb=ff115c20(00000001)
csched_tick+0x0/0x240
(XEN) CPU02:
-(XEN) ex= 9182us timer=ff35ac5c cb=ff115c20(00000002)
csched_tick+0x0/0x240
+(XEN) ex= 9184us timer=ff358c5c cb=ff115c20(00000002)
csched_tick+0x0/0x240
(XEN) CPU03:
-(XEN) ex= 8829us timer=ff35accc cb=ff115c20(00000003)
csched_tick+0x0/0x240
+(XEN) ex= 8830us timer=ff358ccc cb=ff115c20(00000003)
csched_tick+0x0/0x240
(XEN) [c: dump ACPI Cx structures]
(XEN) 'c' pressed -> printing ACPI Cx structures
(XEN) [e: dump evtchn info]
@@ -254,15 +255,25 @@
(XEN) 3 [0/0]: s=6 n=0 x=0
(XEN) 4 [0/0]: s=5 n=0 v=1 x=0
(XEN) 5 [0/0]: s=6 n=0 x=0
-(XEN) 6 [0/0]: s=2 n=0 d=0 x=0
+(XEN) 6 [0/0]: s=3 n=0 d=0 p=22 x=0
(XEN) 7 [0/0]: s=5 n=0 v=9 x=0
-(XEN) 8 [0/0]: s=5 n=0 v=2 x=0
-(XEN) 9 [0/0]: s=4 n=0 p=1 x=0
-(XEN) 10 [0/0]: s=4 n=0 p=8 x=0
-(XEN) 11 [0/0]: s=4 n=0 p=5 x=0
-(XEN) 12 [0/0]: s=4 n=0 p=14 x=0
-(XEN) 13 [0/0]: s=4 n=0 p=15 x=0
-(XEN) 14 [0/0]: s=4 n=0 p=7 x=0
+(XEN) 8 [0/0]: s=4 n=0 p=9 x=0
+(XEN) 9 [0/0]: s=5 n=0 v=2 x=0
+(XEN) 10 [0/0]: s=4 n=0 p=1 x=0
+(XEN) 11 [0/0]: s=4 n=0 p=8 x=0
+(XEN) 12 [0/0]: s=4 n=0 p=6 x=0
+(XEN) 13 [0/0]: s=4 n=0 p=16 x=0
+(XEN) 14 [0/0]: s=4 n=0 p=19 x=0
+(XEN) 15 [0/0]: s=4 n=0 p=18 x=0
+(XEN) 16 [0/0]: s=4 n=0 p=28 x=0
+(XEN) 17 [0/0]: s=4 n=0 p=48 x=0
+(XEN) 18 [0/0]: s=4 n=0 p=14 x=0
+(XEN) 19 [0/0]: s=4 n=0 p=15 x=0
+(XEN) 20 [0/0]: s=4 n=0 p=29 x=0
+(XEN) 21 [0/0]: s=4 n=0 p=55 x=0
+(XEN) 22 [0/0]: s=3 n=0 d=0 p=6 x=0
+(XEN) 23 [0/0]: s=5 n=0 v=3 x=0
+(XEN) 24 [1/0]: s=4 n=0 p=54 x=0
(XEN) [g: print grant table usage]
(XEN) gnttab_usage_print_all [ key 'g' pressed
(XEN) -------- active -------- -------- shared --------
@@ -272,36 +283,37 @@
(XEN) [i: dump interrupt bindings]
(XEN) Guest interrupt information:
(XEN) IRQ: 0 affinity:00000000,00000000,00000000,00000001 vec:f0
type=IO-APIC-edge status=00000000 mapped, unbound
-(XEN) IRQ: 1 affinity:00000000,00000000,00000000,00000001 vec:28
type=IO-APIC-edge status=00000014 in-flight=0 domain-list=0: 1(-S--),
+(XEN) IRQ: 1 affinity:00000000,00000000,00000000,00000001 vec:28
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 1(-S--),
(XEN) IRQ: 2 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:e2
type=XT-PIC status=00000000 mapped, unbound
-(XEN) IRQ: 3 affinity:00000000,00000000,00000000,00000001 vec:30
type=IO-APIC-edge status=00000002 mapped, unbound
+(XEN) IRQ: 3 affinity:00000000,00000000,00000000,0000000f vec:30
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 4 affinity:00000000,00000000,00000000,00000001 vec:f1
type=IO-APIC-edge status=00000000 mapped, unbound
-(XEN) IRQ: 5 affinity:00000000,00000000,00000000,00000001 vec:38
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 5(-S--),
-(XEN) IRQ: 6 affinity:00000000,00000000,00000000,00000001 vec:40
type=IO-APIC-edge status=00000002 mapped, unbound
-(XEN) IRQ: 7 affinity:00000000,00000000,00000000,00000001 vec:48
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 7(-S--),
+(XEN) IRQ: 5 affinity:00000000,00000000,00000000,00000001 vec:38
type=IO-APIC-edge status=00000002 mapped, unbound
+(XEN) IRQ: 6 affinity:00000000,00000000,00000000,00000001 vec:40
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 6(-S--),
+(XEN) IRQ: 7 affinity:00000000,00000000,00000000,00000001 vec:48
type=IO-APIC-edge status=00000002 mapped, unbound
(XEN) IRQ: 8 affinity:00000000,00000000,00000000,00000001 vec:50
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 8(-S--),
-(XEN) IRQ: 9 affinity:00000000,00000000,00000000,00000001 vec:58
type=IO-APIC-edge status=00000002 mapped, unbound
-(XEN) IRQ: 10 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:ea
type=XT-PIC status=00000002 mapped, unbound
-(XEN) IRQ: 11 affinity:ffffffff,ffffffff,ffffffff,ffffffff vec:eb
type=XT-PIC status=00000002 mapped, unbound
-(XEN) IRQ: 12 affinity:00000000,00000000,00000000,00000001 vec:60
type=IO-APIC-edge status=00000002 mapped, unbound
-(XEN) IRQ: 13 affinity:00000000,00000000,00000000,00000001 vec:68
type=IO-APIC-edge status=00000002 mapped, unbound
-(XEN) IRQ: 14 affinity:00000000,00000000,00000000,00000001 vec:70
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 14(-S--),
-(XEN) IRQ: 15 affinity:00000000,00000000,00000000,00000001 vec:78
type=IO-APIC-edge status=00000014 in-flight=0 domain-list=0: 15(-S--),
-(XEN) IRQ: 16 affinity:00000000,00000000,00000000,00000001 vec:88
type=IO-APIC-level status=00000002 mapped, unbound
-(XEN) IRQ: 18 affinity:00000000,00000000,00000000,00000001 vec:90
type=IO-APIC-level status=00000002 mapped, unbound
-(XEN) IRQ: 19 affinity:00000000,00000000,00000000,00000001 vec:98
type=IO-APIC-level status=00000002 mapped, unbound
-(XEN) IRQ: 28 affinity:00000000,00000000,00000000,00000001 vec:a0
type=IO-APIC-level status=00000002 mapped, unbound
-(XEN) IRQ: 29 affinity:00000000,00000000,00000000,00000001 vec:a8
type=IO-APIC-level status=00000002 mapped, unbound
-(XEN) IRQ: 48 affinity:00000000,00000000,00000000,00000001 vec:b0
type=IO-APIC-level status=00000002 mapped, unbound
-(XEN) IRQ: 54 affinity:00000000,00000000,00000000,00000001 vec:b8
type=IO-APIC-level status=00000002 mapped, unbound
-(XEN) IRQ: 55 affinity:00000000,00000000,00000000,00000001 vec:c0
type=IO-APIC-level status=00000002 mapped, unbound
+(XEN) IRQ: 9 affinity:00000000,00000000,00000000,00000001 vec:58
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 9(-S--),
+(XEN) IRQ: 10 affinity:00000000,00000000,00000000,00000001 vec:60
type=IO-APIC-edge status=00000002 mapped, unbound
+(XEN) IRQ: 11 affinity:00000000,00000000,00000000,00000001 vec:68
type=IO-APIC-edge status=00000002 mapped, unbound
+(XEN) IRQ: 12 affinity:00000000,00000000,00000000,00000001 vec:70
type=IO-APIC-edge status=00000002 mapped, unbound
+(XEN) IRQ: 13 affinity:00000000,00000000,00000000,0000000f vec:78
type=IO-APIC-edge status=00000002 mapped, unbound
+(XEN) IRQ: 14 affinity:00000000,00000000,00000000,00000001 vec:88
type=IO-APIC-edge status=00000010 in-flight=0 domain-list=0: 14(-S--),
+(XEN) IRQ: 15 affinity:00000000,00000000,00000000,00000001 vec:90
type=IO-APIC-edge status=00000014 in-flight=0 domain-list=0: 15(-S--),
+(XEN) IRQ: 16 affinity:00000000,00000000,00000000,00000001 vec:a0
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 16(-S--),
+(XEN) IRQ: 17 affinity:00000000,00000000,00000000,0000000f vec:d8
type=IO-APIC-level status=00000002 mapped, unbound
+(XEN) IRQ: 18 affinity:00000000,00000000,00000000,00000001 vec:b0
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 18(-S--),
+(XEN) IRQ: 19 affinity:00000000,00000000,00000000,00000001 vec:a8
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 19(-S--),
+(XEN) IRQ: 28 affinity:00000000,00000000,00000000,00000001 vec:b8
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 28(-S--),
+(XEN) IRQ: 29 affinity:00000000,00000000,00000000,00000001 vec:d0
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 29(-S--),
+(XEN) IRQ: 48 affinity:00000000,00000000,00000000,00000001 vec:c0
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 48(-S--),
+(XEN) IRQ: 54 affinity:00000000,00000000,00000000,00000001 vec:98
type=IO-APIC-level status=00000010 in-flight=1 domain-list=0: 54(PS-M),
+(XEN) IRQ: 55 affinity:00000000,00000000,00000000,00000001 vec:c8
type=IO-APIC-level status=00000010 in-flight=0 domain-list=0: 55(-S--),
(XEN) IO-APIC interrupt information:
(XEN) IRQ 0 Vec240:
(XEN) Apic 0x00, Pin 2: vector=240, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 1 Vec 40:
(XEN) Apic 0x00, Pin 1: vector=40, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 3 Vec 48:
-(XEN) Apic 0x00, Pin 3: vector=48, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
+(XEN) Apic 0x00, Pin 3: vector=48, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=1, dest_id:15
(XEN) IRQ 4 Vec241:
(XEN) Apic 0x00, Pin 4: vector=241, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 5 Vec 56:
@@ -313,42 +325,48 @@
(XEN) IRQ 8 Vec 80:
(XEN) Apic 0x00, Pin 8: vector=80, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
(XEN) IRQ 9 Vec 88:
-(XEN) Apic 0x00, Pin 9: vector=88, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
-(XEN) IRQ 12 Vec 96:
-(XEN) Apic 0x00, Pin 12: vector=96, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
-(XEN) IRQ 13 Vec104:
-(XEN) Apic 0x00, Pin 13: vector=104, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
-(XEN) IRQ 14 Vec112:
-(XEN) Apic 0x00, Pin 14: vector=112, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
-(XEN) IRQ 15 Vec120:
-(XEN) Apic 0x00, Pin 15: vector=120, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
-(XEN) IRQ 16 Vec136:
-(XEN) Apic 0x00, Pin 16: vector=136, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:1
-(XEN) IRQ 18 Vec144:
-(XEN) Apic 0x00, Pin 18: vector=144, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:1
-(XEN) IRQ 19 Vec152:
-(XEN) Apic 0x00, Pin 19: vector=152, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:1
-(XEN) IRQ 28 Vec160:
-(XEN) Apic 0x01, Pin 4: vector=160, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:1
-(XEN) IRQ 29 Vec168:
-(XEN) Apic 0x01, Pin 5: vector=168, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:1
-(XEN) IRQ 48 Vec176:
-(XEN) Apic 0x02, Pin 0: vector=176, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:1
-(XEN) IRQ 54 Vec184:
-(XEN) Apic 0x02, Pin 6: vector=184, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:1
-(XEN) IRQ 55 Vec192:
-(XEN) Apic 0x02, Pin 7: vector=192, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:1
+(XEN) Apic 0x00, Pin 9: vector=88, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=level, mask=0, dest_id:1
+(XEN) IRQ 10 Vec 96:
+(XEN) Apic 0x00, Pin 10: vector=96, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
+(XEN) IRQ 11 Vec104:
+(XEN) Apic 0x00, Pin 11: vector=104, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
+(XEN) IRQ 12 Vec112:
+(XEN) Apic 0x00, Pin 12: vector=112, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
+(XEN) IRQ 13 Vec120:
+(XEN) Apic 0x00, Pin 13: vector=120, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=1, dest_id:15
+(XEN) IRQ 14 Vec136:
+(XEN) Apic 0x00, Pin 14: vector=136, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
+(XEN) IRQ 15 Vec144:
+(XEN) Apic 0x00, Pin 15: vector=144, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=0, irr=0, trigger=edge, mask=0, dest_id:1
+(XEN) IRQ 16 Vec160:
+(XEN) Apic 0x00, Pin 16: vector=160, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
+(XEN) IRQ 17 Vec216:
+(XEN) Apic 0x00, Pin 17: vector=216, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=1, dest_id:15
+(XEN) IRQ 18 Vec176:
+(XEN) Apic 0x00, Pin 18: vector=176, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
+(XEN) IRQ 19 Vec168:
+(XEN) Apic 0x00, Pin 19: vector=168, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
+(XEN) IRQ 28 Vec184:
+(XEN) Apic 0x01, Pin 4: vector=184, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
+(XEN) IRQ 29 Vec208:
+(XEN) Apic 0x01, Pin 5: vector=208, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
+(XEN) IRQ 48 Vec192:
+(XEN) Apic 0x02, Pin 0: vector=192, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
+(XEN) IRQ 54 Vec152:
+(XEN) Apic 0x02, Pin 6: vector=152, delivery_mode=1, dest_mode=logical,
delivery_status=1, polarity=1, irr=1, trigger=level, mask=0, dest_id:1
+(XEN) IRQ 55 Vec200:
+(XEN) Apic 0x02, Pin 7: vector=200, delivery_mode=1, dest_mode=logical,
delivery_status=0, polarity=1, irr=0, trigger=level, mask=0, dest_id:1
(XEN) [m: memory info]
(XEN) Physical memory information:
-(XEN) Xen heap: 8800kB free
+(XEN) Xen heap: 8792kB free
(XEN) heap[14]: 53216kB free
(XEN) heap[15]: 131072kB free
(XEN) heap[16]: 262144kB free
-(XEN) heap[17]: 462480kB free
+(XEN) heap[17]: 462688kB free
(XEN) heap[18]: 1048576kB free
-(XEN) heap[19]: 1964444kB free
-(XEN) heap[20]: 3869400kB free
-(XEN) Dom heap: 7791332kB free
+(XEN) heap[19]: 1964360kB free
+(XEN) heap[20]: 3869240kB free
+(XEN) Dom heap: 7791296kB free
(XEN) [n: NMI statistics]
(XEN) CPU NMI
(XEN) 0 0
@@ -481,12 +499,12 @@
(XEN) 127 0
(XEN) dom0 vcpu0: NMI neither pending nor masked
(XEN) [q: dump domain (and guest debug) info]
-(XEN) 'q' pressed -> dumping domain info (now=0x14:4637A674)
+(XEN) 'q' pressed -> dumping domain info (now=0x68:B6BD7FB8)
(XEN) General information for domain 0:
(XEN) refcnt=3 dying=0 nr_pages=131072 xenheap_pages=5 dirty_cpus={0}
max_pages=4294967295
(XEN) handle=00000000-0000-0000-0000-000000000000 vm_assist=0000000d
(XEN) Rangesets belonging to domain 0:
-(XEN) I/O Ports { 0-1f, 22-3f, 44-60, 62-9f, a2-3f7, 400-cfb, d00-ffff }
+(XEN) I/O Ports { 0-1f, 22-3f, 44-60, 62-9f, a2-3f7, 400-cfb, d00-1007,
100c-ffff }
(XEN) Interrupts { 0-327 }
(XEN) I/O Memory { 0-febff, fec01-fec7f, fec81-fedff, fee01-ffffffff }
(XEN) Memory pages belonging to domain 0:
@@ -508,7 +526,7 @@
(XEN) credit = 1200
(XEN) credit balance = 0
(XEN) weight = 0
-(XEN) runq_sort = 203
+(XEN) runq_sort = 930
(XEN) default-weight = 256
(XEN) msecs per tick = 10ms
(XEN) credits per msec = 10
@@ -518,24 +536,24 @@
(XEN) idlers: 00000000,00000000,00000000,0000000e
(XEN) active vcpus:
(XEN) sched_smt_power_savings: disabled
-(XEN) NOW=0x00000014492118F9
-(XEN) CPU[00] sort=203, sibling=00000000,00000000,00000000,00000005,
core=00000000,00000000,00000000,00000005
-(XEN) run: [0.0] pri=0 flags=0 cpu=0 credit=0 [w=256]
+(XEN) NOW=0x00000068BCB0ABEA
+(XEN) CPU[00] sort=930, sibling=00000000,00000000,00000000,00000005,
core=00000000,00000000,00000000,00000005
+(XEN) run: [0.0] pri=0 flags=0 cpu=0 credit=-42 [w=256]
(XEN) 1: [32767.0] pri=-64 flags=0 cpu=0
-(XEN) CPU[01] sort=203, sibling=00000000,00000000,00000000,0000000a,
core=00000000,00000000,00000000,0000000a
+(XEN) CPU[01] sort=930, sibling=00000000,00000000,00000000,0000000a,
core=00000000,00000000,00000000,0000000a
(XEN) run: [32767.1] pri=-64 flags=0 cpu=1
-(XEN) CPU[02] sort=203, sibling=00000000,00000000,00000000,00000005,
core=00000000,00000000,00000000,00000005
+(XEN) CPU[02] sort=930, sibling=00000000,00000000,00000000,00000005,
core=00000000,00000000,00000000,00000005
(XEN) run: [32767.2] pri=-64 flags=0 cpu=2
-(XEN) CPU[03] sort=203, sibling=00000000,00000000,00000000,0000000a,
core=00000000,00000000,00000000,0000000a
+(XEN) CPU[03] sort=930, sibling=00000000,00000000,00000000,0000000a,
core=00000000,00000000,00000000,0000000a
(XEN) run: [32767.3] pri=-64 flags=0 cpu=3
(XEN) [s: dump softtsc stats]
-(XEN) TSC not marked as either constant or reliable, warp=1724 (count=1)
+(XEN) TSC not marked as either constant or reliable, warp=892 (count=1)
(XEN) No domains have emulated TSC
(XEN) [t: display multi-cpu clock info]
-(XEN) Synced stime skew: max=440ns avg=440ns samples=1 current=440ns
-(XEN) Synced cycles skew: max=904 avg=904 samples=1 current=904
+(XEN) Synced stime skew: max=192ns avg=192ns samples=1 current=192ns
+(XEN) Synced cycles skew: max=1920 avg=1920 samples=1 current=1920
(XEN) [u: dump numa info]
-(XEN) 'u' pressed -> dumping numa info (now-0x14:52954228)
+(XEN) 'u' pressed -> dumping numa info (now-0x68:C639FF12)
(XEN) idx0 -> NODE0 start->0 size->2129920
(XEN) phys_to_nid(0000000000001000) -> 0 should be 0
(XEN) CPU0 -> NODE0
@@ -546,7 +564,7 @@
(XEN) Domain 0 (total: 131072):
(XEN) Node 0: 131072
(XEN) [z: print ioapic info]
-(XEN) number of MP IRQ sources: 23.
+(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #2 registers: 24.
(XEN) number of IO-APIC #3 registers: 24.
(XEN) number of IO-APIC #4 registers: 24.
@@ -569,23 +587,23 @@
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 001 01 0 0 0 0 0 1 1 28
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
-(XEN) 03 001 01 0 0 0 0 0 1 1 30
+(XEN) 03 00F 0F 1 0 0 0 0 1 1 30
(XEN) 04 001 01 0 0 0 0 0 1 1 F1
(XEN) 05 001 01 0 0 0 0 0 1 1 38
(XEN) 06 001 01 0 0 0 0 0 1 1 40
(XEN) 07 001 01 0 0 0 0 0 1 1 48
(XEN) 08 001 01 0 0 0 0 0 1 1 50
-(XEN) 09 001 01 0 0 0 0 0 1 1 58
-(XEN) 0a 000 00 1 0 0 0 0 0 0 00
-(XEN) 0b 000 00 1 0 0 0 0 0 0 00
-(XEN) 0c 001 01 0 0 0 0 0 1 1 60
-(XEN) 0d 001 01 0 0 0 0 0 1 1 68
-(XEN) 0e 001 01 0 0 0 0 0 1 1 70
-(XEN) 0f 001 01 0 0 0 0 0 1 1 78
-(XEN) 10 001 01 1 1 0 1 0 1 1 88
-(XEN) 11 000 00 1 0 0 0 0 0 0 00
-(XEN) 12 001 01 1 1 0 1 0 1 1 90
-(XEN) 13 001 01 1 1 0 1 0 1 1 98
+(XEN) 09 001 01 0 1 0 0 0 1 1 58
+(XEN) 0a 001 01 0 0 0 0 0 1 1 60
+(XEN) 0b 001 01 0 0 0 0 0 1 1 68
+(XEN) 0c 001 01 0 0 0 0 0 1 1 70
+(XEN) 0d 00F 0F 1 0 0 0 0 1 1 78
+(XEN) 0e 001 01 0 0 0 0 0 1 1 88
+(XEN) 0f 001 01 0 0 0 0 0 1 1 90
+(XEN) 10 001 01 0 1 0 1 0 1 1 A0
+(XEN) 11 00F 0F 1 1 0 1 0 1 1 D8
+(XEN) 12 001 01 0 1 0 1 0 1 1 B0
+(XEN) 13 001 01 0 1 0 1 0 1 1 A8
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
@@ -609,8 +627,8 @@
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
-(XEN) 04 001 01 1 1 0 1 0 1 1 A0
-(XEN) 05 001 01 1 1 0 1 0 1 1 A8
+(XEN) 04 001 01 0 1 0 1 0 1 1 B8
+(XEN) 05 001 01 0 1 0 1 0 1 1 D0
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
@@ -644,14 +662,14 @@
(XEN) ....... : Boot DT : 1
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
-(XEN) 00 001 01 1 1 0 1 0 1 1 B0
+(XEN) 00 001 01 0 1 0 1 0 1 1 C0
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
-(XEN) 06 001 01 1 1 0 1 0 1 1 B8
-(XEN) 07 001 01 1 1 0 1 0 1 1 C0
+(XEN) 06 001 01 0 1 1 1 1 1 1 98
+(XEN) 07 001 01 0 1 0 1 0 1 1 C8
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
@@ -679,16 +697,19 @@
(XEN) IRQ72 -> 0:7
(XEN) IRQ80 -> 0:8
(XEN) IRQ88 -> 0:9
-(XEN) IRQ96 -> 0:12
-(XEN) IRQ104 -> 0:13
-(XEN) IRQ112 -> 0:14
-(XEN) IRQ120 -> 0:15
-(XEN) IRQ136 -> 0:16
-(XEN) IRQ144 -> 0:18
-(XEN) IRQ152 -> 0:19
-(XEN) IRQ160 -> 1:4
-(XEN) IRQ168 -> 1:5
-(XEN) IRQ176 -> 2:0
-(XEN) IRQ184 -> 2:6
-(XEN) IRQ192 -> 2:7
+(XEN) IRQ96 -> 0:10
+(XEN) IRQ104 -> 0:11
+(XEN) IRQ112 -> 0:12
+(XEN) IRQ120 -> 0:13
+(XEN) IRQ136 -> 0:14
+(XEN) IRQ144 -> 0:15
+(XEN) IRQ160 -> 0:16
+(XEN) IRQ216 -> 0:17
+(XEN) IRQ176 -> 0:18
+(XEN) IRQ168 -> 0:19
+(XEN) IRQ184 -> 1:4
+(XEN) IRQ208 -> 1:5
+(XEN) IRQ192 -> 2:0
+(XEN) IRQ152 -> 2:6
+(XEN) IRQ200 -> 2:7
(XEN) .................................... done.
pgpz24CWV0iQ3.pgp
Description: PGP signature
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home