[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.16-02166-gc2df6e2 (daniel@xxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #26 SMP Wed Jul 21 17:29:06 EDT 2010 [ 0.000000] Command line: root=/dev/mapper/vg_mossclam-lv_root xen-pciback.hide=(00:02.0)(00:02.1) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] xen_release_chunk: looking at area pfn 9f-a0: 1 pages freed [ 0.000000] xen_release_chunk: looking at area pfn d0000-e0000: 65536 pages freed [ 0.000000] released 65537 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000cf3ff800 (usable) [ 0.000000] Xen: 00000000cf3ff800 - 00000000cf453c00 (ACPI NVS) [ 0.000000] Xen: 00000000cf453c00 - 00000000cf455c00 (ACPI data) [ 0.000000] Xen: 00000000cf455c00 - 00000000d0000000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] Xen: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] Xen: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0xcf3ff max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cf3ff000 [ 0.000000] 0000000000 - 00cf3ff000 page 4k [ 0.000000] kernel direct mapping tables up to cf3ff000 @ 100000-77f000 [ 0.000000] RAMDISK: 01be5000 - 044ff800 [ 0.000000] ACPI: RSDP 00000000000fec00 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT 00000000000fc5b3 0008C (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: FACP 00000000000fc6e3 000F4 (v03 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: DSDT 00000000fff782fe 04596 (v01 DELL dt_ex 00001000 INTL 20050624) [ 0.000000] ACPI: FACS 00000000cf3ff800 00040 [ 0.000000] ACPI: SSDT 00000000fff7c9b3 000AA (v01 DELL st_ex 00001000 INTL 20050624) [ 0.000000] ACPI: APIC 00000000000fc7d7 00092 (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: BOOT 00000000000fc869 00028 (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: ASF! 00000000000fc891 00096 (v32 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: MCFG 00000000000fc927 0003E (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: HPET 00000000000fc965 00038 (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: TCPA 00000000000fcbc1 00032 (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: DMAR 00000000000fcbf3 000F0 (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: SLIC 00000000000fc99d 00176 (v01 DELL B9K 00000015 ASL 00000061) [ 0.000000] ACPI: SSDT 00000000cf3ff840 001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000cf3ffc49 001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000cf400052 00140 (v01 DpgPmm CpuPm 00000010 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000cf3ff000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000cf3ff000 [ 0.000000] NODE_DATA [0000000000008000 - 000000000001ffff] [ 0.000000] bootmap [0000000000020000 - 0000000000039e7f] pages 1a [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00cf3ff000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0004c62000 - 0004c8d000] XEN PAGETABLES ==> [0004c62000 - 0004c8d000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001bc4fd8] TEXT DATA BSS ==> [0001000000 - 0001bc4fd8] [ 0.000000] #4 [0001be5000 - 00044ff800] RAMDISK ==> [0001be5000 - 00044ff800] [ 0.000000] #5 [0004500000 - 0004c62000] XEN START INFO ==> [0004500000 - 0004c62000] [ 0.000000] #6 [0001bc5000 - 0001bc51f0] BRK ==> [0001bc5000 - 0001bc51f0] [ 0.000000] #7 [0000100000 - 0000751000] PGTABLE ==> [0000100000 - 0000751000] [ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cf3ff [ 0.000000] On node 0 totalpages: 848797 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1620 pages reserved [ 0.000000] DMA zone: 2322 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11550 pages used for memmap [ 0.000000] DMA32 zone: 833249 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 256 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.1-unstable (preserve-AD) (dom0) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880004cac000 s91800 r8192 d22888 u122880 [ 0.000000] pcpu-alloc: s91800 r8192 d22888 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] trying to map vcpu_info 0 at ffff880004cb7020, mfn 11ccb7, offset 32 [ 0.000000] cpu 0 using vcpu_info at ffff880004cb7020 [ 0.000000] trying to map vcpu_info 1 at ffff880004cd5020, mfn 11ccd5, offset 32 [ 0.000000] cpu 1 using vcpu_info at ffff880004cd5020 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 835571 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/mapper/vg_mossclam-lv_root xen-pciback.hide=(00:02.0)(00:02.1) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880007e27000 - ffff88000be27000 [ 0.000000] DMA: software IO TLB at phys 0x7e27000 - 0xbe27000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880007e27000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff88000be87000 size=32768 [ 0.000000] Memory: 3213664k/3395580k available (5536k kernel code, 392k absent, 181524k reserved, 3388k data, 1568k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:768 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 34078720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] alloc irq_desc for 767 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] Detected 3158.816 MHz processor. [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 6317.63 BogoMIPS (lpj=3158816) [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.002839] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.005179] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.006181] Mount-cache hash table entries: 256 [ 0.006452] Initializing cgroup subsys ns [ 0.006511] Initializing cgroup subsys cpuacct [ 0.006569] Initializing cgroup subsys memory [ 0.006641] Initializing cgroup subsys devices [ 0.006698] Initializing cgroup subsys freezer [ 0.006754] Initializing cgroup subsys net_cls [ 0.006856] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.006929] CPU: L2 cache: 6144K [ 0.006983] CPU 0/0x0 -> Node 0 [ 0.007003] CPU: Physical Processor ID: 0 [ 0.007057] CPU: Processor Core ID: 0 [ 0.007114] mce: CPU supports 6 MCE banks [ 0.007185] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only. [ 0.007321] SMP alternatives: switching to UP code [ 0.009998] ACPI: Core revision 20090903 [ 0.206851] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.206915] ftrace: allocating 22892 entries in 90 pages [ 0.207035] alloc irq_desc for 766 on node 0 [ 0.207037] alloc kstat_irqs on node 0 [ 0.207044] alloc irq_desc for 765 on node 0 [ 0.207046] alloc kstat_irqs on node 0 [ 0.207051] alloc irq_desc for 764 on node 0 [ 0.207052] alloc kstat_irqs on node 0 [ 0.207056] alloc irq_desc for 763 on node 0 [ 0.207058] alloc kstat_irqs on node 0 [ 0.207333] installing Xen timer for CPU 1 [ 0.207392] alloc irq_desc for 762 on node 0 [ 0.207394] alloc kstat_irqs on node 0 [ 0.207424] SMP alternatives: switching to SMP code [ 0.207968] alloc irq_desc for 761 on node 0 [ 0.207968] alloc kstat_irqs on node 0 [ 0.207974] alloc irq_desc for 760 on node 0 [ 0.207976] alloc kstat_irqs on node 0 [ 0.207980] alloc irq_desc for 759 on node 0 [ 0.207982] alloc kstat_irqs on node 0 [ 0.207986] alloc irq_desc for 758 on node 0 [ 0.207988] alloc kstat_irqs on node 0 [ 0.000999] Initializing CPU#1 [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 6144K [ 0.000999] CPU 1/0x0 -> Node 0 [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 1 [ 0.208072] Brought up 2 CPUs [ 0.208454] CPU0 attaching sched-domain: [ 0.208457] domain 0: span 0-1 level CPU [ 0.208460] groups: 0 1 [ 0.208466] CPU1 attaching sched-domain: [ 0.208468] domain 0: span 0-1 level CPU [ 0.208470] groups: 1 0 [ 0.209003] Grant table initialized [ 0.209060] regulator: core version 0.5 [ 0.209116] Time: 15:57:12 Date: 07/23/10 [ 0.209116] NET: Registered protocol family 16 [ 0.209228] alloc irq_desc for 757 on node 0 [ 0.209230] alloc kstat_irqs on node 0 [ 0.209598] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.209695] ACPI: bus type pci registered [ 0.210011] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.210074] PCI: MCFG area at e0000000 reserved in E820 [ 0.255771] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.255829] PCI: Using configuration type 1 for base access [ 0.257996] bio: create slab at 0 [ 0.258962] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.258962] ACPI: EC: Look up EC in DSDT [ 0.342123] ACPI: Interpreter enabled [ 0.342177] ACPI: (supports S0 S1 S3 S4 S5) [ 0.342334] ACPI: Using IOAPIC for interrupt routing [ 0.457033] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.464945] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.465158] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.465216] pci 0000:00:01.0: PME# disabled [ 0.465317] pci 0000:00:02.0: reg 10 32bit mmio: [0xfea00000-0xfea7ffff] [ 0.465324] pci 0000:00:02.0: reg 14 io port: [0xec90-0xec97] [ 0.465332] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.465339] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.465419] pci 0000:00:02.1: reg 10 32bit mmio: [0xfea80000-0xfeafffff] [ 0.465579] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe9e0000-0xfe9fffff] [ 0.465588] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe9db000-0xfe9dbfff] [ 0.465597] pci 0000:00:19.0: reg 18 io port: [0xecc0-0xecdf] [ 0.465663] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.465721] pci 0000:00:19.0: PME# disabled [ 0.465852] pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f] [ 0.465951] pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f] [ 0.465951] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe9d9c00-0xfe9d9fff] [ 0.465951] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.465951] pci 0000:00:1a.7: PME# disabled [ 0.465951] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9dc000-0xfe9dffff] [ 0.465951] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.465951] pci 0000:00:1b.0: PME# disabled [ 0.465951] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.465951] pci 0000:00:1c.0: PME# disabled [ 0.465951] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f] [ 0.465951] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f] [ 0.465951] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f] [ 0.465951] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980800-0xff980bff] [ 0.465951] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.465951] pci 0000:00:1d.7: PME# disabled [ 0.465951] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.465951] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO [ 0.465951] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f) [ 0.465951] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007) [ 0.465951] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07] [ 0.465951] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13] [ 0.465951] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27] [ 0.465951] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33] [ 0.465951] pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfedf] [ 0.465951] pci 0000:00:1f.2: reg 24 32bit mmio: [0xff970000-0xff9707ff] [ 0.465951] pci 0000:00:1f.2: PME# supported from D3hot [ 0.465951] pci 0000:00:1f.2: PME# disabled [ 0.467988] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe9d9b00-0xfe9d9bff] [ 0.468010] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff] [ 0.468105] pci 0000:00:01.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff] [ 0.468173] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe700000-0xfe7fffff] [ 0.468247] pci 0000:00:1e.0: transparent bridge [ 0.468334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.468741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] [ 0.469235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.469628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 1.640951] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 1.640951] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 1.642454] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 1.643418] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 1.644387] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 1.645416] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 1.646382] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 1.647349] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 1.647801] sync cpu 0 get result 1 max_id 1 [ 1.647809] sync cpu 1 get result 1 max_id 1 [ 1.647812] alloc irq_desc for 756 on node 0 [ 1.647814] alloc kstat_irqs on node 0 [ 1.647840] xen_balloon: Initialising balloon driver with page order 0. [ 1.647933] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.647951] vgaarb: loaded [ 1.648049] SCSI subsystem initialized [ 1.648110] libata version 3.00 loaded. [ 1.648110] usbcore: registered new interface driver usbfs [ 1.648110] usbcore: registered new interface driver hub [ 1.648110] usbcore: registered new device driver usb [ 1.649009] PCI: Using ACPI for IRQ routing [ 1.649212] NetLabel: Initializing [ 1.649263] NetLabel: domain hash size = 128 [ 1.649314] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.649384] NetLabel: unlabeled traffic allowed by default [ 1.649446] Switching to clocksource xen [ 1.649446] kstop/0 used greatest stack depth: 7024 bytes left [ 1.660895] pnp: PnP ACPI init [ 1.660965] ACPI: bus type pnp registered [ 1.674800] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 1.674890] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 1.675527] xen: registering gsi 13 triggering 1 polarity 0 [ 1.675530] xen_allocate_pirq: returning irq 13 for gsi 13 [ 1.675584] xen: --> irq=13 [ 1.676058] xen: registering gsi 8 triggering 1 polarity 0 [ 1.676060] xen_allocate_pirq: returning irq 8 for gsi 8 [ 1.676114] xen: --> irq=8 [ 1.693296] xen: registering gsi 7 triggering 1 polarity 0 [ 1.693298] xen_allocate_pirq: returning irq 7 for gsi 7 [ 1.693352] xen: --> irq=7 [ 1.700290] xen: registering gsi 4 triggering 1 polarity 0 [ 1.700293] xen_allocate_pirq: returning irq 4 for gsi 4 [ 1.700346] xen: --> irq=4 [ 1.700348] Already setup the GSI :4 [ 1.706546] xen: registering gsi 3 triggering 1 polarity 0 [ 1.706549] xen_allocate_pirq: returning irq 3 for gsi 3 [ 1.706602] xen: --> irq=3 [ 1.724928] pnp: PnP ACPI: found 11 devices [ 1.724981] ACPI: ACPI bus type pnp unregistered [ 1.725040] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 1.725121] pciback 0000:00:02.0: seizing device [ 1.725177] pciback 0000:00:02.1: seizing device [ 1.729370] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 1.729472] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.729526] pci 0000:00:01.0: IO window: disabled [ 1.729582] pci 0000:00:01.0: MEM window: 0xfe800000-0xfe8fffff [ 1.729639] pci 0000:00:01.0: PREFETCH window: disabled [ 1.729699] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 1.729755] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 1.729814] pci 0000:00:1c.0: MEM window: 0xfe700000-0xfe7fffff [ 1.729872] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f01fffff [ 1.729963] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 1.730017] pci 0000:00:1e.0: IO window: disabled [ 1.730074] pci 0000:00:1e.0: MEM window: disabled [ 1.730130] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.730199] xen: registering gsi 16 triggering 0 polarity 1 [ 1.730206] alloc irq_desc for 16 on node 0 [ 1.730208] alloc kstat_irqs on node 0 [ 1.730211] xen: --> irq=16 [ 1.730216] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.730251] pci 0000:00:01.0: setting latency timer to 64 [ 1.730251] xen: registering gsi 16 triggering 0 polarity 1 [ 1.730251] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.730251] xen: --> irq=16 [ 1.730349] Already setup the GSI :16 [ 1.730400] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.730459] pci 0000:00:1c.0: setting latency timer to 64 [ 1.730469] pci 0000:00:1e.0: setting latency timer to 64 [ 1.730474] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.730476] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.730478] pci_bus 0000:01: resource 1 mem: [0xfe800000-0xfe8fffff] [ 1.730481] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 1.730483] pci_bus 0000:02: resource 1 mem: [0xfe700000-0xfe7fffff] [ 1.730485] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf01fffff] [ 1.730487] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 1.730489] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.730521] NET: Registered protocol family 2 [ 1.731209] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.736142] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.740084] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.740614] TCP: Hash tables configured (established 524288 bind 65536) [ 1.740670] TCP reno registered [ 1.740833] NET: Registered protocol family 1 [ 1.740906] pciback 0000:00:02.0: Boot video device [ 1.741143] Trying to unpack rootfs image as initramfs... [ 1.800503] debug: unmapping init memory ffff880001be5000..ffff880004500000 [ 1.819106] DMA-API: preallocated 32768 debug entries [ 1.819167] DMA-API: debugging enabled by kernel config [ 1.819222] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.819253] DMA: Placing 64MB software IO TLB between ffff880007e27000 - ffff88000be27000 [ 1.819253] DMA: software IO TLB at phys 0x7e27000 - 0xbe27000 [ 1.819480] Simple Boot Flag at 0x7a set to 0x80 [ 1.819910] audit: initializing netlink socket (disabled) [ 1.819984] type=2000 audit(1279900634.545:1): initialized [ 1.826225] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.827587] VFS: Disk quotas dquot_6.5.2 [ 1.827688] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.828212] msgmni has been set to 6276 [ 1.828347] SELinux: Registering netfilter hooks [ 1.828623] cryptomgr_test used greatest stack depth: 5792 bytes left [ 1.828866] cryptomgr_test used greatest stack depth: 5728 bytes left [ 1.828960] alg: No test for stdrng (krng) [ 1.829066] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.829153] io scheduler noop registered [ 1.829204] io scheduler anticipatory registered [ 1.829257] io scheduler deadline registered [ 1.829329] io scheduler cfq registered (default) [ 1.829608] alloc irq_desc for 755 on node 0 [ 1.829611] alloc kstat_irqs on node 0 [ 1.829641] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.829804] alloc irq_desc for 754 on node 0 [ 1.829806] alloc kstat_irqs on node 0 [ 1.829832] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.829944] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.830054] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.830111] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.830711] pci-stub: invalid id string "" [ 1.830898] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.830992] ACPI: Power Button [VBTN] [ 1.831081] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.831167] ACPI: Power Button [PWRF] [ 1.945055] Event-channel device installed. [ 1.945187] xen: registering gsi 16 triggering 0 polarity 1 [ 1.945189] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.945243] xen: --> irq=16 [ 1.945247] Already setup the GSI :16 [ 1.945253] pciback 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.945253] pciback 0000:00:02.0: PCI INT A disabled [ 1.951834] blktap_device_init: blktap device major 253 [ 1.951927] blktap_ring_init: blktap ring major: 251 [ 1.954484] registering netback [ 1.954627] alloc irq_desc for 753 on node 0 [ 1.954630] alloc kstat_irqs on node 0 [ 1.955626] alloc irq_desc for 752 on node 0 [ 1.955628] alloc kstat_irqs on node 0 [ 1.956108] hpet_acpi_add: no address or irqs in _CRS [ 1.956218] Non-volatile memory driver v1.3 [ 1.956298] Linux agpgart interface v0.103 [ 1.956397] agpgart-intel 0000:00:00.0: Intel Q35 Chipset [ 1.958158] agpgart-intel 0000:00:00.0: detected 6140K stolen memory [ 2.014476] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 2.014702] tpm_tis 00:09: 1.2 TPM (device-id 0x4A10, rev-id 78) [ 2.068056] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.312105] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.312625] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.314191] brd: module loaded [ 2.314954] loop: module loaded [ 2.315005] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.315368] ahci 0000:00:1f.2: version 3.0 [ 2.315390] xen: registering gsi 18 triggering 0 polarity 1 [ 2.315397] alloc irq_desc for 18 on node 0 [ 2.315400] alloc kstat_irqs on node 0 [ 2.315406] xen: --> irq=18 [ 2.315414] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.315559] alloc irq_desc for 751 on node 0 [ 2.315562] alloc kstat_irqs on node 0 [ 2.315676] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x23 impl SATA mode [ 2.315816] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ccc ems sxs [ 2.315960] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.319123] scsi0 : ahci [ 2.319323] scsi1 : ahci [ 2.319509] scsi2 : ahci [ 2.319701] scsi3 : ahci [ 2.319887] scsi4 : ahci [ 2.320092] scsi5 : ahci [ 2.322028] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 751 [ 2.322169] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 751 [ 2.322306] ata3: DUMMY [ 2.322388] ata4: DUMMY [ 2.322469] ata5: DUMMY [ 2.322552] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 751 [ 2.322796] Fixed MDIO Bus: probed [ 2.322887] NetXen Network Driver version 4.0.50 [ 2.323078] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.323194] xen: registering gsi 22 triggering 0 polarity 1 [ 2.323199] alloc irq_desc for 22 on node 0 [ 2.323202] alloc kstat_irqs on node 0 [ 2.323207] xen: --> irq=22 [ 2.323214] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.323323] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.323329] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.323491] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.324005] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.328417] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 2.328442] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe9d9c00 [ 2.338022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.338154] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.338248] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.338383] usb usb1: Product: EHCI Host Controller [ 2.338471] usb usb1: Manufacturer: Linux 2.6.32.16-02166-gc2df6e2 ehci_hcd [ 2.338564] usb usb1: SerialNumber: 0000:00:1a.7 [ 2.338704] usb usb1: configuration #1 chosen from 1 choice [ 2.338836] hub 1-0:1.0: USB hub found [ 2.338952] hub 1-0:1.0: 6 ports detected [ 2.339144] xen: registering gsi 23 triggering 0 polarity 1 [ 2.339149] alloc irq_desc for 23 on node 0 [ 2.339152] alloc kstat_irqs on node 0 [ 2.339157] xen: --> irq=23 [ 2.339164] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.339273] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.339278] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.339424] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.339639] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.343614] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.343637] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800 [ 2.353022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.353138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.353231] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.353367] usb usb2: Product: EHCI Host Controller [ 2.353454] usb usb2: Manufacturer: Linux 2.6.32.16-02166-gc2df6e2 ehci_hcd [ 2.353548] usb usb2: SerialNumber: 0000:00:1d.7 [ 2.353683] usb usb2: configuration #1 chosen from 1 choice [ 2.353812] hub 2-0:1.0: USB hub found [ 2.353930] hub 2-0:1.0: 6 ports detected [ 2.354110] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.354217] uhci_hcd: USB Universal Host Controller Interface driver [ 2.354378] xen: registering gsi 16 triggering 0 polarity 1 [ 2.354382] xen_allocate_pirq: returning irq 16 for gsi 16 [ 2.354472] xen: --> irq=16 [ 2.354476] Already setup the GSI :16 [ 2.354561] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.354662] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.354668] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.354804] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.354990] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 [ 2.355190] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.355285] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.355420] usb usb3: Product: UHCI Host Controller [ 2.355508] usb usb3: Manufacturer: Linux 2.6.32.16-02166-gc2df6e2 uhci_hcd [ 2.355601] usb usb3: SerialNumber: 0000:00:1a.0 [ 2.355744] usb usb3: configuration #1 chosen from 1 choice [ 2.355866] hub 3-0:1.0: USB hub found [ 2.355980] hub 3-0:1.0: 2 ports detected [ 2.356155] xen: registering gsi 17 triggering 0 polarity 1 [ 2.356160] alloc irq_desc for 17 on node 0 [ 2.356163] alloc kstat_irqs on node 0 [ 2.356168] xen: --> irq=17 [ 2.356174] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.356277] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.356283] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.356410] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.356594] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 [ 2.356778] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.356872] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.357009] usb usb4: Product: UHCI Host Controller [ 2.357071] usb usb4: Manufacturer: Linux 2.6.32.16-02166-gc2df6e2 uhci_hcd [ 2.357071] usb usb4: SerialNumber: 0000:00:1a.1 [ 2.357340] usb usb4: configuration #1 chosen from 1 choice [ 2.357462] hub 4-0:1.0: USB hub found [ 2.357576] hub 4-0:1.0: 2 ports detected [ 2.357734] xen: registering gsi 23 triggering 0 polarity 1 [ 2.357738] xen_allocate_pirq: returning irq 23 for gsi 23 [ 2.357827] xen: --> irq=23 [ 2.357831] Already setup the GSI :23 [ 2.357917] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.358019] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.358024] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.358186] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.358358] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 [ 2.358541] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.358635] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.358771] usb usb5: Product: UHCI Host Controller [ 2.358859] usb usb5: Manufacturer: Linux 2.6.32.16-02166-gc2df6e2 uhci_hcd [ 2.358952] usb usb5: SerialNumber: 0000:00:1d.0 [ 2.359101] usb usb5: configuration #1 chosen from 1 choice [ 2.359223] hub 5-0:1.0: USB hub found [ 2.359337] hub 5-0:1.0: 2 ports detected [ 2.359495] xen: registering gsi 17 triggering 0 polarity 1 [ 2.359499] xen_allocate_pirq: returning irq 17 for gsi 17 [ 2.359588] xen: --> irq=17 [ 2.359592] Already setup the GSI :17 [ 2.359678] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.359779] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.359784] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.359919] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 2.360102] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 [ 2.360295] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.360390] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.360525] usb usb6: Product: UHCI Host Controller [ 2.360613] usb usb6: Manufacturer: Linux 2.6.32.16-02166-gc2df6e2 uhci_hcd [ 2.360706] usb usb6: SerialNumber: 0000:00:1d.1 [ 2.360849] usb usb6: configuration #1 chosen from 1 choice [ 2.360972] hub 6-0:1.0: USB hub found [ 2.361096] hub 6-0:1.0: 2 ports detected [ 2.361247] xen: registering gsi 18 triggering 0 polarity 1 [ 2.361251] xen_allocate_pirq: returning irq 18 for gsi 18 [ 2.361341] xen: --> irq=18 [ 2.361344] Already setup the GSI :18 [ 2.361430] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.361531] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.361537] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.361671] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 2.361856] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 2.362052] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.362146] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.362282] usb usb7: Product: UHCI Host Controller [ 2.362370] usb usb7: Manufacturer: Linux 2.6.32.16-02166-gc2df6e2 uhci_hcd [ 2.362463] usb usb7: SerialNumber: 0000:00:1d.2 [ 2.362599] usb usb7: configuration #1 chosen from 1 choice [ 2.362728] hub 7-0:1.0: USB hub found [ 2.362843] hub 7-0:1.0: 2 ports detected [ 2.363062] PNP: No PS/2 controller found. Probing ports directly. [ 2.365921] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.365921] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.366194] mice: PS/2 mouse device common for all mice [ 2.366494] rtc_cmos 00:05: RTC can wake from S4 [ 2.366624] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.366750] rtc0: alarms up to one day, 242 bytes nvram [ 2.366996] device-mapper: uevent: version 1.0.3 [ 2.367227] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 2.367487] cpuidle: using governor ladder [ 2.367574] cpuidle: using governor menu [ 2.368087] usbcore: registered new interface driver hiddev [ 2.368201] usbcore: registered new interface driver usbhid [ 2.368299] usbhid: v2.6:USB HID core driver [ 2.368410] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.368668] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 2.368805] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 2.368942] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 2.369486] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.369584] TCP cubic registered [ 2.369668] Initializing XFRM netlink socket [ 2.369774] NET: Registered protocol family 17 [ 2.369974] PM: Resume from disk failed. [ 2.369998] registered taskstats version 1 [ 2.550732] Magic number: 2:767:993 [ 2.550896] rtc_cmos 00:05: setting system clock to 2010-07-23 15:57:14 UTC (1279900634) [ 2.551103] Initalizing network drop monitor service [ 2.629026] ata6: SATA link down (SStatus 4 SControl 300) [ 2.847022] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 3.010194] usb 3-1: New USB device found, idVendor=0624, idProduct=0200 [ 3.010288] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.010382] usb 3-1: Product: USB DSRIQ [ 3.010468] usb 3-1: Manufacturer: Avocent [ 3.010621] usb 3-1: configuration #1 chosen from 1 choice [ 3.045736] input: Avocent USB DSRIQ as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3 [ 3.045946] generic-usb 0003:0624:0200.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent USB DSRIQ] on usb-0000:00:1a.0-1/input0 [ 3.076902] input: Avocent USB DSRIQ as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4 [ 3.077152] generic-usb 0003:0624:0200.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent USB DSRIQ] on usb-0000:00:1a.0-1/input1 [ 3.200026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.200142] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.200798] ata1.00: ATA-8: ST3250310AS, 3.ADA, max UDMA/133 [ 3.200890] ata1.00: 488281250 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.201700] ata1.00: configured for UDMA/133 [ 3.202411] ata2.00: ATAPI: TEAC DVD-ROM DV28SV, R.0C, max UDMA/100 [ 3.206200] ata2.00: configured for UDMA/100 [ 3.212151] scsi 0:0:0:0: Direct-Access ATA ST3250310AS 3.AD PQ: 0 ANSI: 5 [ 3.212475] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.212531] sd 0:0:0:0: [sda] 488281250 512-byte logical blocks: (250 GB/232 GiB) [ 3.212680] sd 0:0:0:0: [sda] Write Protect is off [ 3.212683] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.212759] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.213132] sda: sda1 sda2 [ 3.220178] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.235451] scsi 1:0:0:0: CD-ROM TEAC DVD-ROM DV28SV R.0C PQ: 0 ANSI: 5 [ 3.248224] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 3.248319] Uniform CD-ROM driver Revision: 3.20 [ 3.248535] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.248601] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.248772] debug: unmapping init memory ffffffff818b9000..ffffffff81a41000 [ 3.254079] mknod used greatest stack depth: 5368 bytes left [ 3.267183] modprobe used greatest stack depth: 5144 bytes left [ 3.281438] mkdir used greatest stack depth: 5064 bytes left [ 3.283733] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 3.291891] dracut: dracut-005-3.fc13 [ 3.308359] udev: starting version 151 [ 3.392277] udevadm used greatest stack depth: 5016 bytes left [ 3.401923] dracut: Starting plymouth daemon [ 3.445811] usb 4-1: New USB device found, idVendor=413c, idProduct=2005 [ 3.445908] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.446005] usb 4-1: Product: DELL USB Keyboard [ 3.446005] usb 4-1: Manufacturer: DELL [ 3.446005] usb 4-1: configuration #1 chosen from 1 choice [ 3.466272] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input5 [ 3.466490] generic-usb 0003:413C:2005.0003: input,hidraw2: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1a.1-1/input0 [ 3.822026] dracut: Scanning devices sda2 for LVM volume groups [ 3.837580] dracut: Reading all physical volumes. This may take a while... [ 3.837758] dracut: Found volume group "vg_mossclam" using metadata type lvm2 [ 3.902516] blkid used greatest stack depth: 4648 bytes left [ 4.012707] blkid used greatest stack depth: 4584 bytes left [ 4.421925] dracut: 5 logical volume(s) in volume group "vg_mossclam" now active [ 4.492527] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 4.556231] dracut: Mounted root filesystem /dev/mapper/vg_mossclam-lv_root [ 4.645141] dracut: Loading SELinux policy [ 4.900177] type=1404 audit(1279900636.849:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 5.057193] SELinux: 8192 avtab hash slots, 198429 rules. [ 5.109640] SELinux: 8192 avtab hash slots, 198429 rules. [ 5.224201] SELinux: 9 users, 13 roles, 3305 types, 164 bools, 1 sens, 1024 cats [ 5.224207] SELinux: 77 classes, 198429 rules [ 5.228604] SELinux: Completing initialization. [ 5.228606] SELinux: Setting up existing superblocks. [ 5.228622] SELinux: initialized (dev dm-0, type ext4), uses xattr [ 5.228743] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.228761] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.237696] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 5.237709] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 5.237716] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 5.237739] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 5.237755] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 5.237774] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 5.237817] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts [ 5.237822] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 5.237826] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 5.237831] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 5.239066] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 5.239070] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.239091] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 5.239114] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 5.239118] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 5.239263] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 5.256759] type=1403 audit(1279900637.205:3): policy loaded auid=4294967295 ses=4294967295 [ 5.265654] load_policy used greatest stack depth: 3672 bytes left [ 5.410646] dracut: Switching root [ 6.158597] readahead: starting [ 7.999815] udev: starting version 151 [ 8.777014] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 9.064365] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 9.071563] iTCO_vendor_support: vendor-support=0 [ 9.090571] xen: registering gsi 18 triggering 0 polarity 1 [ 9.090576] xen_allocate_pirq: returning irq 18 for gsi 18 [ 9.090579] xen: --> irq=18 [ 9.090584] Already setup the GSI :18 [ 9.090588] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.400262] parport_pc 00:06: reported by Plug and Play ACPI [ 9.400345] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 9.498995] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 9.499111] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 9.499137] iTCO_wdt: No card detected [ 9.649176] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 9.649181] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 9.649246] xen: registering gsi 21 triggering 0 polarity 1 [ 9.649265] alloc irq_desc for 21 on node 0 [ 9.649268] alloc kstat_irqs on node 0 [ 9.649274] xen: --> irq=21 [ 9.649286] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 9.649300] e1000e 0000:00:19.0: setting latency timer to 64 [ 9.649447] alloc irq_desc for 750 on node 0 [ 9.649449] alloc kstat_irqs on node 0 [ 9.657527] platform microcode: firmware: requesting intel-ucode/06-17-06 [ 9.795174] platform microcode: firmware: requesting intel-ucode/06-17-06 [ 9.801635] Microcode Update Driver: v2.00 , Peter Oruba [ 9.823533] ppdev: user-space parallel port driver [ 9.860346] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:70:3d:6f:47 [ 9.860351] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 9.860371] 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: 1051ff-0ff [ 10.438477] xen: registering gsi 16 triggering 0 polarity 1 [ 10.438482] xen_allocate_pirq: returning irq 16 for gsi 16 [ 10.438485] xen: --> irq=16 [ 10.438490] Already setup the GSI :16 [ 10.438494] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.438536] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 10.858873] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 12.418693] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 12.447225] SELinux: initialized (dev sda1, type ext4), uses xattr [ 12.487902] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 12.487912] SELinux: initialized (dev dm-1, type ext4), uses xattr [ 13.723917] Adding 6094840k swap on /dev/mapper/vg_mossclam-lv_swap. Priority:-1 extents:1 across:6094840k [ 13.729937] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts [ 14.894816] NET: Registered protocol family 10 [ 14.895503] lo: Disabled Privacy Extensions [ 14.942090] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 16.223585] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.606824] RPC: Registered udp transport module. [ 16.606826] RPC: Registered tcp transport module. [ 16.606828] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 16.615145] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts [ 17.778867] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 17.778870] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 17.779232] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 20.268516] Slow work thread pool: Starting up [ 20.268636] Slow work thread pool: Ready [ 20.268725] FS-Cache: Loaded [ 20.432539] Bridge firewalling registered [ 20.665401] FS-Cache: Netfs 'nfs' registered for caching [ 20.684090] mount.nfs used greatest stack depth: 3416 bytes left [ 25.598168] SELinux: initialized (dev xenfs, type xenfs), uses genfs_contexts [ 25.697464] virbr0: starting userspace STP failed, starting kernel STP [ 25.826315] alloc irq_desc for 749 on node 0 [ 25.826319] alloc kstat_irqs on node 0 [ 25.826379] alloc irq_desc for 748 on node 0 [ 25.826381] alloc kstat_irqs on node 0 [ 25.828099] XENBUS: Unable to read cpu state [ 25.829961] XENBUS: Unable to read cpu state [ 26.177376] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 26.177551] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 26.200067] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 26.201867] lo: Disabled Privacy Extensions [ 26.202073] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 28.295012] eth0: no IPv6 routers present [ 31.295011] vmbr: no IPv6 routers present [ 100.081034] alloc irq_desc for 747 on node 0 [ 100.081038] alloc kstat_irqs on node 0 [ 100.447447] device vif1.0 entered promiscuous mode [ 100.450332] vmbr: port 1(vif1.0) entering learning state [ 100.467425] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 101.441823] tun: Universal TUN/TAP device driver, 1.6 [ 101.441827] tun: (C) 1999-2004 Max Krasnyansky [ 101.475529] device tap1.0 entered promiscuous mode [ 101.475725] vmbr: port 2(tap1.0) entering learning state [ 101.581852] alloc irq_desc for 746 on node 0 [ 101.581856] alloc kstat_irqs on node 0 [ 101.581876] alloc irq_desc for 745 on node 0 [ 101.581878] alloc kstat_irqs on node 0 [ 102.018468] pciback: vpci: 0000:00:02.0: assign to virtual slot 0 [ 102.020098] pciback: vpci: 0000:00:02.1: assign to virtual slot 0 func 1 [ 111.437258] vif1.0: no IPv6 routers present [ 111.736008] tap1.0: no IPv6 routers present [ 115.450019] vmbr: port 1(vif1.0) entering forwarding state [ 116.365018] vmbr: port 2(tap1.0) entering forwarding state