| |
|
 |
|
 |
|
|
|
| |
|
|
xen-devel
Re: [Xen-devel] Radeon HD5770 and VGA passthrough (vBAR=pBAR not enough?
On 12.07.2010 12:24, FeepingCreature wrote:
> Hi,
>
> I've been trying these last few days to get primary VGA passthrough to
> work on my ATI Radeon HD5770 card.
>
> I'm running hg head with the secondary patches applied (external
> graphics BIOS, vbar=pbar), and in VGA mode this works fine.
>
> The problem is that ati2dvag crashes whenever it tries to switch to any
> driver-run graphics mode.
>
> ------ win xp starts its vga-based boot screen. All is well.
> (XEN) domctl.c:1002:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000
> (XEN) domctl.c:1002:d0 memory_map:remove: gfn=d0020 mfn=d0020 nr_mfns=20
> (XEN) domctl.c:1072:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=100
> (XEN) domctl.c:992:d0 memory_map:add: gfn=c0000 mfn=c0000 nr_mfns=10000
> (XEN) domctl.c:992:d0 memory_map:add: gfn=d0020 mfn=d0020 nr_mfns=20
> (XEN) domctl.c:1048:d0 ioport_map:add f_gport=d000 f_mport=d000 np=100
> (XEN) domctl.c:1002:d0 memory_map:remove: gfn=f1000 mfn=d0040 nr_mfns=4
> (XEN) domctl.c:992:d0 memory_map:add: gfn=f1000 mfn=d0040 nr_mfns=4
> (XEN) grant_table.c:1121:d8 Expanding dom (8) grant table from (4) to
> (32) frames.
> (XEN) irq.c:309: Dom8 callback via changed to GSI 28
> ------ driver activation happens here
> (XEN) domctl.c:1002:d0 memory_map:remove: gfn=c0000 mfn=c0000 nr_mfns=10000
> (XEN) domctl.c:1002:d0 memory_map:remove: gfn=d0020 mfn=d0020 nr_mfns=20
> (XEN) domctl.c:1072:d0 ioport_map:remove f_gport=d000 f_mport=d000 np=100
> -- note the different addresses!
> (XEN) domctl.c:992:d0 memory_map:add: gfn=e0000 mfn=c0000 nr_mfns=10000
> (XEN) domctl.c:992:d0 memory_map:add: gfn=fbfe0 mfn=d0020 nr_mfns=20
> (XEN) domctl.c:1048:d0 ioport_map:add f_gport=d000 f_mport=d000 np=100
> (XEN) domctl.c:1002:d0 memory_map:remove: gfn=f1000 mfn=d0040 nr_mfns=4
> (XEN) domctl.c:992:d0 memory_map:add: gfn=f1000 mfn=d0040 nr_mfns=4
>
> So the graphics card driver evidently tries to allocate its resources
> somewhere else than where they start out as. If I boot into VGA mode,
> the resources tab of the card confirms this.
>
> I have a sneaking suspicion that this breaks vBAR=pBAR, but I don't know
> how to verify or fix it. I believe that the correct thing to do might be
> to reallocate the graphics card's resources at the new address windows
> gives me, but I have no idea how to go about that. Any help would be
> appreciated.
>
Okay, that wasn't it - I updated the DSDT to use the C0000-CFFFF range
instead of E0000-EFFFF, which allowed the graphics driver to keep using
the original areas - color depth went up from 4-bit to 8-bit, but aside
from that ati2dvag still dies on resolution change. I've given up at
this point; will try again in a few months.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home