(XEN) Xen version 3.4 (Debian 3.4.2-2syscomp4) (f_wagner@xxxxxxxxxx) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) Wed Mar 24 10:37:58 CET 2010 (XEN) Console output is synchronous. (XEN) Command line: dummy=dummy sync_console com1=38400,8n1 console=com1,vga (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000faff0000 (usable) (XEN) 00000000faff0000 - 00000000fafff000 (ACPI data) (XEN) 00000000fafff000 - 00000000fb000000 (ACPI NVS) (XEN) 00000000ff780000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000400000000 (usable) (XEN) System RAM: 16303MB (16694844kB) (XEN) ACPI: RSDP 000F6F20, 0024 (r2 ACPIAM) (XEN) ACPI: XSDT FAFF0100, 0054 (r1 A M I OEMXSDT 7000626 MSFT 97) (XEN) ACPI: FACP FAFF0281, 00F4 (r1 A M I OEMFACP 7000626 MSFT 97) (XEN) ACPI: DSDT FAFF0410, 3751 (r1 0AAAA 0AAAA000 0 INTL 2002026) (XEN) ACPI: FACS FAFFF000, 0040 (XEN) ACPI: APIC FAFF0380, 0084 (r1 A M I OEMAPIC 7000626 MSFT 97) (XEN) ACPI: OEMB FAFFF040, 0041 (r1 A M I OEMBIOS 7000626 MSFT 97) (XEN) ACPI: SRAT FAFF3B70, 0110 (r1 A M I OEMSRAT 7000626 MSFT 97) (XEN) ACPI: HPET FAFF3C80, 0038 (r1 A M I OEMHPET 7000626 MSFT 97) (XEN) ACPI: ASF! FAFF3CC0, 0086 (r1 AMIASF AMDSTRET 1 INTL 2002026) (XEN) Domain heap initialised (XEN) Processor #0 15:1 APIC version 16 (XEN) Processor #1 15:1 APIC version 16 (XEN) Processor #2 15:1 APIC version 16 (XEN) Processor #3 15:1 APIC version 16 (XEN) IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 (XEN) IOAPIC[1]: apic_id 5, version 17, address 0xfebff000, GSI 24-27 (XEN) IOAPIC[2]: apic_id 6, version 17, address 0xfebfe000, GSI 28-31 (XEN) Enabling APIC mode: Flat. Using 3 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2192.715 MHz processor. (XEN) CPU0: AMD K8 machine check reporting enabled. (XEN) CPU0: AMD Dual Core AMD Opteron(tm) Processor 275 stepping 02 (XEN) Booting processor 1/1 eip 8c000 (XEN) AMD: Disabling C1 Clock Ramping Node #0 (XEN) AMD: Disabling C1 Clock Ramping Node #1 (XEN) CPU1: AMD K8 machine check reporting enabled. (XEN) CPU1: AMD Dual Core AMD Opteron(tm) Processor 275 stepping 02 (XEN) Booting processor 2/2 eip 8c000 (XEN) CPU2: AMD K8 machine check reporting enabled. (XEN) CPU2: AMD Dual Core AMD Opteron(tm) Processor 275 stepping 02 (XEN) Booting processor 3/3 eip 8c000 (XEN) CPU3: AMD K8 machine check reporting enabled. (XEN) CPU3: AMD Dual Core AMD Opteron(tm) Processor 275 stepping 02 (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) checking TSC synchronization across 4 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) Brought up 4 CPUs (XEN) I/O virtualisation disabled (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16b6000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 00000003e8000000->00000003f0000000 (4062317 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff816b6000 (XEN) Init. ramdisk: ffffffff816b6000->ffffffff82de7e00 (XEN) Phys-Mach map: ffffffff82de8000->ffffffff84d26368 (XEN) Start info: ffffffff84d27000->ffffffff84d274b4 (XEN) Page tables: ffffffff84d28000->ffffffff84d53000 (XEN) Boot stack: ffffffff84d53000->ffffffff84d54000 (XEN) TOTAL: ffffffff80000000->ffffffff85000000 (XEN) ENTRY ADDRESS: ffffffff814f9200 (XEN) Dom0 has maximum 4 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 136kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-12) (ben@xxxxxxxxxxxxxxx) (gcc version 4.3.4 (Debian 4.3.4-10) ) #1 SMP Mon May 3 12:36:28 UTC 2010 [ 0.000000] Command line: root=UUID=b4c39647-660c-4a72-89e6-fdd507524535 ro console=tty0 console=hvc0 earlyprintk=xen [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] xen_release_chunk: looking at area pfn fb000-ff780: 18304 pages freed [ 0.000000] released 18304 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] Xen: 000000000009fc00 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 00000000faff0000 (usable) [ 0.000000] Xen: 00000000faff0000 - 00000000fafff000 (ACPI data) [ 0.000000] Xen: 00000000fafff000 - 00000000fb000000 (ACPI NVS) [ 0.000000] Xen: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Xen: 0000000100000000 - 00000003e7c6d000 (usable) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] last_pfn = 0x3e7c6d max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xfaff0 max_arch_pfn = 0x400000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000faff0000 [ 0.000000] init_memory_mapping: 0000000100000000-00000003e7c6d000 [ 0.000000] RAMDISK: 016b6000 - 02de7e00 [ 0.000000] ACPI: RSDP 00000000000f6f20 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000faff0100 00054 (v01 A M I OEMXSDT 07000626 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000faff0281 000F4 (v01 A M I OEMFACP 07000626 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000faff0410 03751 (v01 0AAAA 0AAAA000 00000000 INTL 02002026) [ 0.000000] ACPI: FACS 00000000fafff000 00040 [ 0.000000] ACPI: APIC 00000000faff0380 00084 (v01 A M I OEMAPIC 07000626 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000fafff040 00041 (v01 A M I OEMBIOS 07000626 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000faff3b70 00110 (v01 A M I OEMSRAT 07000626 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000faff3c80 00038 (v01 A M I OEMHPET 07000626 MSFT 00000097) [ 0.000000] ACPI: ASF! 00000000faff3cc0 00086 (v01 AMIASF AMDSTRET 00000001 INTL 02002026) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 100000-fb000000 [ 0.000000] SRAT: Node 1 PXM 1 200000000-400000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-200000000 [ 0.000000] SRAT: Node 0 PXM 0 0-9fc00 [ 0.000000] SRAT: PXMs only cover 11819MB of your 15915MB e820 RAM. Not used. [ 0.000000] SRAT: SRAT not used. [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 2 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000200000000 [ 0.000000] Node 1 MemBase 0000000200000000 Limit 00000003e7c6d000 [ 0.000000] Using node hash shift of 33 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000200000000 [ 0.000000] NODE_DATA [0000000000010000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 0000000000057fff] pages 40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0200000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0004d28000 - 0004d53000] XEN PAGETABLES ==> [0004d28000 - 0004d53000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001695d14] TEXT DATA BSS ==> [0001000000 - 0001695d14] [ 0.000000] #4 [00016b6000 - 0002de7e00] RAMDISK ==> [00016b6000 - 0002de7e00] [ 0.000000] #5 [0002de8000 - 0004d28000] XEN START INFO ==> [0002de8000 - 0004d28000] [ 0.000000] #6 [0001696000 - 0001696200] BRK ==> [0001696000 - 0001696200] [ 0.000000] #7 [0000100000 - 00008af000] PGTABLE ==> [0000100000 - 00008af000] [ 0.000000] #8 [0004d53000 - 000649e000] PGTABLE ==> [0004d53000 - 000649e000] [ 0.000000] Bootmem setup node 1 0000000200000000-00000003e7c6d000 [ 0.000000] NODE_DATA [0000000200000000 - 0000000200007fff] [ 0.000000] bootmap [0000000200008000 - 0000000200044f8f] pages 3d [ 0.000000] (9 early reservations) ==> bootmem [0200000000 - 03e7c6d000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0004d28000 - 0004d53000] XEN PAGETABLES [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #3 [0001000000 - 0001695d14] TEXT DATA BSS [ 0.000000] #4 [00016b6000 - 0002de7e00] RAMDISK [ 0.000000] #5 [0002de8000 - 0004d28000] XEN START INFO [ 0.000000] #6 [0001696000 - 0001696200] BRK [ 0.000000] #7 [0000100000 - 00008af000] PGTABLE [ 0.000000] #8 [0004d53000 - 000649e000] PGTABLE [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x003e7c6d [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000faff0 [ 0.000000] 0: 0x00100000 -> 0x00200000 [ 0.000000] 1: 0x00200000 -> 0x003e7c6d [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfebff000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfebff000, GSI 24-24 [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfebfe000] gsi_base[28]) [ 0.000000] IOAPIC[2]: apic_id 6, version 0, address 0xfebfe000, GSI 28-28 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x102282a0 base: 0xfec01000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000faff0000 - 00000000fafff000 [ 0.000000] PM: Registered nosave memory: 00000000fafff000 - 00000000fb000000 [ 0.000000] PM: Registered nosave memory: 00000000fb000000 - 00000000ff780000 [ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at fb000000 (gap: fb000000:4780000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 3.4 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88000d507000 s90008 r8192 d20584 u118784 [ 0.000000] pcpu-alloc: s90008 r8192 d20584 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 2 [1] 1 [1] 3 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4016518 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=b4c39647-660c-4a72-89e6-fdd507524535 ro console=tty0 console=hvc0 earlyprintk=xen [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff88000d54a000 - ffff88001154a000 [ 0.000000] DMA: software IO TLB at phys 0xd54a000 - 0x1154a000 [ 0.000000] xen_swiotlb_fixup: buf=ffff88000d54a000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff8800115aa000 size=32768 [ 0.000000] Memory: 15912112k/16380340k available (3106k kernel code, 82436k absent, 385792k reserved, 1889k data, 588k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1280 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [hvc0] enabled, bootconsole disabled [ 0.000000] console [hvc0] enabled, bootconsole disabled [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] Detected 2192.648 MHz processor. [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4385.29 BogoMIPS (lpj=8770592) [ 0.004037] Security Framework initialized [ 0.008000] SELinux: Disabled at boot. [ 0.011824] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.022395] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.027990] Mount-cache hash table entries: 256 [ 0.028207] Initializing cgroup subsys ns [ 0.032001] Initializing cgroup subsys cpuacct [ 0.032001] Initializing cgroup subsys devices [ 0.032001] Initializing cgroup subsys freezer [ 0.032001] Initializing cgroup subsys net_cls [ 0.032027] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.036004] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.040001] CPU 0/0x0 -> Node 0 [ 0.040016] CPU: Physical Processor ID: 0 [ 0.044001] CPU: Processor Core ID: 0 [ 0.044006] Performance Events: AMD PMU driver. [ 0.048001] ------------[ cut here ]------------ [ 0.048001] WARNING: at /build/buildd-linux-2.6_2.6.32-12-amd64-tnQeYz/linux-2.6-2.6.32/debian/build/source_amd64_xen/arch/x86/xen/enlighten.c:721 init_hw_perf_events+0x32d/0x3cd() [ 0.048001] Hardware name: To Be Filled By O.E.M. [ 0.048001] Modules linked in: [ 0.048001] Pid: 0, comm: swapper Not tainted 2.6.32-5-xen-amd64 #1 [ 0.048001] Call Trace: [ 0.048001] [] ? init_hw_perf_events+0x32d/0x3cd [ 0.048001] [] ? init_hw_perf_events+0x32d/0x3cd [ 0.048001] [] ? warn_slowpath_common+0x77/0xa3 [ 0.048001] [] ? init_hw_perf_events+0x32d/0x3cd [ 0.048001] [] ? identify_cpu+0x2ff/0x308 [ 0.048001] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 0.048001] [] ? kmem_cache_alloc+0x8c/0xf0 [ 0.048001] [] ? identify_boot_cpu+0x15/0x3e [ 0.048001] [] ? check_bugs+0x9/0x2e [ 0.048001] [] ? start_kernel+0x3cd/0x3e8 [ 0.048001] [] ? xen_start_kernel+0x649/0x64f [ 0.048001] ---[ end trace a7919e7f17c0a725 ]--- [ 0.048001] ... version: 0 [ 0.048001] ... bit width: 48 [ 0.048001] ... generic registers: 4 [ 0.048001] ... value mask: 0000ffffffffffff [ 0.048001] ... max period: 00007fffffffffff [ 0.048001] ... fixed-purpose events: 0 [ 0.048001] ... event mask: 000000000000000f [ 0.048001] SMP alternatives: switching to UP code [ 0.048001] ACPI: Core revision 20090903 [ 0.054006] installing Xen timer for CPU 1 [ 0.056055] SMP alternatives: switching to SMP code [ 0.000020] Initializing CPU#1 [ 0.000092] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000095] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.000098] CPU 1/0x0 -> Node 0 [ 0.000101] CPU: Physical Processor ID: 0 [ 0.000102] CPU: Processor Core ID: 1 [ 0.060292] installing Xen timer for CPU 2 [ 0.000010] Initializing CPU#2 [ 0.000074] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000077] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.000080] CPU 2/0x0 -> Node 0 [ 0.000082] CPU: Physical Processor ID: 1 [ 0.000084] CPU: Processor Core ID: 0 [ 0.064274] installing Xen timer for CPU 3 [ 0.000026] Initializing CPU#3 [ 0.000100] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000103] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.000105] CPU 3/0x0 -> Node 0 [ 0.000108] CPU: Physical Processor ID: 1 [ 0.000109] CPU: Processor Core ID: 1 [ 0.068215] Brought up 4 CPUs [ 0.072061] devtmpfs: initialized [ 0.080305] Grant table initialized [ 0.084001] regulator: core version 0.5 [ 0.084052] NET: Registered protocol family 16 [ 0.088117] TOM: 00000000fb000000 aka 4016M [ 0.092021] TOM2: 0000000400000000 aka 16384M [ 0.096001] ACPI: bus type pci registered [ 0.096087] PCI: Using configuration type 1 for base access [ 0.101049] bio: create slab at 0 [ 0.104797] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.111071] ACPI: Executed 1 blocks of module-level executable AML code [ 0.121928] ACPI: Interpreter enabled [ 0.124001] ACPI: (supports S0 S1 S4 S5) [ 0.124001] ACPI: Using IOAPIC for interrupt routing [ 0.133229] ACPI: No dock devices found. [ 0.136117] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.141902] pci 0000:02:09.0: PME# supported from D3hot D3cold [ 0.144001] pci 0000:02:09.0: PME# disabled [ 0.144001] pci 0000:02:09.1: PME# supported from D3hot D3cold [ 0.144001] pci 0000:02:09.1: PME# disabled [ 0.148325] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.152087] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.156090] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.160088] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.164042] Failed to sync pcpu 0 [ 0.168025] xen_balloon: Initialising balloon driver with page order 0. [ 0.172103] vgaarb: device added: PCI:0000:04:06.0,decodes=io+mem,owns=io+mem,locks=none [ 0.176001] vgaarb: loaded [ 0.176054] PCI: Using ACPI for IRQ routing [ 0.180096] Switching to clocksource xen [ 0.185639] pnp: PnP ACPI init [ 0.188111] ACPI: bus type pnp registered [ 0.207562] xen_allocate_pirq: returning irq 1 for gsi 1 [ 0.223637] Failed to setup GSI :1, err_code:-38 [ 0.237771] xen_allocate_pirq: returning irq 12 for gsi 12 [ 0.254372] Failed to setup GSI :12, err_code:-38 [ 0.268726] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.285296] Failed to setup GSI :13, err_code:-38 [ 0.300177] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.316229] Failed to setup GSI :4, err_code:-38 [ 0.330877] xen_allocate_pirq: returning irq 3 for gsi 3 [ 0.346927] Failed to setup GSI :3, err_code:-38 [ 0.361659] xen_allocate_pirq: returning irq 6 for gsi 6 [ 0.377708] Failed to setup GSI :6, err_code:-38 [ 0.392533] xen_allocate_pirq: returning irq 7 for gsi 7 [ 0.408586] Failed to setup GSI :7, err_code:-38 [ 0.423727] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.439783] Failed to setup GSI :8, err_code:-38 [ 0.454594] pnp: PnP ACPI: found 16 devices [ 0.457833] ACPI: ACPI bus type pnp unregistered [ 0.481311] system 00:0b: ioport range 0x680-0x6ff has been reserved [ 0.485294] system 00:0b: ioport range 0x295-0x296 has been reserved [ 0.485294] system 00:0b: ioport range 0x778-0x77f has been reserved [ 0.485294] system 00:0b: ioport range 0xb78-0xb7f has been reserved [ 0.485294] system 00:0b: ioport range 0xf78-0xf7f has been reserved [ 0.577502] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved [ 0.581489] system 00:0c: ioport range 0x1000-0x10bf has been reserved [ 0.581489] system 00:0c: ioport range 0x10e0-0x10ff has been reserved [ 0.581489] system 00:0c: ioport range 0x10c0-0x10df has been reserved [ 0.581489] system 00:0c: ioport range 0xde00-0xde7f has been reserved [ 0.581489] system 00:0c: ioport range 0xde80-0xdeff has been reserved [ 0.695519] system 00:0e: ioport range 0xca0-0xcaf has been reserved [ 0.699510] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.699510] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.699510] system 00:0e: iomem range 0xfff80000-0xffffffff has been reserved [ 0.699510] system 00:0e: iomem range 0xff780000-0xff7fffff has been reserved [ 0.802134] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 0.806125] system 00:0f: iomem range 0xc0000-0xdffff could not be reserved [ 0.806125] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 0.806125] system 00:0f: iomem range 0x100000-0xfaffffff could not be reserved [ 0.892722] pci 0000:00:06.0: PCI bridge, secondary bus 0000:04 [ 0.896004] pci 0000:00:06.0: IO window: 0xb000-0xbfff [ 0.896004] pci 0000:00:06.0: MEM window: 0xfca00000-0xfeafffff [ 0.896004] pci 0000:00:06.0: PREFETCH window: 0xfc600000-0xfc6fffff [ 0.896004] pci 0000:02:02.0: PCI bridge, secondary bus 0000:03 [ 0.896004] pci 0000:02:02.0: IO window: disabled [ 0.896004] pci 0000:02:02.0: MEM window: 0xfc800000-0xfc8fffff [ 0.896004] pci 0000:02:02.0: PREFETCH window: 0x000000fbd00000-0x000000fc4fffff [ 0.896004] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.896004] pci 0000:00:0a.0: IO window: disabled [ 0.896004] pci 0000:00:0a.0: MEM window: 0xfc800000-0xfc9fffff [ 0.896004] pci 0000:00:0a.0: PREFETCH window: 0x000000fbd00000-0x000000fc5fffff [ 0.896004] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01 [ 0.896004] pci 0000:00:0b.0: IO window: disabled [ 0.896004] pci 0000:00:0b.0: MEM window: disabled [ 0.896004] pci 0000:00:0b.0: PREFETCH window: disabled [ 0.896004] NET: Registered protocol family 2 [ 1.191744] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 1.219022] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.246317] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.250179] TCP: Hash tables configured (established 524288 bind 65536) [ 1.250179] TCP reno registered [ 1.296905] NET: Registered protocol family 1 [ 1.300655] pci 0000:00:07.3: boot interrupts on device [1022:746b] already disabled [ 1.300655] pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled [ 1.300655] pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled [ 1.375351] Unpacking initramfs... [ 1.423343] Freeing initrd memory: 23751k freed [ 1.458247] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.460015] DMA: Placing 64MB software IO TLB between ffff88000d54a000 - ffff88001154a000 [ 1.460015] DMA: software IO TLB at phys 0xd54a000 - 0x1154a000 [ 1.521239] audit: initializing netlink socket (disabled) [ 1.537760] type=2000 audit(1273149592.345:1): initialized [ 1.556284] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.577642] VFS: Disk quotas dquot_6.5.2 [ 1.589582] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.609135] msgmni has been set to 31124 [ 1.621450] alg: No test for stdrng (krng) [ 1.633943] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.637873] io scheduler noop registered [ 1.637873] io scheduler anticipatory registered [ 1.637873] io scheduler deadline registered [ 1.695290] io scheduler cfq registered (default) [ 1.714682] registering netback [ 1.726327] hpet_acpi_add: no address or irqs in _CRS [ 1.741641] Linux agpgart interface v0.103 [ 1.745606] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.773271] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.791875] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.808918] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.832427] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.857523] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.872508] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.896458] mice: PS/2 mouse device common for all mice [ 1.912297] rtc_cmos 00:02: RTC can wake from S4 [ 1.926326] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.944801] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 1.962185] cpuidle: using governor ladder [ 1.966156] cpuidle: using governor menu [ 1.986600] No iBFT detected. [ 1.990575] TCP cubic registered [ 2.005978] NET: Registered protocol family 10 [ 2.020096] lo: Disabled Privacy Extensions [ 2.033051] Mobile IPv6 [ 2.036971] NET: Registered protocol family 17 [ 2.054197] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 2.054273] registered taskstats version 1 [ 2.092654] rtc_cmos 00:02: setting system clock to 2010-05-06 12:39:53 UTC (1273149593) [ 2.117252] Initalizing network drop monitor service [ 2.132378] Freeing unused kernel memory: 588k freed [ 2.136275] Write protecting the kernel read-only data: 4272k Loading, please wait... Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... [ 2.602231] SCSI subsystem initialized [ 2.676636] Floppy drive(s): fd0 is 1.44M [ 2.697611] usbcore: registered new interface driver usbfs [ 2.700514] usbcore: registered new interface driver hub [ 2.766723] usbcore: registered new device driver usb [ 2.768087] Failed to setup GSI :16, err_code:-38 [ 2.768091] sym53c8xx 0000:04:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.861908] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.950472] sym0: <1010-66> rev 0x1 at pci 0000:04:04.0 irq 16 [ 2.968176] tg3.c:v3.102 (September 1, 2009) [ 2.981135] Failed to setup GSI :24, err_code:-38 [ 2.985125] tg3 0000:02:09.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 3.015975] xen_allocate_pirq: returning irq 24 for gsi 24 [ 3.032572] Failed to setup GSI :24, err_code:-38 [ 3.036561] arcmsr 0000:03:0e.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 3.067992] scsi0 : pata_amd [ 3.068594] FDC 0 is a post-1991 82077 [ 3.090696] scsi2 : pata_amd [ 3.101895] sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking [ 3.116510] sym0: open drain IRQ line driver, using on-chip SRAM [ 3.121095] sym0: using LOAD/STORE-based firmware. [ 3.121095] sym0: handling phase mismatch from SCRIPTS. [ 3.169850] ARECA RAID ADAPTER1: FIRMWARE VERSION V1.48 2009-12-31 [ 3.189644] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 3.210662] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 3.231828] scsi1 : Areca SATA Host Adapter RAID Controller( RAID6 capable) [ 3.231830] Driver Version 1.20.00.15 2008/02/27 [ 3.270820] eth0: Tigon3 [partno(BCM95704A7) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:e0:81:4c:ee:56 [ 3.299594] eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 3.322610] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.341863] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] [ 3.357918] Failed to setup GSI :25, err_code:-38 [ 3.361728] tg3 0000:02:09.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25 [ 3.396484] sym0: SCSI BUS has been reset. [ 3.412198] scsi3 : sym-2.2.3 [ 3.421775] Failed to setup GSI :19, err_code:-38 [ 3.436000] ohci_hcd 0000:04:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 3.457633] ohci_hcd 0000:04:00.0: OHCI Host Controller [ 3.473769] ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1 [ 3.477445] ohci_hcd 0000:04:00.0: irq 19, io mem 0xfeafa000 [ 3.523598] eth1: Tigon3 [partno(BCM95704A7) rev 2100] (PCIX:100MHz:64-bit) MAC address 00:e0:81:4c:ee:57 [ 3.524004] eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 3.561017] ata2.00: ATAPI: DV-28E-R, 1.8A, max UDMA/33 [ 3.576918] ata2.00: configured for UDMA/33 [ 3.524004] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.623169] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] [ 3.639195] scsi: waiting for bus probes to complete ... [ 3.641186] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.641189] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.641192] usb usb1: Product: OHCI Host Controller [ 3.641194] usb usb1: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd [ 3.641196] usb usb1: SerialNumber: 0000:04:00.0 [ 3.641299] usb usb1: configuration #1 chosen from 1 choice [ 3.641335] hub 1-0:1.0: USB hub found [ 3.643119] hub 1-0:1.0: 3 ports detected [ 3.745983] xen_allocate_pirq: returning irq 19 for gsi 19 [ 3.745990] Failed to setup GSI :19, err_code:-38 [ 3.745995] ohci_hcd 0000:04:00.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 3.746040] ohci_hcd 0000:04:00.1: OHCI Host Controller [ 3.746063] ohci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 2 [ 3.754265] ohci_hcd 0000:04:00.1: irq 19, io mem 0xfeafb000 [ 3.898125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.900016] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.900016] usb usb2: Product: OHCI Host Controller [ 3.900016] usb usb2: Manufacturer: Linux 2.6.32-5-xen-amd64 ohci_hcd [ 3.900016] usb usb2: SerialNumber: 0000:04:00.1 [ 3.989478] usb usb2: configuration #1 chosen from 1 choice [ 4.006883] hub 2-0:1.0: USB hub found [ 4.018305] hub 2-0:1.0: 3 ports detected [ 24.760029] arcmsr1: abort device command of scsi id = 0 lun = 0 [ 27.772031] arcmsr1: scsi id = 0 lun = 0 ccb = '0xffff880002840000' poll command abort successfully [ 27.800025] scsi 3:0:0:0: ABORT operation started [ 32.812026] scsi 3:0:0:0: ABORT operation timed-out. [ 32.816008] scsi 3:0:0:0: DEVICE RESET operation started [ 37.796023] arcmsr1: abort device command of scsi id = 0 lun = 0 [ 37.840023] scsi 3:0:0:0: DEVICE RESET operation timed-out. [ 37.844012] scsi 3:0:0:0: BUS RESET operation started [ 40.800026] arcmsr1: scsi id = 0 lun = 0 ccb = '0xffff880002840240' poll command abort successfully [ 42.872020] scsi 3:0:0:0: BUS RESET operation timed-out. [ 42.876004] scsi 3:0:0:0: HOST RESET operation started [ 42.876004] sym0: SCSI BUS has been reset. [ 47.920014] scsi 3:0:0:0: HOST RESET operation timed-out. [ 47.924004] scsi 3:0:0:0: Device offlined - not ready after error recovery [ 60.804023] arcmsr1: abort device command of scsi id = 0 lun = 0 [ 63.808026] arcmsr1: scsi id = 0 lun = 0 ccb = '0xffff880002840480' poll command abort successfully [ 63.828016] scsi 1:0:0:0: Device offlined - not ready after error recovery [ 68.796018] scsi 3:0:1:0: ABORT operation started [ 73.808020] scsi 3:0:1:0: ABORT operation timed-out. [ 73.812004] scsi 3:0:1:0: DEVICE RESET operation started [ 78.836020] scsi 3:0:1:0: DEVICE RESET operation timed-out. [ 78.840005] scsi 3:0:1:0: BUS RESET operation started [ 83.868015] scsi 3:0:1:0: BUS RESET operation timed-out. [ 83.872006] scsi 3:0:1:0: HOST RESET operation started [ 83.872006] sym0: SCSI BUS has been reset. [ 84.760028] arcmsr1: abort device command of scsi id = 1 lun = 0 [ 87.780019] arcmsr1: scsi id = 1 lun = 0 ccb = '0xffff8800028406c0' poll command abort successfully [ 88.916021] scsi 3:0:1:0: HOST RESET operation timed-out. [ 88.920005] scsi 3:0:1:0: Device offlined - not ready after error recovery [ 97.804021] arcmsr1: abort device command of scsi id = 1 lun = 0 [ 100.808024] arcmsr1: scsi id = 1 lun = 0 ccb = '0xffff880002840900' poll command abort successfully [ 109.796018] scsi 3:0:2:0: ABORT operation started [ 114.808021] scsi 3:0:2:0: ABORT operation timed-out. [ 114.812005] scsi 3:0:2:0: DEVICE RESET operation started [ 119.836024] scsi 3:0:2:0: DEVICE RESET operation timed-out. [ 119.840006] scsi 3:0:2:0: BUS RESET operation started [ 120.812024] arcmsr1: abort device command of scsi id = 1 lun = 0 [ 123.816025] arcmsr1: scsi id = 1 lun = 0 ccb = '0xffff880002840b40' poll command abort successfully [ 123.820005] scsi 1:0:1:0: Device offlined - not ready after error recovery [ 124.868020] scsi 3:0:2:0: BUS RESET operation timed-out. [ 124.872004] scsi 3:0:2:0: HOST RESET operation started [ 124.872004] sym0: SCSI BUS has been reset. [ 129.916020] scsi 3:0:2:0: HOST RESET operation timed-out. [ 129.920004] scsi 3:0:2:0: Device offlined - not ready after error recovery [ 144.760028] arcmsr1: abort device command of scsi id = 2 lun = 0 [ 147.780017] arcmsr1: scsi id = 2 lun = 0 ccb = '0xffff880002840d80' poll command abort successfully [ 150.796018] scsi 3:0:3:0: ABORT operation started [ 155.808012] scsi 3:0:3:0: ABORT operation timed-out. [ 155.812003] scsi 3:0:3:0: DEVICE RESET operation started [ 157.804017] arcmsr1: abort device command of scsi id = 2 lun = 0 [ 160.808020] arcmsr1: scsi id = 2 lun = 0 ccb = '0xffff880002840fc0' poll command abort successfully [ 160.836011] scsi 3:0:3:0: DEVICE RESET operation timed-out. [ 160.840004] scsi 3:0:3:0: BUS RESET operation started [ 165.868020] scsi 3:0:3:0: BUS RESET operation timed-out. [ 165.872004] scsi 3:0:3:0: HOST RESET operation started [ 165.872004] sym0: SCSI BUS has been reset. [ 170.916015] scsi 3:0:3:0: HOST RESET operation timed-out. [ 170.920005] scsi 3:0:3:0: Device offlined - not ready after error recovery [ 180.812020] arcmsr1: abort device command of scsi id = 2 lun = 0 [ 183.816024] arcmsr1: scsi id = 2 lun = 0 ccb = '0xffff880002841200' poll command abort successfully [ 183.820003] scsi 1:0:2:0: Device offlined - not ready after error recovery [ 191.796040] scsi 3:0:4:0: ABORT operation started [ 196.808019] scsi 3:0:4:0: ABORT operation timed-out. [ 196.812005] scsi 3:0:4:0: DEVICE RESET operation started [ 201.836019] scsi 3:0:4:0: DEVICE RESET operation timed-out. [ 201.840005] scsi 3:0:4:0: BUS RESET operation started [ 204.760025] arcmsr1: abort device command of scsi id = 3 lun = 0 [ 206.868019] scsi 3:0:4:0: BUS RESET operation timed-out. [ 206.872005] scsi 3:0:4:0: HOST RESET operation started [ 206.872005] sym0: SCSI BUS has been reset. [ 207.780016] arcmsr1: scsi id = 3 lun = 0 ccb = '0xffff880002841440' poll command abort successfully [ 211.916014] scsi 3:0:4:0: HOST RESET operation timed-out. [ 211.920003] scsi 3:0:4:0: Device offlined - not ready after error recovery [ 217.804014] arcmsr1: abort device command of scsi id = 3 lun = 0 [ 220.808017] arcmsr1: scsi id = 3 lun = 0 ccb = '0xffff880002841680' poll command abort successfully [ 232.796014] scsi 3:0:5:0: ABORT operation started [ 237.808018] scsi 3:0:5:0: ABORT operation timed-out. [ 237.812005] scsi 3:0:5:0: DEVICE RESET operation started [ 240.812017] arcmsr1: abort device command of scsi id = 3 lun = 0 [ 241.552024] INFO: task modprobe:251 blocked for more than 120 seconds. [ 241.556003] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 241.556003] modprobe D 0000000000000000 0 251 1 0x00000000 [ 241.556003] ffff8801fce98000 0000000000000282 ffffffff8100eb4f ffffffff810e85f5 [ 241.556003] 000080d0fd376050 ffffffff81140ea4 000000000000f8a0 ffff8801fd363fd8 [ 241.556003] 0000000000015640 0000000000015640 ffff8801fd160e20 ffff8801fd161118 [ 241.683205] Call Trace: [ 241.687196] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 241.687196] [] ? kmem_cache_alloc+0x8c/0xf0 [ 241.687196] [] ? sysfs_find_dirent+0x1b/0x2f [ 241.687196] [] ? check_events+0x12/0x20 [ 241.687196] [] ? async_synchronize_cookie_domain+0xac/0x106 [ 241.687196] [] ? autoremove_wake_function+0x0/0x2e [ 241.687196] [] ? __blocking_notifier_call_chain+0x51/0x5f [ 241.687196] [] ? async_synchronize_full+0x10/0x2c [ 241.687196] [] ? sys_init_module+0x18c/0x21a [ 241.687196] [] ? system_call_fastpath+0x16/0x1b [ 241.687196] INFO: task modprobe:282 blocked for more than 120 seconds. [ 241.687196] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 241.687196] modprobe D ffff880206b69640 0 282 1 0x00000000 [ 241.687196] ffff8801fd398e20 0000000000000286 ffff8801fd376410 ffff8801fcc47e48 [ 241.687196] 0000000000000000 ffffffff81493570 000000000000f8a0 ffff8801fcc47fd8 [ 241.687196] 0000000000015640 0000000000015640 ffff8801fdb59c40 ffff8801fdb59f38 [ 241.687196] Call Trace: [ 241.687196] [] ? check_events+0x12/0x20 [ 241.687196] [] ? async_synchronize_cookie_domain+0xac/0x106 [ 241.687196] [] ? autoremove_wake_function+0x0/0x2e [ 241.687196] [] ? __blocking_notifier_call_chain+0x51/0x5f [ 241.687196] [] ? async_synchronize_full+0x10/0x2c [ 241.687196] [] ? sys_init_module+0x18c/0x21a [ 241.687196] [] ? system_call_fastpath+0x16/0x1b [ 241.687196] INFO: task modprobe:284 blocked for more than 120 seconds. [ 241.687196] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 241.687196] modprobe D 0000000000000000 0 284 1 0x00000000 [ 241.687196] ffff8801ff059530 0000000000000282 0000000000000000 ffffffff81140ea4 [ 241.687196] 0000000000000001 ffffffff811413be 000000000000f8a0 ffff8801fd159fd8 [ 241.687196] 0000000000015640 0000000000015640 ffff8801fd398e20 ffff8801fd399118 [ 241.687196] Call Trace: [ 241.687196] [] ? sysfs_find_dirent+0x1b/0x2f [ 241.687196] [] ? sysfs_addrm_finish+0x1d/0x20a [ 241.687196] [] ? check_events+0x12/0x20 [ 241.687196] [] ? async_synchronize_cookie_domain+0xac/0x106 [ 241.687196] [] ? autoremove_wake_function+0x0/0x2e [ 241.687196] [] ? __blocking_notifier_call_chain+0x51/0x5f [ 241.687196] [] ? async_synchronize_full+0x10/0x2c [ 241.687196] [] ? sys_init_module+0x18c/0x21a [ 241.687196] [] ? system_call_fastpath+0x16/0x1b [ 241.687196] INFO: task modprobe:355 blocked for more than 120 seconds. [ 241.687196] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 241.687196] modprobe D 0000000000000000 0 355 1 0x00000000 [ 241.687196] ffff8801fd39cdb0 0000000000000286 ffffffff8100eb4f ffffffff810e85f5 [ 241.687196] 000080d0fd376690 ffffffff81140ea4 000000000000f8a0 ffff8801fce81fd8 [ 241.687196] 0000000000015640 0000000000015640 ffff8801fce046a0 ffff8801fce04998 [ 241.687196] Call Trace: [ 241.687196] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 241.687196] [] ? kmem_cache_alloc+0x8c/0xf0 [ 241.687196] [] ? sysfs_find_dirent+0x1b/0x2f [ 241.687196] [] ? check_events+0x12/0x20 [ 241.687196] [] ? async_synchronize_cookie_domain+0xac/0x106 [ 241.687196] [] ? autoremove_wake_function+0x0/0x2e [ 241.687196] [] ? __blocking_notifier_call_chain+0x51/0x5f [ 241.687196] [] ? async_synchronize_full+0x10/0x2c [ 241.687196] [] ? sys_init_module+0x18c/0x21a [ 241.687196] [] ? system_call_fastpath+0x16/0x1b [ 241.687196] INFO: task modprobe:414 blocked for more than 120 seconds. [ 241.687196] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 241.687196] modprobe D 0000000000000000 0 414 1 0x00000000 [ 241.687196] ffff8801fce98000 0000000000000286 ffffffff8100eb4f ffffffff810e85f5 [ 241.687196] 000080d0fd190960 ffffffff81140ea4 000000000000f8a0 ffff8801fd0d5fd8 [ 241.687196] 0000000000015640 0000000000015640 ffff8801fd309530 ffff8801fd309828 [ 241.687196] Call Trace: [ 241.687196] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 241.687196] [] ? kmem_cache_alloc+0x8c/0xf0 [ 241.687196] [] ? sysfs_find_dirent+0x1b/0x2f [ 241.687196] [] ? check_events+0x12/0x20 [ 241.687196] [] ? async_synchronize_cookie_domain+0xac/0x106 [ 241.687196] [] ? autoremove_wake_function+0x0/0x2e [ 241.687196] [] ? __blocking_notifier_call_chain+0x51/0x5f [ 241.687196] [] ? async_synchronize_full+0x10/0x2c [ 241.687196] [] ? sys_init_module+0x18c/0x21a [ 241.687196] [] ? system_call_fastpath+0x16/0x1b [ 241.687196] INFO: task async/1:584 blocked for more than 120 seconds. [ 241.687196] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 241.687196] async/1 D 0000000000000000 0 584 2 0x00000000 [ 241.687196] ffff8801ff058e20 0000000000000246 0000000000000000 0000000000000002 [ 241.687196] 0000000000000040 ffff880206b69640 000000000000f8a0 ffff8801fd349fd8 [ 241.687196] 0000000000015640 0000000000015640 ffff8801fce98000 ffff8801fce982f8 [ 241.687196] Call Trace: [ 241.687196] [] ? thread_return+0x79/0xe0 [ 241.687196] [] ? schedule_timeout+0x2e/0xdd [ 241.687196] [] ? wait_for_common+0xde/0x15b [ 241.687196] [] ? default_wake_function+0x0/0x9 [ 241.687196] [] ? kmem_cache_alloc+0x8c/0xf0 [ 241.687196] [] ? scsi_complete_async_scans+0xf2/0x155 [scsi_mod] [ 241.687196] [] ? __scsi_add_device+0x80/0xd1 [scsi_mod] [ 241.687196] [] ? ata_scsi_scan_host+0x6f/0x170 [libata] [ 241.687196] [] ? async_thread+0x0/0x20d [ 241.687196] [] ? async_thread+0xff/0x20d [ 241.687196] [] ? default_wake_function+0x0/0x9 [ 241.687196] [] ? async_thread+0x0/0x20d [ 241.687196] [] ? kthread+0x79/0x81 [ 241.687196] [] ? child_rip+0xa/0x20 [ 241.687196] [] ? int_ret_from_sys_call+0x7/0x1b [ 241.687196] [] ? retint_restore_args+0x5/0x6 [ 241.687196] [] ? child_rip+0x0/0x20 [ 243.567555] scsi 3:0:5:0: DEVICE RESET operation timed-out. [ 243.571541] scsi 3:0:5:0: BUS RESET operation started [ 243.816018] arcmsr1: scsi id = 3 lun = 0 ccb = '0xffff8800028418c0' poll command abort successfully [ 243.820005] scsi 1:0:3:0: Device offlined - not ready after error recovery [ 248.600024] scsi 3:0:5:0: BUS RESET operation timed-out. [ 248.604006] scsi 3:0:5:0: HOST RESET operation started [ 248.604006] sym0: SCSI BUS has been reset. [ 253.648024] scsi 3:0:5:0: HOST RESET operation timed-out. [ 253.652014] scsi 3:0:5:0: Device offlined - not ready after error recovery [ 264.760023] arcmsr1: abort device command of scsi id = 4 lun = 0 [ 267.780016] arcmsr1: scsi id = 4 lun = 0 ccb = '0xffff880002841b00' poll command abort successfully [ 274.796015] scsi 3:0:6:0: ABORT operation started [ 277.804014] arcmsr1: abort device command of scsi id = 4 lun = 0 [ 279.808013] scsi 3:0:6:0: ABORT operation timed-out. [ 279.812004] scsi 3:0:6:0: DEVICE RESET operation started [ 280.808020] arcmsr1: scsi id = 4 lun = 0 ccb = '0xffff880002841d40' poll command abort successfully [ 284.836018] scsi 3:0:6:0: DEVICE RESET operation timed-out. [ 284.840004] scsi 3:0:6:0: BUS RESET operation started [ 289.868013] scsi 3:0:6:0: BUS RESET operation timed-out. [ 289.872003] scsi 3:0:6:0: HOST RESET operation started [ 289.872003] sym0: SCSI BUS has been reset. [ 294.916019] scsi 3:0:6:0: HOST RESET operation timed-out. [ 294.920005] scsi 3:0:6:0: Device offlined - not ready after error recovery [ 300.812018] arcmsr1: abort device command of scsi id = 4 lun = 0 [ 303.816019] arcmsr1: scsi id = 4 lun = 0 ccb = '0xffff880002841f80' poll command abort successfully [ 303.820004] scsi 1:0:4:0: Device offlined - not ready after error recovery [ 315.796015] scsi 3:0:8:0: ABORT operation started