Alex,
Thanks for your tip. Do you think just applying the patch to fix the
install path to the Makefile will fix it or will I need the other 6
patches as well (which seem quite extensive)? I am just wondering if there
was another intended way (by the maintainers) to install the OCAML version
of xenstored side-by-side with the C- version and have the option to use
either one....
Thanks
Yuvraj
-----Original Message-----
From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Alex Zeffertt
Sent: Wednesday, May 26, 2010 3:28 AM
To: Yuvraj Agarwal
Cc: 'xen-devel'
Subject: Re: FW: [Xen-devel] using OCAML xenstored
Some time ago I sent some patches against xen-ocaml-tools.hg to make it
work as
replacement for the C xenstored in xen-unstable.hg. One of the patches
was to
fix this install path issue:
http://lists.xensource.com/archives/html/xen-devel/2009-04/msg00697.html
I don't think these patches were applied. (I don't know if there is a
reason for
this.) It might be worth checking out the whole patch queue if you are
intending to use it with xen-unstable.hg.
Regards,
Alex
On 26/05/10 05:31, Yuvraj Agarwal wrote:
>
>
> Hi, Just posting this on the list too in case anyone else has experience
> with the OCAML version of xenstored?.
>
> --Yuvraj
>
> *From:* Yuvraj Agarwal [mailto:yuvraj@xxxxxxxxxxx]
> *Sent:* Tuesday, May 25, 2010 10:26 AM
> *To:* 'Boris Derzhavets'; 'Pasi Kärkkäinen'
> *Subject:* RE: [Xen-devel] using OCAML xenstored
>
> Hi Boris and Pasi,
>
> I checked out the latest xen-testing from mercurial, and edited the
> Config.mk file to have the OCAML version of xenstored built.
>
> I checked and made sure that I have all the patches, and my xm info
> shows 4.0.1-rc1. After that I built using:
>
> make xen; make tools; make stubdom
>
> make install-xen;
> make install-tools PYTHON_PREFIX_ARG=;
>
> make install-stubdom
>
> Unfortunately, it looks like even though the new OCAML version of
> xenstored is built, it appears in /usr/bin/xenstored instead of the
> usual ?/usr/sbin/xenstored? and the default part of the xenstored to use
> is the standard one (not the OCAML one)?
>
> Just FYI: This is an Ubuntu 10.04 64 bit system.
>
> root@ BlackBox:/# ll /usr/bin/xenstored (new OCAML xenstored I just
> built..)
>
> -rwxr-xr-x 1 root root 925039 2010-05-25 10:15 /usr/bin/xenstored
>
> root@ BlackBox:/# ll /usr/sbin/xenstored (<< Standard C xenstored)
>
> -rwxr-xr-x 1 root root 94728 2010-05-01 00:36 /usr/sbin/xenstored
>
> root@ BlackBox:/# which xenstored
>
> /usr/sbin/xenstored
>
> root@BlackBox:/#
>
> thanks
>
> Yuvraj
>
> * *
>
> *From:* xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] *On Behalf Of *Boris
> Derzhavets
> *Sent:* Sunday, May 23, 2010 11:47 AM
> *To:* Yuvraj Agarwal; Pasi Kärkkäinen
> *Cc:* xen-devel@xxxxxxxxxxxxxxxxxxx
> *Subject:* Re: [Xen-devel] using OCAML xenstored
>
> > 4. "make xen", make "tools" and then the "make xen-install" and "make
> > install-tools PYTHON_PREFIX_ARG="
>
> make install-tools PYTHON_PREFIX_ARG=
>
> Wrong syntax when install tools
>
> Boris
> BTW. Just a notice.
>
> --- On *Sun, 5/23/10, Pasi Kärkkäinen /<pasik@xxxxxx
> <mailto:pasik@xxxxxx>>/* wrote:
>
>
> From: Pasi Kärkkäinen <pasik@xxxxxx <mailto:pasik@xxxxxx>>
> Subject: Re: [Xen-devel] using OCAML xenstored
> To: "Yuvraj Agarwal" <yuvraj@xxxxxxxxxxx <mailto:yuvraj@xxxxxxxxxxx>>
> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx <mailto:xen-devel@xxxxxxxxxxxxxxxxxxx>
> Date: Sunday, May 23, 2010, 9:59 AM
>
> On Sat, May 22, 2010 at 05:48:58PM -0700, Yuvraj Agarwal wrote:
> > Hi All,
> >
> > I would like to give the OCAML version of xenstored a shot, since the
> > older version (in C) takes a long time to start up a large number of
VMs.
> > I have a new machine (Ubuntu 10.04 64bit) that I plan to give this a
try
> > with. Is there something else that I need to do besides the
following:
> >
> > 1. Build the 2.6.32 pvops kernel as specified in:
> > http://wiki.xensource.com/xenwiki/XenParavirtOps
> > < DONE >
> > 2. Download the xen-4.0.0 stable version from
> > http://www.xen.org/products/xen_source.html
> > 3. change Config.mk flag CONFIG_OCAML_XENSTORED ?= n to "y" as"
> > CONFIG_OCAML_XENSTORED ?= y
> > 4. "make xen", make "tools" and then the "make xen-install" and "make
> > install-tools PYTHON_PREFIX_ARG="
> >
> > Is there something else needed? Are there any recent patches to the
OCAML
> > xenstored that I need to apply?
> >
>
> Just browse through http://xenbits.xen.org/xen-unstable.hd and
> http://xenbits.xen.org/xen-4.0-testing.hg changelogs.
>
> xen-4.0-testing.hg is currently at 4.0.1-rc1 stage.
>
> -- Pasi
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
</mc/compose?to=Xen-devel@xxxxxxxxxxxxxxxxxxx>
> http://lists.xensource.com/xen-devel
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home