On Tue, Apr 27, 2010 at 10:14:40AM -0700, Yuvraj Agarwal wrote:
> I am not using grub2; using grub-legacy instead.
>
> Also, once the dom0 boots up I do have to set the dom0 mem to:
>
> (1) xm mem-set 0 12000 (otherwise when starting up a lot of domU it
> would run out of memory)
> and
> (2) echo 1548576 > /proc/sys/fs/aio-max-nr
>
You might want to use dom0_mem=<X>M option for xen.gz instead.
See:
http://wiki.xensource.com/xenwiki/XenBestPractices
-- Pasi
>
> My /boot/grub/menu.lst (pasted relevant lines)
> **************************************************
>
> root@MESL-BlackBox:/usr/src# cat /boot/grub/menu.lst
> # menu.lst - See: grub(8), info grub, update-grub(8)
> # grub-install(8), grub-floppy(8),
> # grub-md5-crypt, /usr/share/doc/grub
> # and /usr/share/doc/grub-doc/.
>
> ## default num
> # Set the default entry to the entry number NUM. Numbering starts from 0,
> and
> # the entry number 0 is the default if the command is not used.
> #
> # You can specify 'saved' instead of a number. In this case, the default
> entry
> # is the entry saved with the command 'savedefault'.
> # WARNING: If you are using dmraid do not use 'savedefault' or your
> # array will desync and will not let you boot your system.
> default 0
>
> ## timeout sec
> # Set a timeout, in SEC seconds, before automatically booting the default
> entry
> # (normally the first entry defined).
> timeout 20
>
> ### BEGIN AUTOMAGIC KERNELS LIST
> ## lines between the AUTOMAGIC KERNELS LIST markers will be modified
> ## by the debian update-grub script except for the default options below
>
> ## DO NOT UNCOMMENT THEM, Just edit them to your needs
>
> ## ## Start Default Options ##
> ## default kernel options
> ## default kernel options for automagic boot options
> ## If you want special options for specific kernels use kopt_x_y_z
> ## where x.y.z is kernel version. Minor versions can be omitted.
> ## e.g. kopt=root=/dev/hda1 ro
> ## kopt_2_6_8=root=/dev/hdc1 ro
> ## kopt_2_6_8_2_686=root=/dev/hdc2 ro
> # kopt=root=UUID=909f7c32-639a-469d-b34b-b418d2b6a2dc ro
>
> ## default grub root device
> ## e.g. groot=(hd0,0)
> # groot=909f7c32-639a-469d-b34b-b418d2b6a2dc
>
> ## should update-grub create alternative automagic boot options
> ## e.g. alternative=true
> ## alternative=false
> # alternative=true
>
> ## should update-grub lock alternative automagic boot options
> ## e.g. lockalternative=true
> ## lockalternative=false
> # lockalternative=false
>
> ## additional options to use with the default boot option, but not with
> the
> ## alternatives
> ## e.g. defoptions=vga=791 resume=/dev/hda5
> # defoptions=quiet splash
>
> ## should update-grub lock old automagic boot options
> ## e.g. lockold=false
> ## lockold=true
> # lockold=false
>
> ## Xen hypervisor options to use with the default Xen boot option
> # xenhopt=dom0_max_vcpus=1 dom0_mem=8192
>
> ## Xen Linux kernel options to use with the default Xen boot option
> # xenkopt=console=tty0
>
> ## altoption boot targets option
> ## multiple altoptions lines are allowed
> ## e.g. altoptions=(extra menu suffix) extra boot options
> ## altoptions=(recovery) single
> # altoptions=(recovery mode) single
>
> ## controls how many kernels should be put into the menu.lst
> ## only counts the first occurence of a kernel, not the
> ## alternative kernel options
> ## e.g. howmany=all
> ## howmany=7
> # howmany=all
>
> ## specify if running in Xen domU or have grub detect automatically
> ## update-grub will ignore non-xen kernels when running in domU and vice
> versa
> ## e.g. indomU=detect
> ## indomU=true
> ## indomU=false
> # indomU=detect
>
> ## should update-grub create memtest86 boot option
> ## e.g. memtest86=true
> ## memtest86=false
> # memtest86=true
>
> ## should update-grub adjust the value of the default booted system
> ## can be true or false
> # updatedefaultentry=false
>
> ## should update-grub add savedefault to the default options
> ## can be true or false
> # savedefault=false
>
> ## ## End Default Options ##
>
> title Xen 4.0.0 / Debian GNU/Linux, kernel 2.6.31.13
> root (hd0,0)
> kernel /boot/xen-4.0.0.gz
> module /boot/vmlinuz-2.6.31.13 root=/dev/sda1 ro
>
> title Xen 3.4.2 / Debian GNU/Linux, kernel 2.6.31.8-xenapr2010
> root (hd0,0)
> kernel /boot/xen-3.4.2.gz
> module /boot/vmlinuz-2.6.31.8-xenapr2010 root=/dev/sda1 ro
> console=tty0
> module /boot/initrd.img-2.6.31.8-xenapr2010
>
> ### END DEBIAN AUTOMAGIC KERNELS LIST
>
>
> Please paste your dom0 grub.conf.
> Are you using memory ballooning?
>
> -- Pasi
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home