Hello!
This was originally reported to the Debian BTS,
<http://bugs.debian.org/576877>, but Ian Campbell suggested to forward it
to xen-devel.
To get the Debian linux-image-2.6.32-4-xen-amd64 2.6.32-11 kernel to
boot, I need to supply mem=4G. This was not necessary with the 2.6.32-10
kernel.
I only changed the kernel, no further changes.
2.6.32-11 is ``based on commit f64df18aae5ab07b44bdcc2334cf0044ef46320c
of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git.'' --
according to debian/patches/features/all/xen/pvops.patch.
commit f64df18aae5ab07b44bdcc2334cf0044ef46320c
Merge: d945b01 d69a8da
Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@xxxxxxxxxx>
Date: Thu Mar 25 17:00:21 2010 -0700
Merge commit 'd69a8da4f6f2bb1815d2bc2f49afed3f3ee4f07d' into
xen/stable-2.6.32.x
* commit 'd69a8da4f6f2bb1815d2bc2f49afed3f3ee4f07d':
xen/apic: Don't register GSI in pre-setup
xen/apic: Map physical interrupt before setting up GSI
xen/apic: Control-flow cleanup in xen_register_gsi
The noreboot and nopat options that Ian suggested in
<http://bugs.debian.org/576877#10> have no effect. (I always have
noreboot specified.)
2.6.32-10:
(XEN) Xen version 3.4 (Debian 3.4.3~rc3-1) (waldi@xxxxxxxxxx) (gcc version
4.4.3 (Debian 4.4.3-2) ) Mon Mar 1 21:16:18 UTC 2010
(XEN) Command line:
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e000 (usable)
(XEN) 000000000009e000 - 00000000000a0000 (reserved)
(XEN) 00000000000e4000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000ddee0000 (usable)
(XEN) 00000000ddee0000 - 00000000ddeef000 (ACPI data)
(XEN) 00000000ddeef000 - 00000000ddf00000 (ACPI NVS)
(XEN) 00000000ddf00000 - 00000000e0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000fff00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000120000000 (usable)
(XEN) System RAM: 4062MB (4159992kB)
2.6.32-11: resets the machine immediatelly, no log messages visible
(don't have serial console set-up).
2.6.32-11, with mem=4G:
(XEN) Xen version 3.4 (Debian 3.4.3~rc3-1) (waldi@xxxxxxxxxx) (gcc version
4.4.3 (Debian 4.4.3-2) ) Mon Mar 1 21:16:18 UTC 2010
(XEN) Command line: mem=4G
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Truncating RAM from 4718592kB to 4194304kB
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e000 (usable)
(XEN) 000000000009e000 - 00000000000a0000 (reserved)
(XEN) 00000000000e4000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000ddee0000 (usable)
(XEN) 00000000ddee0000 - 00000000ddeef000 (ACPI data)
(XEN) 00000000ddeef000 - 00000000ddf00000 (ACPI NVS)
(XEN) 00000000ddf00000 - 00000000e0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000fff00000 - 0000000100000000 (reserved)
(XEN) System RAM: 3550MB (3635704kB)
/proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 47
model name : AMD Sempron(tm) Processor 3000+
stepping : 2
cpu MHz : 1800.085
cache size : 128 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de tsc msr pae cx8 apic mtrr cmov clflush mmx fxsr
sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up rep_good pni
hypervisor lahf_lm
bogomips : 3600.17
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
-- Package-specific info:
** Version:
Linux version 2.6.32-4-xen-amd64 (Debian 2.6.32-11) (maks@xxxxxxxxxx) (gcc
version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Mon Apr 5 23:19:15 UTC 2010
** Command line:
root=/dev/mapper/vg0-boole--root ro console=tty0
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 3.594644] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 3.595448] usbcore: registered new interface driver hiddev
[ 3.599715] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0
GB/74.5 GiB)
[ 3.599855] sd 2:0:0:0: [sda] Write Protect is off
[ 3.599893] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.599938] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.600295] sda:
[ 3.603437] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:03.0/usb2/2-3/2-3:1.0/input/input4
[ 3.603627] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10
Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.0-3/input0
[ 3.603717] usbcore: registered new interface driver usbhid
[ 3.603755] usbhid: v2.6:USB HID core driver
[ 3.613586] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 3.614071] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.625464] sda1
[ 3.626452] sd 2:0:0:0: [sda] Attached SCSI disk
[ 5.544048] floppy0: no floppy controllers found
[ 5.611207] device-mapper: uevent: version 1.0.3
[ 5.612270] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-devel@xxxxxxxxxx
[ 5.876201] PM: Starting manual resume from disk
[ 5.876242] PM: Resume from partition 254:1
[ 5.876244] PM: Checking hibernation image.
[ 5.876535] PM: Error -22 checking image file
[ 5.876538] PM: Resume from disk failed.
[ 5.929409] kjournald starting. Commit interval 5 seconds
[ 5.929471] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.388166] udev: starting version 151
[ 7.941584] processor LNXCPU:00: registered as cooling_device0
[ 8.258516] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.273361] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.552543] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.568814] EDAC MC: Ver: 2.1.0 Apr 5 2010
[ 8.582764] parport_pc 00:08: reported by Plug and Play ACPI
[ 8.582899] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 8.675567] EDAC amd64_edac: Ver: 3.2.0 Apr 5 2010
[ 8.675964] EDAC amd64: ECC is enabled by BIOS.
[ 8.676454] EDAC MC: Rev E or earlier detected
[ 8.677722] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV
0000:00:18.2
[ 8.678852] EDAC PCI0: Giving out device to module 'amd64_edac' controller
'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 8.839689] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.989920] xen: registering gsi 18 triggering 0 polarity 1
[ 8.989933] alloc irq_desc for 18 on node 0
[ 8.989937] alloc kstat_irqs on node 0
[ 8.989947] xen: --> irq=18
[ 8.989958] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 9.312097] intel8x0_measure_ac97_clock: measured 53952 usecs (2596 samples)
[ 9.312140] intel8x0: clocking to 48000
[ 11.580049] floppy0: no floppy controllers found
[ 12.959737] EXT3 FS on dm-0, internal journal
[ 13.297799] Adding 974840k swap on /dev/mapper/vg0-boole--swap. Priority:-1
extents:1 across:974840k
[ 13.506263] kjournald starting. Commit interval 5 seconds
[ 13.506564] EXT3 FS on dm-2, internal journal
[ 13.506633] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.984105] loop: module loaded
[ 14.288494] Bridge firewalling registered
[ 14.333916] device eth0 entered promiscuous mode
[ 14.337838] r8169: eth0: link up
[ 14.345691] br0: port 1(eth0) entering learning state
[ 24.588013] br0: no IPv6 routers present
[ 24.992008] eth0: no IPv6 routers present
[ 29.344014] br0: port 1(eth0) entering forwarding state
[ 44.728065] RPC: Registered udp transport module.
[ 44.728112] RPC: Registered tcp transport module.
[ 44.728147] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 44.810238] Slow work thread pool: Starting up
[ 44.810370] Slow work thread pool: Ready
[ 44.810504] FS-Cache: Loaded
[ 44.862639] FS-Cache: Netfs 'nfs' registered for caching
[ 44.896796] svc: failed to register lockdv1 RPC service (errno 97).
[ 45.430933] fuse init (API version 7.13)
[ 46.057971] Event-channel device installed.
[ 46.255770] alloc irq_desc for 502 on node 0
[ 46.255776] alloc kstat_irqs on node 0
[ 46.255853] xenbus_probe wake_waiting
[ 46.255920] xenbus_probe wake_waiting
[ 46.255975] alloc irq_desc for 501 on node 0
[ 46.255979] alloc kstat_irqs on node 0
[ 46.257009] XENBUS: Unable to read cpu state
[ 46.257711] xenbus_probe_devices backend
[ 46.258085] xenbus_probe_devices failed xenbus_directory
[ 46.258128] backend_probe_and_watch devices probed ok
[ 46.258386] backend_probe_and_watch watch add ok ok
[ 46.258425] backend_probe_and_watch all done
[ 46.258460] xenbus_probe_devices device
[ 46.258667] xenbus_probe_devices failed xenbus_directory
[ 46.258705] frontend_probe_and_watch devices probed ok
[ 46.258883] frontend_probe_and_watch watch add ok ok
[ 46.258920] frontend_probe_and_watch all done
[ 54.348904] Bluetooth: Core ver 2.15
[ 54.349059] NET: Registered protocol family 31
[ 54.349096] Bluetooth: HCI device and connection manager initialized
[ 54.349134] Bluetooth: HCI socket layer initialized
[ 54.465496] Bluetooth: L2CAP ver 2.14
[ 54.465541] Bluetooth: L2CAP socket layer initialized
[ 54.495468] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 54.495515] Bluetooth: BNEP filters: protocol multicast
[ 54.498713] Bluetooth: RFCOMM TTY layer initialized
[ 54.498765] Bluetooth: RFCOMM socket layer initialized
[ 54.498802] Bluetooth: RFCOMM ver 1.11
[ 54.532711] Bluetooth: SCO (Voice Link) ver 0.6
[ 54.532757] Bluetooth: SCO socket layer initialized
** Model information
sys_vendor: FUJITSU SIEMENS
product_name: D2264-A1
product_version:
chassis_vendor: FUJITSU SIEMENS
chassis_version:
bios_vendor: FUJITSU SIEMENS // Phoenix Technologies Ltd.
bios_version: 5.00 R1.07-01.2264.A1
board_vendor: FUJITSU SIEMENS
board_name: D2264-A1
board_version: S26361-D2264-A1
** Loaded modules:
Module Size Used by
sco 7209 2
bnep 9411 2
rfcomm 29565 0
l2cap 24704 4 bnep,rfcomm
crc16 1319 1 l2cap
bluetooth 41795 6 sco,bnep,rfcomm,l2cap
rfkill 13012 2 bluetooth
xen_evtchn 4259 1
xenfs 9472 1
fuse 50126 1
nfs 240554 1
lockd 57539 1 nfs
fscache 29818 1 nfs
nfs_acl 2031 1 nfs
auth_rpcgss 33460 1 nfs
sunrpc 161159 11 nfs,lockd,nfs_acl,auth_rpcgss
bridge 39598 0
stp 1440 1 bridge
loop 11783 0
snd_intel8x0 24122 0
snd_ac97_codec 99186 1 snd_intel8x0
ac97_bus 1086 1 snd_ac97_codec
amd64_edac_mod 13630 0
snd_pcm 60503 2 snd_intel8x0,snd_ac97_codec
parport_pc 18855 0
psmouse 49521 0
parport 27938 1 parport_pc
snd_timer 15502 1 snd_pcm
edac_core 29245 3 amd64_edac_mod
shpchp 26264 0
edac_mce_amd 6369 1 amd64_edac_mod
pcspkr 1699 0
serio_raw 3752 0
k8temp 3139 0
pci_hotplug 21171 1 shpchp
snd 46350 4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 4598 1 snd
snd_page_alloc 6217 2 snd_intel8x0,snd_pcm
evdev 7336 11
container 2389 0
processor 30247 0
ext3 106502 2
jbd 37053 1 ext3
mbcache 4970 1 ext3
dm_mod 53674 18
sg 18744 0
sd_mod 29689 2
crc_t10dif 1276 1 sd_mod
usbhid 33244 0
sr_mod 12602 0
hid 62793 1 usbhid
cdrom 29399 1 sr_mod
sata_sis 3730 1
ata_generic 2983 0
ohci_hcd 19212 0
pata_sis 9623 1 sata_sis
ehci_hcd 30802 0
r8169 28877 0
mii 3210 1 r8169
libata 132183 3 sata_sis,ata_generic,pata_sis
button 4634 0
usbcore 121815 4 usbhid,ohci_hcd,ehci_hcd
nls_base 6377 1 usbcore
scsi_mod 121925 4 sg,sd_mod,sr_mod,libata
thermal 11674 0
fan 3346 0
thermal_sys 11878 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 761/M761 Host
[1039:0761] (rev 01)
Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1099]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SG86C202
[1039:0002] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fa100000-fa1fffff
Prefetchable memory behind bridge: f0000000-f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS965 [MuTIOL
Media IO] [1039:0965] (rev 48)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE]
[1039:5513] (rev 01) (prog-if 80 [Master])
Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1095]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Interrupt: pin ? routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1c80 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_sis
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS]
AC'97 Sound Controller [1039:7012] (rev a0)
Subsystem: Fujitsu Technology Solutions Device [1734:109c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 173 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at 1400 [size=256]
Region 1: I/O ports at 1000 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1095]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1095]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fa001000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Fujitsu Technology Solutions D2030-A1 Motherboard [1734:1095]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fa002000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0
Controller [1039:7002] (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions D2030-A1 [1734:1095]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fa003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:05.0 IDE interface [0101]: Silicon Integrated Systems [SiS] 182 SATA/RAID
Controller [1039:0182] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Fujitsu Technology Solutions D2030-A1 [1734:1095]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 1cb0 [size=8]
Region 1: I/O ports at 1ca4 [size=4]
Region 2: I/O ports at 1ca8 [size=8]
Region 3: I/O ports at 1ca0 [size=4]
Region 4: I/O ports at 1c90 [size=16]
Region 5: I/O ports at 1c00 [size=128]
Capabilities: <access denied>
Kernel driver in use: sata_sis
00:06.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
[1039:000a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet [10ec:8169] (rev 10)
Subsystem: Fujitsu Technology Solutions D2030-A1 [1734:1091]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at fa004000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r8169
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
00:1f.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
[1039:0004] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS]
661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter [1039:6330] (rev 03)
(prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions D2030-A1 [1734:1099]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
BIST result: 00
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at fa100000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 2000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel
Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-4-xen-amd64 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-4-xen-amd64 depends on:
ii debconf [debconf-2.0] 1.5.30 Debian configuration management sy
ii initramfs-tools 0.93.4 tools for generating an initramfs
ii linux-base 2.6.32-11 Linux image base package
ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-4-xen-amd64 recommends:
ii firmware-linux-free 2.6.32-9 Binary firmware for various driver
Versions of packages linux-image-2.6.32-4-xen-amd64 suggests:
pn grub <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-4-xen-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
ii xen-hypervisor-3.4-amd64 [xe 3.4.3~rc3-1 The Xen Hypervisor on AMD64
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-4-xen-amd64/prerm/would-invalidate-boot-loader-2.6.32-4-xen-amd64:
true
linux-image-2.6.32-4-xen-amd64/postinst/bootloader-test-error-2.6.32-4-xen-amd64:
linux-image-2.6.32-4-xen-amd64/postinst/missing-firmware-2.6.32-4-xen-amd64:
linux-image-2.6.32-4-xen-amd64/postinst/depmod-error-initrd-2.6.32-4-xen-amd64:
false
linux-image-2.6.32-4-xen-amd64/postinst/bootloader-error-2.6.32-4-xen-amd64:
linux-image-2.6.32-4-xen-amd64/prerm/removing-running-kernel-2.6.32-4-xen-amd64:
true
Regards,
Thomas
signature.asc
Description: Digital signature
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home