\ \/ /___ _ __ | || | / _ \ / _ \ _ __ ___ / /_ \ // _ \ '_ \ | || |_| | | | | | |__| '__/ __| '_ \ / \ __/ | | | |__ _| |_| | |_| |__| | | (__| (_) | /_/\_\___|_| |_| |_|(_)___(_)___/ |_| \___|\___/ (XEN) Xen version 4.0.0-rc6 (ewalsh@) (gcc version 4.4.2 20091222 (Red Hat 4.4.2-20) (GCC) ) Tue Ma0 (XEN) Latest ChangeSet: Tue Mar 09 18:18:19 2010 +0000 21022:132ac04cbdba (XEN) Command line: console=com1 com1=115200,8n1 loglvl=all guest_loglvl=all (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009a000 (usable) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bdbffc00 (usable) (XEN) 00000000bdbffc00 - 00000000bdc53c00 (ACPI NVS) (XEN) 00000000bdc53c00 - 00000000bdc55c00 (ACPI data) (XEN) 00000000bdc55c00 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 00000000fed00400 (reserved) (XEN) 00000000fed20000 - 00000000feda0000 (reserved) (XEN) 00000000fee00000 - 00000000fef00000 (reserved) (XEN) 00000000ffb00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000238000000 (usable) (XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL ) (XEN) ACPI: XSDT 000FC7CC, 009C (r1 DELL B10K 15 ASL 61) (XEN) ACPI: FACP 000FC8FC, 00F4 (r3 DELL B10K 15 ASL 61) (XEN) ACPI: DSDT FFE9DA54, 54AD (r1 DELL dt_ex 1000 INTL 20050624) (XEN) ACPI: FACS BDBFFC00, 0040 (XEN) ACPI: SSDT FFEA3020, 00AA (r1 DELL st_ex 1000 INTL 20050624) (XEN) ACPI: APIC 000FC9F0, 0092 (r1 DELL B10K 15 ASL 61) (XEN) ACPI: BOOT 000FCA82, 0028 (r1 DELL B10K 15 ASL 61) (XEN) ACPI: ASF! 000FCAAA, 0096 (r32 DELL B10K 15 ASL 61) (XEN) ACPI: MCFG 000FCB40, 003E (r1 DELL B10K 15 ASL 61) (XEN) ACPI: HPET 000FCB7E, 0038 (r1 DELL B10K 15 ASL 61) (XEN) ACPI: TCPA 000FCDDA, 0032 (r1 DELL B10K 15 ASL 61) (XEN) ACPI: ____ 000FCE0C, 0030 (r1 DELL B10K 15 ASL 61) (XEN) ACPI: SLIC 000FCBB6, 0176 (r1 DELL B10K 15 ASL 61) (XEN) ACPI: SSDT BDBFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624) (XEN) ACPI: SSDT BDC00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624) (XEN) ACPI: SSDT BDC00452, 01F9 (r1 DpgPmm Cpu2Ist 11 INTL 20050624) (XEN) ACPI: SSDT BDC0085B, 01F9 (r1 DpgPmm Cpu3Ist 11 INTL 20050624) (XEN) ACPI: SSDT BDC00C64, 0190 (r1 DpgPmm CpuPm 10 INTL 20050624) (XEN) System RAM: 7977MB (8168776kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000238000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000fe710 (XEN) DMI 2.5 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[bdbffc0c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) (XEN) Processor #2 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) (XEN) Processor #3 7:7 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2992.523 MHz processor. (XEN) Initing memory sharing. (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 0 (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) HVM: ASIDs disabled. (XEN) HVM: VMX enabled (XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) xsave_init: using cntxt_size: 0x240 and states: 00000000:00000003 (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU0 has no CMCI support (XEN) I/O virtualisation disabled (XEN) CPU0: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a (XEN) Booting processor 1/1 eip 88000 (XEN) Initializing CPU#1 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 1 (XEN) HVM: ASIDs disabled. (XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU1 has no CMCI support (XEN) CPU1: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a (XEN) Booting processor 2/2 eip 88000 (XEN) Initializing CPU#2 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 2 (XEN) HVM: ASIDs disabled. (XEN) xsave_init: cpu2: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) Intel machine check reporting enabled on CPU#2. (XEN) CPU2: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU2 has no CMCI support (XEN) CPU2: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a (XEN) Booting processor 3/3 eip 88000 (XEN) Initializing CPU#3 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 6144K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 3 (XEN) HVM: ASIDs disabled. (XEN) xsave_init: cpu3: cntxt_max_size: 0x240 and states: 00000000:00000003 (XEN) Intel machine check reporting enabled on CPU#3. (XEN) CPU3: Thermal monitoring enabled (TM2) (XEN) CMCI: CPU3 has no CMCI support (XEN) CPU3: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz stepping 0a (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 4 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET �(XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) Brought up 4 CPUs (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) HPET's MSI mode hasn't been supported when Interrupt Remapping is enabled. (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1a17000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000228000000->0000000230000000 (1965740 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81a17000 (XEN) Init. ramdisk: ffffffff81a17000->ffffffff836f4c00 (XEN) Phys-Mach map: ffffffff836f5000->ffffffff84634560 (XEN) Start info: ffffffff84635000->ffffffff846354b4 (XEN) Page tables: ffffffff84636000->ffffffff8465d000 (XEN) Boot stack: ffffffff8465d000->ffffffff8465e000 (XEN) TOTAL: ffffffff80000000->ffffffff84800000 (XEN) ENTRY ADDRESS: ffffffff81770200 (XEN) Dom0 has maximum 4 VCPUs (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 168kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-pvops-dom0 (ewalsh@) (gcc version 4.4.2 20091222 (R0 Command line: ro root=/dev/sda2 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLEn KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009a000 (usable) Xen: 00000000000a0000 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000bdbffc00 (usable) Xen: 00000000bdbffc00 - 00000000bdc53c00 (ACPI NVS) Xen: 00000000bdc53c00 - 00000000bdc55c00 (ACPI data) Xen: 00000000bdc55c00 - 00000000c0000000 (reserved) Xen: 00000000e0000000 - 00000000f0000000 (reserved) Xen: 00000000fec00000 - 00000000fed00400 (reserved) Xen: 00000000fed20000 - 00000000feda0000 (reserved) Xen: 00000000fee00000 - 00000000fef00000 (reserved) Xen: 00000000ffb00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 00000001e7eac000 (usable) DMI 2.5 present. last_pfn = 0x1e7eac max_arch_pfn = 0x400000000 last_pfn = 0xbdbff max_arch_pfn = 0x400000000 init_memory_mapping: 0000000000000000-00000000bdbff000 init_memory_mapping: 0000000100000000-00000001e7eac000 RAMDISK: 01a17000 - 036f4c00 ACPI: RSDP 00000000000fec00 00024 (v02 DELL ) ACPI: XSDT 00000000000fc7cc 0009C (v01 DELL B10K 00000015 ASL 00000061) ACPI: FACP 00000000000fc8fc 000F4 (v03 DELL B10K 00000015 ASL 00000061) ACPI: DSDT 00000000ffe9da54 054AD (v01 DELL dt_ex 00001000 INTL 20050624) ACPI: FACS 00000000bdbffc00 00040 ACPI: SSDT 00000000ffea3020 000AA (v01 DELL st_ex 00001000 INTL 20050624) ACPI: APIC 00000000000fc9f0 00092 (v01 DELL B10K 00000015 ASL 00000061) ACPI: BOOT 00000000000fca82 00028 (v01 DELL B10K 00000015 ASL 00000061) ACPI: ASF! 00000000000fcaaa 00096 (v32 DELL B10K 00000015 ASL 00000061) ACPI: MCFG 00000000000fcb40 0003E (v01 DELL B10K 00000015 ASL 00000061) ACPI: HPET 00000000000fcb7e 00038 (v01 DELL B10K 00000015 ASL 00000061) ACPI: TCPA 00000000000fcdda 00032 (v01 DELL B10K 00000015 ASL 00000061) ACPI: ____ 00000000000fce0c 00030 (v01 DELL B10K 00000015 ASL 00000061) ACPI: SLIC 00000000000fcbb6 00176 (v01 DELL B10K 00000015 ASL 00000061) ACPI: SSDT 00000000bdbffc40 001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624) ACPI: SSDT 00000000bdc00049 001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624) ACPI: SSDT 00000000bdc00452 001F9 (v01 DpgPmm Cpu2Ist 00000011 INTL 20050624) ACPI: SSDT 00000000bdc0085b 001F9 (v01 DpgPmm Cpu3Ist 00000011 INTL 20050624) ACPI: SSDT 00000000bdc00c64 00190 (v01 DpgPmm CpuPm 00000010 INTL 20050624) No NUMA configuration found Faking a node at 0000000000000000-00000001e7eac000 Bootmem setup node 0 0000000000000000-00000001e7eac000 NODE_DATA [0000000000008000 - 000000000001ffff] bootmap [0000000000020000 - 000000000005cfd7] pages 3d (9 early reservations) ==> bootmem [0000000000 - 01e7eac000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0004636000 - 000465d000] XEN PAGETABLES ==> [0004636000 - 000465d000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 00019f6148] TEXT DATA BSS ==> [0001000000 - 00019f6148] #4 [0001a17000 - 00036f4c00] RAMDISK ==> [0001a17000 - 00036f4c00] #5 [00036f5000 - 0004636000] XEN START INFO ==> [00036f5000 - 0004636000] #6 [00019f7000 - 00019f71f0] BRK ==> [00019f7000 - 00019f71f0] #7 [0000100000 - 00006c8000] PGTABLE ==> [0000100000 - 00006c8000] #8 [000465d000 - 0004da1000] PGTABLE ==> [000465d000 - 0004da1000] found SMP MP-table at [ffff8800000fe710] fe710 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x001e7eac Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000000 -> 0x0000009a 0: 0x00000100 -> 0x000bdbff 0: 0x00100000 -> 0x001e7eac ACPI: PM-Timer IO Port: 0x808 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ERROR: Unable to locate IOAPIC for GSI 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ERROR: Unable to locate IOAPIC for GSI 9 Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a701 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009a000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000bdbff000 - 00000000bdc00000 PM: Registered nosave memory: 00000000bdc00000 - 00000000bdc53000 PM: Registered nosave memory: 00000000bdc53000 - 00000000bdc54000 PM: Registered nosave memory: 00000000bdc54000 - 00000000bdc55000 PM: Registered nosave memory: 00000000bdc55000 - 00000000bdc56000 PM: Registered nosave memory: 00000000bdc56000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000 PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000 PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) Booting paravirtualized kernel on Xen Xen version: 4.0.0-rc6 (preserve-AD) (dom0) NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 28 pages/cpu @ffff880028038000 s85848 r8192 d20648 u114688 pcpu-alloc: s85848 r8192 d20648 u114688 alloc=28*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Xen: using vcpu_info placement Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1698238 Policy zone: Normal Kernel command line: ro root=/dev/sda2 LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc Kn PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 DMA: software IO TLB at phys 0x20000000 - 0x24000000 xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 xen_swiotlb_fixup: buf=ffff880024060000 size=32768 Memory: 6677316k/7994032k available (4548k kernel code, 1085852k absent, 230864k reserved, 2977k da) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:1024 Already setup the GSI :0 Already setup the GSI :1 Already setup the GSI :2 Already setup the GSI :3 Already setup the GSI :4 Already setup the GSI :5 Already setup the GSI :6 Already setup the GSI :7 Already setup the GSI :8 Already setup the GSI :9 Already setup the GSI :10 Already setup the GSI :11 Already setup the GSI :12 Already setup the GSI :13 Already setup the GSI :14 Already setup the GSI :15 Console: colour VGA+ 80x25 console [hvc0] enabled allocated 69468160 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups installing Xen timer for CPU 0 Detected 2992.522 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.04 BogoMIPS (lpj=29) Security Framework initialized SELinux: Initializing. Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only. SMP alternatives: switching to UP code ACPI: Core revision 20090903 installing Xen timer for CPU 1 SMP alternatives: switching to SMP code Initializing CPU#1 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 installing Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 2/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 installing Xen timer for CPU 3 Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 3/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 Brought up 4 CPUs Grant table initialized regulator: core version 0.5 Time: 21:17:51 Date: 03/16/10 NET: Registered protocol family 16 xenbus_probe_init ok ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: ACPI Dock Station Driver: 1 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1e.0: transparent bridge (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:02.0 (XEN) PCI add device 00:02.1 (XEN) PCI add device 00:03.0 (XEN) PCI add device 00:03.2 (XEN) PCI add device 00:03.3 (XEN) PCI add device 00:19.0 (XEN) PCI add device 00:1a.0 (XEN) PCI add device 00:1a.1 (XEN) PCI add device 00:1a.2 (XEN) PCI add device 00:1a.7 (XEN) PCI add device 00:1b.0 (XEN) PCI add device 00:1c.0 (XEN) PCI add device 00:1c.1 (XEN) PCI add device 00:1d.0 (XEN) PCI add device 00:1d.1 (XEN) PCI add device 00:1d.2 (XEN) PCI add device 00:1d.7 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 00:1f.2 (XEN) PCI add device 00:1f.3 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) xenbus_probe_backend_init bus registered ok xenbus_probe_frontend_init bus registered ok xen_balloon: Initialising balloon driver with page order 0. vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switching to clocksource xen pnp: PnP ACPI init ACPI: bus type pnp registered xen_allocate_pirq: returning irq 13 for gsi 13 Already setup the GSI :13 xen_allocate_pirq: returning irq 8 for gsi 8 Already setup the GSI :8 xen_allocate_pirq: returning irq 7 for gsi 7 Already setup the GSI :7 xen_allocate_pirq: returning irq 4 for gsi 4 Already setup the GSI :4 pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x800-0x85f has been reserved system 00:01: ioport range 0xc00-0xc7f has been reserved system 00:01: ioport range 0x860-0x8ff has been reserved PM-Timer failed consistency check (0x0xffffff) - aborting. pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xfe500000-0xfe5fffff pci 0000:00:01.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x1000-0x1fff pci 0000:00:1c.0: MEM window: 0xfe400000-0xfe4fffff pci 0000:00:1c.0: PREFETCH window: 0x000000c0000000-0x000000c01fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x2000-0x2fff pci 0000:00:1c.1: MEM window: 0xfe300000-0xfe3fffff pci 0000:00:1c.1: PREFETCH window: 0x000000c0200000-0x000000c03fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI :16 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 29559k freed DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config PCI-DMA: Using software bounce buffering for IO (SWIOTLB) DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 DMA: software IO TLB at phys 0x20000000 - 0x24000000 Simple Boot Flag at 0x7a set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1268774274.147:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 13099 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 pci-stub: invalid id string "" input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [VBTN] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] Event-channel device installed. registering netback hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 tpm_tis 00:08: 1.2 TPM (device-id 0x4A10, rev-id 78) [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI :16 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] set up 31M of stolen space [drm] TMDS-8: set mode 1280x1024 17 Console: switching to colour frame buffer device 160x64 fb0: inteldrmfb frame buffer device registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled xen_allocate_pirq: returning irq 17 for gsi 17 Already setup the GSI :17 serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS0 at I/O 0xec98 (irq = 17) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl RAID mode ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems sxs scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 997 ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 997 ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 997 ata4: DUMMY ata5: DUMMY ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 997 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-pvops-dom0 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-pvops-dom0 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver xen_allocate_pirq: returning irq 16 for gsi 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-pvops-dom0 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 17 for gsi 17 Already setup the GSI :17 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-pvops-dom0 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 22 for gsi 22 Already setup the GSI :22 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32-pvops-dom0 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 23 for gsi 23 Already setup the GSI :23 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32-pvops-dom0 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 17 for gsi 17 Already setup the GSI :17 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32-pvops-dom0 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected xen_allocate_pirq: returning irq 18 for gsi 18 Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.32-pvops-dom0 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice Driver 'rtc_cmos' needs updating - please use bus_type methods rtc_cmos 00:05: RTC can wake from S4 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 242 bytes nvram device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Magic number: 2:132:298 rtc_cmos 00:05: setting system clock to 2010-03-16 21:17:54 UTC (1268774274) ata6: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3: SATA link down (SStatus 4 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATAPI: PLDS DVD+/-RW DS-8A3S, HD12, max UDMA/100 ata2.00: configured for UDMA/100 ata1.00: ATA-8: ST3320418AS, CC44, max UDMA/133 ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3320418AS CC44 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DS-8A3S HD12 PQ: 0 ANSI: 5 sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 1348k freed dracut: dracut-004-4.fc12 udev: starting version 145 usb 5-1: new low speed USB device using uhci_hcd and address 2 dracut: Starting plymouth daemon Gxen_allocate_pirq: returning irq 18 for gsi 18 Already setup the GSI :18 pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:00:03.2: PCI INT C disabled Gusb 5-1: New USB device found, idVendor=0624, idProduct=0200 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: USB DSRIQ usb 5-1: Manufacturer: Avocent usb 5-1: configuration #1 chosen from 1 choice input: Avocent USB DSRIQ as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3 generic-usb 0003:0624:0200.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent USB DSRIQ] on usb-00 device-mapper: multipath: version 1.1.0 loaded input: Avocent USB DSRIQ as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input4 generic-usb 0003:0624:0200.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent USB DSRIQ] on usb-00001 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. dracut: Mounted root filesystem /dev/sda2 dracut: Loading SELinux policy type=1403 audit(1268774276.085:2): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root Welcome to Fedora Press 'I' to enter interactive startup.