xen-devel-bounces@xxxxxxxxxxxxxxxxxxx wrote on 03/20/2010 02:01:54 AM:
> On Fri, Mar 19, 2010 at 8:59 PM, Michael D Labriola <mlabriol@xxxxxxxx>
wrote:
> > xen-devel-bounces@xxxxxxxxxxxxxxxxxxx wrote on 03/18/2010 02:09:08 AM:
> >
> >> On Wed, Mar 17, 2010 at 1:09 AM, Michael D Labriola
<mlabriol@xxxxxxxx>
> > wrote:
> >> > Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> wrote on 03/16/2010
> >> > 01:21:35 PM:
> >> >
> >> >> > > > And my X log ends abruptly after this line:
> >> >> > > > (II) NOUVEAU(0): Opened GPU Channel 1
> >> >> > > >
> >> >> > > > Any ideas?
> >> >> > > >
> >> >> > >
> >> >> > > Well, this is generally the symptom that someone is confusing
> > mfns
> >> > and
> >> >> > > pfns, and therefore ends up incorrectly setting the _PAGE_IO
flag
> > in
> >> >
> >> >> > > some pte. If you run it under strace, can you identify which
> >> > mapping
> >> >> > > the fault is happening in?
> >> >> >
> >> >> > I've attached the output of 'strace -o strace-Xorg Xorg'.
Figuring
> >> > out
> >> >> > which mapping the fault is happening in is a little over my
head,
> > I'm
> >> >> > afraid. If you need different arguments to strace, let me know
and
> >> > I'll
> >> >> > do it again.
> >> >>
> >> >> So just to be sure, you took the 2.6.32 (xen/next or
> >> >> xen/stable-2.6.32.x), copied the include and nouveu directory from
> > ..?
> >> >> 2.6.33? and then ran this.
> >> >
> >> > I actually took a slightly more sadistic route than Arvind... ;-)
A
> > while
> >> > back, I backported the important stuff from the Nouveau kernel git
> > tree
> >> > back to v2.6.31. Basically guessed at which commits were
important,
> > wrote
> >> > a script to cherry pick each and every one, and spent an entire day
> >> > reading commit logs, resolving conflicts, and figuring out which
other
> >> > non-drm commits I needed. Sounds retarded, I know, but it was a
> > pretty
> >> > interesting way to get myself up to speed with the code base. The
> >> > resulting 2.6.31-nouveau kernel runs like a champ on all my
hardware.
> >> >
> >> > Then I merged that into my clone of Jeremy's xen/master which I use
> > with
> >> > Xen 3.4.2.
> >> >
> >> > Since then, I've been periodically cherry picking all new commits
off
> > the
> >> > nouveau tree. Also had to rebuild Xorg 7.5 to use xorg-server
1.7.5,
> > new
> >> > libdrm, mesa, and xf86-video-nouveau all from their respective git
> > trees
> >> > as of yesterday. (drm and xf86-video-nouveau are on their master
> >> > branches, mesa is on the 7.8 branch)
> >> >
> >> > This all works great using xen/master bare metal. It used to work
> > fine on
> >> > my old GeForce2 MX based systems in Xen. Arvind's patch made it
work
> > on
> >> > my nice new systems in Xen, but broke it on the old ones.
Everything
> >> > still works fine bare metal.
> >> >
> >> >> Did you have to edit your xorg.conf file or
> >> >> it ran just fine?
> >> >
> >> > Well, I had to create an xorg.conf that looks like this:
> >> >
> >> > Section "Device"
> >> > Identifier "foo"
> >> > Driver "nouveau"
> >> > EndSection
> >> >
> >> > Otherwise it uses the 'nv' driver... and I haven't stumbled onto
how
> > to
> >> > get nouveau to automatically get used (aside from uninstalling the
nv
> >> > driver).
> >> >
> >> >
> >> >> Was this Fedora 13 or Fedora 12?
> >> >
> >> > This is all being done on a custom 32bit Linux distro that we use
for
> > our
> >> > tightly configuration controlled system deliveries. It was fedora
> > based a
> >> > looooooooong time ago (FC5), but is completely unrecognizable now.
> >> >
> >> >
> >> >> Arvind explanation about the Nvidia driver pointed out that the
> > NVidia
> >> >> driver (drm/nouvue) can operate on different channels. Where
channel
> > 1
> >> >> is the framebuffer, and the other are for well, KMS, and other
> >> >> applications.
> >> >>
> >> >> I belive I was looking at the wrong section of the drivers (not
the
> >> >> drivers/video/gpu ones)- this certainly looks to be the issues the
> >> >> Jeremy mentioned.
> >> >>
> >> >> Also I would suggest you load drm with the debug variable set to
the
> > 255
> >> >> to get most of what his happening.
> >> >
> >> > I'll try that.
> >> >
> >> >
> >> >> Based on your strace, the last call is:
> >> >> 4000) = 0x9324000
> >> >> write(0, "(II) NOUVEAU(0): Opened GPU chan"..., 38) = 38
> >> >> ioctl(11, 0xc0106445, 0x930a908) = 0
> >> >> ioctl(11, 0x400c6444, 0xbfd2a210) = 0
> >> >> +++ killed by SIGKILL +++
> >> >>
> >> >> I cannot find what 0x45 is in the upstream Linux, so you must be
> > using a
> >> >> different nouv* driver than that. The 0x44 is:
> >> >>
> >> >> DRM_IOCTL_DEF(DRM_NOUVEAU_GEM_INFO, nouveau_gem_ioctl_info,
> > DRM_AUTH),
> >> >>
> >> >> Which looks to be pretty harmless. I presume it is the next thing
> > (using
> >> >> the address returned) that the X driver tries to do that makes it
go
> >> > boom.
> >> >
> >> I suspect that the ioctl is prior to a modeset operation. And the
> >> mode-setting is 'booming'.
> >> My kernel config has VGA console built-in fbcon as a module and I do
> >> a switch to
> >> nouveaufb at runlevel 2. Also note that the default modeset
> >> parameter is -1 and
> >> if VGA-CONSOLE is enabled, then modeset is set to 0 in the driver
> >> initialisation
> >> - which maybe the problem. Do you have modeset=1 as module parameter?
> >
> > I wasn't setting any module params for nouveau. Adding 'options
nouveau
> > modeset=1' to modprobe.conf didn't seem to make any difference.
> >
> > I've got the following in my .config:
> >
> > CONFIG_VGA_CONSOLE=y
> > CONFIG_FB=y
> > CONFIG_FB_VGA16=m
> > CONFIG_FB_VESA=y
> > CONFIG_FB_EFI=y
> > CONFIG_FB_NVIDIA=m
> > CONFIG_FB_NVIDIA_I2C=y
> > CONFIG_FB_NVIDIA_BACKLIGHT=y
> >
> - EMBEDDED - this will enable VGA_CONSOLE selection. Set sub-menu
> choices as needed
> - VGA_CONSOLE builtin
> - FB as module
> - FRAMEBUFFER_CONSOLE as a module. Enables late loading of nouveau
> * Foll. required to avoid cfb_copyarea, cfb_fillrectangle,
> cfb_imageblit linking problems with
> out-of-tree nouveau builds
> - FB_VGA16 as module - supported by all nVidia cards.
> or
> - FB_NVIDIA as module - only works for older cards.
>
> For out-of-tree nouveau builds, DO NOT select ANY accelerated drivers
> - that would enable
> the old in-tree DRM. New TTM / DRM modulesare in the new driver/gpu
tree.
>
> For in-tree builds, if nouveau is NOT in the initrd-image, system will
> boot on vga console
> >
> > How do you force the nouveaufb switch at runlevel 2? My screen
obviously
> > switches into KMS mode while udev is starting up.
> You can switch to the accelerated framebuffer console by
> modprobe nouveau
> modprobe fbcon
> fbcon will take-over console from the built-in VGA. See
> Documenation/fb/fbcon.txt
Ok, thanks. Now I've got everything compiled as modules and can load them
post-boot to switch to the nouveau framebuffer console. That actually
didn't change the X behavior at all, though. I still get the exact same
"X: Corrupted page table" messages in dmesg and my Xorg.log is just ending
with "NOUVEAU(0): Opened GPU channel 1".
> If multiple fb loaded, echo 0/1 to
/sys/devices/virtual/vtconsole/vtconX/bind
> to unbind/bind fbs and switch - if it is possible (or leave you
> without a console)
>
> If the old nvidiafb is loaded, nouveau cannot install (and vice-versa)
Well, everything seems to load just fine. I get a nice teeny font and
dmesg messages saying I'm using nouveaufb.
> BTW, are you sure the older cards support accelerated modes? Channel 1
is
> the console channel and unaccelerated X uses only that. AIGLX will
> start up channel 2,
> and if X is gallium-enabled, channel 3 will start. libGL apps will start
> new channels (upto what the card supports - which varies). I assume the
patch
> does NOT affect unaccelerated X on the older cards?
Which accelerated modes are you refering to? My understanding was that
the old GeForce2 cards should work for nouveaufb, the 2d xf86-nouveau
driver, and gallium's swrast_dri stuff (via AIGLX), but not gallium's new
dri_nouveau stuff.
> Whats funny is that, in all my traces, X never opens channel 1 - it is
already
> opened by the console and all X has to do (using ioctls) is to do is a
> kernel-modeset,
> if native console and X are in different modes (I've not been able to
> get the native
> console to a lower resolution (got very comfortable with the higher
> res. meanwhile!)).
> Xorg used to hang saying 'Opened Channel 2' and not 1.
Now that's strange. Every single one of my boxes says Opened Channel 1,
with now reference to channel 2 at all.
> Late switching will maybe enable you to get traces
After switching post-boot, Xorg.log is still just ending. I get errors in
dmesg, but nothing at all in Xorg.log. Same exact behavior as before.
---
Michael D Labriola
Electric Boat
mlabriol@xxxxxxxx
401-848-8871 (desk)
401-848-8513 (lab)
401-316-9844 (cell)
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home