Hi,
I'm trying to run xen4-rc6 with iommu=1 option, but it hangs during the startup.
When I run it with option iommu=0, it starts ok, and I'm able to run
HVM guests(didn't try PV yet).
I have Intel Q45 chipset on the motherboard so it should have vt-d
support. As dom0 I tried jeremy's 2.6.31 and 2.6.32 kernels.
The same thing happens on two identical machines. All vt and vt-d
options are enabled in BIOS.
Here is Serial Consol log:
(XEN) Xen version 4.0.0-rc6 (root@(none)) (gcc version 4.4.3 (Debian
4.4.3-2) ) Sun Mar 14 15:51:45 UTC 2010
(XEN) Latest ChangeSet: Thu Mar 11 17:40:35 2010 +0000
21028:4152a3ce90a7
(XEN) Console output is synchronous.
(XEN) Command line: iommu=1 dom0_mem=1024288 loglvl=all
guest_loglvl=all sync_console console_to_ring com1=115200,8n1,0xe1c0,0
console=com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method
detected
(XEN) Disc information:
(XEN) Found 3 MBR signatures
(XEN) Found 3 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bd3e2000 (usable)
(XEN) 00000000bd3e2000 - 00000000bd424000 (ACPI NVS)
(XEN) 00000000bd424000 - 00000000bd542000 (reserved)
(XEN) 00000000bd542000 - 00000000bd545000 (ACPI NVS)
(XEN) 00000000bd545000 - 00000000bd645000 (reserved)
(XEN) 00000000bd645000 - 00000000bd646000 (ACPI NVS)
(XEN) 00000000bd646000 - 00000000bd64b000 (reserved)
(XEN) 00000000bd64b000 - 00000000bd653000 (ACPI data)
(XEN) 00000000bd653000 - 00000000bd66e000 (ACPI NVS)
(XEN) 00000000bd66e000 - 00000000bd68c000 (reserved)
(XEN) 00000000bd68c000 - 00000000bd692000 (ACPI NVS)
(XEN) 00000000bd692000 - 00000000bd800000 (usable)
(XEN) 00000000bd800000 - 00000000bdb00000 (reserved)
(XEN) 00000000bdc00000 - 00000000c0000000 (reserved)
(XEN) 00000000fed1c000 - 00000000fed20000 (reserved)
(XEN) 00000000ff000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000013c000000 (usable)
(XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL)
(XEN) ACPI: XSDT BD651E18, 005C (r1 INTEL DQ45CB 3B MSFT
10013)
(XEN) ACPI: FACP BD650D98, 00F4 (r4 INTEL A M I 6222004 MSFT
10013)
(XEN) ACPI: DSDT BD64B018, 4E98 (r1 INTEL DQ45CB 3B INTL
20051117)
(XEN) ACPI: FACS BD659F40, 0040
(XEN) ACPI: APIC BD650F18, 006C (r2 INTEL DQ45CB 3B MSFT
10013)
(XEN) ACPI: MCFG BD65BE18, 003C (r1 INTEL DQ45CB 3B MSFT
97)
(XEN) ACPI: ASF! BD65AD18, 00A0 (r32 INTEL DQ45CB 3B TFSM
F4240)
(XEN) ACPI: SPCR BD65BD18, 0050 (r1 INTEL DQ45CB 3B AMI.
3)
(XEN) ACPI: TCPA BD65BC98, 0032 (r2 INTEL DQ45CB 3B MSFT
1000013)
(XEN) ACPI: DMAR BD645C18, 0120 (r1 INTEL DQ45CB 3B INTL
1)
(XEN) System RAM: 3949MB (4044048kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-000000013c000000
(XEN) Domain heap initialised
(XEN) DMI 2.4 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x408
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0]
(XEN) ACPI: 32/64X FACS address mismatch in FADT -
bd654f40/00000000bd659f40, using 32
(XEN) ACPI: wakeup_vec[bd654f4c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 7:7 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) [VT-D]dmar.c:643: Host address width 36
(XEN) [VT-D]dmar.c:652: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:379: dmaru->address = fed90000
(XEN) [VT-D]dmar.c:331: endpoint: 0:1b.0
(XEN) [VT-D]dmar.c:652: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:379: dmaru->address = fed91000
(XEN) [VT-D]dmar.c:331: endpoint: 0:2.0
(XEN) [VT-D]dmar.c:331: endpoint: 0:2.1
(XEN) [VT-D]dmar.c:652: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:379: dmaru->address = fed92000
(XEN) [VT-D]dmar.c:331: endpoint: 0:3.0
(XEN) [VT-D]dmar.c:331: endpoint: 0:3.2
(XEN) [VT-D]dmar.c:331: endpoint: 0:3.3
(XEN) [VT-D]dmar.c:652: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:379: dmaru->address = fed93000
(XEN) [VT-D]dmar.c:391: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:656: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:331: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:331: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:331: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:331: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:331: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:331: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:331: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:331: endpoint: 0:1a.7
(XEN) [VT-D]dmar.c:546: RMRR region: base_addr bd62f000 end_address
bd642fff
(XEN) [VT-D]dmar.c:656: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:481: RMRR address range not in reserved memory
base = bdc00000 end = ffffffffbfffffff; iommu_inclusive_mapping=1
parameter may be needed.
(XEN) [VT-D]dmar.c:331: endpoint: 0:2.0
(XEN) [VT-D]dmar.c:331: endpoint: 0:2.1
(XEN) [VT-D]dmar.c:546: RMRR region: base_addr bdc00000 end_address
ffffffffbfffffff
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2800.206 MHz processor.
(XEN) Initing memory sharing.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states:
00000000:00000003
(XEN) xsave_init: using cntxt_size: 0x240 and states:
00000000:00000003
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU0 has no CMCI support
(XEN) [VT-D]iommu.c:1075: drhd->address = fed92000 iommu->reg =
ffff82c3fff57000
(XEN) [VT-D]iommu.c:1077: cap = c0000020630272 ecap = 1000
(XEN) [VT-D]iommu.c:1075: drhd->address = fed91000 iommu->reg =
ffff82c3fff56000
(XEN) [VT-D]iommu.c:1077: cap = c0000020630272 ecap = 1000
(XEN) [VT-D]iommu.c:1075: drhd->address = fed90000 iommu->reg =
ffff82c3fff55000
(XEN) [VT-D]iommu.c:1077: cap = c9008020e30272 ecap = 1000
(XEN) [VT-D]iommu.c:1075: drhd->address = fed93000 iommu->reg =
ffff82c3fff54000
(XEN) [VT-D]iommu.c:1077: cap = c9008020630272 ecap = 1000
(XEN) Intel VT-d Snoop Control not supported.
(XEN) Intel VT-d DMA Passthrough not supported.
(XEN) Intel VT-d Queued Invalidation not supported.
(XEN) Intel VT-d Interrupt Remapping not supported.
(XEN) I/O virtualisation enabled
(XEN) I/O virtualisation for PV guests disabled
(XEN) CPU0: Intel Pentium(R) Dual-Core CPU E6300 @ 2.80GHz
stepping 0a
(XEN) Booting processor 1/1 eip 88000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) HVM: ASIDs disabled.
(XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states:
00000000:00000003
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Thermal monitoring enabled (TM2)
(XEN) CMCI: CPU1 has no CMCI support
(XEN) CPU1: Intel Pentium(R) Dual-Core CPU E6300 @ 2.80GHz
stepping 0a
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 3.579MHz ACPI PM Timer
(XEN) Brought up 2 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:0.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:0.0: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:2.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:2.0: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:2.1
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:2.1: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:3.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:3.0: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:3.2
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:3.2: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:3.3
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:3.3: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:19.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:19.0: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:1a.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.0: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:1a.1
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.1: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:1a.2
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.2: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:1a.7
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1a.7: no extended config
(XEN) [VT-D]iommu.c:1321:d32767 domain_context_mapping:PCIe: bdf = 0:1b.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1b.0: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:1d.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.0: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:1d.1
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.1: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:1d.2
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.2: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:1d.7
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1d.7: no extended config
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1e.0: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:1f.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.0: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:1f.2
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.2: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:1f.3
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.3: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 0:1f.5
(XEN) [VT-D]mmconfig-shared.c:460: next cap:0:1f.5: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 1:0.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:1:0.0: no extended config
(XEN) [VT-D]iommu.c:1328:d32767 domain_context_mapping:PCI: bdf = 1:1.0
(XEN) [VT-D]mmconfig-shared.c:460: next cap:1:1.0: no extended config
Regards
Łukasz Oleś
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home