Why it will fail on 0xffff828bfffff0e0 ? I try to build 19913 and seems it
should be 0xffff828bffffe0e0.
If you can paste your objdump output for init_apic_ldr_phys, maybe it will be
helpful.
BTW, if SLES 11 works for you, why not continue that?
--jyh
ffff828c801879d0 <init_apic_ldr_phys>:
...........
ffff828c801879f8: b8 ff ff ff ff mov $0xffffffff,%eax
ffff828c801879fd: a3 e0 e0 ff ff 8b 82 mov %eax,0xffff828bffffe0e0
ffff828c80187a04: ff ff
ffff828c80187a06: a1 d0 e0 ff ff 8b 82 mov 0xffff828bffffe0d0,%eax
ffff828c80187a0d: ff ff
ffff828c80187a0f: 25 ff ff ff 00 and $0xffffff,%eax
ffff828c80187a14: a3 d0 e0 ff ff 8b 82 mov %eax,0xffff828bffffe0d0
...............
>-----Original Message-----
>From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
>[mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Dan Gora
>Sent: Friday, March 12, 2010 5:55 AM
>To: xen-devel@xxxxxxxxxxxxxxxxxxx
>Subject: [Xen-devel] Re: Panic on boot on Sun Blade 6270
>
>Also setting noapic and acpi=off does not change the panic...
>
>thanks,
>dan
>
>On Thu, Mar 11, 2010 at 6:40 PM, Dan Gora <dan.gora@xxxxxxxxx> wrote:
>> Hi All,
>>
>> I'm getting the attached panic in the hypervisor on a Sun 6270 running
>> xen-testing.hg changeset 19913:6063c16aeeaa. I can run xen-3.3.1 from
>> the standard SLES 11 distribution (which says that it's changeset
>> 18546 but it has many patches). Any ideas?
>>
>> thanks,
>> dan
>
>_______________________________________________
>Xen-devel mailing list
>Xen-devel@xxxxxxxxxxxxxxxxxxx
>http://lists.xensource.com/xen-devel
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home