[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.6-pvops-dom0 (yhassan@eir) (gcc version 4.3.4 (Debian 4.3.4-6) ) #7 SMP Mon Feb 1 23:29:34 EST 2010 [ 0.000000] Command line: root=/dev/mapper/vg00-root ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] xen_release_chunk: looking at area pfn 20000-cdc70 [ 0.000000] xen_release_chunk: looking at area pfn d0000-fee00 [ 0.000000] xen_release_chunk: looking at area pfn fee01-ff800 [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] Xen: 000000000009fc00 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] Xen: 00000000cdc70000 - 00000000cdc88000 (ACPI data) [ 0.000000] Xen: 00000000cdc88000 - 00000000cdcdc000 (ACPI NVS) [ 0.000000] Xen: 00000000cdcdc000 - 00000000d0000000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.6 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000 [ 0.000000] 0000000000 - 0020000000 page 4k [ 0.000000] kernel direct mapping tables up to 20000000 @ 100000-202000 [ 0.000000] RAMDISK: 01710000 - 03255600 [ 0.000000] ACPI: RSDP 00000000000fb9a0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cdc70000 00044 (v01 123009 RSDT0947 20091230 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cdc70200 00084 (v01 123009 FACP0947 20091230 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cdc704a0 0DAB2 (v01 A1470 A1470001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cdc88000 00040 [ 0.000000] ACPI: APIC 00000000cdc70390 000CC (v01 123009 APIC0947 20091230 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cdc70460 0003C (v01 123009 OEMMCFG 20091230 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cdc88040 00072 (v01 123009 OEMB0947 20091230 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cdc7f4a0 00038 (v01 123009 OEMHPET 20091230 MSFT 00000097) [ 0.000000] ACPI: GSCI 00000000cdc880c0 02024 (v01 123009 GMCHSCI 20091230 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000cdc7f4e0 000B0 (v01 123009 OEMOSFR 20091230 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cdc8b810 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0020000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0003357000 - 0003374000] XEN PAGETABLES ==> [0003357000 - 0003374000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 00016ef60c] TEXT DATA BSS ==> [0001000000 - 00016ef60c] [ 0.000000] #4 [0001710000 - 0003255600] RAMDISK ==> [0001710000 - 0003255600] [ 0.000000] #5 [0003256000 - 0003357000] XEN START INFO ==> [0003256000 - 0003357000] [ 0.000000] #6 [00016f0000 - 00016f02c0] BRK ==> [00016f0000 - 00016f02c0] [ 0.000000] #7 [0000100000 - 00001e2000] PGTABLE ==> [0000100000 - 00001e2000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] On node 0 totalpages: 130959 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 229 pages reserved [ 0.000000] DMA zone: 3698 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1736 pages used for memmap [ 0.000000] DMA32 zone: 125240 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:adc70000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Allocated 21 4k pages, static data 82528 bytes [ 0.030174] trying to map vcpu_info 0 at ffffc9000000b060, mfn c7388, offset 96 [ 0.030178] cpu 0 using vcpu_info at ffffc9000000b060 [ 0.030179] trying to map vcpu_info 1 at ffffc90000022060, mfn c739d, offset 96 [ 0.030182] cpu 1 using vcpu_info at ffffc90000022060 [ 0.030184] trying to map vcpu_info 2 at ffffc90000039060, mfn c73b2, offset 96 [ 0.030186] cpu 2 using vcpu_info at ffffc90000039060 [ 0.030188] trying to map vcpu_info 3 at ffffc90000050060, mfn c73c7, offset 96 [ 0.030190] cpu 3 using vcpu_info at ffffc90000050060 [ 0.030191] Xen: using vcpu_info placement [ 0.030196] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128938 [ 0.030200] Kernel command line: root=/dev/mapper/vg00-root ro [ 0.030207] PID hash table entries: 2048 (order: 11, 16384 bytes) [ 0.030278] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.030379] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.030739] Initializing CPU#0 [ 0.030762] PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB) [ 0.039291] xen_swiotlb_fixup: buf=ffff880003e75000 size=67108864 [ 0.056487] xen_swiotlb_fixup: buf=ffff880007ed5000 size=32768 [ 0.056551] Placing 64MB Xen software IO TLB between ffff880003e75000 - ffff880007e75000 [ 0.056553] Xen software IO TLB at phys 0x3e75000 - 0x7e75000 [ 0.058330] Memory: 411804k/524288k available (3730k kernel code, 452k absent, 111400k reserved, 1823k data, 484k init) [ 0.058368] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.058386] Hierarchical RCU implementation. [ 0.058391] NR_IRQS:4352 nr_irqs:440 [ 0.058440] xen: registering gsi 0 triggering 1 polarity 0 [ 0.058448] xen: --> irq=0 [ 0.058450] xen_set_ioapic_routing: irq 0 gsi 0 vector 240 ioapic 0 pin 0 triggering 0 polarity 0 [ 0.058462] xen: registering gsi 1 triggering 1 polarity 0 [ 0.058465] xen: --> irq=1 [ 0.058467] xen_set_ioapic_routing: irq 1 gsi 1 vector 32 ioapic 0 pin 1 triggering 0 polarity 0 [ 0.058471] xen: registering gsi 3 triggering 1 polarity 0 [ 0.058474] xen: --> irq=3 [ 0.058476] xen_set_ioapic_routing: irq 3 gsi 3 vector 40 ioapic 0 pin 3 triggering 0 polarity 0 [ 0.058480] xen: registering gsi 4 triggering 1 polarity 0 [ 0.058483] xen: --> irq=4 [ 0.058485] xen_set_ioapic_routing: irq 4 gsi 4 vector 48 ioapic 0 pin 4 triggering 0 polarity 0 [ 0.058489] xen: registering gsi 5 triggering 1 polarity 0 [ 0.058492] xen: --> irq=5 [ 0.058494] xen_set_ioapic_routing: irq 5 gsi 5 vector 56 ioapic 0 pin 5 triggering 0 polarity 0 [ 0.058498] xen: registering gsi 6 triggering 1 polarity 0 [ 0.058501] xen: --> irq=6 [ 0.058503] xen_set_ioapic_routing: irq 6 gsi 6 vector 64 ioapic 0 pin 6 triggering 0 polarity 0 [ 0.058507] xen: registering gsi 7 triggering 1 polarity 0 [ 0.058509] xen: --> irq=7 [ 0.058511] xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7 triggering 0 polarity 0 [ 0.058515] xen: registering gsi 8 triggering 1 polarity 0 [ 0.058518] xen: --> irq=8 [ 0.058520] xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8 triggering 0 polarity 0 [ 0.058524] xen: registering gsi 9 triggering 0 polarity 0 [ 0.058527] xen: --> irq=9 [ 0.058529] xen_set_ioapic_routing: irq 9 gsi 9 vector 88 ioapic 0 pin 9 triggering 1 polarity 0 [ 0.058533] xen: registering gsi 10 triggering 1 polarity 0 [ 0.058536] xen: --> irq=10 [ 0.058538] xen_set_ioapic_routing: irq 10 gsi 10 vector 96 ioapic 0 pin 10 triggering 0 polarity 0 [ 0.058542] xen: registering gsi 11 triggering 1 polarity 0 [ 0.058545] xen: --> irq=11 [ 0.058547] xen_set_ioapic_routing: irq 11 gsi 11 vector 104 ioapic 0 pin 11 triggering 0 polarity 0 [ 0.058551] xen: registering gsi 12 triggering 1 polarity 0 [ 0.058554] xen: --> irq=12 [ 0.058556] xen_set_ioapic_routing: irq 12 gsi 12 vector 112 ioapic 0 pin 12 triggering 0 polarity 0 [ 0.058561] xen: registering gsi 13 triggering 1 polarity 0 [ 0.058563] xen: --> irq=13 [ 0.058565] xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13 triggering 0 polarity 0 [ 0.058570] xen: registering gsi 14 triggering 1 polarity 0 [ 0.058572] xen: --> irq=14 [ 0.058574] xen_set_ioapic_routing: irq 14 gsi 14 vector 136 ioapic 0 pin 14 triggering 0 polarity 0 [ 0.058579] xen: registering gsi 15 triggering 1 polarity 0 [ 0.058581] xen: --> irq=15 [ 0.058583] xen_set_ioapic_routing: irq 15 gsi 15 vector 144 ioapic 0 pin 15 triggering 0 polarity 0 [ 0.058595] Detected 2942.570 MHz processor. [ 0.061392] Console: colour VGA+ 80x25 [ 0.061394] console [tty0] enabled [ 0.067456] Xen: using vcpuop timer interface [ 0.067455] installing Xen timer for CPU 0 [ 0.067508] alloc irq_desc for 439 on node 0 [ 0.067510] alloc kstat_irqs on node 0 [ 0.067524] xen: vcpu_time_info placement not supported [ 0.067572] Calibrating delay loop (skipped), value calculated using timer frequency.. 5885.14 BogoMIPS (lpj=11770280) [ 0.067697] Security Framework initialized [ 0.067745] SELinux: Disabled at boot. [ 0.067795] Mount-cache hash table entries: 256 [ 0.067954] Initializing cgroup subsys ns [ 0.068001] Initializing cgroup subsys cpuacct [ 0.068049] Initializing cgroup subsys devices [ 0.068096] Initializing cgroup subsys freezer [ 0.068141] Initializing cgroup subsys net_cls [ 0.068210] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.068271] CPU: L2 cache: 256K [ 0.068314] CPU: L3 cache: 4096K [ 0.068360] CPU: Unsupported number of siblings 16 [ 0.068391] mce: CPU supports 9 MCE banks [ 0.068508] SMP alternatives: switching to UP code [ 0.086735] ACPI: Core revision 20090521 [ 0.127418] alloc irq_desc for 438 on node 0 [ 0.127421] alloc kstat_irqs on node 0 [ 0.127426] alloc irq_desc for 437 on node 0 [ 0.127428] alloc kstat_irqs on node 0 [ 0.127434] alloc irq_desc for 436 on node 0 [ 0.127435] alloc kstat_irqs on node 0 [ 0.127439] alloc irq_desc for 435 on node 0 [ 0.127441] alloc kstat_irqs on node 0 [ 0.127573] installing Xen timer for CPU 1 [ 0.127623] alloc irq_desc for 434 on node 0 [ 0.127624] alloc kstat_irqs on node 0 [ 0.127647] SMP alternatives: switching to SMP code [ 0.145149] alloc irq_desc for 433 on node 0 [ 0.145151] alloc kstat_irqs on node 0 [ 0.145164] alloc irq_desc for 432 on node 0 [ 0.145166] alloc kstat_irqs on node 0 [ 0.145172] alloc irq_desc for 431 on node 0 [ 0.145174] alloc kstat_irqs on node 0 [ 0.145178] alloc irq_desc for 430 on node 0 [ 0.145179] alloc kstat_irqs on node 0 [ 0.000000] Initializing CPU#1 [ 0.000002] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000004] CPU: L2 cache: 256K [ 0.000005] CPU: L3 cache: 4096K [ 0.000008] CPU: Unsupported number of siblings 16 [ 0.000012] mce: CPU supports 9 MCE banks [ 0.145316] installing Xen timer for CPU 2 [ 0.145627] alloc irq_desc for 429 on node 0 [ 0.145629] alloc kstat_irqs on node 0 [ 0.145648] alloc irq_desc for 428 on node 0 [ 0.145650] alloc kstat_irqs on node 0 [ 0.145654] alloc irq_desc for 427 on node 0 [ 0.145656] alloc kstat_irqs on node 0 [ 0.145660] alloc irq_desc for 426 on node 0 [ 0.145661] alloc kstat_irqs on node 0 [ 0.145665] alloc irq_desc for 425 on node 0 [ 0.145667] alloc kstat_irqs on node 0 [ 0.000000] Initializing CPU#2 [ 0.000004] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000006] CPU: L2 cache: 256K [ 0.000008] CPU: L3 cache: 4096K [ 0.000012] CPU: Unsupported number of siblings 16 [ 0.000016] mce: CPU supports 9 MCE banks [ 0.145821] installing Xen timer for CPU 3 [ 0.146134] alloc irq_desc for 424 on node 0 [ 0.146135] alloc kstat_irqs on node 0 [ 0.146154] alloc irq_desc for 423 on node 0 [ 0.146155] alloc kstat_irqs on node 0 [ 0.146160] alloc irq_desc for 422 on node 0 [ 0.146162] alloc kstat_irqs on node 0 [ 0.146166] alloc irq_desc for 421 on node 0 [ 0.146168] alloc kstat_irqs on node 0 [ 0.146171] alloc irq_desc for 420 on node 0 [ 0.146173] alloc kstat_irqs on node 0 [ 0.000000] Initializing CPU#3 [ 0.000000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000000] CPU: L2 cache: 256K [ 0.000000] CPU: L3 cache: 4096K [ 0.000000] CPU: Unsupported number of siblings 16 [ 0.000001] mce: CPU supports 9 MCE banks [ 0.146245] Brought up 4 CPUs [ 0.146554] CPU0 attaching sched-domain: [ 0.146557] domain 0: span 0-3 level CPU [ 0.146559] groups: 0 1 2 3 [ 0.146566] CPU1 attaching sched-domain: [ 0.146568] domain 0: span 0-3 level CPU [ 0.146570] groups: 1 2 3 0 [ 0.146576] CPU2 attaching sched-domain: [ 0.146578] domain 0: span 0-3 level CPU [ 0.146580] groups: 2 3 0 1 [ 0.146585] CPU3 attaching sched-domain: [ 0.146587] domain 0: span 0-3 level CPU [ 0.146589] groups: 3 0 1 2 [ 0.146902] Booting paravirtualized kernel on Xen [ 0.146951] Xen version: 3.4.2 (preserve-AD) (dom0) [ 0.147125] Grant tables using version 1 layout. [ 0.147181] Grant table initialized [ 0.147225] regulator: core version 0.5 [ 0.147313] NET: Registered protocol family 16 [ 0.149489] alloc irq_desc for 419 on node 0 [ 0.149491] alloc kstat_irqs on node 0 [ 0.149534] xenbus_probe_init ok [ 0.149621] ACPI: bus type pci registered [ 0.149734] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.149787] PCI: Not using MMCONFIG. [ 0.149831] PCI: Using configuration type 1 for base access [ 0.150291] bio: create slab at 0 [ 0.151814] ACPI: EC: Look up EC in DSDT [ 0.177291] ACPI: Interpreter enabled [ 0.177339] ACPI: (supports S0 S1 S3 S4 S5) [ 0.177484] ACPI: Using IOAPIC for interrupt routing [ 0.177600] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.180786] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.213386] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.224935] ACPI Warning: Incorrect checksum in table [OEMB] - 59, should be 58 20090521 tbutils-246 [ 0.225972] ACPI: No dock devices found. [ 0.226440] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.226629] pci 0000:00:02.0: reg 10 64bit mmio: [0xfb800000-0xfbbfffff] [ 0.226641] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.226648] pci 0000:00:02.0: reg 20 io port: [0xcc00-0xcc07] [ 0.226784] pci 0000:00:16.0: reg 10 64bit mmio: [0xfbdfb000-0xfbdfb00f] [ 0.226857] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.226913] pci 0000:00:16.0: PME# disabled [ 0.227046] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfbdfa000-0xfbdfa3ff] [ 0.227128] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.227183] pci 0000:00:1a.0: PME# disabled [ 0.227290] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbdf4000-0xfbdf7fff] [ 0.227358] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.227415] pci 0000:00:1b.0: PME# disabled [ 0.227551] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.227605] pci 0000:00:1c.0: PME# disabled [ 0.227744] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.227799] pci 0000:00:1c.2: PME# disabled [ 0.227935] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.227989] pci 0000:00:1c.3: PME# disabled [ 0.228125] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.228179] pci 0000:00:1c.4: PME# disabled [ 0.228314] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.228368] pci 0000:00:1c.5: PME# disabled [ 0.228492] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfbdf9000-0xfbdf93ff] [ 0.228573] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.228627] pci 0000:00:1d.0: PME# disabled [ 0.228923] pci 0000:00:1f.2: reg 10 io port: [0xb880-0xb887] [ 0.228932] pci 0000:00:1f.2: reg 14 io port: [0xb800-0xb803] [ 0.228940] pci 0000:00:1f.2: reg 18 io port: [0xb480-0xb487] [ 0.228948] pci 0000:00:1f.2: reg 1c io port: [0xb400-0xb403] [ 0.228956] pci 0000:00:1f.2: reg 20 io port: [0xb080-0xb08f] [ 0.228964] pci 0000:00:1f.2: reg 24 io port: [0xb000-0xb00f] [ 0.229036] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfbdf8000-0xfbdf80ff] [ 0.229057] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.229125] pci 0000:00:1f.5: reg 10 io port: [0xc880-0xc887] [ 0.229133] pci 0000:00:1f.5: reg 14 io port: [0xc800-0xc803] [ 0.229141] pci 0000:00:1f.5: reg 18 io port: [0xc480-0xc487] [ 0.229149] pci 0000:00:1f.5: reg 1c io port: [0xc400-0xc403] [ 0.229157] pci 0000:00:1f.5: reg 20 io port: [0xc080-0xc08f] [ 0.229165] pci 0000:00:1f.5: reg 24 io port: [0xc000-0xc00f] [ 0.229287] pci 0000:05:00.0: reg 10 io port: [0xec00-0xec07] [ 0.229299] pci 0000:05:00.0: reg 14 io port: [0xe880-0xe883] [ 0.229311] pci 0000:05:00.0: reg 18 io port: [0xe800-0xe807] [ 0.229322] pci 0000:05:00.0: reg 1c io port: [0xe480-0xe483] [ 0.229334] pci 0000:05:00.0: reg 20 io port: [0xe400-0xe40f] [ 0.229467] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff] [ 0.229680] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff] [ 0.229708] pci 0000:02:00.0: reg 18 64bit mmio: [0xfafff000-0xfaffffff] [ 0.229727] pci 0000:02:00.0: reg 20 64bit mmio: [0xfaff8000-0xfaffbfff] [ 0.229737] pci 0000:02:00.0: reg 30 32bit mmio: [0xfbee0000-0xfbeeffff] [ 0.229792] pci 0000:02:00.0: supports D1 D2 [ 0.229794] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.229850] pci 0000:02:00.0: PME# disabled [ 0.229979] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] [ 0.229984] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.229992] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff] [ 0.230142] pci 0000:00:1e.0: transparent bridge [ 0.230241] pci_bus 0000:00: on NUMA node 0 [ 0.230247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.230553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] [ 0.230699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT] [ 0.230771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR23._PRT] [ 0.230865] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] [ 0.230945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT] [ 0.231016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT] [ 0.251899] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.252246] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.252467] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.252806] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.253146] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.253536] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.253875] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.254201] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.254480] sync cpu 0 get result ffffffff max_id 0 [ 0.254482] Failed to sync pcpu 0 [ 0.254537] xenbus_probe_backend_init bus registered ok [ 0.254592] xenbus_probe_frontend_init bus registered ok [ 0.254641] xen_balloon: Initialising balloon driver with page order 0. [ 0.254780] PCI: Using ACPI for IRQ routing [ 0.254908] IO APIC resources couldn't be allocated. [ 0.270520] Switched to high resolution mode on CPU 0 [ 0.128192] Switched to high resolution mode on CPU 1 [ 0.128164] Switched to high resolution mode on CPU 2 [ 0.128207] Switched to high resolution mode on CPU 3 [ 0.274537] pnp: PnP ACPI init [ 0.274592] ACPI: bus type pnp registered [ 0.274988] xen: registering gsi 8 triggering 1 polarity 0 [ 0.274990] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.275040] xen: --> irq=8 [ 0.275043] xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8 triggering 0 polarity 0 [ 0.275188] xen: registering gsi 13 triggering 1 polarity 0 [ 0.275190] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.275238] xen: --> irq=13 [ 0.275241] xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13 triggering 0 polarity 0 [ 0.276965] xen: registering gsi 4 triggering 1 polarity 0 [ 0.276967] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.277016] xen: --> irq=4 [ 0.277018] xen_set_ioapic_routing: irq 4 gsi 4 vector 48 ioapic 0 pin 4 triggering 0 polarity 0 [ 0.277445] xen: registering gsi 1 triggering 1 polarity 0 [ 0.277447] xen_allocate_pirq: returning irq 1 for gsi 1 [ 0.277498] xen: --> irq=1 [ 0.277500] xen_set_ioapic_routing: irq 1 gsi 1 vector 32 ioapic 0 pin 1 triggering 0 polarity 0 [ 0.278516] pnp: PnP ACPI: found 14 devices [ 0.278564] ACPI: ACPI bus type pnp unregistered [ 0.278620] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved [ 0.278675] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved [ 0.278730] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved [ 0.278784] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.278841] system 00:06: ioport range 0x290-0x29f has been reserved [ 0.278897] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.278950] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.279001] system 00:07: ioport range 0x500-0x57f has been reserved [ 0.279056] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.279112] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.279167] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved [ 0.279224] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.279279] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.279336] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.279393] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.279446] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 0.279500] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.279554] system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved [ 0.279628] system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.284535] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05 [ 0.284587] pci 0000:00:1c.0: IO window: 0xe000-0xefff [ 0.284639] pci 0000:00:1c.0: MEM window: disabled [ 0.284689] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.284741] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.284792] pci 0000:00:1c.2: IO window: disabled [ 0.284844] pci 0000:00:1c.2: MEM window: disabled [ 0.284895] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.284947] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03 [ 0.284998] pci 0000:00:1c.3: IO window: disabled [ 0.285050] pci 0000:00:1c.3: MEM window: disabled [ 0.285100] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.285153] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02 [ 0.285206] pci 0000:00:1c.4: IO window: 0xd000-0xdfff [ 0.285258] pci 0000:00:1c.4: MEM window: 0xfbe00000-0xfbefffff [ 0.285313] pci 0000:00:1c.4: PREFETCH window: 0x000000faf00000-0x000000faffffff [ 0.285394] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:01 [ 0.285445] pci 0000:00:1c.5: IO window: disabled [ 0.285496] pci 0000:00:1c.5: MEM window: disabled [ 0.285548] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.285601] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 [ 0.285651] pci 0000:00:1e.0: IO window: disabled [ 0.285703] pci 0000:00:1e.0: MEM window: disabled [ 0.285754] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.285815] xen: registering gsi 17 triggering 0 polarity 1 [ 0.285819] alloc irq_desc for 17 on node 0 [ 0.285821] alloc kstat_irqs on node 0 [ 0.285826] xen: --> irq=17 [ 0.285829] xen_set_ioapic_routing: irq 17 gsi 17 vector 152 ioapic 0 pin 17 triggering 1 polarity 1 [ 0.285911] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.285968] pci 0000:00:1c.0: setting latency timer to 64 [ 0.285977] xen: registering gsi 18 triggering 0 polarity 1 [ 0.285981] alloc irq_desc for 18 on node 0 [ 0.285983] alloc kstat_irqs on node 0 [ 0.285986] xen: --> irq=18 [ 0.285988] xen_set_ioapic_routing: irq 18 gsi 18 vector 160 ioapic 0 pin 18 triggering 1 polarity 1 [ 0.286069] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.286124] pci 0000:00:1c.2: setting latency timer to 64 [ 0.286133] xen: registering gsi 19 triggering 0 polarity 1 [ 0.286136] alloc irq_desc for 19 on node 0 [ 0.286138] alloc kstat_irqs on node 0 [ 0.286140] xen: --> irq=19 [ 0.286142] xen_set_ioapic_routing: irq 19 gsi 19 vector 168 ioapic 0 pin 19 triggering 1 polarity 1 [ 0.286225] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.286280] pci 0000:00:1c.3: setting latency timer to 64 [ 0.286289] xen: registering gsi 17 triggering 0 polarity 1 [ 0.286291] xen_allocate_pirq: returning irq 17 for gsi 17 [ 0.286339] xen: --> irq=17 [ 0.286341] xen_set_ioapic_routing: irq 17 gsi 17 vector 152 ioapic 0 pin 17 triggering 1 polarity 1 [ 0.286421] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.286477] pci 0000:00:1c.4: setting latency timer to 64 [ 0.286486] xen: registering gsi 16 triggering 0 polarity 1 [ 0.286488] alloc irq_desc for 16 on node 0 [ 0.286490] alloc kstat_irqs on node 0 [ 0.286493] xen: --> irq=16 [ 0.286495] xen_set_ioapic_routing: irq 16 gsi 16 vector 176 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.286578] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.286633] pci 0000:00:1c.5: setting latency timer to 64 [ 0.286641] pci 0000:00:1e.0: setting latency timer to 64 [ 0.286645] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.286648] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.286650] pci_bus 0000:05: resource 0 io: [0xe000-0xefff] [ 0.286652] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.286654] pci_bus 0000:02: resource 1 mem: [0xfbe00000-0xfbefffff] [ 0.286656] pci_bus 0000:02: resource 2 pref mem [0xfaf00000-0xfaffffff] [ 0.286659] pci_bus 0000:06: resource 3 io: [0x00-0xffff] [ 0.286661] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.286692] NET: Registered protocol family 2 [ 0.286802] IP route cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.287031] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.287366] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.287676] TCP: Hash tables configured (established 65536 bind 65536) [ 0.287730] TCP reno registered [ 0.287851] NET: Registered protocol family 1 [ 0.287947] Unpacking initramfs... [ 0.307728] Freeing initrd memory: 27925k freed [ 0.313529] kvm: no hardware support [ 0.313587] has_svm: not amd [ 0.313631] kvm: no hardware support [ 0.314146] audit: initializing netlink socket (disabled) [ 0.314210] type=2000 audit(1265800339.496:1): initialized [ 0.314506] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.315684] VFS: Disk quotas dquot_6.5.2 [ 0.315774] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.315896] msgmni has been set to 860 [ 0.170566] alg: No test for stdrng (krng) [ 0.316222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.316301] io scheduler noop registered [ 0.316347] io scheduler anticipatory registered [ 0.316395] io scheduler deadline registered [ 0.316446] io scheduler cfq registered (default) [ 0.316505] pci 0000:00:02.0: Boot video device [ 0.316683] alloc irq_desc for 418 on node 0 [ 0.316685] alloc kstat_irqs on node 0 [ 0.316719] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.316868] alloc irq_desc for 417 on node 0 [ 0.316870] alloc kstat_irqs on node 0 [ 0.316894] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.317041] alloc irq_desc for 416 on node 0 [ 0.317043] alloc kstat_irqs on node 0 [ 0.317066] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.317214] alloc irq_desc for 415 on node 0 [ 0.317216] alloc kstat_irqs on node 0 [ 0.317240] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.317392] alloc irq_desc for 414 on node 0 [ 0.317394] alloc kstat_irqs on node 0 [ 0.317418] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.317579] Event-channel device installed. [ 0.319288] registering netback [ 0.320358] alloc irq_desc for 413 on node 0 [ 0.320361] alloc kstat_irqs on node 0 [ 0.320628] hpet_acpi_add: no address or irqs in _CRS [ 0.320699] Linux agpgart interface v0.103 [ 0.320745] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.320917] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.321239] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.321414] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.321540] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.321590] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.322050] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.322143] mice: PS/2 mouse device common for all mice [ 0.322226] rtc_cmos 00:03: RTC can wake from S4 [ 0.322298] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.322681] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.322743] cpuidle: using governor ladder [ 0.322789] cpuidle: using governor menu [ 0.322838] No iBFT detected. [ 0.323096] TCP cubic registered [ 0.323226] NET: Registered protocol family 10 [ 0.323593] lo: Disabled Privacy Extensions [ 0.323820] Mobile IPv6 [ 0.325928] NET: Registered protocol family 17 [ 0.326013] Bridge firewalling registered [ 0.326128] registered taskstats version 1 [ 0.326311] rtc_cmos 00:03: setting system clock to 2010-02-10 11:12:18 UTC (1265800338) [ 0.326485] Freeing unused kernel memory: 484k freed [ 0.326630] Write protecting the kernel read-only data: 4856k [ 0.342106] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.461008] agpgart-intel 0000:00:00.0: Intel IGDNG/D Chipset [ 0.462506] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 0.470178] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.362032] usbcore: registered new interface driver usbfs [ 0.362143] usbcore: registered new interface driver hub [ 0.362274] usbcore: registered new device driver usb [ 0.373018] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.373103] xen: registering gsi 16 triggering 0 polarity 1 [ 0.373106] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.373166] xen: --> irq=16 [ 0.373170] xen_set_ioapic_routing: irq 16 gsi 16 vector 176 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.373257] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.373372] r8169 0000:02:00.0: setting latency timer to 64 [ 0.373443] alloc irq_desc for 412 on node 0 [ 0.373447] alloc kstat_irqs on node 0 [ 0.374113] eth0: RTL8168d/8111d at 0xffffc900000cc000, e0:cb:4e:d3:bd:bc, XID 283000c0 IRQ 412 [ 0.380577] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.380671] xen: registering gsi 16 triggering 0 polarity 1 [ 0.380675] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.380730] xen: --> irq=16 [ 0.380734] xen_set_ioapic_routing: irq 16 gsi 16 vector 176 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.380830] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.380915] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.380921] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.381004] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.385092] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.385153] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 0.385182] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbdfa000 [ 0.389503] Uniform Multi-Platform E-IDE driver [ 0.401781] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.401880] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.401935] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.402010] usb usb1: Product: EHCI Host Controller [ 0.402057] usb usb1: Manufacturer: Linux 2.6.31.6-pvops-dom0 ehci_hcd [ 0.402109] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.402217] usb usb1: configuration #1 chosen from 1 choice [ 0.402294] hub 1-0:1.0: USB hub found [ 0.402359] hub 1-0:1.0: 2 ports detected [ 0.402493] xen: registering gsi 23 triggering 0 polarity 1 [ 0.402500] alloc irq_desc for 23 on node 0 [ 0.402502] alloc kstat_irqs on node 0 [ 0.402508] xen: --> irq=23 [ 0.402510] xen_set_ioapic_routing: irq 23 gsi 23 vector 41 ioapic 0 pin 23 triggering 1 polarity 1 [ 0.402594] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.402668] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.402672] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.402728] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.406726] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.406785] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 0.406805] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbdf9000 [ 0.421773] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.421860] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.421913] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.421988] usb usb2: Product: EHCI Host Controller [ 0.422036] usb usb2: Manufacturer: Linux 2.6.31.6-pvops-dom0 ehci_hcd [ 0.422089] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.422178] usb usb2: configuration #1 chosen from 1 choice [ 0.422249] hub 2-0:1.0: USB hub found [ 0.422309] hub 2-0:1.0: 2 ports detected [ 0.432995] SCSI subsystem initialized [ 0.443088] libata version 3.00 loaded. [ 0.444900] ata_piix 0000:00:1f.2: version 2.13 [ 0.444921] xen: registering gsi 21 triggering 0 polarity 1 [ 0.444926] alloc irq_desc for 21 on node 0 [ 0.444928] alloc kstat_irqs on node 0 [ 0.444933] xen: --> irq=21 [ 0.444937] xen_set_ioapic_routing: irq 21 gsi 21 vector 49 ioapic 0 pin 21 triggering 1 polarity 1 [ 0.445025] ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 0.445084] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.445250] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.445441] scsi0 : ata_piix [ 0.445571] scsi1 : ata_piix [ 0.448215] ata1: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb080 irq 21 [ 0.448274] ata2: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xb088 irq 21 [ 0.448350] xen: registering gsi 21 triggering 0 polarity 1 [ 0.448353] xen_allocate_pirq: returning irq 21 for gsi 21 [ 0.448410] xen: --> irq=21 [ 0.448413] xen_set_ioapic_routing: irq 21 gsi 21 vector 49 ioapic 0 pin 21 triggering 1 polarity 1 [ 0.448510] ata_piix 0000:00:1f.5: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 0.448567] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.448719] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.448791] scsi2 : ata_piix [ 0.448903] scsi3 : ata_piix [ 0.450750] ata3: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 21 [ 0.450807] ata4: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 21 [ 0.492420] xen: registering gsi 16 triggering 0 polarity 1 [ 0.492423] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.492473] xen: --> irq=16 [ 0.492476] xen_set_ioapic_routing: irq 16 gsi 16 vector 176 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.492562] pata_jmicron 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.492661] pata_jmicron 0000:05:00.0: setting latency timer to 64 [ 0.492764] scsi4 : pata_jmicron [ 0.492884] scsi5 : pata_jmicron [ 0.493671] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16 [ 0.493728] ata6: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16 [ 0.857928] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.780754] ata4: SATA link down (SStatus 0 SControl 300) [ 0.791936] ata3: SATA link down (SStatus 0 SControl 300) [ 0.990213] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 0.990282] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.990381] usb 1-1: configuration #1 chosen from 1 choice [ 0.990601] hub 1-1:1.0: USB hub found [ 0.990697] hub 1-1:1.0: 6 ports detected [ 0.938238] ata5.00: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-116 0122, E1.22, max UDMA/66 [ 0.953734] ata5.00: configured for UDMA/66 [ 1.102437] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.234275] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 1.234341] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.234428] usb 2-1: configuration #1 chosen from 1 choice [ 1.234534] hub 2-1:1.0: USB hub found [ 1.234636] hub 2-1:1.0: 8 ports detected [ 1.389897] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.245222] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.245241] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.390063] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.406838] ata2.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133 [ 1.406905] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.423997] ata1.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133 [ 1.424065] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.441849] ata2.01: ATA-7: WDC WD5000AAKS-07TMA0, 12.01C01, max UDMA/133 [ 1.441913] ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.450907] ata2.00: configured for UDMA/133 [ 1.462550] ata1.01: HPA detected: current 312579695, native 312581808 [ 1.462615] ata1.01: ATA-7: WDC WD1600AAJS-08PSA0, 05.06H05, max UDMA/133 [ 1.462663] ata1.01: 312579695 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.466608] ata2.01: configured for UDMA/133 [ 1.474693] ata1.00: configured for UDMA/133 [ 1.482577] ata1.01: configured for UDMA/133 [ 1.338054] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 1.338251] scsi 0:0:1:0: Direct-Access ATA WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5 [ 1.337579] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5 [ 1.337777] scsi 1:0:1:0: Direct-Access ATA WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5 [ 1.484884] scsi 4:0:0:0: CD-ROM PIONEER DVD-ROM DVD-116 1.22 PQ: 0 ANSI: 5 [ 1.505835] usb 2-1.6: new low speed USB device using ehci_hcd and address 3 [ 1.602936] usb 2-1.6: New USB device found, idVendor=045e, idProduct=0040 [ 1.603006] usb 2-1.6: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 1.603072] usb 2-1.6: Product: Microsoft 3-Button Mouse with IntelliEye(TM) [ 1.603120] usb 2-1.6: Manufacturer: Microsoft [ 1.603206] usb 2-1.6: configuration #1 chosen from 1 choice [ 1.496452] usbcore: registered new interface driver hiddev [ 1.500213] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input2 [ 1.500362] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.6/input0 [ 1.500482] usbcore: registered new interface driver usbhid [ 1.500532] usbhid: v2.6:USB HID core driver [ 1.504162] sd 0:0:1:0: [sdb] 312579695 512-byte logical blocks: (160 GB/149 GiB) [ 1.504650] sd 1:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.505153] sd 1:0:1:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.505255] sd 1:0:1:0: [sdd] Write Protect is off [ 1.505258] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.505299] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.650033] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.650150] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray [ 1.505101] sd 1:0:0:0: [sdc] Write Protect is off [ 1.505539] sdd: [ 1.505105] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.505151] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.504832] sd 0:0:1:0: [sdb] Write Protect is off [ 1.504836] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.504885] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.650489] Uniform CD-ROM driver Revision: 3.20 [ 1.650630] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.650682] sd 0:0:0:0: [sda] Write Protect is off [ 1.650732] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.650778] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.651048] sda: sda1 sda2 [ 1.508299] sdb: sdb1 [ 1.658951] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.513444] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.514757] sdd1 sdd2 [ 1.536654] sdc: [ 2.089672] sd 1:0:1:0: [sdd] Attached SCSI disk [ 2.092186] unknown partition table [ 2.092477] sd 1:0:0:0: [sdc] Attached SCSI disk [ 1.952371] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.952477] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.952920] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 1.953210] sd 1:0:1:0: Attached scsi generic sg3 type 0 [ 1.953491] sr 4:0:0:0: Attached scsi generic sg4 type 5 [ 2.354908] md: raid1 personality registered for level 1 [ 2.367175] md: md0 stopped. [ 2.369126] md: bind [ 2.371239] raid1: raid set md0 active with 1 out of 2 mirrors [ 2.371319] md0: detected capacity change from 0 to 509804544 [ 2.227514] md0: unknown partition table [ 2.394155] md: md1 stopped. [ 2.395824] md: bind [ 2.397786] raid1: raid set md1 active with 1 out of 2 mirrors [ 2.397864] md1: detected capacity change from 0 to 489601499136 [ 2.254265] md1: unknown partition table [ 2.262087] device-mapper: uevent: version 1.0.3 [ 2.262259] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 2.451039] PM: Starting manual resume from disk [ 2.611235] EXT3-fs: INFO: recovery required on readonly filesystem. [ 2.611290] EXT3-fs: write access will be enabled during recovery. [ 2.606262] kjournald starting. Commit interval 5 seconds [ 2.750375] EXT3-fs: recovery complete. [ 2.751041] EXT3-fs: mounted filesystem with ordered data mode. [ 4.357519] udev: starting version 150 [ 5.233560] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 5.233640] ACPI: Power Button [PWRF] [ 5.233745] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 5.233824] ACPI: Power Button [PWRB] [ 5.820777] xen: registering gsi 18 triggering 0 polarity 1 [ 5.820781] xen_allocate_pirq: returning irq 18 for gsi 18 [ 5.820831] xen: --> irq=18 [ 5.820834] xen_set_ioapic_routing: irq 18 gsi 18 vector 160 ioapic 0 pin 18 triggering 1 polarity 1 [ 5.820915] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.820989] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] [ 5.821070] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.840231] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 6.045975] ACPI: SSDT 00000000cdc8a0f0 01238 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 6.047388] ACPI: SSDT 00000000cdc8b330 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 6.048130] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 6.048957] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 6.049774] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 6.050629] ACPI: CPU-1 (power states: C1[C1] C2[C2]) [ 6.305151] xen: registering gsi 22 triggering 0 polarity 1 [ 6.305159] alloc irq_desc for 22 on node 0 [ 6.305162] alloc kstat_irqs on node 0 [ 6.305169] xen: --> irq=22 [ 6.305172] xen_set_ioapic_routing: irq 22 gsi 22 vector 57 ioapic 0 pin 22 triggering 1 polarity 1 [ 6.305261] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.305375] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.410420] hda_codec: Unknown model for ALC889, trying auto-probe from BIOS... [ 6.410718] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 7.244955] EXT3 FS on dm-0, internal journal [ 7.540352] loop: module loaded [ 9.135166] fuse init (API version 7.12) [ 9.054876] kjournald starting. Commit interval 5 seconds [ 9.206018] EXT3 FS on md0, internal journal [ 9.206114] EXT3-fs: mounted filesystem with ordered data mode. [ 9.095587] kjournald starting. Commit interval 5 seconds [ 9.237404] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 9.237756] EXT3 FS on sdb1, internal journal [ 9.237843] EXT3-fs: mounted filesystem with ordered data mode. [ 9.140544] kjournald starting. Commit interval 5 seconds [ 9.282257] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 9.282675] EXT3 FS on sdd1, internal journal [ 9.282759] EXT3-fs: mounted filesystem with ordered data mode. [ 9.313549] Adding 4194296k swap on /dev/mapper/vg00-swap. Priority:-1 extents:1 across:4194296k [ 9.887559] r8169: eth0: link up [ 10.034029] r8169: eth0: link up [ 16.774387] r8169: peth0: link up [ 16.790997] device peth0 entered promiscuous mode [ 16.805671] eth0: port 1(peth0) entering forwarding state [ 17.520976] alloc irq_desc for 411 on node 0 [ 17.520979] alloc kstat_irqs on node 0 [ 17.521019] alloc irq_desc for 410 on node 0 [ 17.521021] alloc kstat_irqs on node 0 [ 17.657085] xenbus_probe wake_waiting [ 17.657097] xenbus_probe wake_waiting [ 17.665050] XENBUS: Unable to read cpu state [ 17.665239] XENBUS: Unable to read cpu state [ 17.665379] XENBUS: Unable to read cpu state [ 17.665513] XENBUS: Unable to read cpu state [ 17.665732] xenbus_probe_devices backend [ 17.665855] xenbus_probe_devices failed xenbus_directory [ 17.665910] backend_probe_and_watch devices probed ok [ 17.666036] backend_probe_and_watch watch add ok ok [ 17.666129] backend_probe_and_watch all done [ 17.666184] xenbus_probe_devices device [ 17.666305] xenbus_probe_devices failed xenbus_directory [ 17.666361] frontend_probe_and_watch devices probed ok [ 17.666535] frontend_probe_and_watch watch add ok ok [ 17.666590] frontend_probe_and_watch all done [ 20.570025] Bluetooth: Core ver 2.15 [ 20.570185] NET: Registered protocol family 31 [ 20.570257] Bluetooth: HCI device and connection manager initialized [ 20.570310] Bluetooth: HCI socket layer initialized [ 20.600598] Bluetooth: L2CAP ver 2.13 [ 20.600657] Bluetooth: L2CAP socket layer initialized [ 20.483484] Bluetooth: RFCOMM TTY layer initialized [ 20.483536] Bluetooth: RFCOMM socket layer initialized [ 20.483585] Bluetooth: RFCOMM ver 1.11 [ 20.562069] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.562123] Bluetooth: BNEP filters: protocol multicast [ 20.705131] Bluetooth: SCO (Voice Link) ver 0.6 [ 20.705208] Bluetooth: SCO socket layer initialized [ 22.301162] lp: driver loaded but no devices found [ 22.347487] ppdev: user-space parallel port driver [ 22.828824] [drm] Initialized drm 1.1.0 20060810 [ 22.888445] xen: registering gsi 16 triggering 0 polarity 1 [ 22.888449] xen_allocate_pirq: returning irq 16 for gsi 16 [ 22.888452] xen: --> irq=16 [ 22.888455] xen_set_ioapic_routing: irq 16 gsi 16 vector 176 ioapic 0 pin 16 triggering 1 polarity 1 [ 22.888470] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 22.888477] i915 0000:00:02.0: setting latency timer to 64 [ 22.928569] alloc irq_desc for 409 on node 0 [ 22.928572] alloc kstat_irqs on node 0 [ 22.930539] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C [ 22.977067] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-D [ 23.244091] i2c-adapter i2c-2: unable to read EDID block. [ 23.244097] i915 0000:00:02.0: DVI-D-2: no EDID data [ 23.261678] BUG: unable to handle kernel paging request at ffffc900000c6000 [ 23.261685] IP: [] intel_i915_chipset_flush+0x22/0x3e [intel_agp] [ 23.261694] PGD 33d2067 PUD 33d3067 PMD 33d4067 PTE 0 [ 23.261700] Oops: 0002 [#1] SMP [ 23.261703] last sysfs file: /sys/module/i2c_core/initstate [ 23.261705] CPU 0 [ 23.261707] Modules linked in: i915(+) drm i2c_algo_bit video output ppdev lp parport sco bnep rfcomm l2cap bluetooth rfkill battery cpufreq_stats cpufreq_userspace cpufreq_conservative cpufreq_powersave fuse hwmon_vid k8temp eeprom i2c_nforce2 firewire_sbp2 firewire_core crc_itu_t loop snd_hda_codec_intelhdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi processor snd_seq_midi_event evdev pcspkr i2c_i801 i2c_core asus_atk0110 snd_seq snd_timer button snd_seq_device acpi_processor snd soundcore snd_page_alloc ext3 jbd mbcache dm_mod raid1 md_mod sg sd_mod crc_t10dif sr_mod cdrom usbhid hid pata_jmicron ata_generic ata_piix libata scsi_mod ide_pci_generic ehci_hcd r8169 mii ide_core usbcore nls_base intel_agp thermal fan thermal_sys [last unloaded: scsi_wait_scan] [ 23.261775] Pid: 2379, comm: modprobe Not tainted 2.6.31.6-pvops-dom0 #7 System Product Name [ 23.261777] RIP: e030:[] [] intel_i915_chipset_flush+0x22/0x3e [intel_agp] [ 23.261783] RSP: e02b:ffff880002155a58 EFLAGS: 00010286 [ 23.261785] RAX: 0000000000000001 RBX: ffff88001e0f7300 RCX: 0000000000001000 [ 23.261787] RDX: ffffc900000c6000 RSI: 00000000000007e9 RDI: ffff88001d5efe00 [ 23.261789] RBP: ffff88001e96c000 R08: 0000000000000040 R09: ffff8800016f1000 [ 23.261792] R10: ffff880000000000 R11: 6db6db6db6db6db7 R12: 0000000000000001 [ 23.261794] R13: 00000000007e9000 R14: ffff88001e0f7f00 R15: 00000000007e9000 [ 23.261799] FS: 00007f1a00ddd6f0(0000) GS:ffffc90000000000(0000) knlGS:0000000000000000 [ 23.261801] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b [ 23.261803] CR2: ffffc900000c6000 CR3: 000000001dd65000 CR4: 0000000000002660 [ 23.261806] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.261808] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 23.261811] Process modprobe (pid: 2379, threadinfo ffff880002154000, task ffff8800198b8000) [ 23.261812] Stack: [ 23.261814] 0000000d00000000 000000007ea42086 000000007ea42086 ffffffffa03c387c [ 23.261818] <0> ffff88001e0f7f00 000000007ea42086 ffff88001e96c000 ffff88001e0f7300 [ 23.261823] <0> ffff88001e0f7f00 ffffffffa03c4fc3 ffff88001e0f7300 0000000000000000 [ 23.261828] Call Trace: [ 23.261840] [] ? i915_gem_object_flush_cpu_write_domain+0x30/0x53 [i915] [ 23.261849] [] ? i915_gem_object_set_to_gtt_domain+0x57/0x9d [i915] [ 23.261860] [] ? intelfb_create+0x1e5/0x7a3 [i915] [ 23.261866] [] ? xen_force_evtchn_callback+0x1d/0x37 [ 23.261877] [] ? intelfb_probe+0x3c6/0x62e [i915] [ 23.261881] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 23.261894] [] ? drm_helper_initial_config+0x176/0x19c [drm] [ 23.261902] [] ? i915_driver_load+0xaa7/0xb3c [i915] [ 23.261913] [] ? drm_get_dev+0x321/0x444 [drm] [ 23.261919] [] ? local_pci_probe+0x22/0x3e [ 23.261922] [] ? xen_force_evtchn_callback+0x1d/0x37 [ 23.261925] [] ? pci_device_probe+0x68/0xab [ 23.261930] [] ? driver_probe_device+0xa2/0x13a [ 23.261933] [] ? xen_restore_fl_direct_end+0x0/0x1 [ 23.261936] [] ? __driver_attach+0x63/0x9a [ 23.261939] [] ? __driver_attach+0x0/0x9a [ 23.261942] [] ? bus_for_each_dev+0x54/0x9d [ 23.261945] [] ? bus_add_driver+0xbc/0x218 [ 23.261948] [] ? driver_register+0xa3/0x122 [ 23.261951] [] ? __pci_register_driver+0x5e/0xe7 [ 23.261959] [] ? i915_init+0x0/0x74 [i915] [ 23.261962] [] ? do_one_initcall+0x77/0x1c1 [ 23.261966] [] ? sys_init_module+0xda/0x223 [ 23.261970] [] ? system_call_fastpath+0x16/0x1b [ 23.261972] Code: 86 51 06 e1 48 83 c4 18 c3 48 83 ec 18 48 8b 15 f1 80 00 00 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0 48 85 d2 74 04 b0 01 <89> 02 48 8b 44 24 10 65 48 33 04 25 28 00 00 00 74 05 e8 48 51 [ 23.262012] RIP [] intel_i915_chipset_flush+0x22/0x3e [intel_agp] [ 23.262017] RSP [ 23.262019] CR2: ffffc900000c6000 [ 23.262022] ---[ end trace cf5e2ee5497e2d52 ]--- [ 26.955198] eth0: no IPv6 routers present [ 27.230515] peth0: no IPv6 routers present