[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31.6 (root@xentest) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #2 SMP Sun Feb 14 05:18:49 CET 2010 [ 0.000000] Command line: root=/dev/sda1 ro earlyprintk=xen pciback.hide=(0000:00:02.0)(0000:00:02.1) reassigndev=0000:00:02.0,0000:00:02.1 reassign_resources [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] xen_release_chunk: looking at area pfn 20000-7cb70 [ 0.000000] xen_release_chunk: looking at area pfn 7cc00-fec00 [ 0.000000] xen_release_chunk: looking at area pfn fec01-fed00 [ 0.000000] xen_release_chunk: looking at area pfn fed15-fed20 [ 0.000000] xen_release_chunk: looking at area pfn fed40-fee00 [ 0.000000] xen_release_chunk: looking at area pfn fee01-ffe00 [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] Xen: 000000007cb70000 - 000000007cb7e000 (ACPI data) [ 0.000000] Xen: 000000007cb7e000 - 000000007cbd0000 (ACPI NVS) [ 0.000000] Xen: 000000007cbd0000 - 000000007cc00000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fed00000 - 00000000fed01100 (reserved) [ 0.000000] Xen: 00000000fed02000 - 00000000fed14c00 (reserved) [ 0.000000] Xen: 00000000fed20000 - 00000000fed40000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] console [xenboot0] enabled [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] modified: 000000007cb70000 - 000000007cb7e000 (ACPI data) [ 0.000000] modified: 000000007cb7e000 - 000000007cbd0000 (ACPI NVS) [ 0.000000] modified: 000000007cbd0000 - 000000007cc00000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed01100 (reserved) [ 0.000000] modified: 00000000fed02000 - 00000000fed14c00 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed40000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000 [ 0.000000] 0000000000 - 0020000000 page 4k [ 0.000000] kernel direct mapping tables up to 20000000 @ 100000-202000 [ 0.000000] RAMDISK: 01b4d000 - 021fca00 [ 0.000000] ACPI: RSDP 00000000000fb080 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 000000007cb70100 00064 (v01 A_M_I_ OEMXSDT 05000927 MSFT 00000097) [ 0.000000] ACPI: FACP 000000007cb70290 000F4 (v03 A_M_I_ OEMFACP 05000927 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000007cb70440 0841F (v01 A1065 A1065000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 000000007cb7e000 00040 [ 0.000000] ACPI: APIC 000000007cb70390 0006C (v01 A_M_I_ OEMAPIC 05000927 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000007cb70400 0003C (v01 A_M_I_ OEMMCFG 05000927 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000007cb7e040 00089 (v01 A_M_I_ AMI_OEM 05000927 MSFT 00000097) [ 0.000000] ACPI: HPET 000000007cb78860 00038 (v01 A_M_I_ OEMHPET 05000927 MSFT 00000097) [ 0.000000] ACPI: GSCI 000000007cb7e0d0 02024 (v01 A_M_I_ GMCHSCI 05000927 MSFT 00000097) [ 0.000000] ACPI: 000000007cb80100 00168 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: SSDT 000000007cb811e0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0020000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [00022fe000 - 0002313000] XEN PAGETABLES ==> [00022fe000 - 0002313000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001b2c134] TEXT DATA BSS ==> [0001000000 - 0001b2c134] [ 0.000000] #4 [0001b4d000 - 00021fca00] RAMDISK ==> [0001b4d000 - 00021fca00] [ 0.000000] #5 [00021fd000 - 00022fe000] XEN START INFO ==> [00021fd000 - 00022fe000] [ 0.000000] #6 [0001b2d000 - 0001b2d298] BRK ==> [0001b2d000 - 0001b2d298] [ 0.000000] #7 [0000100000 - 00001ea000] PGTABLE ==> [0000100000 - 00001ea000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] On node 0 totalpages: 130959 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 237 pages reserved [ 0.000000] DMA zone: 3690 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1736 pages used for memmap [ 0.000000] DMA32 zone: 125240 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7cc00000 (gap: 7cc00000:82000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Allocated 22 4k pages, static data 88160 bytes [ 0.000000] trying to map vcpu_info 0 at ffffc9000000b060, mfn 76327, offset 96 [ 0.000000] cpu 0 using vcpu_info at ffffc9000000b060 [ 0.000000] trying to map vcpu_info 1 at ffffc90000023060, mfn 7633d, offset 96 [ 0.000000] cpu 1 using vcpu_info at ffffc90000023060 [ 0.000000] trying to map vcpu_info 2 at ffffc9000003b060, mfn 76353, offset 96 [ 0.000000] cpu 2 using vcpu_info at ffffc9000003b060 [ 0.000000] trying to map vcpu_info 3 at ffffc90000053060, mfn 76369, offset 96 [ 0.000000] cpu 3 using vcpu_info at ffffc90000053060 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128930 [ 0.000000] Kernel command line: root=/dev/sda1 ro earlyprintk=xen pciback.hide=(0000:00:02.0)(0000:00:02.1) reassigndev=0000:00:02.0,0000:00:02.1 reassign_resources [ 0.000000] Unknown boot option `pciback.hide=(0000:00:02.0)(0000:00:02.1)': ignoring [ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] PCI-DMA: Using Xen software bounce buffering for IO (Xen-SWIOTLB) [ 0.000000] xen_swiotlb_fixup: buf=ffff880002e14000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880006e74000 size=32768 [ 0.000000] Placing 64MB Xen software IO TLB between ffff880002e14000 - ffff880006e14000 [ 0.000000] Xen software IO TLB at phys 0x2e14000 - 0x6e14000 [ 0.000000] Memory: 428676k/524288k available (5979k kernel code, 452k absent, 94676k reserved, 3796k data, 532k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] xen: registering gsi 0 triggering 1 polarity 0 [ 0.000000] xen: --> irq=0 [ 0.000000] xen_set_ioapic_routing: irq 0 gsi 0 vector 0 ioapic 0 pin 0 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 1 triggering 1 polarity 0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 3 triggering 1 polarity 0 [ 0.000000] xen: --> irq=3 [ 0.000000] xen_set_ioapic_routing: irq 3 gsi 3 vector 3 ioapic 0 pin 3 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 4 triggering 1 polarity 0 [ 0.000000] xen: --> irq=4 [ 0.000000] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 5 triggering 1 polarity 0 [ 0.000000] xen: --> irq=5 [ 0.000000] xen_set_ioapic_routing: irq 5 gsi 5 vector 5 ioapic 0 pin 5 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 6 triggering 1 polarity 0 [ 0.000000] xen: --> irq=6 [ 0.000000] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 7 triggering 1 polarity 0 [ 0.000000] xen: --> irq=7 [ 0.000000] xen_set_ioapic_routing: irq 7 gsi 7 vector 7 ioapic 0 pin 7 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 8 triggering 1 polarity 0 [ 0.000000] xen: --> irq=8 [ 0.000000] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 0 [ 0.000000] xen: --> irq=9 [ 0.000000] xen_set_ioapic_routing: irq 9 gsi 9 vector 9 ioapic 0 pin 9 triggering 1 polarity 0 [ 0.000000] xen: registering gsi 10 triggering 1 polarity 0 [ 0.000000] xen: --> irq=10 [ 0.000000] xen_set_ioapic_routing: irq 10 gsi 10 vector 10 ioapic 0 pin 10 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 11 triggering 1 polarity 0 [ 0.000000] xen: --> irq=11 [ 0.000000] xen_set_ioapic_routing: irq 11 gsi 11 vector 11 ioapic 0 pin 11 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 12 triggering 1 polarity 0 [ 0.000000] xen: --> irq=12 [ 0.000000] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 13 triggering 1 polarity 0 [ 0.000000] xen: --> irq=13 [ 0.000000] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 14 triggering 1 polarity 0 [ 0.000000] xen: --> irq=14 [ 0.000000] xen_set_ioapic_routing: irq 14 gsi 14 vector 14 ioapic 0 pin 14 triggering 0 polarity 0 [ 0.000000] xen: registering gsi 15 triggering 1 polarity 0 [ 0.000000] xen: --> irq=15 [ 0.000000] xen_set_ioapic_routing: irq 15 gsi 15 vector 15 ioapic 0 pin 15 triggering 0 polarity 0 [ 0.000000] Detected 2666.422 MHz processor. [ 0.000999] Console: colour VGA+ 80x25 [ 0.000999] console handover: boot [xenboot0] -> real [tty0] [ 0.000999] Xen: using vcpuop timer interface [ 0.000999] installing Xen timer for CPU 0 [ 0.000999] alloc irq_desc for 439 on node 0 [ 0.000999] alloc kstat_irqs on node 0 [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.84 BogoMIPS (lpj=2666422) [ 0.000999] Security Framework initialized [ 0.000999] SELinux: Initializing. [ 0.000999] SELinux: Starting in permissive mode [ 0.000999] Mount-cache hash table entries: 256 [ 0.000999] Initializing cgroup subsys ns [ 0.000999] Initializing cgroup subsys cpuacct [ 0.000999] Initializing cgroup subsys freezer [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000999] CPU: L2 cache: 3072K [ 0.000999] CPU: Physical Processor ID: 0 [ 0.000999] CPU: Processor Core ID: 0 [ 0.000999] mce: CPU supports 6 MCE banks [ 0.000999] Performance Counters: unsupported p6 CPU model 23 no PMU driver, software counters only. [ 0.000999] SMP alternatives: switching to UP code [ 0.002215] ACPI: Core revision 20090521 [ 0.016570] alloc irq_desc for 438 on node 0 [ 0.016573] alloc kstat_irqs on node 0 [ 0.016579] alloc irq_desc for 437 on node 0 [ 0.016581] alloc kstat_irqs on node 0 [ 0.016586] alloc irq_desc for 436 on node 0 [ 0.016588] alloc kstat_irqs on node 0 [ 0.016592] alloc irq_desc for 435 on node 0 [ 0.016595] alloc kstat_irqs on node 0 [ 0.016768] installing Xen timer for CPU 1 [ 0.016822] alloc irq_desc for 434 on node 0 [ 0.016825] alloc kstat_irqs on node 0 [ 0.016855] SMP alternatives: switching to SMP code [ 0.018997] alloc irq_desc for 433 on node 0 [ 0.018997] alloc kstat_irqs on node 0 [ 0.019003] alloc irq_desc for 432 on node 0 [ 0.019005] alloc kstat_irqs on node 0 [ 0.019011] alloc irq_desc for 431 on node 0 [ 0.019013] alloc kstat_irqs on node 0 [ 0.019017] alloc irq_desc for 430 on node 0 [ 0.019019] alloc kstat_irqs on node 0 [ 0.000008] Initializing CPU#1 [ 0.000045] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000048] CPU: L2 cache: 3072K [ 0.000051] CPU: Physical Processor ID: 0 [ 0.000052] CPU: Processor Core ID: 1 [ 0.000055] mce: CPU supports 6 MCE banks [ 0.019156] installing Xen timer for CPU 2 [ 0.019948] alloc irq_desc for 429 on node 0 [ 0.019950] alloc kstat_irqs on node 0 [ 0.019974] alloc irq_desc for 428 on node 0 [ 0.019976] alloc kstat_irqs on node 0 [ 0.019982] alloc irq_desc for 427 on node 0 [ 0.019984] alloc kstat_irqs on node 0 [ 0.019989] alloc irq_desc for 426 on node 0 [ 0.019991] alloc kstat_irqs on node 0 [ 0.019996] alloc irq_desc for 425 on node 0 [ 0.019996] alloc kstat_irqs on node 0 [ 0.000018] Initializing CPU#2 [ 0.000071] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000073] CPU: L2 cache: 3072K [ 0.000077] CPU: Physical Processor ID: 0 [ 0.000078] CPU: Processor Core ID: 2 [ 0.000081] mce: CPU supports 6 MCE banks [ 0.020187] installing Xen timer for CPU 3 [ 0.021001] alloc irq_desc for 424 on node 0 [ 0.021004] alloc kstat_irqs on node 0 [ 0.021036] alloc irq_desc for 423 on node 0 [ 0.021038] alloc kstat_irqs on node 0 [ 0.021044] alloc irq_desc for 422 on node 0 [ 0.021046] alloc kstat_irqs on node 0 [ 0.021052] alloc irq_desc for 421 on node 0 [ 0.021054] alloc kstat_irqs on node 0 [ 0.021058] alloc irq_desc for 420 on node 0 [ 0.021060] alloc kstat_irqs on node 0 [ 0.000008] Initializing CPU#3 [ 0.000044] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000046] CPU: L2 cache: 3072K [ 0.000049] CPU: Physical Processor ID: 0 [ 0.000051] CPU: Processor Core ID: 3 [ 0.000053] mce: CPU supports 6 MCE banks [ 0.021154] Brought up 4 CPUs [ 0.022175] Booting paravirtualized kernel on Xen [ 0.022249] Xen version: 4.0.0-rc3-pre (preserve-AD) (dom0) [ 0.023037] Grant tables using version 2 layout. [ 0.023274] Grant table initialized [ 0.023531] Time: 4:34:52 Date: 02/14/10 [ 0.023827] NET: Registered protocol family 16 [ 0.024050] alloc irq_desc for 419 on node 0 [ 0.024050] alloc kstat_irqs on node 0 [ 0.024050] xenbus_probe_init ok [ 0.025052] ACPI: bus type pci registered [ 0.025286] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.025286] PCI: Not using MMCONFIG. [ 0.025461] PCI: Using configuration type 1 for base access [ 0.045033] bio: create slab at 0 [ 0.047776] ACPI: EC: Look up EC in DSDT [ 0.064278] ACPI: Interpreter enabled [ 0.064517] ACPI: (supports S0 S1 S3 S4 S5) [ 0.064950] ACPI: Using IOAPIC for interrupt routing [ 0.065046] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.069004] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.119672] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.135141] ACPI Warning: Incorrect checksum in table [OEMB] - C5, should be BC 20090521 tbutils-246 [ 0.136436] ACPI Warning: Incorrect checksum in table [ ] - C8, should be 0C 20090521 tbutils-246 [ 0.137092] ACPI: No dock devices found. [ 0.137497] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.137772] PCI: Scanning bus 0000:00 [ 0.137772] pci 0000:00:00.0: found [8086:2e10] class 000600 header type 00 [ 0.137772] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x1b5 [ 0.137772] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.137772] pci 0000:00:02.0: found [8086:2e12] class 000380 header type 00 [ 0.137772] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff] [ 0.137772] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.137772] pci 0000:00:02.0: reg 20 io port: [0xcc00-0xcc07] [ 0.137772] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x1b5 [ 0.137772] pci 0000:00:02.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.137997] pci 0000:00:02.1: found [8086:2e13] class 000380 header type 00 [ 0.138025] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe900000-0xfe9fffff] [ 0.138080] pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x1b5 [ 0.138083] pci 0000:00:02.1: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.138158] pci 0000:00:03.0: found [8086:2e14] class 000780 header type 00 [ 0.138229] pci 0000:00:03.0: reg 10 64bit mmio: [0xfe8fb000-0xfe8fb00f] [ 0.138290] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x1b5 [ 0.138293] pci 0000:00:03.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.138338] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.138580] pci 0000:00:03.0: PME# disabled [ 0.138898] pci 0000:00:19.0: found [8086:10de] class 000200 header type 00 [ 0.138949] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe8c0000-0xfe8dffff] [ 0.138960] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe8fa000-0xfe8fafff] [ 0.138970] pci 0000:00:19.0: reg 18 io port: [0xc880-0xc89f] [ 0.138978] pci 0000:00:19.0: calling quirk_resource_alignment+0x0/0x1b5 [ 0.138978] pci 0000:00:19.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.138978] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.138978] pci 0000:00:19.0: PME# disabled [ 0.138999] pci 0000:00:1a.0: found [8086:3a67] class 000c03 header type 00 [ 0.139087] pci 0000:00:1a.0: reg 20 io port: [0xc400-0xc41f] [ 0.139110] pci 0000:00:1a.0: calling quirk_resource_alignment+0x0/0x1b5 [ 0.139113] pci 0000:00:1a.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.139166] pci 0000:00:1a.1: found [8086:3a68] class 000c03 header type 00 [ 0.139240] pci 0000:00:1a.1: reg 20 io port: [0xc480-0xc49f] [ 0.139263] pci 0000:00:1a.1: calling quirk_resource_alignment+0x0/0x1b5 [ 0.139266] pci 0000:00:1a.1: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.139328] pci 0000:00:1a.2: found [8086:3a69] class 000c03 header type 00 [ 0.139396] pci 0000:00:1a.2: reg 20 io port: [0xc800-0xc81f] [ 0.139419] pci 0000:00:1a.2: calling quirk_resource_alignment+0x0/0x1b5 [ 0.139422] pci 0000:00:1a.2: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.139490] pci 0000:00:1a.7: found [8086:3a6c] class 000c03 header type 00 [ 0.139538] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe8f9000-0xfe8f93ff] [ 0.139607] pci 0000:00:1a.7: calling quirk_resource_alignment+0x0/0x1b5 [ 0.139610] pci 0000:00:1a.7: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.139665] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.139873] pci 0000:00:1a.7: PME# disabled [ 0.140009] pci 0000:00:1b.0: found [8086:3a6e] class 000403 header type 00 [ 0.140044] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe8f0000-0xfe8f3fff] [ 0.140096] pci 0000:00:1b.0: calling quirk_resource_alignment+0x0/0x1b5 [ 0.140099] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.140152] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.140368] pci 0000:00:1b.0: PME# disabled [ 0.140630] pci 0000:00:1c.0: found [8086:3a70] class 000604 header type 01 [ 0.140666] pci 0000:00:1c.0: calling quirk_resource_alignment+0x0/0x1b5 [ 0.140669] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.140717] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.140943] pci 0000:00:1c.0: PME# disabled [ 0.141004] pci 0000:00:1c.4: found [8086:3a78] class 000604 header type 01 [ 0.141053] pci 0000:00:1c.4: calling quirk_resource_alignment+0x0/0x1b5 [ 0.141056] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.141108] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.141348] pci 0000:00:1c.4: PME# disabled [ 0.141600] pci 0000:00:1d.0: found [8086:3a64] class 000c03 header type 00 [ 0.141674] pci 0000:00:1d.0: reg 20 io port: [0xbc00-0xbc1f] [ 0.141705] pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x1b5 [ 0.141708] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.141777] pci 0000:00:1d.1: found [8086:3a65] class 000c03 header type 00 [ 0.141845] pci 0000:00:1d.1: reg 20 io port: [0xc000-0xc01f] [ 0.141868] pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x1b5 [ 0.141871] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.141923] pci 0000:00:1d.2: found [8086:3a66] class 000c03 header type 00 [ 0.141978] pci 0000:00:1d.2: reg 20 io port: [0xc080-0xc09f] [ 0.142002] pci 0000:00:1d.2: calling quirk_resource_alignment+0x0/0x1b5 [ 0.142005] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.142085] pci 0000:00:1d.7: found [8086:3a6a] class 000c03 header type 00 [ 0.142140] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe8f8000-0xfe8f83ff] [ 0.142197] pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x1b5 [ 0.142200] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.142246] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.142491] pci 0000:00:1d.7: PME# disabled [ 0.142769] pci 0000:00:1e.0: found [8086:244e] class 000604 header type 01 [ 0.142819] pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x1b5 [ 0.142822] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.142874] pci 0000:00:1f.0: found [8086:3a14] class 000601 header type 00 [ 0.142970] pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x1b5 [ 0.142973] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.143003] pci 0000:00:1f.2: found [8086:3a00] class 000101 header type 00 [ 0.143051] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.143060] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.143070] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.143080] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.143090] pci 0000:00:1f.2: reg 20 io port: [0xff90-0xff9f] [ 0.143099] pci 0000:00:1f.2: reg 24 io port: [0xffa0-0xffaf] [ 0.143123] pci 0000:00:1f.2: calling quirk_resource_alignment+0x0/0x1b5 [ 0.143126] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.143179] pci 0000:00:1f.3: found [8086:3a60] class 000c05 header type 00 [ 0.143208] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe8ef000-0xfe8ef0ff] [ 0.143233] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.143255] pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x1b5 [ 0.143258] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.143301] pci 0000:00:1f.5: found [8086:3a06] class 000101 header type 00 [ 0.143345] pci 0000:00:1f.5: reg 10 io port: [0xb880-0xb887] [ 0.143355] pci 0000:00:1f.5: reg 14 io port: [0xb800-0xb803] [ 0.143365] pci 0000:00:1f.5: reg 18 io port: [0xb480-0xb487] [ 0.143387] pci 0000:00:1f.5: reg 1c io port: [0xb400-0xb403] [ 0.143397] pci 0000:00:1f.5: reg 20 io port: [0xb080-0xb08f] [ 0.143407] pci 0000:00:1f.5: reg 24 io port: [0xb000-0xb00f] [ 0.143423] pci 0000:00:1f.5: calling quirk_resource_alignment+0x0/0x1b5 [ 0.143426] pci 0000:00:1f.5: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.143481] PCI: Fixups for bus 0000:00 [ 0.143486] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 0 [ 0.143494] PCI: Scanning bus 0000:02 [ 0.143562] PCI: Fixups for bus 0000:02 [ 0.143580] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff] [ 0.143582] PCI: Bus scan for 0000:02 returning with max=02 [ 0.143589] pci 0000:00:1c.4: scanning behind bridge, config 010100, pass 0 [ 0.143597] PCI: Scanning bus 0000:01 [ 0.143627] pci 0000:01:00.0: found [11ab:6101] class 000101 header type 00 [ 0.143671] pci 0000:01:00.0: reg 10 io port: [0xdc00-0xdc07] [ 0.143684] pci 0000:01:00.0: reg 14 io port: [0xd880-0xd883] [ 0.143696] pci 0000:01:00.0: reg 18 io port: [0xd800-0xd807] [ 0.143717] pci 0000:01:00.0: reg 1c io port: [0xd480-0xd483] [ 0.143735] pci 0000:01:00.0: reg 20 io port: [0xd400-0xd40f] [ 0.143748] pci 0000:01:00.0: reg 24 32bit mmio: [0xfeaff000-0xfeaff1ff] [ 0.143769] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x1b5 [ 0.143824] pci 0000:01:00.0: supports D1 [ 0.143826] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [ 0.143978] pci 0000:01:00.0: PME# disabled [ 0.144066] PCI: Fixups for bus 0000:01 [ 0.144072] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] [ 0.144078] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.144088] PCI: Bus scan for 0000:01 returning with max=01 [ 0.144094] pci 0000:00:1e.0: scanning behind bridge, config 030300, pass 0 [ 0.144107] PCI: Scanning bus 0000:03 [ 0.144131] pci 0000:03:00.0: found [1039:6326] class 000300 header type 00 [ 0.144164] pci 0000:03:00.0: reg 10 32bit mmio: [0xfd800000-0xfdffffff] [ 0.144175] pci 0000:03:00.0: reg 14 32bit mmio: [0xfebf0000-0xfebfffff] [ 0.144193] pci 0000:03:00.0: reg 18 io port: [0xec00-0xec7f] [ 0.144229] pci 0000:03:00.0: reg 30 32bit mmio: [0xfebe0000-0xfebeffff] [ 0.144238] pci 0000:03:00.0: calling quirk_resource_alignment+0x0/0x1b5 [ 0.144265] pci 0000:03:00.0: supports D2 [ 0.144300] pci 0000:03:03.0: found [11c1:5811] class 000c00 header type 00 [ 0.144332] pci 0000:03:03.0: reg 10 32bit mmio: [0xfebdf000-0xfebdffff] [ 0.144402] pci 0000:03:03.0: calling quirk_resource_alignment+0x0/0x1b5 [ 0.144437] pci 0000:03:03.0: supports D1 D2 [ 0.144440] pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot [ 0.144660] pci 0000:03:03.0: PME# disabled [ 0.144962] PCI: Fixups for bus 0000:03 [ 0.144964] pci 0000:00:1e.0: transparent bridge [ 0.144977] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.144977] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.144977] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd800000-0xfdffffff] [ 0.144977] PCI: Bus scan for 0000:03 returning with max=03 [ 0.144977] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 1 [ 0.144977] pci 0000:00:1c.4: scanning behind bridge, config 010100, pass 1 [ 0.144977] pci 0000:00:1e.0: scanning behind bridge, config 030300, pass 1 [ 0.144977] PCI: Bus scan for 0000:00 returning with max=03 [ 0.144977] pci_bus 0000:00: on NUMA node 0 [ 0.144977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.145300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.145425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.145527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.174086] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.174823] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.174973] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.174973] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.174973] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.174973] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.174973] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.174973] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.175016] sync cpu 0 get result 1 max_id 3 [ 0.175016] sync cpu 1 get result 1 max_id 3 [ 0.175016] sync cpu 2 get result 1 max_id 3 [ 0.175016] sync cpu 3 get result 1 max_id 3 [ 0.175016] alloc irq_desc for 418 on node 0 [ 0.175016] alloc kstat_irqs on node 0 [ 0.175016] xenbus_probe_backend_init bus registered ok [ 0.175982] xenbus_probe_frontend_init bus registered ok [ 0.176196] xen_balloon: Initialising balloon driver with page order 0. [ 0.176994] SCSI subsystem initialized [ 0.177204] libata version 3.00 loaded. [ 0.177204] usbcore: registered new interface driver usbfs [ 0.177990] usbcore: registered new interface driver hub [ 0.178239] usbcore: registered new device driver usb [ 0.179011] PCI: Using ACPI for IRQ routing [ 0.179392] IO APIC resources couldn't be allocated. [ 0.196014] cfg80211: Using static regulatory domain info [ 0.196196] cfg80211: Regulatory domain: US [ 0.196411] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.196846] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.196969] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.196969] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.196969] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.196969] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.196969] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.196979] cfg80211: Calling CRDA for country: US [ 0.197187] NetLabel: Initializing [ 0.197187] NetLabel: domain hash size = 128 [ 0.197384] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.197596] NetLabel: unlabeled traffic allowed by default [ 0.198977] Switched to high resolution mode on CPU 0 [ 0.199120] Switched to high resolution mode on CPU 2 [ 0.199351] Switched to high resolution mode on CPU 1 [ 0.199540] Switched to high resolution mode on CPU 3 [ 0.205023] pnp: PnP ACPI init [ 0.205286] ACPI: bus type pnp registered [ 0.206224] xen: registering gsi 8 triggering 1 polarity 0 [ 0.206232] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.206479] xen: --> irq=8 [ 0.206482] xen_set_ioapic_routing: irq 8 gsi 8 vector 8 ioapic 0 pin 8 triggering 0 polarity 0 [ 0.207128] xen: registering gsi 13 triggering 1 polarity 0 [ 0.207131] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.207362] xen: --> irq=13 [ 0.207365] xen_set_ioapic_routing: irq 13 gsi 13 vector 13 ioapic 0 pin 13 triggering 0 polarity 0 [ 0.208704] xen: registering gsi 6 triggering 1 polarity 0 [ 0.208706] xen_allocate_pirq: returning irq 6 for gsi 6 [ 0.208932] xen: --> irq=6 [ 0.208934] xen_set_ioapic_routing: irq 6 gsi 6 vector 6 ioapic 0 pin 6 triggering 0 polarity 0 [ 0.211712] xen: registering gsi 4 triggering 1 polarity 0 [ 0.211715] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.211910] xen: --> irq=4 [ 0.211912] xen_set_ioapic_routing: irq 4 gsi 4 vector 4 ioapic 0 pin 4 triggering 0 polarity 0 [ 0.212861] xen: registering gsi 1 triggering 1 polarity 0 [ 0.212863] xen_allocate_pirq: returning irq 1 for gsi 1 [ 0.213072] xen: --> irq=1 [ 0.213075] xen_set_ioapic_routing: irq 1 gsi 1 vector 1 ioapic 0 pin 1 triggering 0 polarity 0 [ 0.213760] xen: registering gsi 12 triggering 1 polarity 0 [ 0.213763] xen_allocate_pirq: returning irq 12 for gsi 12 [ 0.213976] xen: --> irq=12 [ 0.213978] xen_set_ioapic_routing: irq 12 gsi 12 vector 12 ioapic 0 pin 12 triggering 0 polarity 0 [ 0.215755] pnp: PnP ACPI: found 18 devices [ 0.215982] ACPI: ACPI bus type pnp unregistered [ 0.216238] system 00:01: iomem range 0xfed14000-0xfed19fff could not be reserved [ 0.216371] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved [ 0.216371] system 00:07: ioport range 0x290-0x29f has been reserved [ 0.216371] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.216371] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.216371] system 00:08: ioport range 0x500-0x57f has been reserved [ 0.216371] system 00:08: iomem range 0xfed08000-0xfed08fff has been reserved [ 0.216371] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.216371] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.216371] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.216371] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved [ 0.216371] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.216371] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.216371] system 00:10: iomem range 0xe0000000-0xefffffff has been reserved [ 0.216371] system 00:11: iomem range 0x0-0x9ffff could not be reserved [ 0.216371] system 00:11: iomem range 0xc0000-0xcffff could not be reserved [ 0.216371] system 00:11: iomem range 0xe0000-0xfffff could not be reserved [ 0.216371] system 00:11: iomem range 0x100000-0x7cbfffff could not be reserved [ 0.216371] system 00:11: iomem range 0xe0000000-0xffffffff could not be reserved [ 0.221171] pciback 0000:00:00.0: probing... [ 0.221179] pciback 0000:00:02.0: probing... [ 0.221186] pciback 0000:00:02.1: probing... [ 0.221193] pciback 0000:00:03.0: probing... [ 0.221200] pciback 0000:00:19.0: probing... [ 0.221206] pciback 0000:00:1a.0: probing... [ 0.221213] pciback 0000:00:1a.1: probing... [ 0.221224] pciback 0000:00:1a.2: probing... [ 0.221235] pciback 0000:00:1a.7: probing... [ 0.221242] pciback 0000:00:1b.0: probing... [ 0.221248] pciback 0000:00:1c.0: probing... [ 0.221258] pciback 0000:00:1c.4: probing... [ 0.221265] pciback 0000:00:1d.0: probing... [ 0.221274] pciback 0000:00:1d.1: probing... [ 0.221280] pciback 0000:00:1d.2: probing... [ 0.221287] pciback 0000:00:1d.7: probing... [ 0.221294] pciback 0000:00:1e.0: probing... [ 0.221300] pciback 0000:00:1f.0: probing... [ 0.221307] pciback 0000:00:1f.2: probing... [ 0.221314] pciback 0000:00:1f.3: probing... [ 0.221321] pciback 0000:00:1f.5: probing... [ 0.221333] pciback 0000:01:00.0: probing... [ 0.221339] pciback 0000:03:00.0: probing... [ 0.221346] pciback 0000:03:03.0: probing... [ 0.227438] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.227686] pci 0000:03:00.0: BAR 6: address space collision on of device [0xfebe0000-0xfebeffff] [ 0.228002] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.228002] pci 0000:00:1c.0: IO window: disabled [ 0.228002] pci 0000:00:1c.0: MEM window: disabled [ 0.228002] pci 0000:00:1c.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff [ 0.228002] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:01 [ 0.228002] pci 0000:00:1c.4: IO window: 0xd000-0xdfff [ 0.228002] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff [ 0.228002] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.228002] pci 0000:03:00.0: BAR 6: got res [0xfeb00000-0xfeb0ffff] bus [0xfeb00000-0xfeb0ffff] flags 0x27200 [ 0.228002] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.228002] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.228002] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff [ 0.228002] pci 0000:00:1e.0: PREFETCH window: 0x000000fd800000-0x000000fdffffff [ 0.228002] xen: registering gsi 17 triggering 0 polarity 1 [ 0.228002] alloc irq_desc for 17 on node 0 [ 0.228002] alloc kstat_irqs on node 0 [ 0.231274] xen: --> irq=17 [ 0.231277] xen_set_ioapic_routing: irq 17 gsi 17 vector 17 ioapic 0 pin 17 triggering 1 polarity 1 [ 0.231691] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.231919] pci 0000:00:1c.0: setting latency timer to 64 [ 0.231930] xen: registering gsi 17 triggering 0 polarity 1 [ 0.231933] xen_allocate_pirq: returning irq 17 for gsi 17 [ 0.232144] xen: --> irq=17 [ 0.232147] xen_set_ioapic_routing: irq 17 gsi 17 vector 17 ioapic 0 pin 17 triggering 1 polarity 1 [ 0.232264] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.232264] pci 0000:00:1c.4: setting latency timer to 64 [ 0.232264] pci 0000:00:1e.0: setting latency timer to 64 [ 0.232264] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.232264] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.232264] pci_bus 0000:02: resource 2 pref mem [0xfd700000-0xfd7fffff] [ 0.232264] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.232264] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.232264] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.232264] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.232264] pci_bus 0000:03: resource 2 pref mem [0xfd800000-0xfdffffff] [ 0.232264] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.232264] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.232883] NET: Registered protocol family 2 [ 0.233172] IP route cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.233634] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.234431] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.235041] TCP: Hash tables configured (established 65536 bind 65536) [ 0.235274] TCP reno registered [ 0.235587] NET: Registered protocol family 1 [ 0.235893] Trying to unpack rootfs image as initramfs... [ 0.244983] Freeing initrd memory: 6846k freed [ 0.248028] kvm: no hardware support [ 0.248279] has_svm: not amd [ 0.248491] kvm: no hardware support [ 0.252875] Microcode Update Driver: v2.00 , Peter Oruba [ 0.253280] Scanning for low memory corruption every 60 seconds [ 0.254089] audit: initializing netlink socket (disabled) [ 0.254313] type=2000 audit(1266122092.834:1): initialized [ 0.262119] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.268092] VFS: Disk quotas dquot_6.5.2 [ 0.273054] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.275890] msgmni has been set to 851 [ 0.276284] SELinux: Registering netfilter hooks [ 0.276919] alg: No test for stdrng (krng) [ 0.277353] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.277747] io scheduler noop registered [ 0.277966] io scheduler anticipatory registered [ 0.278176] io scheduler deadline registered [ 0.278438] io scheduler cfq registered (default) [ 0.278696] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x18f [ 0.278701] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278704] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x616 [ 0.278707] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xbb [ 0.278712] pci 0000:00:02.0: calling quirk_e100_interrupt+0x0/0x18f [ 0.278715] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278718] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x616 [ 0.278721] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xbb [ 0.278725] pci 0000:00:02.1: calling quirk_e100_interrupt+0x0/0x18f [ 0.278727] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278730] pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x616 [ 0.278733] pci 0000:00:02.1: calling pci_fixup_video+0x0/0xbb [ 0.278737] pci 0000:00:03.0: calling quirk_e100_interrupt+0x0/0x18f [ 0.278740] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278743] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x616 [ 0.278746] pci 0000:00:03.0: calling pci_fixup_video+0x0/0xbb [ 0.278750] pci 0000:00:19.0: calling quirk_e100_interrupt+0x0/0x18f [ 0.278753] pci 0000:00:19.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278756] pci 0000:00:19.0: calling quirk_usb_early_handoff+0x0/0x616 [ 0.278758] pci 0000:00:19.0: calling pci_fixup_video+0x0/0xbb [ 0.278763] pci 0000:00:1a.0: calling quirk_e100_interrupt+0x0/0x18f [ 0.278765] pci 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278768] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x616 [ 0.278780] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.278782] pci 0000:00:1a.0: Performing full reset [ 0.278798] pci 0000:00:1a.0: calling pci_fixup_video+0x0/0xbb [ 0.278802] pci 0000:00:1a.1: calling quirk_e100_interrupt+0x0/0x18f [ 0.278805] pci 0000:00:1a.1: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278808] pci 0000:00:1a.1: calling quirk_usb_early_handoff+0x0/0x616 [ 0.278816] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.278818] pci 0000:00:1a.1: Performing full reset [ 0.278833] pci 0000:00:1a.1: calling pci_fixup_video+0x0/0xbb [ 0.278837] pci 0000:00:1a.2: calling quirk_e100_interrupt+0x0/0x18f [ 0.278840] pci 0000:00:1a.2: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278843] pci 0000:00:1a.2: calling quirk_usb_early_handoff+0x0/0x616 [ 0.278850] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.278853] pci 0000:00:1a.2: Performing full reset [ 0.278870] pci 0000:00:1a.2: calling pci_fixup_video+0x0/0xbb [ 0.278874] pci 0000:00:1a.7: calling quirk_e100_interrupt+0x0/0x18f [ 0.278877] pci 0000:00:1a.7: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278880] pci 0000:00:1a.7: calling quirk_usb_early_handoff+0x0/0x616 [ 0.278915] pci 0000:00:1a.7: calling pci_fixup_video+0x0/0xbb [ 0.278920] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x18f [ 0.278923] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278926] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x616 [ 0.278929] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xbb [ 0.278933] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x18f [ 0.278936] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278938] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x616 [ 0.278941] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xbb [ 0.278945] pci 0000:00:1c.4: calling quirk_e100_interrupt+0x0/0x18f [ 0.278948] pci 0000:00:1c.4: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278951] pci 0000:00:1c.4: calling quirk_usb_early_handoff+0x0/0x616 [ 0.278954] pci 0000:00:1c.4: calling pci_fixup_video+0x0/0xbb [ 0.278958] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x18f [ 0.278961] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278964] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x616 [ 0.278971] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.278973] pci 0000:00:1d.0: Performing full reset [ 0.278988] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xbb [ 0.278993] pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x18f [ 0.278996] pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x22 [ 0.278998] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x616 [ 0.279013] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.279015] pci 0000:00:1d.1: Performing full reset [ 0.279030] pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xbb [ 0.279042] pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x18f [ 0.279045] pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x22 [ 0.279048] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x616 [ 0.279056] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.279058] pci 0000:00:1d.2: Performing full reset [ 0.279073] pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xbb [ 0.279077] pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x18f [ 0.279080] pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x22 [ 0.279083] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x616 [ 0.279100] pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xbb [ 0.279105] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x18f [ 0.279108] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.279110] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x616 [ 0.279113] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xbb [ 0.279117] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x18f [ 0.279120] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.279123] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x616 [ 0.279126] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xbb [ 0.279130] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x18f [ 0.279133] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x22 [ 0.279136] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x616 [ 0.279138] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xbb [ 0.279142] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x18f [ 0.279145] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x22 [ 0.279148] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x616 [ 0.279151] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xbb [ 0.279155] pci 0000:00:1f.5: calling quirk_e100_interrupt+0x0/0x18f [ 0.279158] pci 0000:00:1f.5: calling quirk_cardbus_legacy+0x0/0x22 [ 0.279161] pci 0000:00:1f.5: calling quirk_usb_early_handoff+0x0/0x616 [ 0.279163] pci 0000:00:1f.5: calling pci_fixup_video+0x0/0xbb [ 0.279167] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.279170] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x616 [ 0.279173] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xbb [ 0.279177] pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.279181] pci 0000:03:00.0: calling quirk_ioapic_rmw+0x0/0x23 [ 0.279184] pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x616 [ 0.279186] pci 0000:03:00.0: calling pci_fixup_video+0x0/0xbb [ 0.279193] pci 0000:03:00.0: Boot video device [ 0.279196] pci 0000:03:03.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.279199] pci 0000:03:03.0: calling quirk_usb_early_handoff+0x0/0x616 [ 0.279202] pci 0000:03:03.0: calling pci_fixup_video+0x0/0xbb [ 0.279586] alloc irq_desc for 417 on node 0 [ 0.279589] alloc kstat_irqs on node 0 [ 0.279626] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.280015] alloc irq_desc for 416 on node 0 [ 0.280017] alloc kstat_irqs on node 0 [ 0.280052] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.280532] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.281513] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.281902] ACPI: Power Button [PWRF] [ 0.282274] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.282657] ACPI: Power Button [PWRB] [ 0.283879] ACPI: SSDT 000000007cb80270 00235 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.284909] ACPI: SSDT 000000007cb80b70 004B2 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.286027] Marking TSC unstable due to TSC halts in idle [ 0.286271] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.287861] ACPI: SSDT 000000007cb804b0 00235 (v01 DpgPmm P002Ist 00000012 INTL 20060113) [ 0.288682] ACPI: SSDT 000000007cb81030 00085 (v01 PmRef P002Cst 00003000 INTL 20060113) [ 0.289816] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.291023] ACPI: SSDT 000000007cb806f0 00235 (v01 DpgPmm P003Ist 00000012 INTL 20060113) [ 0.292243] ACPI: SSDT 000000007cb810c0 00085 (v01 PmRef P003Cst 00003000 INTL 20060113) [ 0.293748] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.294981] ACPI: SSDT 000000007cb80930 00235 (v01 DpgPmm P004Ist 00000012 INTL 20060113) [ 0.295358] ACPI: SSDT 000000007cb81150 00085 (v01 PmRef P004Cst 00003000 INTL 20060113) [ 0.296945] ACPI: CPU-1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.301580] Event-channel device installed. [ 0.306564] blktap_device_init: blktap device major 253 [ 0.306813] blktap_ring_init: blktap ring major: 251 [ 0.308238] registering netback [ 0.308627] pciback: pcistub_init_devices_late [ 0.316813] alloc irq_desc for 415 on node 0 [ 0.316816] alloc kstat_irqs on node 0 [ 0.317938] hpet_acpi_add: no address or irqs in _CRS [ 0.318486] Non-volatile memory driver v1.3 [ 0.318806] Linux agpgart interface v0.103 [ 0.319035] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset [ 0.320997] agpgart-intel 0000:00:00.0: detected 32764K stolen memory [ 0.336237] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.336728] [drm] Initialized drm 1.1.0 20060810 [ 0.337042] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.342881] brd: module loaded [ 0.345049] loop: module loaded [ 0.345513] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.346817] ata_piix 0000:00:1f.2: version 2.13 [ 0.346838] xen: registering gsi 22 triggering 0 polarity 1 [ 0.346844] alloc irq_desc for 22 on node 0 [ 0.346848] alloc kstat_irqs on node 0 [ 0.346853] xen: --> irq=22 [ 0.346857] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin 22 triggering 1 polarity 1 [ 0.347255] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.347521] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.347927] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.348064] scsi0 : ata_piix [ 0.348606] scsi1 : ata_piix [ 0.351756] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14 [ 0.351972] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15 [ 0.352235] xen: registering gsi 22 triggering 0 polarity 1 [ 0.352238] xen_allocate_pirq: returning irq 22 for gsi 22 [ 0.352458] xen: --> irq=22 [ 0.352460] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin 22 triggering 1 polarity 1 [ 0.352843] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.353096] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.353517] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.353651] scsi2 : ata_piix [ 0.354174] scsi3 : ata_piix [ 0.357016] ata3: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb080 irq 22 [ 0.357237] ata4: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xb088 irq 22 [ 0.358132] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 0.358362] Copyright (c) 1999-2006 Intel Corporation. [ 0.358676] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 0.358888] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 0.359147] xen: registering gsi 20 triggering 0 polarity 1 [ 0.359150] alloc irq_desc for 20 on node 0 [ 0.359153] alloc kstat_irqs on node 0 [ 0.359162] xen: --> irq=20 [ 0.359165] xen_set_ioapic_routing: irq 20 gsi 20 vector 20 ioapic 0 pin 20 triggering 1 polarity 1 [ 0.359562] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.359778] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [ 0.360157] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.360157] alloc irq_desc for 414 on node 0 [ 0.360157] alloc kstat_irqs on node 0 [ 0.451952] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:23:54:9a:46:ea [ 0.452358] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 0.452641] 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: ffffff-0ff [ 0.453090] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.453315] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.453871] sky2 driver version 1.23 [ 0.454420] tun: Universal TUN/TAP device driver, 1.6 [ 0.454628] tun: (C) 1999-2004 Max Krasnyansky [ 0.455202] console [netcon0] enabled [ 0.455416] netconsole: network logging started [ 0.456016] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.456262] ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96 [ 0.456290] xen: registering gsi 18 triggering 0 polarity 1 [ 0.456296] alloc irq_desc for 18 on node 0 [ 0.456299] alloc kstat_irqs on node 0 [ 0.456303] xen: --> irq=18 [ 0.456307] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1 [ 0.456696] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.456928] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.456934] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.457181] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file 'devices' [ 0.457188] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.457329] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.457741] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.457746] ehci_hcd 0000:00:1a.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 0.457799] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.461690] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.461926] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.461929] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 0.461953] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8f9000 [ 0.462002] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.466066] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 0.471081] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.471334] usb usb1: default language 0x0409 [ 0.471347] usb usb1: udev 1, busnum 1, minor = 0 [ 0.471350] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.471595] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.471974] usb usb1: Product: EHCI Host Controller [ 0.472064] usb usb1: Manufacturer: Linux 2.6.31.6 ehci_hcd [ 0.472064] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.472671] usb usb1: uevent [ 0.472785] usb usb1: usb_probe_device [ 0.472789] usb usb1: configuration #1 chosen from 1 choice [ 0.473049] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.473070] usb 1-0:1.0: uevent [ 0.473183] hub 1-0:1.0: usb_probe_interface [ 0.473186] hub 1-0:1.0: usb_probe_interface - got id [ 0.473189] hub 1-0:1.0: USB hub found [ 0.473437] hub 1-0:1.0: 6 ports detected [ 0.473646] hub 1-0:1.0: standalone hub [ 0.473649] hub 1-0:1.0: no power switching (usb 1.0) [ 0.473652] hub 1-0:1.0: individual port over-current protection [ 0.473655] hub 1-0:1.0: power on to power good time: 20ms [ 0.473662] hub 1-0:1.0: local power source is good [ 0.473665] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.473709] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.473752] xen: registering gsi 23 triggering 0 polarity 1 [ 0.473758] alloc irq_desc for 23 on node 0 [ 0.473761] alloc kstat_irqs on node 0 [ 0.473765] xen: --> irq=23 [ 0.473769] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin 23 triggering 1 polarity 1 [ 0.474166] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.474166] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.474166] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.474668] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '002' [ 0.474808] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.475201] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.475206] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 0.475251] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.479153] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.479384] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.479387] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 0.479410] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8f8000 [ 0.479629] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.483522] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 0.489032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.489272] usb usb2: default language 0x0409 [ 0.489285] usb usb2: udev 1, busnum 2, minor = 128 [ 0.489288] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.489526] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.489900] usb usb2: Product: EHCI Host Controller [ 0.490015] usb usb2: Manufacturer: Linux 2.6.31.6 ehci_hcd [ 0.490015] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.490601] usb usb2: uevent [ 0.490706] usb usb2: usb_probe_device [ 0.490709] usb usb2: configuration #1 chosen from 1 choice [ 0.490953] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.490973] usb 2-0:1.0: uevent [ 0.491076] hub 2-0:1.0: usb_probe_interface [ 0.491080] hub 2-0:1.0: usb_probe_interface - got id [ 0.491082] hub 2-0:1.0: USB hub found [ 0.491322] hub 2-0:1.0: 6 ports detected [ 0.491533] hub 2-0:1.0: standalone hub [ 0.491536] hub 2-0:1.0: no power switching (usb 1.0) [ 0.491538] hub 2-0:1.0: individual port over-current protection [ 0.491541] hub 2-0:1.0: power on to power good time: 20ms [ 0.491548] hub 2-0:1.0: local power source is good [ 0.491551] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.491592] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.491731] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.491944] ohci_hcd: block sizes: ed 80 td 96 [ 0.492059] uhci_hcd: USB Universal Host Controller Interface driver [ 0.492452] xen: registering gsi 16 triggering 0 polarity 1 [ 0.492458] alloc irq_desc for 16 on node 0 [ 0.492461] alloc kstat_irqs on node 0 [ 0.492465] xen: --> irq=16 [ 0.492469] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1 [ 0.492860] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.493094] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.493099] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.493323] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '003' [ 0.493467] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.493880] uhci_hcd 0000:00:1a.0: detected 2 ports [ 0.494111] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.494114] uhci_hcd 0000:00:1a.0: Performing full reset [ 0.494142] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 0.494164] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c400 [ 0.494475] usb usb3: default language 0x0409 [ 0.494488] usb usb3: udev 1, busnum 3, minor = 256 [ 0.494491] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.494708] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.495104] usb usb3: Product: UHCI Host Controller [ 0.495104] usb usb3: Manufacturer: Linux 2.6.31.6 uhci_hcd [ 0.495104] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.495818] usb usb3: uevent [ 0.495936] usb usb3: usb_probe_device [ 0.495939] usb usb3: configuration #1 chosen from 1 choice [ 0.496165] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.496186] usb 3-0:1.0: uevent [ 0.496312] hub 3-0:1.0: usb_probe_interface [ 0.496315] hub 3-0:1.0: usb_probe_interface - got id [ 0.496318] hub 3-0:1.0: USB hub found [ 0.496573] hub 3-0:1.0: 2 ports detected [ 0.496775] hub 3-0:1.0: standalone hub [ 0.496777] hub 3-0:1.0: no power switching (usb 1.0) [ 0.496780] hub 3-0:1.0: individual port over-current protection [ 0.496783] hub 3-0:1.0: power on to power good time: 2ms [ 0.496790] hub 3-0:1.0: local power source is good [ 0.496793] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.496817] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.496865] xen: registering gsi 21 triggering 0 polarity 1 [ 0.496871] alloc irq_desc for 21 on node 0 [ 0.496874] alloc kstat_irqs on node 0 [ 0.496878] xen: --> irq=21 [ 0.496882] xen_set_ioapic_routing: irq 21 gsi 21 vector 21 ioapic 0 pin 21 triggering 1 polarity 1 [ 0.497266] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.497297] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.497297] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.497705] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '004' [ 0.497841] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.498227] uhci_hcd 0000:00:1a.1: detected 2 ports [ 0.498457] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.498460] uhci_hcd 0000:00:1a.1: Performing full reset [ 0.498480] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 0.498502] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c480 [ 0.498805] usb usb4: default language 0x0409 [ 0.498817] usb usb4: udev 1, busnum 4, minor = 384 [ 0.498820] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.499043] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.499212] usb usb4: Product: UHCI Host Controller [ 0.499212] usb usb4: Manufacturer: Linux 2.6.31.6 uhci_hcd [ 0.499212] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.500157] usb usb4: uevent [ 0.500278] usb usb4: usb_probe_device [ 0.500281] usb usb4: configuration #1 chosen from 1 choice [ 0.500504] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.500537] usb 4-0:1.0: uevent [ 0.500657] hub 4-0:1.0: usb_probe_interface [ 0.500660] hub 4-0:1.0: usb_probe_interface - got id [ 0.500663] hub 4-0:1.0: USB hub found [ 0.500895] hub 4-0:1.0: 2 ports detected [ 0.501105] hub 4-0:1.0: standalone hub [ 0.501107] hub 4-0:1.0: no power switching (usb 1.0) [ 0.501109] hub 4-0:1.0: individual port over-current protection [ 0.501112] hub 4-0:1.0: power on to power good time: 2ms [ 0.501128] hub 4-0:1.0: local power source is good [ 0.501131] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.501154] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.501208] xen: registering gsi 18 triggering 0 polarity 1 [ 0.501211] xen_allocate_pirq: returning irq 18 for gsi 18 [ 0.501432] xen: --> irq=18 [ 0.501436] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1 [ 0.501835] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.502082] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.502087] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.502320] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '005' [ 0.502462] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.502855] uhci_hcd 0000:00:1a.2: detected 2 ports [ 0.503084] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.503087] uhci_hcd 0000:00:1a.2: Performing full reset [ 0.503107] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 0.503114] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000c800 [ 0.503444] usb usb5: default language 0x0409 [ 0.503456] usb usb5: udev 1, busnum 5, minor = 512 [ 0.503459] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.503679] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.504065] usb usb5: Product: UHCI Host Controller [ 0.504077] usb usb5: Manufacturer: Linux 2.6.31.6 uhci_hcd [ 0.504077] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.504761] usb usb5: uevent [ 0.504896] usb usb5: usb_probe_device [ 0.504900] usb usb5: configuration #1 chosen from 1 choice [ 0.505137] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 0.505160] usb 5-0:1.0: uevent [ 0.505282] hub 5-0:1.0: usb_probe_interface [ 0.505285] hub 5-0:1.0: usb_probe_interface - got id [ 0.505287] hub 5-0:1.0: USB hub found [ 0.509915] hub 5-0:1.0: 2 ports detected [ 0.510127] hub 5-0:1.0: standalone hub [ 0.510129] hub 5-0:1.0: no power switching (usb 1.0) [ 0.510131] hub 5-0:1.0: individual port over-current protection [ 0.510134] hub 5-0:1.0: power on to power good time: 2ms [ 0.510148] hub 5-0:1.0: local power source is good [ 0.510159] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 0.510182] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.510229] xen: registering gsi 23 triggering 0 polarity 1 [ 0.510233] xen_allocate_pirq: returning irq 23 for gsi 23 [ 0.510462] xen: --> irq=23 [ 0.510466] xen_set_ioapic_routing: irq 23 gsi 23 vector 23 ioapic 0 pin 23 triggering 1 polarity 1 [ 0.510868] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.511086] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.511091] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.511316] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '006' [ 0.511472] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.511866] uhci_hcd 0000:00:1d.0: detected 2 ports [ 0.512086] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.512089] uhci_hcd 0000:00:1d.0: Performing full reset [ 0.512109] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 0.512117] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00 [ 0.512417] usb usb6: default language 0x0409 [ 0.512430] usb usb6: udev 1, busnum 6, minor = 640 [ 0.512433] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.512653] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.513039] usb usb6: Product: UHCI Host Controller [ 0.513079] usb usb6: Manufacturer: Linux 2.6.31.6 uhci_hcd [ 0.513079] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.513743] usb usb6: uevent [ 0.513860] usb usb6: usb_probe_device [ 0.513864] usb usb6: configuration #1 chosen from 1 choice [ 0.514097] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 0.514113] usb 6-0:1.0: uevent [ 0.514224] hub 6-0:1.0: usb_probe_interface [ 0.514227] hub 6-0:1.0: usb_probe_interface - got id [ 0.514230] hub 6-0:1.0: USB hub found [ 0.514491] hub 6-0:1.0: 2 ports detected [ 0.514693] hub 6-0:1.0: standalone hub [ 0.514695] hub 6-0:1.0: no power switching (usb 1.0) [ 0.514696] hub 6-0:1.0: individual port over-current protection [ 0.514699] hub 6-0:1.0: power on to power good time: 2ms [ 0.514704] hub 6-0:1.0: local power source is good [ 0.514706] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 0.514726] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.514771] xen: registering gsi 19 triggering 0 polarity 1 [ 0.514775] alloc irq_desc for 19 on node 0 [ 0.514778] alloc kstat_irqs on node 0 [ 0.514781] xen: --> irq=19 [ 0.514784] xen_set_ioapic_routing: irq 19 gsi 19 vector 19 ioapic 0 pin 19 triggering 1 polarity 1 [ 0.515177] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.515208] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.515208] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.515627] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '007' [ 0.515747] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.516171] uhci_hcd 0000:00:1d.1: detected 2 ports [ 0.516399] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.516401] uhci_hcd 0000:00:1d.1: Performing full reset [ 0.516418] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 0.516435] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000 [ 0.516709] usb usb7: default language 0x0409 [ 0.516718] usb usb7: udev 1, busnum 7, minor = 768 [ 0.516721] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.516939] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.517164] usb usb7: Product: UHCI Host Controller [ 0.517164] usb usb7: Manufacturer: Linux 2.6.31.6 uhci_hcd [ 0.517164] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.518003] usb usb7: uevent [ 0.518105] usb usb7: usb_probe_device [ 0.518108] usb usb7: configuration #1 chosen from 1 choice [ 0.518342] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 0.518357] usb 7-0:1.0: uevent [ 0.518469] hub 7-0:1.0: usb_probe_interface [ 0.518480] hub 7-0:1.0: usb_probe_interface - got id [ 0.518483] hub 7-0:1.0: USB hub found [ 0.518738] hub 7-0:1.0: 2 ports detected [ 0.518937] hub 7-0:1.0: standalone hub [ 0.518939] hub 7-0:1.0: no power switching (usb 1.0) [ 0.518941] hub 7-0:1.0: individual port over-current protection [ 0.518943] hub 7-0:1.0: power on to power good time: 2ms [ 0.518948] hub 7-0:1.0: local power source is good [ 0.518951] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 0.518970] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.519016] xen: registering gsi 18 triggering 0 polarity 1 [ 0.519019] xen_allocate_pirq: returning irq 18 for gsi 18 [ 0.519234] xen: --> irq=18 [ 0.519237] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1 [ 0.519638] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.519854] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.519859] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.520099] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '008' [ 0.520250] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.520644] uhci_hcd 0000:00:1d.2: detected 2 ports [ 0.520854] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 0.520856] uhci_hcd 0000:00:1d.2: Performing full reset [ 0.520873] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 0.520879] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080 [ 0.521155] usb usb8: default language 0x0409 [ 0.521173] usb usb8: udev 1, busnum 8, minor = 896 [ 0.521175] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.521405] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.521785] usb usb8: Product: UHCI Host Controller [ 0.521992] usb usb8: Manufacturer: Linux 2.6.31.6 uhci_hcd [ 0.522107] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.522451] usb usb8: uevent [ 0.522579] usb usb8: usb_probe_device [ 0.522582] usb usb8: configuration #1 chosen from 1 choice [ 0.522828] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 0.522844] usb 8-0:1.0: uevent [ 0.522941] hub 8-0:1.0: usb_probe_interface [ 0.522944] hub 8-0:1.0: usb_probe_interface - got id [ 0.522947] hub 8-0:1.0: USB hub found [ 0.523194] hub 8-0:1.0: 2 ports detected [ 0.523402] hub 8-0:1.0: standalone hub [ 0.523404] hub 8-0:1.0: no power switching (usb 1.0) [ 0.523406] hub 8-0:1.0: individual port over-current protection [ 0.523408] hub 8-0:1.0: power on to power good time: 2ms [ 0.523422] hub 8-0:1.0: local power source is good [ 0.523424] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 0.523443] /usr/src/xen-unstable.hg/linux-2.6-pvops.git/drivers/usb/core/inode.c: creating file '001' [ 0.523714] usbcore: registered new interface driver usblp [ 0.523932] Initializing USB Mass Storage driver... [ 0.524327] usbcore: registered new interface driver usb-storage [ 0.524544] USB Mass Storage support registered. [ 0.524880] usbcore: registered new interface driver libusual [ 0.525373] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.528506] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.528610] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.529190] mice: PS/2 mouse device common for all mice [ 0.530057] rtc_cmos 00:03: RTC can wake from S4 [ 0.530412] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.530664] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.530994] xen: registering gsi 18 triggering 0 polarity 1 [ 0.530998] xen_allocate_pirq: returning irq 18 for gsi 18 [ 0.531244] xen: --> irq=18 [ 0.531246] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 triggering 1 polarity 1 [ 0.531644] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.531963] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] [ 0.531963] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 0.533512] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 0.534298] cpuidle: using governor ladder [ 0.534516] cpuidle: using governor menu [ 0.537461] usbcore: registered new interface driver hiddev [ 0.537752] usbcore: registered new interface driver usbhid [ 0.537962] usbhid: v2.6:USB HID core driver [ 0.538448] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 0.542289] xen: registering gsi 22 triggering 0 polarity 1 [ 0.542293] xen_allocate_pirq: returning irq 22 for gsi 22 [ 0.542514] xen: --> irq=22 [ 0.542517] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin 22 triggering 1 polarity 1 [ 0.542910] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.543138] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 0.554739] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.573117] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 0.580730] ALSA device list: [ 0.580937] #0: HDA Intel at 0xfe8f0000 irq 22 [ 0.581382] Netfilter messages via NETLINK v0.30. [ 0.581618] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) [ 0.582202] ctnetlink v0.93: registering with nfnetlink. [ 0.583015] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.583250] TCP cubic registered [ 0.583456] Initializing XFRM netlink socket [ 0.584343] NET: Registered protocol family 10 [ 0.585713] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.585982] IPv6 over IPv4 tunneling driver [ 0.587092] NET: Registered protocol family 17 [ 0.587752] RPC: Registered udp transport module. [ 0.587991] RPC: Registered tcp transport module. [ 0.588628] PM: Resume from disk failed. [ 0.588645] registered taskstats version 1 [ 0.589051] Magic number: 14:476:565 [ 0.592121] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 0.596095] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.600083] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.609098] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.615080] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.618113] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.623050] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.673676] ata4: SATA link down (SStatus 0 SControl 300) [ 0.685619] ata3: SATA link down (SStatus 0 SControl 300) [ 0.719855] logips2pp: Detected unknown logitech mouse model 57 [ 0.973798] ata2.00: SATA link down (SStatus 0 SControl 300) [ 0.974039] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.113118] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.113369] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.116345] ata1.00: ATA-7: WDC WD800JD-60MSA1, 10.01E01, max UDMA/100 [ 1.116562] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.119326] ata1.00: configured for UDMA/100 [ 1.119680] scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-60MS 10.0 PQ: 0 ANSI: 5 [ 1.120598] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.120628] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.120741] sd 0:0:0:0: [sda] Write Protect is off [ 1.120744] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.120795] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.121048] sda: sda1 sda2 < sda5 > [ 1.152931] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.153222] Freeing unused kernel memory: 532k freed [ 1.153608] Write protecting the kernel read-only data: 8808k [ 1.187958] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 1.348471] usb usb3: uevent [ 1.348497] usb 3-0:1.0: uevent [ 1.348564] usb usb4: uevent [ 1.348594] usb 4-0:1.0: uevent [ 1.348665] usb usb5: uevent [ 1.348691] usb 5-0:1.0: uevent [ 1.348756] usb usb1: uevent [ 1.348780] usb 1-0:1.0: uevent [ 1.349324] usb usb6: uevent [ 1.349349] usb 6-0:1.0: uevent [ 1.349421] usb usb7: uevent [ 1.349444] usb 7-0:1.0: uevent [ 1.349511] usb usb8: uevent [ 1.349535] usb 8-0:1.0: uevent [ 1.349601] usb usb2: uevent [ 1.349624] usb 2-0:1.0: uevent [ 1.704061] usb usb3: suspend_rh (auto-stop) [ 1.704092] usb usb4: suspend_rh (auto-stop) [ 1.704122] usb usb5: suspend_rh (auto-stop) [ 1.704149] usb usb6: suspend_rh (auto-stop) [ 1.704174] usb usb7: suspend_rh (auto-stop) [ 1.704201] usb usb8: suspend_rh (auto-stop) [ 1.868002] PM: Starting manual resume from disk [ 1.868200] PM: Resume from partition 8:5 [ 1.868202] PM: Checking hibernation image. [ 1.868415] PM: Resume from disk failed. [ 1.884281] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 1.884288] PM: Basic memory bitmaps created [ 1.889351] PM: Basic memory bitmaps freed [ 1.942552] kjournald starting. Commit interval 5 seconds [ 1.942579] EXT3-fs: mounted filesystem with writeback data mode. [ 2.701208] hub 1-0:1.0: hub_suspend [ 2.701217] usb usb1: bus auto-suspend [ 2.701221] ehci_hcd 0000:00:1a.7: suspend root hub [ 2.701241] hub 2-0:1.0: hub_suspend [ 2.701246] usb usb2: bus auto-suspend [ 2.701249] ehci_hcd 0000:00:1d.7: suspend root hub [ 2.701268] hub 3-0:1.0: hub_suspend [ 2.701272] usb usb3: bus auto-suspend [ 2.701276] usb usb3: suspend_rh [ 2.701296] hub 4-0:1.0: hub_suspend [ 2.701301] usb usb4: bus auto-suspend [ 2.701303] usb usb4: suspend_rh [ 2.701322] hub 5-0:1.0: hub_suspend [ 2.701326] usb usb5: bus auto-suspend [ 2.701329] usb usb5: suspend_rh [ 2.701348] hub 6-0:1.0: hub_suspend [ 2.701352] usb usb6: bus auto-suspend [ 2.701355] usb usb6: suspend_rh [ 2.701373] hub 7-0:1.0: hub_suspend [ 2.701377] usb usb7: bus auto-suspend [ 2.701380] usb usb7: suspend_rh [ 2.701398] hub 8-0:1.0: hub_suspend [ 2.701403] usb usb8: bus auto-suspend [ 2.701405] usb usb8: suspend_rh [ 3.355262] udevd version 125 started [ 3.489750] usb usb3: uevent [ 3.489792] usb 3-0:1.0: uevent [ 3.489890] usb usb4: uevent [ 3.489922] usb 4-0:1.0: uevent [ 3.490018] usb usb5: uevent [ 3.490049] usb 5-0:1.0: uevent [ 3.490138] usb usb1: uevent [ 3.490169] usb 1-0:1.0: uevent [ 3.490902] usb usb6: uevent [ 3.490949] usb 6-0:1.0: uevent [ 3.491067] usb usb7: uevent [ 3.491102] usb 7-0:1.0: uevent [ 3.491189] usb usb8: uevent [ 3.491221] usb 8-0:1.0: uevent [ 3.491310] usb usb2: uevent [ 3.491347] usb 2-0:1.0: uevent [ 5.655481] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k [ 5.920661] EXT3 FS on sda1, internal journal [ 8.914360] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.769831] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 10.770060] 0000:00:19.0: eth1: 10/100 speed: disabling TSO [ 10.770538] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 15.615774] alloc irq_desc for 413 on node 0 [ 15.615777] alloc kstat_irqs on node 0 [ 15.615822] alloc irq_desc for 412 on node 0 [ 15.615825] alloc kstat_irqs on node 0 [ 15.615834] xenbus_probe wake_waiting [ 15.616055] xenbus_probe wake_waiting [ 15.618456] XENBUS: Unable to read cpu state [ 15.618875] XENBUS: Unable to read cpu state [ 15.619255] XENBUS: Unable to read cpu state [ 15.619620] XENBUS: Unable to read cpu state [ 15.620119] xenbus_probe_devices backend [ 15.621661] xenbus_probe_devices failed xenbus_directory [ 15.621900] backend_probe_and_watch devices probed ok [ 15.622265] backend_probe_and_watch watch add ok ok [ 15.622477] backend_probe_and_watch all done [ 15.622683] xenbus_probe_devices device [ 15.623034] xenbus_probe_devices failed xenbus_directory [ 15.623257] frontend_probe_and_watch devices probed ok [ 15.623611] frontend_probe_and_watch watch add ok ok [ 15.623814] frontend_probe_and_watch all done [ 18.845572] blktap_sysfs_create: adding attributes for dev ffff88001b8f2000 [ 18.845938] blktap_control_allocate_tap: allocated tap ffff88001dd3e800 [ 18.872952] blktap_ring_open: opening device blktap0 [ 18.873004] blktap_ring_open: opened device 0 [ 18.873391] blktap_ring_mmap: blktap: mapping pid is 3668 [ 18.873598] blktap_validate_params: aio:/perftest/tapraw.img: capacity: 6291456, sector-size: 512 [ 18.873967] blktap_validate_params: aio:/perftest/tapraw.img: capacity: 6291456, sector-size: 512 [ 18.874336] blktap_device_create: minor 0 sectors 6291456 sector-size 512 [ 18.874698] blktap_device_create: creation of 253:0: 0 [ 19.257451] device vif1.0 entered promiscuous mode [ 19.262732] xenbr0: port 1(vif1.0) entering forwarding state [ 21.232014] eth1: no IPv6 routers present [ 25.939026] xenbr0: no IPv6 routers present [ 30.173053] vif1.0: no IPv6 routers present [ 83.601152] alloc irq_desc for 411 on node 0 [ 83.601156] alloc kstat_irqs on node 0 [ 83.615314] alloc irq_desc for 410 on node 0 [ 83.615319] alloc kstat_irqs on node 0 [ 84.355374] xenbr0: port 1(vif1.0) entering disabled state [ 84.358296] xenbr0: port 1(vif1.0) entering disabled state [ 85.761533] blktap_device_destroy: destroy device 0 users 0 [ 85.762293] blktap_ring_vm_close: unmapping ring 0 [ 85.762515] blktap_ring_release: freeing device 0 [ 85.766256] blktap_sysfs_destroy