WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

RE: [Xen-users] How to: Improve Network Throughput of a XEN kernel?

Yes, thank you Boris for pointing that out. I found that was defiantly true. The 3.2.1 xen hypervisor could only boot the 2.6.26-2 xen kernel and the xenified 2.6.31.12.

Additionally I found that:

Xend does not start when using pv_ops dom0 kernel?

In December 2009 pv_ops dom0 kernel modules were renamed to have a "xen-" prefix in them, ie. "evtchn.ko" became "xen-evtchn.ko".

This makes Xen 3.4.x xend fail to start, because it tried to load "evtchn.ko", but that doesn't exist. You need to load "xen-evtchn.ko" and then start xend. Fedora 12 xen-3.4.2-2 rpms have this problem fixed.

Also make sure you have xenfs mounted to "/proc/xen", that's needed aswell.

[Source: http://wiki.xensource.com/xenwiki/XenParavirtOps]

And it appears the Debian xen-3.4.2-2 debs (in squeeze) have not fixed this problem.

Lastly I am still doing some reading on the grub2 package and how to configure it. It turns out that I have been using grub-legacy (or just good old grub) for so long that configuring the grub2 boot loader is turning out to be my own personal kryptonite.

 

I am still working on getting the hypervisor to load the dom0 kernel in a Ubuntu system.

 

I have noticed an example in your wordpress @ Set up Xen 3.4.3-rc2 & Libvirt 0.7.0 Dom0 (with 2.6.31.8 xenified aka Suse kernel) on top of Ubuntu 9.10 Server

 

With CONFIG_CMDLINE="root=/dev/sdb11 ro console=tty0"

 

menuentry "Xen 3.4 / Ubuntu 9.10 kernel 2.6.31.8 xenified" {
insmod ext2
set root=(hd1,10)
multiboot (hd1,10)/xen-3.4.gz
module (hd1,10)/vmlinuz-2.6.31.8
module (hd1,10)/initrd-2.6.31.8.img
}

 

I am sure you wouldn't of mentioned the CONFIG_CMDLINE kernel option is it was not important for using with grub2 right? I have not have to compile a kernel with the command line previous as I was just able to supply the arguments on the kernel line of my menu.lst (grub configuration file).


P.S: What is your feeling on using a recent Ubuntu system with grub-legacy as the boot loader? I noticed that Squeeze has adopted grub2 package as well too...


 
-M





Date: Sat, 27 Feb 2010 04:32:59 -0800
From: bderzhavets@xxxxxxxxx
Subject: Re: FW: [Xen-users] How to: Improve Network Throughput of a XEN kernel?
To: jbeulich@xxxxxxxxxx; mike.viau@xxxxxxxxxxxxxxx
CC: xen-devel@xxxxxxxxxxxxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx

You cannot load pvops kernel under xen-hypervisor 3.2.1  ( >=3.4.0 in general)

Boris.

--- On Fri, 2/26/10, Mike Viau <viaum@xxxxxxxxxxxxxxx> wrote:

From: Mike Viau <viaum@xxxxxxxxxxxxxxx>
Subject: FW: [Xen-users] How to: Improve Network Throughput of a XEN kernel?
To: bderzhavets@xxxxxxxxx, jbeulich@xxxxxxxxxx
Cc: xen-users@xxxxxxxxxxxxxxxxxxx, xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Friday, February 26, 2010, 3:19 PM

Hello again,

Just a quick update...

I was really hoping it was just going to be an issue with the kernel .config, however I copied exact configuration from the working Debain 2.6.26-2-xen-amd64 kernel and used a make oldconfig but the end result was the same.

After booting the xenified (2.6.31.12) or pvops kernel (2.6.31.6) via both xen-hypervisor 3.2.1 or xen-hypervisor 3.4.2 the maximum data transfer to/from the Dom0 (Xen host) is ~1MB/s.

Next I plan on re-trying my efforts on a Ubuntu system to see if same network bottlenecking is present.




Date: Fri, 26 Feb 2010 09:16:59 -0800
From: bderzhavets@xxxxxxxxx
Subject: Re: [Xen-users] How to: Improve Network Throughput of a XEN kernel?
To: xen-users@xxxxxxxxxxxxxxxxxxx; viaum@xxxxxxxxxxxxxxx

Would escalate to xen-devel.  2.6.31.8 (12) aka Suse xenified  was Jan Beulich stuff.
He might have an answer.
Boris.

--- On Fri, 2/26/10, Mike Viau <viaum@xxxxxxxxxxxxxxx> wrote:

From: Mike Viau <viaum@xxxxxxxxxxxxxxx>
Subject: [Xen-users] How to: Improve Network Throughput of a XEN kernel?
To: xen-users@xxxxxxxxxxxxxxxxxxx
Cc: waldi@xxxxxxxxxx
Date: Friday, February 26, 2010, 12:09 PM

Hi there,

I am starting a new thread to try and solve a problem I am having will slow network throughput to the XEN host (not to a domU).

I have confirmed my problem occurs with PVOPS 'xen/master' kernel as well using http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.31.6-pvops-dom0-xen-master-x86_64 as the .config.

It also occurs with a forward ported xenified kernel (2.6.31.12) using the attached config-11-xen (.config).

However when using the xen kernel found in debain lenny (2.6.26-2) for the amd64 architecture I get similiar transfer rates to my Xen host as I do on a baremetel kernel.

Bastian Blank perhaps you could point me in the right direction in regards to a debian specific customization or patch I should be aware of?

Maxium transfer rate (to/from hard disk) using the PVOPS 'xen/master' kernel and forward ported xenified kernel (2.6.31.12) is bottlenecking at ~1MB/s. On the debain lenny xen kernel I am getting ~4.5MB/s.

I was hoping one could suggest options in the .config that might be modified in order to improve network throughput of a XEN kernel and therefor increase the data transfer rates over the netowork to and from the Xen host.

Thanks alot for any help! As always I will be willing to accept any suggestions :)


-M




Not using Hotmail on your phone? Why not? Get it now.



Live connected with Hotmail on your phone. Learn more.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users