Run this patch through scripts/checkpatch.pl
On Sat, Feb 13, 2010 at 01:25:22AM -0500, Dulloor wrote:
> diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
> index 86bef0f..7a24070 100644
> --- a/arch/x86/kernel/setup.c
> +++ b/arch/x86/kernel/setup.c
> @@ -940,7 +940,8 @@ void __init setup_arch(char **cmdline_p)
> /*
> * Parse SRAT to discover nodes.
> */
> - acpi_numa_init();
> + if (acpi_numa > 0)
> + acpi_numa_init();
Why? Why can't we just try acpi_numa_init()?
> #endif
>
> initmem_init(0, max_pfn);
> diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
> index 459913b..14fa654 100644
> --- a/arch/x86/mm/numa_64.c
> +++ b/arch/x86/mm/numa_64.c
> @@ -11,7 +11,9 @@
> #include <linux/ctype.h>
> #include <linux/module.h>
> #include <linux/nodemask.h>
> +#include <linux/cpumask.h>
> #include <linux/sched.h>
> +#include <xen/interface/xen.h>
>
> #include <asm/e820.h>
> #include <asm/proto.h>
> @@ -19,6 +21,7 @@
> #include <asm/numa.h>
> #include <asm/acpi.h>
> #include <asm/k8.h>
> +#include <asm/xen/hypervisor.h>
If one does not set CONFIG_XEN does this compile?
>
> struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
> EXPORT_SYMBOL(node_data);
> @@ -428,7 +431,6 @@ static int __init numa_emulation(unsigned long start_pfn,
> unsigned long last_pfn
> */
> if (!strchr(cmdline, '*') && !strchr(cmdline, ',')) {
> long n = simple_strtol(cmdline, NULL, 0);
> -
No need for this.
> num_nodes = split_nodes_equally(nodes, &addr, max_addr, 0, n);
> if (num_nodes < 0)
> return num_nodes;
> @@ -522,16 +524,162 @@ out:
> numa_init_array();
> return 0;
> }
> +struct xen_domain_numa_layout pv_numa_layout;
> +
> +void dump_numa_layout(struct xen_domain_numa_layout *layout)
> +{
> + unsigned int i, j;
> + char vcpumask[128];
> + printk("NUMA-LAYOUT(Dom0) : vcpus(%u), vnodes(%u)\n",
> + layout->max_vcpus, layout->max_vnodes);
Redo the printk's. They need KERN_DEBUG
> + for (i = 0; i < layout->max_vnodes; i++)
> + {
> + struct xen_vnode_data *vnode_data = &layout->vnode_data[i];
> + cpumask_scnprintf(vcpumask, sizeof(vcpumask),
> + ((cpumask_t *)&vnode_data->vcpu_mask));
> + printk("vnode[%u]:mnode(%u), node_nr_pages(%lx), vcpu_mask(%s)\n",
> + vnode_data->vnode_id, vnode_data->mnode_id,
> + (unsigned long)vnode_data->nr_pages, vcpumask);
This one too.
> + }
> +
> + printk("vnode distances :\n");
and
> + for (i = 0; i < layout->max_vnodes; i++)
> + printk("\tvnode[%u]", i);
> + for (i = 0; i < layout->max_vnodes; i++)
> + {
> + printk("\nvnode[%u]", i);
this
> + for (j = 0; j < layout->max_vnodes; j++)
> + printk("\t%u", layout->vnode_distance[i*layout->max_vnodes + j]);
> + printk("\n");
one to.
> + }
> + return;
> +}
> +
> +static void __init xen_init_slit_table(struct xen_domain_numa_layout *layout)
> +{
> + /* Construct a slit table (using layout->vnode_distance).
> + * Copy it to acpi_slit. */
> + return;
> +}
> +/* Distribute the vcpus over the vnodes according to their affinity */
> +static void __init xen_init_numa_array(struct xen_domain_numa_layout *layout)
> +{
> + int vcpu, vnode;
> +
> + printk(KERN_INFO "xen_numa_init_array - cpu_to_node initialization\n");
pr_debug instead?
> +
> + for (vnode = 0; vnode < layout->max_vnodes; vnode++)
> + {
> + struct xen_vnode_data *vnode_data = &layout->vnode_data[vnode];
> + cpumask_t vcpu_mask = *((cpumask_t *)&vnode_data->vcpu_mask);
> +
> + for (vcpu = 0; vcpu < layout->max_vcpus; vcpu++)
> + {
> + if (cpu_isset(vcpu, vcpu_mask))
> + {
> + if (early_cpu_to_node(vcpu) != NUMA_NO_NODE)
> + {
> + printk(KERN_INFO "EARLY vcpu[%d] on vnode[%d]\n",
> + vcpu, early_cpu_to_node(vcpu));
> + continue;
> + }
> + printk(KERN_INFO "vcpu[%d] on vnode[%d]\n", vcpu, vnode);
> + numa_set_node(vcpu, vnode);
> + }
> + }
> + }
> + return;
> +}
> +
> +static int __init xen_numa_emulation(struct xen_domain_numa_layout *layout,
> + unsigned long start_pfn, unsigned long last_pfn)
> +{
> + int num_vnodes, i;
> + u64 node_start_addr, node_end_addr, max_addr;
> +
> + printk(KERN_INFO "xen_numa_emulation : max_vnodes(%d), max_vcpus(%d)",
> + layout->max_vnodes,
> layout->max_vcpus);
> + dump_numa_layout(layout);
> + memset(&nodes, 0, sizeof(nodes));
> +
> + num_vnodes = layout->max_vnodes;
> + BUG_ON(num_vnodes > MAX_NUMNODES);
Hmm.. Is that really neccessary? What if we just do WARN("some lengthy
explanation"),
and bail out and not initialize these structures?
> +
> + max_addr = last_pfn << PAGE_SHIFT;
> +
> + node_start_addr = start_pfn << PAGE_SHIFT;
> + for (i = 0; i < num_vnodes; i++)
> + {
> + struct xen_vnode_data *vnode_data = &layout->vnode_data[i];
> + u64 node_size = vnode_data->nr_pages << PAGE_SHIFT;
> +
> + node_size &= FAKE_NODE_MIN_HASH_MASK; /* 64MB aligned */
> +
> + if (i == (num_vnodes-1))
> + node_end_addr = max_addr;
> + else
> + {
> + node_end_addr = node_start_addr + node_size;
> + while ((node_end_addr - node_start_addr -
> + e820_hole_size(node_start_addr, node_end_addr)) < node_size)
> + {
> + node_end_addr += FAKE_NODE_MIN_SIZE;
> + if (node_end_addr > max_addr) {
> + node_end_addr = max_addr;
> + break;
> + }
> + }
> + }
> + /* node_start_addr updated inside the function */
> + if (setup_node_range(i, nodes, &node_start_addr,
> + (node_end_addr-node_start_addr), max_addr+1))
> + BUG();
> + }
> +
> + printk(KERN_INFO "XEN domain numa emulation - setup nodes\n");
Is this neccessary? Can be it be debug?
> +
> + memnode_shift = compute_hash_shift(nodes, num_vnodes, NULL);
> + if (memnode_shift < 0) {
> + printk(KERN_ERR "No NUMA hash function found.\n");
> + BUG();
Wow. BUG? What about just bailing out and unset xen_pv_emulation flag?
> + }
> + /* XXX: Shouldn't be needed because we disabled acpi_numa very early ! */
> + /*
> + * We need to vacate all active ranges that may have been registered by
> + * SRAT and set acpi_numa to -1 so that srat_disabled() always returns
> + * true. NUMA emulation has succeeded so we will not scan ACPI nodes.
> + */
> + remove_all_active_ranges();
> +
> + BUG_ON(acpi_numa >= 0);
> + for_each_node_mask(i, node_possible_map) {
> + e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
> + nodes[i].end >> PAGE_SHIFT);
> + setup_node_bootmem(i, nodes[i].start, nodes[i].end);
> + }
> + xen_init_slit_table(layout);
> + xen_init_numa_array(layout);
> + return 0;
> +}
> #endif /* CONFIG_NUMA_EMU */
>
> void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn)
> {
> int i;
> + struct xen_domain_numa_layout *numa_layout = &pv_numa_layout;
> +
> + int xen_pv_numa_enabled = numa_layout->max_vnodes;
>
> nodes_clear(node_possible_map);
> nodes_clear(node_online_map);
>
> #ifdef CONFIG_NUMA_EMU
> + if (xen_pv_domain() && xen_pv_numa_enabled)
> + {
> + if (!xen_numa_emulation(numa_layout, start_pfn, last_pfn))
> + return;
> + }
> +
> if (cmdline && !numa_emulation(start_pfn, last_pfn))
> return;
> nodes_clear(node_possible_map);
> diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
> index ecb9b0d..b020555 100644
> --- a/arch/x86/xen/enlighten.c
> +++ b/arch/x86/xen/enlighten.c
> @@ -83,6 +83,8 @@ void *xen_initial_gdt;
> */
> struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info;
>
> +struct xen_domain_numa_layout *HYPERVISOR_domain_numa_layout;
> +
> /*
> * Flag to determine whether vcpu info placement is available on all
> * VCPUs. We assume it is to start with, and then set it to zero on
> @@ -1089,6 +1091,7 @@ static void __init xen_setup_stackprotector(void)
> pv_cpu_ops.load_gdt = xen_load_gdt;
> }
>
> +extern struct xen_domain_numa_layout pv_numa_layout;
> /* First C function to be called on Xen boot */
> asmlinkage void __init xen_start_kernel(void)
> {
> @@ -1230,6 +1233,12 @@ asmlinkage void __init xen_start_kernel(void)
> xen_start_info->console.domU.evtchn = 0;
> }
>
> + {
> + struct xen_domain_numa_layout *layout =
> + (void *)((char *)xen_start_info +
> + xen_start_info->numa_layout_info.info_off);
> + memcpy(&pv_numa_layout, layout, sizeof(*layout));
> + }
Shouldn't there be a check to see if the Xen actually exports
this structure? Otherwise you might copy garbage in and set
pv_numa_layout values to random values.
> xen_raw_console_write("about to get started...\n");
>
> /* Start the world */
> diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
> index 612f2c9..cb944a2 100644
> --- a/arch/x86/xen/setup.c
> +++ b/arch/x86/xen/setup.c
> @@ -281,6 +281,9 @@ void __init xen_arch_setup(void)
> printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
> disable_acpi();
> }
> +
> + acpi_numa = -1;
> + numa_off = 1;
> #endif
>
> /*
> diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h
> index 812ffd5..d4588fa 100644
> --- a/include/xen/interface/xen.h
> +++ b/include/xen/interface/xen.h
> @@ -398,6 +398,53 @@ struct shared_info {
>
> };
>
> +#define XEN_NR_CPUS 64
No way to share this with some other variable? Like NR_CPUS?
> +#if defined(__i386__)
> +#define XEN_BITS_PER_LONG 32
> +#define XEN_BYTES_PER_LONG 4
There gotta be some of these defined in other headers.
> +#define XEN_LONG_BYTEORDER 2
> +#elif defined(__x86_64__)
> +#define XEN_BITS_PER_LONG 64
> +#define XEN_BYTES_PER_LONG 8
> +#define XEN_LONG_BYTEORDER 3
> +#endif
> +
> +/* same as cpumask_t - in xen and even Linux (for now) */
> +#define XEN_BITS_TO_LONGS(bits) \
> + (((bits)+XEN_BITS_PER_LONG-1)/XEN_BITS_PER_LONG)
> +#define XEN_DECLARE_BITMAP(name,bits) \
> + unsigned long name[XEN_BITS_TO_LONGS(bits)]
I am pretty sure there are macros for this laready.
> +struct xen_cpumask{ XEN_DECLARE_BITMAP(bits, XEN_NR_CPUS); };
> +#ifndef __XEN__
Is that neccessary? typedefs are frowned upon in kernel.
> +typedef struct xen_cpumask xen_cpumask_t;
> +#endif
> +
> +#define XEN_MAX_VNODES 8
> +struct xen_vnode_data {
> + uint32_t vnode_id;
> + uint32_t mnode_id;
> + uint64_t nr_pages;
> + /* XXX: Can we use this in xen<->domain interfaces ? */
> + struct xen_cpumask vcpu_mask; /* vnode_to_vcpumask */
> +};
> +#ifndef __XEN__
> +typedef struct xen_vnode_data xen_vnode_data_t;
Ditto.
> +#endif
> +
> +/* NUMA layout for the domain at the time of startup.
> + * Structure has to fit within a page. */
> +struct xen_domain_numa_layout {
> + uint32_t max_vcpus;
> + uint32_t max_vnodes;
> +
> + /* Only (max_vnodes*max_vnodes) entries are filled */
> + uint32_t vnode_distance[XEN_MAX_VNODES * XEN_MAX_VNODES];
> + struct xen_vnode_data vnode_data[XEN_MAX_VNODES];
> +};
> +#ifndef __XEN__
> +typedef struct xen_domain_numa_layout xen_domain_numa_layout_t;
Ditto.
> +#endif
> +
> /*
> * Start-of-day memory layout for the initial domain (DOM0):
> * 1. The domain is started within contiguous virtual-memory region.
> @@ -449,6 +496,13 @@ struct start_info {
> unsigned long mod_start; /* VIRTUAL address of pre-loaded module. */
> unsigned long mod_len; /* Size (bytes) of pre-loaded module. */
> int8_t cmd_line[MAX_GUEST_CMDLINE];
> + /* The pfn range here covers both page table and p->m table frames. */
> + unsigned long first_p2m_pfn;/* 1st pfn forming initial P->M table. */
Why is this added in this patch? That doesn't look to be used by your
patch.
> + unsigned long nr_p2m_frames;/* # of pfns forming initial P->M table. */
Ditto.
> + struct {
> + uint32_t info_off; /* Offset of console_info struct. *
> + uint32_t info_size; /* Size of console_info struct from start.*/
Wrong comment.
> + } numa_layout_info;
> };
>
> struct dom0_vga_console_info {
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home