i have grub2 also here and i have add dummy=foo before root...
xm dmesg
])
(XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000
(XEN) [VT-D]dmar.c:548: Host address width 39
(XEN) [VT-D]dmar.c:557: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fbfff000
(XEN) [VT-D]dmar.c:326: endpoint: 0:1b.0
(XEN) [VT-D]dmar.c:557: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fbffe000
(XEN) [VT-D]dmar.c:331: IOAPIC: f0:1f.7
(XEN) [VT-D]dmar.c:331: IOAPIC: 0:13.0
(XEN) [VT-D]dmar.c:386: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:561: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:446: RMRR region: base_addr ec000 end_address effff
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.7
(XEN) [VT-D]dmar.c:561: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:417: RMRR error: base_addr bf7dc000 end_address bf7dbfff
(XEN) Failed to parse ACPI DMAR. Disabling VT-d.
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2672.800 MHz processor.
(XEN) Initing memory sharing.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM1)
(XEN) I/O virtualisation disabled
(XEN) CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 1/2 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Thermal monitoring enabled (TM1)
(XEN) CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 2/4 eip 8c000
(XEN) Initializing CPU#2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Thermal monitoring enabled (TM1)
(XEN) CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 3/6 eip 8c000
(XEN) Initializing CPU#3
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Thermal monitoring enabled (TM1)
(XEN) CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 4/1 eip 8c000
(XEN) Initializing CPU#4
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#4.
(XEN) CPU4: Thermal monitoring enabled (TM1)
(XEN) CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 5/3 eip 8c000
(XEN) Initializing CPU#5
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#5.
(XEN) CPU5: Thermal monitoring enabled (TM1)
(XEN) CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 6/5 eip 8c000
(XEN) Initializing CPU#6
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#6.
(XEN) CPU6: Thermal monitoring enabled (TM1)
(XEN) CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 7/7 eip 8c000
(XEN) Initializing CPU#7
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#7.
(XEN) CPU7: Thermal monitoring enabled (TM1)
(XEN) CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Total of 8 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 8 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU6 resumed
(XEN) microcode.c:73:d32767 microcode: CPU4 resumed
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) microcode.c:73:d32767 microcode: CPU5 resumed
(XEN) microcode.c:73:d32767 microcode: CPU7 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) Brought up 8 CPUs
(XEN) HPET: 4 timers in total, 0 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x82a000
(XEN) elf_parse_binary: phdr: paddr=0x182a000 memsz=0xe5108
(XEN) elf_parse_binary: phdr: paddr=0x1910000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x1911000 memsz=0x15ca0
(XEN) elf_parse_binary: phdr: paddr=0x1926ca0 memsz=0x1a9360
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1ad0000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81926ea0
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES =
"!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff81ad0000
(XEN) virt_entry = 0xffffffff81926ea0
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1ad0000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 00000001b4000000->00000001b8000000 (114688 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81ad0000
(XEN) Init. ramdisk: ffffffff81ad0000->ffffffff81ed7400
(XEN) Phys-Mach map: ffffffff81ed8000->ffffffff81fd8000
(XEN) Start info: ffffffff81fd8000->ffffffff81fd84b4
(XEN) Page tables: ffffffff81fd9000->ffffffff81fee000
(XEN) Boot stack: ffffffff81fee000->ffffffff81fef000
(XEN) TOTAL: ffffffff80000000->ffffffff82400000
(XEN) ENTRY ADDRESS: ffffffff81926ea0
(XEN) Dom0 has maximum 8 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff8182a000
(XEN) elf_load_binary: phdr 1 at 0xffffffff8182a000 -> 0xffffffff8190f108
(XEN) elf_load_binary: phdr 2 at 0xffffffff81910000 -> 0xffffffff81910888
(XEN) elf_load_binary: phdr 3 at 0xffffffff81911000 -> 0xffffffff81926ca0
(XEN) elf_load_binary: phdr 4 at 0xffffffff81926ca0 -> 0xffffffff819a4000
(XEN) Scrubbing Free RAM:
.......................................................done.
(XEN) Xen trace buffers: disabled
(XEN) tmem: initialized comp=0 global-lock=0
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three times to switch
input to Xen)
(XEN) Freed 156kB init memory.
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=2, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1431: dom0: pirq 0 or irq 3 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 4 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 5 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 6 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 7 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 8 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 9 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 10 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 11 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 12 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 13 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 14 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 15 already mapped
(XEN) allocated vector for irq:16
(XEN) irq.c:1431: dom0: pirq 0 or irq 16 already mapped
(XEN) allocated vector for irq:17
(XEN) irq.c:1431: dom0: pirq 0 or irq 17 already mapped
(XEN) allocated vector for irq:18
(XEN) irq.c:1431: dom0: pirq 0 or irq 18 already mapped
(XEN) allocated vector for irq:20
(XEN) irq.c:1431: dom0: pirq 0 or irq 20 already mapped
(XEN) allocated vector for irq:21
(XEN) irq.c:1431: dom0: pirq 0 or irq 21 already mapped
(XEN) allocated vector for irq:22
(XEN) irq.c:1431: dom0: pirq 0 or irq 22 already mapped
(XEN) allocated vector for irq:23
(XEN) irq.c:1431: dom0: pirq 0 or irq 23 already mapped
(XEN) allocated vector for irq:24
(XEN) irq.c:1431: dom0: pirq 0 or irq 24 already mapped
(XEN) allocated vector for irq:25
(XEN) irq.c:1431: dom0: pirq 0 or irq 25 already mapped
(XEN) allocated vector for irq:26
(XEN) irq.c:1431: dom0: pirq 0 or irq 26 already mapped
(XEN) allocated vector for irq:27
(XEN) irq.c:1431: dom0: pirq 0 or irq 27 already mapped
(XEN) allocated vector for irq:28
(XEN) irq.c:1431: dom0: pirq 0 or irq 28 already mapped
(XEN) allocated vector for irq:29
(XEN) irq.c:1431: dom0: pirq 0 or irq 29 already mapped
(XEN) allocated vector for irq:30
(XEN) irq.c:1431: dom0: pirq 0 or irq 30 already mapped
(XEN) allocated vector for irq:31
(XEN) irq.c:1431: dom0: pirq 0 or irq 31 already mapped
(XEN) allocated vector for irq:32
(XEN) irq.c:1431: dom0: pirq 0 or irq 32 already mapped
(XEN) allocated vector for irq:33
(XEN) irq.c:1431: dom0: pirq 0 or irq 33 already mapped
(XEN) allocated vector for irq:34
(XEN) irq.c:1431: dom0: pirq 0 or irq 34 already mapped
(XEN) allocated vector for irq:35
(XEN) irq.c:1431: dom0: pirq 0 or irq 35 already mapped
(XEN) allocated vector for irq:36
(XEN) irq.c:1431: dom0: pirq 0 or irq 36 already mapped
(XEN) allocated vector for irq:37
(XEN) irq.c:1431: dom0: pirq 0 or irq 37 already mapped
(XEN) allocated vector for irq:38
(XEN) irq.c:1431: dom0: pirq 0 or irq 38 already mapped
(XEN) allocated vector for irq:39
(XEN) irq.c:1431: dom0: pirq 0 or irq 39 already mapped
(XEN) allocated vector for irq:40
(XEN) irq.c:1431: dom0: pirq 0 or irq 40 already mapped
(XEN) allocated vector for irq:41
(XEN) irq.c:1431: dom0: pirq 0 or irq 41 already mapped
(XEN) allocated vector for irq:42
(XEN) irq.c:1431: dom0: pirq 0 or irq 42 already mapped
(XEN) allocated vector for irq:43
(XEN) irq.c:1431: dom0: pirq 0 or irq 43 already mapped
(XEN) allocated vector for irq:44
(XEN) irq.c:1431: dom0: pirq 0 or irq 44 already mapped
(XEN) allocated vector for irq:45
(XEN) irq.c:1431: dom0: pirq 0 or irq 45 already mapped
(XEN) allocated vector for irq:46
(XEN) irq.c:1431: dom0: pirq 0 or irq 46 already mapped
(XEN) allocated vector for irq:47
(XEN) irq.c:1431: dom0: pirq 0 or irq 47 already mapped
(XEN) tmem_relinquish_page: failing order=6
(XEN) tmem_relinquish_page: failing order=6
(XEN) tmem_relinquish_page: failing order=6
(XEN) tmem_relinquish_page: failing order=6
(XEN) tmem_relinquish_page: failing order=6
(XEN) tmem_relinquish_page: failing order=6
(XEN) tmem_relinquish_page: failing order=6
(XEN) tmem_relinquish_page: failing order=6
(XEN) tmem_relinquish_page: failing order=6
(XEN) tmem_relinquish_page: failing order=3
(XEN) tmem_relinquish_page: failing order=3
(XEN) tmem_relinquish_page: failing order=3
(XEN) tmem_relinquish_page: failing order=3
(XEN) tmem_relinquish_page: failing order=3
(XEN) tmem_relinquish_page: failing order=3
(XEN) tmem_relinquish_page: failing order=3
(XEN) tmem_relinquish_page: failing order=3
(XEN) tmem_relinquish_page: failing order=3
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00000900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:07.0
(XEN) PCI add device 00:14.0
(XEN) PCI add device 00:14.1
(XEN) PCI add device 00:14.2
(XEN) PCI add device 00:14.3
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.2
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.2
(XEN) PCI add device 00:1c.3
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 02:00.0
(XEN) PCI add device 06:00.0
(XEN) PCI add device 05:00.0
(XEN) PCI add device 04:00.0
(XEN) PCI add device 04:00.1
(XEN) allocated vector for irq:19
(XEN) Set CPU acpi_id(1) cpuid(0) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(2) cpuid(1) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(3) cpuid(2) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(4) cpuid(3) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(5) cpuid(4) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(6) cpuid(5) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(7) cpuid(6) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(8) cpuid(7) Px State info:
(XEN) _PPC: 0
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=16, irq=16
(XEN) ioapic_guest_write: new_entry=0001a910
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=23, irq=23
(XEN) ioapic_guest_write: new_entry=0001a917
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=19, irq=19
(XEN) ioapic_guest_write: new_entry=0001a913
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=18, irq=18
(XEN) ioapic_guest_write: new_entry=0001a912
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=18, irq=18
(XEN) ioapic_guest_write: new_entry=0001a912
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
Pasi Kärkkäinen wrote:
>
> On Tue, Jan 05, 2010 at 06:43:05AM -0800, Fantu wrote:
>>
>> I have asus p6t se (bios 0608 with vt-d enable) with core i7 920, nvidia
>> 9800
>> gt and nvidia 8600 gt for passthrough.
>> I have installed lenny 64 bit with xen 4 from hg unstable and kernel
>> 2.6.31.6 pv_ops from git but i was not been able to make vt-d working.
>> can you help me to resolve, please?
>>
>
> Please post your "xm dmesg" log.. let's start with that.
>
> -- Pasi
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
>
--
View this message in context:
http://old.nabble.com/Memory-mapping-for-PEG-PCIe-Graphics-Passthrough-to-%3Cany%3E-DomU-tp22783371p27062451.html
Sent from the Xen - Dev mailing list archive at Nabble.com.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home