WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-devel

Re: [Xen-devel] Xen Paravirt Operations Domain 0 Serial Console Problem

To: "Mr. Teo En Ming (Zhang Enming)" <enming.teo@xxxxxxxxxxxxxxx>
Subject: Re: [Xen-devel] Xen Paravirt Operations Domain 0 Serial Console Problem
From: Pasi Kärkkäinen <pasik@xxxxxx>
Date: Mon, 24 Aug 2009 19:44:16 +0300
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx
Delivery-date: Mon, 24 Aug 2009 09:44:38 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
In-reply-to: <4A92BD31.2040406@xxxxxxxxxxxxxxx>
List-help: <mailto:xen-devel-request@lists.xensource.com?subject=help>
List-id: Xen developer discussion <xen-devel.lists.xensource.com>
List-post: <mailto:xen-devel@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/mailman/listinfo/xen-devel>, <mailto:xen-devel-request@lists.xensource.com?subject=unsubscribe>
References: <4A92BD31.2040406@xxxxxxxxxxxxxxx>
Sender: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
User-agent: Mutt/1.5.13 (2006-08-11)
On Tue, Aug 25, 2009 at 12:17:53AM +0800, Mr. Teo En Ming (Zhang Enming) wrote:
> Hi All,
> 
> I have tried to configure serial console for Xen hypervisor, dom 0 
> kernel and Linux login but it does not seem to be working.
> 
> Here is my grub configuration for serial console:
> 
> title Fedora (2.6.31-rc6-enming.teo) Serial Console
>         root (hd0,0)
>         kernel /xen.gz iommu=1 com1=115200,8n1 console=com1
>         module /vmlinuz-2.6.31-rc6-enming.teo ro 
> root=/dev/mapper/vg_fedora11_host-lv_root selinux=0 console=ttyS0,115200
>         module /initrd-2.6.31-rc6-enming.teo.img
> 

http://wiki.xensource.com/xenwiki/XenParavirtOps

paste from that page:


Working example grub.conf with serial console output: 

title pv_ops dom0-test (2.6.29-rc7-tip) with serial console
        root (hd0,0)
        kernel /xen-3.3.gz dom0_mem=1024M loglvl=all guest_loglvl=all 
com1=19200,8n1 console=com1
        module /vmlinuz-2.6.29-rc7-tip ro root=/dev/vg00/lv01 console=hvc0 
earlyprintk=xen
        module /initrd-2.6.29-rc7-tip.img


> Is the above configuration correct? On my Intel Desktop Board DQ45CB, I 
> have a COM1 header on the PCB and I have connected an external serial 
> port to this header and also enabled COM1 in the BIOS.
> 
> After selecting the above entry in GRUB still on VGA, a cursor at the 
> top left corner of the monitor shows up, which means Xen and Dom 0 
> kernel are booting up on the serial console and not on VGA.
> 
> However, after some time, a login prompt finally displays on my VGA 
> monitor! Isn't it NOT supposed to show up on VGA and should show up in 
> serial console instead?
> 

You also need to have the gettys configured properly.

-- Pasi

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel